Students see ALL in What's New-Site Wide

We are a K12 school district, and I have all users setup in Filr with mostly default settings. My concern is when a student logs in and goes to the What's New section, then Site Wide, they can see EVERYTHING that was modified. This includes documents that they do not have rights to. In eDir they do not have rights to teachers home directories, not other students' home directories, but they can see any document that was modified in these folders. Am I missing a setting that would only allow them to see modifications made to documents that they have network rights to?

dgreenholt wrote:
> Thanks for the tip - I was able to find an old trustee right that
> should not have been there. I removed it and now the students can
> only see what they have actual rights to.
As a side note, this is exactly the type of thing that Novell File
Reporter can help you find. I've been talking to many customers lately
about NFR and how it can help with Filr planning and troubleshooting.
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

Similar Messages

How come i cant see my Cameras in the new site

Why have the new site up when you have to use the odl site to see anything!!!

Maybe:
iTunes Store: Invalid, inactive, or illegible codes
Next contact iTunes
Apple - Support - iTunes - Contact Us

Airport Utility can't see all my devices after new cable modem

Everything worked fine until I got a new cable modem from Comcast—it's a Cisco DPC3000. Now after firing that up, I can get to the web on my Mac Pro but my LAN seems to be missing. Airport Utility can see the AEBS (Base Station) that's connected to the cable modem but it can't see a second AEBS that's in my wife's office (wired to the Base Station in Bridge mode), or an Airport Express that's hooked up to my music system, or a second Airport Express that's used to extend the WIFI to a second bedroom. All these things worked fine previously—I could see them all in Airport Utility and I could access all those devices.
Any ideas will be much appreciated—been dealing with this most of the day.
Thanks
Peter

Well what do you know...after a week, it just magically decides to work, without even using Airport Utility.
Boy are these Airports touchy....and unreliable.
I still want to know: What makes these things drop in and out???

Whne I clear all history it does not clear the address bar, I still can click on the right side and see all of my past web sites

I am using the newest version, and have done a clear recent history with all boxes checked

Entries in the location bar drop down list with a yellow (blue on Mac) star at the right end are bookmarks.<br />
You can remove such a bookmarked item that shows in the list if you open that url in a tab and click the yellow star in the location bar.<br />
This will open the "Edit This Bookmark" dialog and you can click the Remove button to remove the bookmark if you want to remove such a bookmarked entry.<br />
* [[Clearing Location bar history]]
* [[Cannot clear Location bar history]]

New site created in iWeb, Podcast works, but the Subscribe button doesn't!

Hi All,
I created a new site in iWeb at http://www.adamonearth.com be great if you could help out a little! I am very happy with the site turned out!
But I have been trying to get the Video Podcast subscription link to work for a while now, but the Podcast Subscribe button on my Video Podcast page does not work. For some reason iWeb adds in /adamonearth.com after the website domain, like this... itpc://www.adamonearth.com/adamonearth.com/Video%20Podcast/rss.xml
So if you go to my site at http://www.adamonearth.com and click onto Video Podcast the Subscribe button is on there.
iWeb won't allow me to edit it either. Be great if you know of any ideas to amend it!
Also be great if you let me know what you think of the site overall.
Cheers.
Adam.
iMac G5 Mac OS X (10.4.9)
iMac G5 Mac OS X (10.4.9)

Hi Tom,
Thanks so much for all your help, I really appreciate it.
I fixed the name of the site and called it 'Holly' I now have the Video Podcast link working but one problem, when you enter the website address:
http://www.adamonearth.com
It goes to the Index Of/ page then you need to select 'Holly' which is the folder name for it to divert to the Welcome.html page.
I have put up a directory listing for you http://www.adamonearth.com/54512.tiff
I have tried moving the Welcome.html page above the Holly folder but that then does not link to the other pages correctly.
From what I can see I have done everything right this time, as the Podcast link works in iTunes now.
Any help would be great.
Thanks again,
Adam.

Is it possible to increase the size of text windows in 4.0.1 (if, for instance, I am typing a long email and want to see all of it at once).

I visit forums that use vBulletin, and when I post or private message within, I like to be able to see all of what I write. In some other browsers, and Firefox too I thought, you could resize those windows (has that little triangle shape with dots at the bottom right). In fact, I just noticed that little triangle is here in this particular text box, but does not ever show when I am using a vBulletin text box. Is there an add-on I could get to allow me to resize text boxes when using vBulletin sites?

On the vBulletin 4 sites I use, I have my preference set to the "Standard" editor (the one where you insert BBCode markup to make text bold or italic) instead of the "Enhanced" (WYSIWYG or "rich text") editor. The Standard editor does have a little resizer in Firefox 4 (see attached), but the Enhanced editor does not.
Often rich text editors are not actually normal form controls but complicated editing systems that simulate a form. That could explain why there isn't a resizer already. But one probably could be built. Could be a good application for a Greasemonkey userscript.

Creating new site collection using wsp template fails

Hi all,
I'm creating new site collections using a wsp solution generated by "save as template".
For site collection creation I select "<Select template later>" then I upload the wsp solution.
Everything worked until last month, now after CU installation (agoust 2014) I get an error:
"List does not exist. The page you selected contains a list that does not exist. It may have been deleted by another user."
Does anyone know how to solve it?
Thanks
Maurizio

ULS contains a lot of those errors:
System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>,
StackTrace:
in Microsoft.SharePoint.SPWeb.GetList(String strUrl)
in Microsoft.SharePoint.SPWeb.TryGetListByUrl(String url)
in Microsoft.SharePoint.SPFieldElement.PerformFixUpIfLookUpField(Guid fieldId, XmlNode xmlNodeOfAField, SPWeb web)
in Microsoft.SharePoint.SPFieldElement.ElementActivated(SPFeaturePropertyCollection props, SPSqlCommand sqlcmdAppendOnly, SPWebApplication webApp, SPSite site, SPWeb webNull, Boolean fForce)
in Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionFieldsAndContentTypes(SPFeaturePropertyCollection props, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean fForce)
in Microsoft.SharePoint.Administration.SPElementDefinitionCollection.ProvisionElements(SPFeaturePropertyCollection props, SPWebApplication webapp, SPSite site, SPWeb web, SPFeatureActivateFlags activateFlags, Boolean fForce)
in Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean fForce)
in Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly)
in Microsoft.SharePoint.SPFeatureCollection.AddInternalWithName(Guid featureId, Int32 compatibilityLevel, String featureName, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean
fMarkOnly, Boolean fIgnoreMissing, SPFeatureDefinitionScope featdefScope)
in Microsoft.SharePoint.SPFeatureManager.EnsureFeaturesActivatedCore(SPSite site, SPWeb web, String sFeatures, Boolean fMarkOnly, Boolean fIgnoreMissing)
in Microsoft.SharePoint.SPFeatureManager.<>c__DisplayClass7.<EnsureFeaturesActivatedAtWeb>b__6()
in Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken userToken, Boolean bResetContext, WaitCallback code, Object param)
in Microsoft.SharePoint.SPFeatureManager.EnsureFeaturesActivatedAtWeb(Byte[]& userToken, Guid& tranLockerId, Int32 nZone, Guid databaseid, Guid siteid, Guid webid, String sFeatures, Boolean fIgnoreMissing)
in Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String&
bstrWebTemplate, Int32& plWebTemplateId)
in Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String&
bstrWebTemplate, Int32& plWebTemplateId)
in Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId)
in Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1&
featureDependencyErrors)
in Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors)
in Microsoft.SharePoint.SPWeb.ApplyWebTemplate(String strWebTemplate)

What's new in FCE4 ?

Hi all !
What's new in FCE4 ?
Is there support for multi-Camera as in FCP ?
Is the colorcorrector three wheel and three pipetts black/grey/white as in FCP ?
Yours inquisific Bengt W

Hi Tom
Thanx for Your answer.
Think the joy of the two mentioned is so great that I would like Express users to have them.
Real timesavers.
only two Cameras - but what a joy to edit this way.
Yours Bengt W

What's new in MDS 2014

Hi ALL !
What's new in MDS 2014 ?
from Moscow with money

Hi,
I've spent a significant amount of time looking to answer this question for you. My conclusion is there is not a significant amount of difference between SQL 2012 and SQL 2014 surrounding Master Data Services.
The fact that that the following free publication does not mention MDS changes is evidence of this; -
Introducing Microsoft SQL Server 2014
Please also look at further links; -
What's New in SQL Server 2014
Important New Features in SQL Server 2014
Where was also a very significant change between MDS 2008 R2 and MDS 2012.
I hope this helps,
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Apple TV stuck on What's New or Verification Required screen after v5.1 update

After updating my 2 Apple TV 3 to v5.1, my Apple TVs no longer respond to remote commands though I do get a blink response from the boxes when selecting. The atvs periodically blink, the screens go black and return me to the screen that was up when it went black. In one case, it's the What's New screen. In the other, the Verification Required screen. I only got to the Verification screen by a lucky remote recognition after unplugging the atv and plugging it back in.
I have not tried restoring from iTunes. Cannot locate any of my microUSB cables. Any suggestions or solutions?

I have this problem too. It actually seems like the "What's New" screen is in front of the regular menu/navigation.
My original remote broke, and I've been using the Remote app. If I swipe left and right, i can hear the clicks. If I press to select, it sounds like I might be choosing an item from the menu... which I can't see because the "What's New" screen is in front and won't go away!

I have saved a FB-site and can not any longer see all the pictures on that saved site. What to do?

I do not have FB myself but a friend saved some FB-sites for me with text and pictures.
At first I could not see all the pictures. Then my friend told me to download Mozilla Firefox and I also noticed that I had to be online to see all the pictures. Otherwise I could only see a few of them.
Suddenly my problem came back although I use Mozilla Firefox and are online.
I don´t think that I have changed anything. What can the problem be. What do I need to do?

Hi,
Please try a '''Ctrl''' + '''F5''' refresh. You may also have to '''Clear Now''' the '''Cache''', '''Site Preferences''' , and '''Cookies''' with '''Time range to clear''' set to '''Everything''' via '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History].
Please note that as the file is permanently saved in your PC, and if the picture/content location changes, or is deleted on the site then you may not be able to access it.
You can also reset Firefox and check though this would not help if the location has been changed/deleted.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
If you would like to take a listing of the add-ons, changed preferences/settings etc. to quickly replicate the previous profile, please '''Copy all to clipboard''' (on the left of the reset button), and paste it into MS Office Excel, or OpenOffice/LibreOffice Calc, or notepad. However, it would be a good idea to check for the existence of the issue immediately after the reset.
If you are able to view all the pictures again, it would also be a good idea to re-save the site as MHT or MAFF using either [https://addons.mozilla.org/en-US/firefox/addon/unmht/?src=search UnMHT] or [https://addons.mozilla.org/en-US/firefox/addon/mozilla-archive-format/?src=search Mozilla Archive Format]. Additionally you may also want to save another copy after choosing '''Work Offline''' via '''File''' ('''Alt''' + '''F''') and you can later check both the saved files when not connected to the internet and keep one that is complete.

I am trying to set up a new site and dreamweaver is incorporating all the files in my drive into the site agout 9GB what do i do it never did this before version cs3

What do I do it has never happened to me befor

You need to set up a site definition before you can use DW...
http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/
Without that critical first step, as you've seen, the program gets a little cranky with you.
Here's a print version specifically for DWCS3...
http://www.vineyardesigns.com/resources/dreamweaver/define_site.shtml

Some of my bookmarked sites such as aol and facebook, look like This, suddenly: 0 1 45 Send a New Message Messages See All Messages0 unread Notifications See All Notifications Pati Beardsley Home Use Facebook as:

0
1
45
Send a New Message
Messages
See All Messages0 unread
Notifications
See All Notifications
Pati Beardsley
Home
Use Facebook as:

0
1
45
Send a New Message
Messages
See All Messages0 unread
Notifications
See All Notifications
Pati Beardsley
Home
Use Facebook as:

Can't see my "new site"

I have created a website, then created new pages, sure I can do that, but now, after creating a "New Site", and I can see it and edit it in iWeb, but when i go into iWeb on my "new site" and go "view published site" . . . I cannot see it published... I keep getting this error "We're sorry but we can't find the iWeb page you've requested. It's possible that.." So I put it in as a link to this site I can't see, as a reference off my home page, but it STILL get the same error! Why would this be? I could post my website if that will help solve the problem...
Is there a limit to the number of "sites" one can create in iWeb?
Thx...

Actually, upon MORE review... the only page that DOES work off my site is my welcome page!!! http://web.mac.com/thetopspot/TopSpot_JocelynKish/Welcome.html what is going on?!?
After saving and "publishing", it says "do you want to visit site"... sure, all looks good, but obviously it is not working!??!?

Restrict a user to see All site content link on quick lanuch

Hi
how to restrict a user (who has only view permissions ) to see All Site Content Link on quick lanuch
adil

You can find your answer in the following thread. You will have to rely on Audience targeting.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2b61ae45-77ca-4e80-88dd-98eed32d23b8/sharepoint-2010-hide-some-quick-launch-links-on-some-groups?forum=sharepointdevelopmentprevious
Given its a long thread I have copied Hemendra's reply below which I think is what you should be doing.
Go to site settings-->navigation-->click shared documents and click edit from menu.-->Now see the audience section and put users/group there who can view it.
Here is how to add a new Audience
http://technet.microsoft.com/en-us/library/cc262169(v=office.14).aspx
Amit

Students see ALL in What's New-Site Wide

Similar Messages

Maybe you are looking for