Student lost ability to audition loops within the loop browser

Colleagues,
My students were composing songs using GarageBand 3.0.4 in our Mac Lab.
Two of my students showed me that, after they'd laid down three or four tracks by dragging loops into the main window, they could no longer get loops to play inside the loop browser. They would click on a loop, and nothing would happen.
The loop would play once it was clicked and dragged into the window, but it would not play from inside the loop browser.
Does anyone have any idea what my students might have done that could cause them to be unable to audition loops from within the loop browser?
Thanks in advance for any insight you might be able to provide.
Paul Daniels
Pennridge Central MS
144 North Walnut Street
Perkasie, PA 18944

Just drop them on the Loop Browser and the rest should be taken care of.

Similar Messages

Adding loops to the loop browser.

I'm using mac os 10.4.11. I have placed all my loops on an external hard drive.
1) Are only apple loops allowed to be added or aiff loops in general as well?
2) when adding loops to the loop browser should one add an entire folder if they are in a folder or just the files within a folder? I added a folder of flutes but can not find flutes anywhere in the loop browser file list.
3) As I didn't want the loops within the jam pack voices, and rhythm section installer packages to be added to garageband I removed the loops folders from the packages, and dropped them onto the loop browser. When looking in the jam pack management it shows the rhythm section but not the voices. When I again attempted to drop the voices folder it said it was already there, although I still can't see it.
4) Once I understand how to do this correctly should I trash the loop browser apple loops index file and re-drop all the loops on the browser again to get everything cataloged correctly?
Thank you,
Robert

Select "Add to Loop Library" from the Edit menu!

How to avoid the loop inside the loop? as it reduces the performance.

hi masters,
i have 2 internal tables having 1 same field. eg table itab having f1, f2, f3 fields and itab1 having f1, f4 and f5 fields. let us consider the data in the itab and itab1 is like below given
itab-f1   itab-f2   itab-f3                 itab1-f1     itab1-f4   itab1-f5
10        aa         11                      10             abc       456
10        bb         15                      10             def        655
10        ff           13                      10             ghi        456
11        dd         16                      10             tre         455
11        zz         24                      11             ftr          256
11        ii           54                      11             kjh         556
12        hh         24                      12             fjk          751
now i want the result in final table like below
f1         f2       f3         f4         f5
10        aa      11      abc      456
10        aa      11      def       655
10        aa      11      ghi       456
10        aa      11      tre       455
10        bb      15      abc      456
10        bb      15      def       655
10        bb      15      ghi       456
10        bb      15      tre       455
10        ff        13      abc      456
10        ff        13      def      655
10        ff        13      ghi      456
10        ff        13      tre       455
11        dd      16      ftr        256
11        dd      16      kjh      556
11        zz      24      ftr       256
11        zz      24      kjh      556
11        ii        54      ftr       256
11        ii        54      kjh      556
12        hh      24      fjk       751
i can get this result using the
Loop at itab.
loop at itab1 where f1 = itab-f1.
process....
endloop.
endloop.
but it is very slow. i want to avoid this loop inside the loop and i want to implement the same program using read table.. like below..
Loop at itab.
Read table itab1 with key ....
process...
endloop.
Is it possible? to get multiple records from itab2 using read statement or with READ statement that using CASE Statement or IF statemetnt.
Plz help me...

hi,
please try the following code
TYPES:
begin of ty_itab2,
   f1
   f2
   f3
   f4
   f5
end of ty_itab2.
DATA:
lw_tab2tmp type ty_itab2,
lt_tab2tmp type standard table of ty_itab2.
sort it_itab by f1.
loop at it_itab into lw_itab.
at new f1.
    CLEAR lt_tab2tmp[].
    loop at it_itab1 into lw_itab1 where f1 = lw_itab-f1.
      CLEAR lw_tab2tmp.
      move-corresponding lw_itab1 to lw_tab2tmp.
      append lw_tab2tmp into lt_tab2tmp.
    end loop.
    "while there is no data with f1 in it_itab1
    if lt_tab2tmp is initial.
      lw_tab2tmp-f1 = lw_itab-f1.
      append lw_tab2tmp into lt_tab2tmp.
    endif.
end at.
CLEAR lw_tab2tmp.
MOVE-CORRESPONDING lw_itab to lw_tab2tmp.
modify lt_tab2tmp from lw_tab2tmp TRANSPORTING f2 f3 where not f1 is initial.
append lines of lt_tab2tmp into lt_itab2.
end loop.
lt_itab2 is the final table.
There may be some syntactically errors.
I have not a system to test it now, please test it.

Auditioning samples in the media browser?

The media browser in Logic is great, the answer to a lot of my problems. However, when auditioning samples in an already busy project, it plays the sample through a random channel, providing no evidence as to which one, and applies all the effects of that channel.
So i will be auditioning say for a kick and i'll be thinking 'these kicks sound a bit weak' then when i listen to them in finder they are massive but an eq or something is being applied from whatever channel in logic it has chosen to play through. easy enough if i could see which channel it was (though not ideal) i could just disarm all the effects of that channel, but only the master faders show any activity??

45rpm wrote:
There would normally be no EQ or effects on the prelisten channel strip, but it's possible that this channel strip is missing for some reason, and then some other strip would be used. But click the "All" button like Vacheto said, and watch for a meter lighting up in the Mixer window as you audition samples in the media browser. Then you'll know if Prelisten is being used, or some other channel strip.
I'm sorry, but I what's the new you are trying to explain unless you repeat what I have said before - the is no additional of useful info !
Such posts of you only high-jack the useful posts of the other participants in this forum and make it difficult to read or you just spend the users time - keep in mind mate !
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Oracle Reports: Opening within the same browser all the time

Hi there,
I am running Oracle Report 10g using Oracle AS 10.3.
The report output is PDF to a browser.
Each time I run the report, it opens within the same browser.
Is there an option to open the report in a new browser all the time.
http://server_name:port_number/reports/rwservlet?server=report_server_name&recursive_load=NO&paramform=NO&destype=CACHE&desformat=pdf&report=report_name.rep&orientation=portrait&paramter1=1
Thanks for any help.
Jim

I guess you run the report from a form using WEB.SHOW_DOCUMENT? If so, use '_blank' as second parameter, this will open the given url in a new window.
btw.. if you use forms to start a report you may consider to use RUN_REPORT_OBJECT to start the report instead of using the url-syntax.

I can't find converted apple loops in the loop browser within Logic pro 7

Hello There.
I've cereated some apple loops with the apple loops utility. unfortunately I am unable to find them in the loop browser within Logic pro 7.2.1.
I've scaned them using the project manager " so Logic knows about them"
but still didn't reflect in the loop browser.
Is this the normal behavior or what am I doing wrong.
I hope I am doing something wrong, as to me the main feature of the loop browser is to be able to audition the loops quckly at the song tempo.
Thanks a lot in advance
Cheers
P.S searched in the Forum but the answers arn't very clear
Powerbook G4 Mac OS X (10.4.7) 1.67 Mhz 2gig Ram

Just drop them on the Loop Browser and the rest should be taken care of.

Creating Apple loops within the arrange window

I have tried this before and had the same result again and again.
I have a stereo recording of a drum kit at 120 bpm which I have chopped to a 2 bar cycle and want to turn it into an apple loop. to fit it into the song I am working on which is at 100 bpm.
I select "add to apple loops library" from the Region drop down menu in the arrange window. the apple loops genre selection window opens which adds it to the apple loops browser. easy!
But when I drop the loop back into the arrange window onto an Audio track within the same song which is 100bpm, it stays at the original tempo and doesn't snap to the bar. but still loops stretches and does what an apple loop should do but at the wrong tempo. what is that all about?

with an extra note to my comment above
if you've dropped the loop from the apple loop browser to the arrange window you then have to open it again in apple loop utility to sort it out by selecting "open in apple utility" from the Audio drop down menu on the arrange window which gives you a chance to edit it properly and now I have a decent loop. but then I have to save it again in the initial menu "add to apple loops" which I have to reclassify it again I thought it'd be a good idea to actually get rid of the first menu choice "add to apple loops" window and just have a window within logic which uses the same engine as apple loops utility and uses the same audio channel (the Last enabled channel in the Environment to Audition the loop because now when Apple loop utility opens the core Audio gets confused and comes out of my comuter speaker and then after a few cycles comes out of the Interface. I think there are too many "menu this", "loop utility that's" going on in logic. I do hope Logic 8 is going to trim away all the excess Lard which Logic has gained since mac took it off Emagic.

3rd Part Loops in the Loop Browser

Hello all!
I purchased a bunch of M-Audio percussion loops and installed them (or thought I did). Only I set of loops is listed in the loop browser drop down menu ant it's only listing 2 loops! I found 2 other folders of loops in my home folder/audio/user loops folder. They appear to be incomplete as well and they DO NOT show up in the loop browser menu in GB or Logic. I e-mailed M-Audio about it and they say that there might be multiple locations for these loops depending on what version of GB I'm using (3).
Anyway, what do I do now? Should I trash the loops in the user folder and then try a reinstall? If I do, can I put them in some other folder that GB can access from within GB?
Thanks,
Paul

First suspect:
http://www.bulletsandbones.com/GB/GBFAQ.html#missingloops

Problem previewing loops in the loop browser in Logic 8

Loops are only audible when the sequencer is not playing.
When the sequencer is playing, the selected loop shows it's playing in the loop browser window, but I cannot hear it.
ANY ANSWERS?
NOTE:
All my outputs in logic (including the loop browse strip) are routed to SPDIF OUT as I have a DynAudio digital speaker system.
Thanks in advance,
Hennie

I have found if you wait long enough, you will hear the file begin to play. Sometimes the delay can several seconds. Not acceptable IMO.

Loop within a loop

is there anything wrong with this code
clear wa_bseg.
loop at t_final into wa_final.
loop at t_bseg1 into wa_bseg where belnr = wa_final-belnr
                               and   gjahr = wa_final-gjahr.
*and   zfbdt = wa_final-zfbdt.
if sy-subrc eq 0 .
wa_final1 = wa_final.
append wa_final1 to t_final1.
clear wa_final1.
endif.
clear wa_bseg.
endloop.
*clear wa_final.
endloop.

Hi,
Instead of using loop within loop , use read statement within loop it will improve program performance.
try this below logic..
clear wa_bseg.
loop at t_final into wa_final.
read table t_bseg1 into wa_bseg with key belnr = wa_final-belnr
                                                            gjahr = wa_final-gjahr.
if sy-subrc eq 0 .
   wa_final1 = wa_final.
   append wa_final1 to t_final1.
endif.
clear: wa_bseg, wa_final1,wa_final.
endloop.
Regards,
N M Poojari.
Edited by: Nilambari Poojari on May 27, 2008 9:06 AM

When I Drag Loops To The Loop Browser...

All my loops are in the folder /Library/Application Support/GarageBand/Apple Loops. I dragged them over from the finder to the loop browser in GB, and it looks like it copied all of them to another folder user/Library/Audio/Apple Loops/User Loops/GarageBand/Apple Loops. ***?! What a mouthful. Is this the new default location for all of my loops? Can I change that? Can I erase the Application Support/Garageband folder now? I would like to reclaim the 12+ GB of space.

As far as I can make out GB needs to store your loops in both Application Support and Audio. The Application Support/GB folder also contains other resources, such as software instruments and channel presets etc., so DON'T DELETE IT!!
In the Audio folder the GB loops will normally be stored in Apple Loops/Apple/Apple Loops for GarageBand, not in the User Loops Folder. When you dragged them to the browser, GB thought they were a new set of loops and put them in User Loops; so as long as they are still in Apple Loops/Apple/Apple Loops for GarageBand, go ahead and delete them from the User Loops folder. Like I said above, GB seems to store the loops in two locations by default (no Idea why), and I think it's best not to screw around with stuff in the Library under OSX.
BTW, why did you drag them to the browser in the first place? Had they not appeared there when you installed?

Apple Loops and the Loop Browser

maybe I'm missing something here, but whenever I save an edited audio file (or loop) with Apple Loops I can never seem to find the same file in the Loop Browser.
(unless that is how the app is suppose to behave ...)
I assumed the Loop Browser behaves somewhat like Logic's Project Manager, referencing and finding files that are associated with Logic Sessions.
Long story shot, how can i save my edited Apple Loop files and still find them using the Loop Browser
Thanks.

The additional content is not just the loops. It is also all the samples for the instruments etc.
You are correct, however, in the method of moving the loops.

How to pass a value from inside a while loop outside the loop

Hello to everybody, I have been searching through the forum but I have not found a certain answer for my problem. I would try to explain my problem as breefly as posible:
I have to send by a BNC2120 two signals and acquire an other one thats comes from a preassure sensor. That part is done by introducing simulating and acquiring DAQmx inside while loops.It is sycronized by my self, proving such diferent values (is not the optimum, but is only the first prototype) and works as I expected. Well, then I want to sample some of the values of these signals, that is done with relays and local variables to get the value in the instant I want to sample. Here begin my problems: I want to extract the sample values out of the while loops without restarting them, I mean: I do not want to stop the while loops because the acquisition and the generation of the signal must be continuous, but I do not know if it is posible to put the while loops in "standby" until I operate with the values I have sampled and then the signal generator and the acquiere continues from when it has stoped before. Particulary I want to obtain the value of the top while loop (inside a case) when the counter arrives at 15.
I have proved to do with local variables, global variables, making a state machine, with event cases, with flat secuences...I have been reading about and proving diferent posible solutions for this week and the whole past week and I have not found the solution.
If any of you know how I can do this thing, I would be loved to listen your opinions. My proyect is above:
Thank you a lot in advance.
Sinceresly,
Miguel.
Attachments:
maq_estados_event_case.vi ‏239 KB

It definately sounds like what you really want is a Producer/Consumer. It is an architecture that uses Queues to pass data from a data generation loop (producter, your DAQ loop) and a data processor (consumer).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

I'm Still Looping - End the looping!!

I wrote an earlier post, received a good suggestion, and
found that it isn't working for me. I created a slideshow that has
the following characteristics:
1. An embedded .swf title graphic that appears on the first
and last slide. I want it to play once than hold, but it just keeps
looping.
2. Each slide has text and a picture that fades in over 120
frames. I'm using Timeline effects to fade-in the picture. I'd like
the picture to fade in, then remain visible. What happens is that
the pictures just keep looping.
I've unchecked loop in Dreamweaver properties when I inserted
the flash graphic. I've also tried to "uncheck" all the loop
options.
A kind responder suggested that I use action script to insert
stop() in a keyframe at the end of the graphic's frames, but this
isn't working - the Timeline effects don't play at all with this
command insterted.
Help.

Post the FLV and it will be easier to answer. At the end of
each movie clip you just need to add a keyframe and put in a
stop();
Make sure the stop is on a keyframe at the end of the of the
movieclip, don't just click on the last frame and add the
actionscript. It has to be keyframed or it will use that stop(); on
every frevious frame.
If that isn't working then something else is causing the
error.

Why does my Acrobat Pro 9 PDF print driver either lock up or become confused as to where it should store a file when printing a document from within the Firefox browser?

I use Adobe Acrobat Pro 9.4.5 for creating .pdf files on a Windows XP SP3 platform. Firefox 6.0.2 is my browser of choice. This question only applies to the .pdf printing process. All other printer drivers work fine with this version of Firefox.
In attempt to save paper, I choose to print most documents in an electronic .pdf format using the PDF print driver and save them to my USB drive. Before upgrading my Firefox version to 6.0.2 this process seemed to work fine but after upgrading the .pdf print process seems to be experiencing problems. This particular printing process will cause Firefox to lock up when the distiller tries to print the file to what I believe is a temporary folder under the Adobe folder. When it does this I am sometimes able to force it to complete the process but frequently it will only produce a log not a .pdf file. On other occasions the distiller will just lock up mid print without producing any kind of error message. In both cases I will frequently have to use Windows Task Manager to break out of the process which then shuts down the Firefox browser. I don't seem to have any problems when I use Internet Explorer to perform the same function. As far as I am aware I am running the most current drivers as Adobe automatically pushes down updates to me as they become available. Any ideas how I can overcome this issue or is it inherent to the new version of Firefox?

The PDF file itself does not control the "print as image" preference, which should always be turned OFF unless there's a specific need to rasterize the entire page, and is turned off by default in all Acrobat and Adobe Reader installations.
What's the filetype for the ultralight font and what export setting* are you using in ID? If you're exporting to earlier than PDF1.7, OpenType fonts will be converted and may experience some small changes in shape if their hint definitions aren't done right.
*As a side note, bear in mind that InDesign does not use any part of Acrobat when exporting PDFs, so questions specific to that stage in the process should be posted to the InDesign forums.

Student lost ability to audition loops within the loop browser

Similar Messages

Maybe you are looking for