Studio Build out I need advise

I acquired some space and am about to build it out. I need your advise. I am thinking 2x4 lumber, sheetrock walls with dead air spacing between walls for professional additional "sound" proofing (between walls), also double walling for control room Dual glass and so fort. Can you guys please help me out with advise. Is there maybe a good solid comprehensive book just for studio building/remodeling? I hope that if there is, it sticks to the core facts and information, I am not interested in Protons, neutrons, or Atoms,
Thanks in advance

Dead air and mass absorb sound and provide isolation. The dead air concept is what double-wall construction is based on. How far apart the walls are spaced will have a bearing on what frequencies are absorbed. "Floating" the walls and floor on dense rubber blocks provide two-way isolation (see http://auralex.com/soundisolation_uboat/sound_isolationuboat.asp ). The concept of mass stopping sound: imagine covering a wall with either lead sheeting or cloth of equal thickness to try to stop sound from passing through. Which will absorb more sound? Of course the lead will, because it's denser, i.e., has more mass. But instead of lead you could use rubber sheeting (see http://auralex.com/cstudio_construction/c_studioconstruction.asp ).
So that's soundproofing and isolation, and they're related to but still very different from acoustically treating a room with quadriatic diffusers, foam to absorb high frequency reflections, etc.
Advice? Hire a studio designer or at least consult with one. I believe that Auralex and some of the other similar companies offer consultation services. Meanwhile, educate yourself on the fundamentals of sound proofing and acoustic treatments. Oh, wait, you're doing that already by posting!
Best of luck!
Message was edited by: iSchwartz

Similar Messages

  • New office build out | router recommendation

    I'm currently helping build out a new office and trying to find the best router for the job. My main concern is ensuring it can handle the WAN line(s) we have coming in. When I looked at the 2921 series it seems to have a throughput max of 75Mbps and with our lines totalling 800Mbps I'm wondering how 'big' of a router we'll need.
    Here's some of the details that should give a rough idea of our needs. Our requirements are pretty basic at the moment but we would like to start to build our a reliable network infra as we're quiclkly expanding the business (20 -> 60 employees in 6mo thus far)
    300Mbps 1:1 - BT Fibre
    100Mbps 1:1 - Virgin
    100 person max office size
    2-3 VPNs into datacentre's
    eventual deployment of our own VoIP network (currently managed by buildings VoIP)

    Disclaimer
    The   Author of this posting offers the information contained within this   posting without consideration and with the reader's understanding that   there's no implied or expressed suitability or fitness for any purpose.   Information provided is for informational purposes only and should not   be construed as rendering professional advice of any kind. Usage of  this  posting's information is solely at reader's own risk.
    Liability Disclaimer
    In   no event shall Author be liable for any damages whatsoever (including,   without limitation, damages for loss of use, data or profit) arising  out  of the use or inability to use the posting's information even if  Author  has been advised of the possibility of such damage.
    Posting
    Attachment has good performance information for the current ISRs.
    If you're going to have WAN Ethernet handoffs, L3 switch might be an option.
    PS:
    BTW, the 7301 you mention is 1 Mpps (and a 7201 is 2 Mpps).

  • SD Process Design for Plantation industry - need advise

    Hi all experts,
    I am implementing for a crude palm oil plantation company, in which the general flow of the sales process from Estate to the Milling Plant is as below:
    Sales Order --> Delivery Order* --> PGI --> Billing*
    Sales Order: The fresh fruit bunches (FFB) is harvested and then the amount required by the Buyer is fulfilled via creation of a sales order.
    Delivery Order: At this stage, it will interface with the Weighbridge system to carry out the recording of delivery quantity. Truck without the FFB is weighed once at entrance of the estate, and truck with FFB is weighed at exit at estate.
    PGI: Goods Issue is carried out with the recording of the actual quantity from the weighbridge interface back to SAP.
    Billing: The billing doc is created based on PGI quantity done.
    This looks pretty straightforward, but there are few concerns from the above process as highlighted in the asterisk (*) section:
    Issues:
    1. During the Delivery portion, data of the Driver, name, person loading and weight loaded need to be recorded at the same time to carry out the incentive payment to the drivers (both internal and external drivers) with incentives calculated on per tonnage basis.
    2. Secondly, during Billing process, the amount payable would be calculated based on the grading of the FFB + the which year the FFB is planted (i.e. different year would have different pricing per ton).
    Need advise on how to make the above two issues work smoothly along with the process above.
    Opinion, comments and feedbacks is much appreciated.
    Thanks.

    The loader and driver data is integrated to PP and the HR master module is leveraged to maintain driver/loader data master and payment is made to driver via customized program with customised calculation of salary.
    The FFB is handled using PP module for Production and material posted via MIGO in MM and increases stock take manually.
    SD to handle sales of finished goods instead..

  • I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version?

    I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version? I ask because this is not an upgrade, but a completely new version.

    I'm with Jim on this.  It always seems to work out better if you do not install over another version.  You can use this app (freeware - thanks to Jon Chappel) to completely remove ALL Final Cut Studio apps and components: http://www.digitalrebellion.com/fcsremover/
    Once that's done, install your newly purchased version.
    -DH

  • Auto slide transition after build out?

    I'm trying to make several items on the page cleanly dissolve out and then have the slide transition automatically to the next slide. I haven't been able to figure out how to do this.
    I can't set the automatic transition to a time because this presentation is going to an exec who will be talking and fielding questions and there's no way to anticipate how long the slide will need to be up.
    It seems like the build out needs something like a callback function where it can execute something on build complete. Any way to do this? (Or at least request it as a feature in iWork '11?)

    To make sure I understand you correctly, you want to have the text and/or images on the screen and then after all the questions, have the exec click which will fade out the text/images and then a slide transition. Is that correct?
    If so, what you have to do is make sure the build out is set to happen on click and set the transition to Automatically. The transition will not happen until the last build out is complete.

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • I am programming a DVD-Rom in DVD Studio Pro 4 and need to display and open pdf files, any suggestions?

    I am programming a DVD-Rom in DVD Studio Pro 4 and need to display and open pdf files, any suggestions?

    http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=22% 26section=9%26tasks=true

  • I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

    I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina

    Priscilla,
    if your Mac is still in warranty, then you should contact the Argentinian technical support service. If it is out of warranty, then we can try to lend a hand. (We’re just fellow Apple product users here.)

  • I just paid almost $10 to create a pdf from a jpg file, but I did it so that I could edit it. Now I find out I needed a different Adobe package that would create the pdf AND let me edit it. What do I do now?

    I just paid almost $10 to create a pdf from a jpg file, but I did it so that I could edit it. Now I find out I needed a different Adobe package that would create the pdf AND let me edit it. What do I do now?

    Hi Marion,
    PDF pack is meant to convert files to pdf format, Here's the feature list : Convert Word to PDF, Convert PDF to Word & Merge PDFs | Adobe PDF Pack
    In order to Create, Convert, edit pdf files, one needs to purchase Acrobat Software, Here's a feature list of Acrobat Pro : Features, PDF documents | Acrobat XI Pro
    However, you can download a free 30 day trial of Acrobat software using the following link : https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    Regards,
    Rahul

  • Moto G 2014 on Prepaid Plan? I want to switch to a Smartphone and try things out, but need a phone with 32GB of memory and the 2014 has a card for it. When will the Moto G 2014 version be available for Prepaid plans?

    I want to switch to a Smartphone and try things out, but need a phone with 32GB of memory and the G 2014 has a card for it.
    When will the Moto G 2014 version be available for Prepaid plans?

    You can buy Applecare anytime before the 1 year warranty expires, so you could leave that to his discretion if you wanted, and he'd have 1 year to consider it.
    You can save ~$30 on the mini if you qualify for an educational or corporate discount. Office 2004 costs ~$145 with educational discount.

  • Oracle Procurement/Sourcing :- Need advise on an implementation design

    Dear Guru's,
    Need advise on an implementation design
    Problem Summary :-
    Our client(say "X") is contracted to perform certain business functions for their client (Say"Y")
    Say "X" is do sourcing (RFP,RFQ) functions till PO creation,receiving in a excel based custom application ( Not through oracle EBS) for client "Y".
    So "X" is not responsible for paying for those services and "Y" pays for those receipts.
    We want to implement Oracle EBS Advance procurement solution for their above functions and replace the custom application processes.
    But client "X" is not accepting advance procurement solution as they("X") are not paying for the services and they don't want to fit this solution in Oracle EBS as this may cause legal issues.
    Questions:-
    1. Whats the best design solution for this type of scenario to fit the custom process into Oracle EBS procurement ?
    2. Can we follow the sourcing implementation process(RFQ/RFP)-> PO Creation-> PO receipts-> AP Invoice matching in Oracle EBS and is there a way to nullify this transaction in Oracle so      that there will not be any legal issues? May be creating credit memo/AR invoice etc...
    Appreciate your help!
    Thanks
    Karthik

    Hi All,
    Once basic question on the centralized procurement model. Please advise.
    Scenario :-  Two OU(OU1- Requesting OU and OU2- Purchasing OU) Scenaio:-
    1
    Purchase Requisition in OU1
    2
    AutoCreate PO in OU2
    3
    Approve PO in OU2
    4
    Receive the material in INV1 of OU1
    5
    Supplier sends the invoice to OU2
    6
    Cost the transactions
    7
    Run ‘Create Intercompany AR invoices in OU2
    8
    Run ‘Auto Invoice Master Program in OU2
    9
    Run ‘Create Intercompany AP invoices in OU1
    10
    Run ‘Expense Report Import in OU1
    Question:-
    1. After step 5(Supplier sends the invoice to OU2) who will do the payment for supplier and what's the process?
    2. I could see the intercompany invoice process in further steps which creates invoices, but not sure on how supplier payments are paid.
       In which step the paymens(Supplier, Intercompany) are processed.
    Please advise!
    Thanks
    Karthik

  • Different transitions page build in and build out

    is there a way to create different transitions for page build in and build out in indesign?

    You are correct - that is not Indesign Terminology. I want to have a differnet page transiton when I arrive at page 2 then when I leave page 2. I want objects to animate in a particula waay when I arrive on page two, and those objects to animate away in a differnet way when I leave page 2. I can't seem to get a button to do animations AND then leave a page.

  • Building in and then building out

    I have a series of bullet points that I'd like to have build in then out one at a time so there's only one bullet at a time on a particular slide. When I try to rearrange the bullet points in the Build Order box of the Inspector it only allows me to move all the Build Ins or all the Build Outs but not one at a time. I'd like to have bullet one build in on the first click and then build out on the second click and same thing with the next two bullets. Is there a way to do this?
    Thanks,
    Marc

    Is there a way to do this? Yes.
    See the Build Inspector, select all the bullets, Build IN, and Delivery by Paragraph
    then
    select all the bullets, Build Out, and Delivery by Paragraph,
    then
    in the Drawer, start shuffling and altering the Start Build until you get what you want.
    Alternately, have each bullet item as a separate object (text block) (which is effectively what the above does) and manipulate as desired.
    Or
    have each bullet on a separate slide and just do a slide transition without builds.

  • It it possible to use "Build Out" actions in "Hyperlinks Only" mode?

    I'm trying to make a "Hyperlinks Only" keynote so that my students can navigate through exercises at their own pace.  So far so good.  However, I'm trying to make it more visually engaging.  I can use build-in's fine for a page, but build outs do not seem to work.  Keynote's inspector allows me to give an object a "build out" command OR an "action" command, but when the presentation actually runs, tapping the object just takes you immediately to the next slide without doing a build out or an action.
    Is this a bug?  Or is this something Keynote specifically does/can not do?  Or please say I'm just doing something wrong and you can show me the light.
    Thanks in advance.
    --Brandon

    Build in and build out work perfectly well.
    select the object on the slide then add the build in effect
    start the build to automatically after transition
    open the build order side panel by clicking more options
    build out:
    select build out and add the effect
    set start build automatically then add the amount of delay
    note that the build order has the build in listed first, and the build out is last

  • I am a small woman with huge wrist circumference, 177.6mm.  If I order the black men's stainless steel watch how can I take links out if needed?

    I am a small woman with huge wrist circumference, 177.6mm.  If I order the black men's stainless steel watch how can I take links out if needed?

    We are just users here, so we have no way of knowing...
    I am sure that any question that is not easily found at or from the Watch Store page > http://store.apple.com/us/watch < can be answered by this method (from the bottom of that page)
       Chat with a Specialist
    Get all your Apple Watch questions
      answered or get help finding the
    right watch. Call 1-800-MY-APPLE
    ÇÇÇ

Maybe you are looking for