Studio expanding network editing capacity. Any pointers/advice?

Hi guys.
I hope to catch some of you who know your IT as well as your editing!
I've been helping to grow the network infrastructure of a small studio, who are seeing an increasing requirement for space and performance and support for more edit desks, and I wondered if any of you might have any suggestions about my ideas below?
This is how things are at the moment (simplified):
Performance is sufficient, and things seem pretty balanced.
Idea A is to build a new storage server - a clone of the 1st, in order to spread the eggs into more baskets so to speak. If day to day the use is split over the 2 servers, there will be less bottlenecking at each one.
But there is a question of Media Cache. Our media cache is currently on the main server which also helps reduce load on the media storage array and means it doesn't need to be generated and duplicated as people hot-desk, and also saves storage in the backup (the entire volume is backed up nightly).
Media Cache would remain on one of these.
Idea B is to build a new server solely for Media Cache, and create more storage on the original server.
My question about idea B would be - in a general edit scenario with say 500gb of footage, what is accessed more, the original media or the cache?
Even if it's 50/50 in cache/media, a separate cache server would seem pretty beneficial (and cheaper).
I suppose another option is a combination of the 2 ideas - 2 media servers and a cache server.
What do you guys think?
Thank you for any help!

Any ideas anybody?

Similar Messages

Building/editing topology diagrams - any ideas/advice?

Hi,
I'd like to build a web application that is capable of displaying & editing topology diagram (e.g. a network diagram with applications too). Effectively to have a graphically web based means of allowing a user to add nodes & relationships to represent a topology such as the following [http://performancepointinsider.com/files/planning/planningtopology.png|http://performancepointinsider.com/files/planning/planningtopology.png] . So the model basically consists of nodes and relationships.
Any ideas/advice on how best to do this, e.g.:
Q1. Any open-source project that does something similar?
Q2. Best way of handling the graphical aspect of the application?
(e.g. prototype, extjs, etc?)
Thanks

Hi Eric,
I want to build topology diagrams in Flex 2. Is it possible? Are there any prototypes like TWaver built on Flex 2? Twaver is built on Flex 3 and i cant use it on Flex Builder 2....
P.S: I dont have Flex 3 SDK or Flex Builder 3 and i cant even avail it any time sooner.

My MacBook Air's storage is full. When I look at the storage, most of what is taking up the space is "other". I am not sure what these application or documents are but would like to reduce this so that I can store more pictures to edit. Any advice?

When I look at the storage, most of what is taking up the space is "other". I am not sure what these application or documents are but would like to reduce this so that I can store more pictures to edit. Any advice on how to find out what takes up this much space so that I can clear some off?

Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
What is "Other" and What Can I Do About It?- Apple Support Communities

After loading yosemite can't get permissions from any network PC - OK from MACs on network...any advice?

after loading yosemite can't get permissions from any network PC - OK from MACs on network...any advice?

would love to...way over my head so far...upgraded to Yosemite 10.10.2 - I have another MAC (motorola chipset...maybe 10.6?) and 3 PCs on the network...the older MAC linked up through the network just fine...
I can see the Yosemite MAC on the PCs...I can open customer file folders (I am a printer) from the shared drive...I can drag files (let's just call them PDFs, they mostly are) to the MAC customer file...but if I try to open them from the PC I get an error message that says permission denied - or may be in use by another user. There are no other users. After I uploaded to Yosemite, I noticed most if not all drives and or folders had permissions changed to either no access or to read only...I've changed as many as I could find...drives, and folders...I can open those same files if I'm on the yosemite mac...Here's the catch, though...I was on a different floor and that PC can open a PDF on the Yosemite...but the RIP that prints our large format prints now won't print those files (whole RIP locks up) unless they are first dragged to the PC desktop...then all is fine. I thought it was MAC upgrade oriented, but I do have a PC that halfway works...I'm really stymied...

Fail in installing Visual Studio 2005 Professional Edition in Windows 7

Hi,
I'm new in here. I've just got my Notebook Installed with WIndows 7 Enterprise 32 bit and I would like to install Visual Studio 2005 professional Edition(I've got the installer CD from the MSDN which is purchased in our Company) in my
notebook. There is an issue which often occured, it says:
A problem has been encountered while loading the setup components. Canceling Setup.
I've look up for the solution try lot of things to resolve the issue but no luck until now.
Any idea or experience to help me?
Thanks in advance for the help.

I also add you the log from dd_vserror80.txt :
[09/19/11,17:19:17] MSITOSIT: [2] CRootComponent::SetManager() - MsiGetActiveDatabase returned an invalid handle
[09/19/11,17:19:17] MSITOSIT: [2] ERROR processed; exception was thrown for retail build
Developer Comment: MsiGetActiveDatabase returned an invalid handle
Build Time: Thu Dec 11 15:04:18 2003
DWORD: 0
[09/19/11,17:19:17] setup.exe: [2] ISetupModule::SetManager() failed in ISetupManager::LoadSetupObjectGuid() : vs_setup.dll
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::LoadSetupObjectname() - Failed in call to LoadSetupObjectGuid() for strName: in file: vs_setup.dll
[09/19/11,17:19:18] setup.exe: [0] LoadComponent(), LoadSetupObjectName failure: vs_setup.dll
[09/19/11,17:19:18] setup.exe: [0] LoadComponent failed in ISetupManager::LoadComponentsFromDBObject(): vs_setup.dll
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::LoadDatabaseValues() - Failed in call to LoadComponentsFroMDBObjects()
[09/19/11,17:19:18] setup.exe: [2] CSetupManager::RunIntro() - Failed to Load Database Values
[09/19/11,17:19:50] setup.exe: [2] CSetupManager::RunLoadSetup() - Failed to Run the Intro
the log from dd_vsinstall80.txt :
[09/19/11,17:19:06] Setup.exe:
[09/19/11,17:19:06] Setup.exe: ========== Logging started ==========
[09/19/11,17:19:06] Setup.exe: =====================================
[09/19/11,17:19:06] Setup.exe: GetGlobalCustomProperty({481CEF9F-033A-11D3-ACE2-00C04F8EEBA1})
[09/19/11,17:19:06] Setup.exe: GetGlobalCustomProperty(B51015E7-26A5-4c8f-B871-26ABA9BEFB65)
[09/19/11,17:19:06] Setup.exe: Command line parameters: /LAUNCHER="C:\Users\M162601\AppData\Local\Temp\" /HWND="2821506" /NoExclude
[09/19/11,17:19:06] Setup.exe: entering ISetupManager::RunIntro()
[09/19/11,17:19:06] Setup.exe: LoadSetupDatabase()
[09/19/11,17:19:06] Setup.exe: CSetupManager::LoadSetupDatabase() - set InstalledFrom property to D:\setup
[09/19/11,17:19:06] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:06] Setup.exe: CSetupManager::LoadSuiteInfo() - we are in SP mode - no suiteinfo.dll is supported
[09/19/11,17:19:06] Setup.exe: Product Name:Microsoft Visual Studio 2005
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadSuiteRequirements
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : CheckSuiteBlocks
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadCommandLineMgr
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::LoadCommandLineMgr() completed
[09/19/11,17:19:06] Setup.exe: ISetupManager::RunIntro() : LoadSetupLog
[09/19/11,17:19:06] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:06] Setup.exe: ISetupManager::LoadSetupLog() completed
[09/19/11,17:19:06] UTILS::RunNGENAction: Started
[09/19/11,17:19:06] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue pause"
[09/19/11,17:19:07] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:07] Setup.exe: ISetupManager::RunIntro() : LoadManagers
[09/19/11,17:19:07] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:07] Setup.exe: inside ISetupManager::LoadUIManager()
[09/19/11,17:19:07] vs70uimgr: Entering InitializeModule() method.
[09/19/11,17:19:07] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:07] Setup.exe: CSetupManager::CopyTempFiles() - Installing setup files...
[09/19/11,17:19:07] Setup.exe: CSetupManager::InstallSetupFiles() starting
[09/19/11,17:19:07] Setup.exe: GetGlobalCustomProperty({39E467CB-8962-4AD8-99F9-864AFF183FD4})
[09/19/11,17:19:07] vs70uimgr: Entering ShowSmallProgress() method.
[09/19/11,17:19:13] Setup.exe: CSetupManager::CopyTempFiles() - Successfuly copied files to temp; rerunning Setup...
[09/19/11,17:19:14] Setup.exe: CSetupManager::CopyTempFiles() - Finished Rerunning Setup...
[09/19/11,17:19:14] Setup.exe: UnloadSuiteComponents()
[09/19/11,17:19:14] UTILS::RunNGENAction: Started
[09/19/11,17:19:14] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue continue"
[09/19/11,17:19:14] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty(AA4EEF91-FB37-4135-9B73-484B75DDAA42)
[09/19/11,17:19:14] Setup.exe:
[09/19/11,17:19:14] Setup.exe: ========== Logging started ==========
[09/19/11,17:19:14] Setup.exe: =====================================
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({481CEF9F-033A-11D3-ACE2-00C04F8EEBA1})
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty(B51015E7-26A5-4c8f-B871-26ABA9BEFB65)
[09/19/11,17:19:14] Setup.exe: Command line parameters: /LAUNCHER="C:\Users\M162601\AppData\Local\Temp\" /HWND="2821506" /NoExclude /CreatedTemp /NoExclude /InstalledFrom D:\setup
[09/19/11,17:19:14] Setup.exe: entering ISetupManager::RunIntro()
[09/19/11,17:19:14] Setup.exe: LoadSetupDatabase()
[09/19/11,17:19:14] Setup.exe: CSetupManager::LoadSetupDatabase() - set InstalledFrom property to C:\Users\M162601\AppData\Local\Temp\SIT41797.tmp
[09/19/11,17:19:14] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:14] Setup.exe: CSetupManager::LoadSuiteInfo() - we are in SP mode - no suiteinfo.dll is supported
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({1B3F6DC3-205F-11D3-A824-00C04FB1799F})
[09/19/11,17:19:14] Setup.exe: GetGlobalCustomProperty({383F0141-C682-4665-A69B-756E719C968D})
[09/19/11,17:19:14] Setup.exe: Product Name:Microsoft Visual Studio 2005
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Initializing Progress Dialog Thread
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Waiting for Initialization event...
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Setting loading init Event...
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Finished Setting loading init Event
[09/19/11,17:19:14] Setup.exe: CCoreEngine-Proc() - Entering Main Message Loop...
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Finished Waiting for Initialization event
[09/19/11,17:19:14] Setup.exe: CSetupManager::RunIntro() - Initializing Progress Bar
[09/19/11,17:19:14] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadSuiteRequirements
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : CheckSuiteBlocks
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadCommandLineMgr
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::LoadCommandLineMgr() completed
[09/19/11,17:19:14] Setup.exe: ISetupManager::RunIntro() : LoadSetupLog
[09/19/11,17:19:14] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:14] Setup.exe: ISetupManager::LoadSetupLog() completed
[09/19/11,17:19:14] UTILS::RunNGENAction: Started
[09/19/11,17:19:14] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue pause"
[09/19/11,17:19:15] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:15] Setup.exe: ISetupManager::RunIntro() : LoadManagers
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadDependencyMgr()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadCDInfoMgr()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadDiskInfoMgr()
[09/19/11,17:19:15] Setup.exe: inside ISetupManager::LoadUIManager()
[09/19/11,17:19:15] vs70uimgr: Entering InitializeModule() method.
[09/19/11,17:19:15] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: ISetupManager::RunIntro() : LoadDatabaseValues
[09/19/11,17:19:15] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({2C320A80-183E-4F7E-8832-66A0F5756221})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({B8A13F14-4BDE-4EC4-A53C-8E51FBB8261F})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({AA62DF98-3F2C-11D3-887B-00C04F8ECDD6})
[09/19/11,17:19:15] Setup.exe: GetCustomProperties()
[09/19/11,17:19:15] Setup.exe: get_CustomProperties()
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:15] Setup.exe: GetGlobalCustomProperty({E0875D42-A33D-4C64-81C9-167795F29CA4})
[09/19/11,17:19:15] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] MSITOSIT: ***ERRORLOG EVENT*** : CRootComponent::SetManager() - MsiGetActiveDatabase returned an invalid handle
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] MSITOSIT: ***ERRORLOG EVENT*** : ERROR processed; exception was thrown for retail build
Developer Comment: MsiGetActiveDatabase returned an invalid handle
Build Time: Thu Dec 11 15:04:18 2003
DWORD: 0
[09/19/11,17:19:17] Setup.exe: GetCustomProperties()
[09/19/11,17:19:17] Setup.exe: get_CustomProperties()
[09/19/11,17:19:17] Setup.exe: GetGlobalCustomProperty({8297A38B-6431-4F1D-9F6E-C3D371CEA383})
[09/19/11,17:19:17] Setup.exe: MoveLoadProgress()
[09/19/11,17:19:17] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:17] setup.exe: ***ERRORLOG EVENT*** : ISetupModule::SetManager() failed in ISetupManager::LoadSetupObjectGuid() : vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::LoadSetupObjectname() - Failed in call to LoadSetupObjectGuid() for strName: in file: vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : LoadComponent(), LoadSetupObjectName failure: vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : LoadComponent failed in ISetupManager::LoadComponentsFromDBObject(): vs_setup.dll
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::LoadDatabaseValues() - Failed in call to LoadComponentsFroMDBObjects()
[09/19/11,17:19:18] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:18] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::RunIntro() - Failed to Load Database Values
[09/19/11,17:19:18] vs70uimgr: Entering DisplayMessage() method.
[09/19/11,17:19:18] vs70uimgr: DisplayMessage_START:A problem has been encountered while loading the setup components. Canceling setup.
[09/19/11,17:19:18] Setup.exe: CCoreEngine-Proc() - Finished Main Message Loop
[09/19/11,17:19:50] vs70uimgr: DisplayMessage_END:A problem has been encountered while loading the setup components. Canceling setup.
[09/19/11,17:19:50] Setup.exe: AddGlobalCustomProperty
[09/19/11,17:19:50] setup.exe: ***ERRORLOG EVENT*** : CSetupManager::RunLoadSetup() - Failed to Run the Intro
[09/19/11,17:19:50] Setup.exe: UnloadSuiteComponents()
[09/19/11,17:19:50] UTILS::RunNGENAction: Started
[09/19/11,17:19:50] UTILS::RunNGENAction: starting "C:\Windows\Microsoft.NET\Framework\v2.0.50727\ngen.exe queue continue"
[09/19/11,17:19:51] UTILS::RunNGENAction: ngen.exe returned 0
[09/19/11,17:19:51] Setup.exe: GetGlobalCustomProperty(AA4EEF91-FB37-4135-9B73-484B75DDAA42)
Kindly to help me. I've done many things including the advice which is refer to:
http://social.msdn.microsoft.com/Forums/en/vssetup/thread/ebe334d3-c1ab-44ce-a449-b65940dac589
No luck at all..

Can I have two Time Capsules in the same network, use one as Time Machine and other to expand network?

I need to purchase a divice to expand my Wi-fi network. I was looking at the AirPort Extreme, but a friend has a brand new Time Capsule for sale. So, for the same price of the AirPort Extreme, I´m getting the Time Capsule.
I already own one and using it as Time Machine and wireless router. If I decide to purchase another TC would it have any conflict with the one that I already have?
Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?

If I decide to purchase another TC would it have any conflict with the one that I already have?
No
Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?
Yes. The important thing to remember is that the "extending" Time Capsule must be located where it can receive a strong wireless signal from your "main" Time Capsule.

Getting Ready to upgrade from 1.6 to 3.2 - any pointers?

We are getting ready to upgrade our servers and all our applications from 1.6.1.00.02 to either 3.1 or 3.2. I'm being asked to estimate the amount of time it will take for the remediation effort for all of our apps to make sure they are working properly in the new environment. (we have about 30 separate apps total I believe)
Does anyone have any pointers for me or things they've encountered when upgrading?
Thanks for any information or pointers that can be offered.
Edited by: user10312135 on Aug 4, 2009 12:56 PM

Hello,
Please tell us your first name, and update your Forum handle to something friendlier than user123… It’s easier for us that way.
>> We are getting ready to upgrade our servers and all our applications from 1.6.1.00.02 to either 3.1 or 3.2.
I believe the following still apply:
Re: Can I upgrade directly to 3.0 from 1.6 ?
Re: HTML-DB 1.6 upgrade to APEX 2.X or to 3.x
>> I'm being asked to estimate the amount of time it will take for the remediation effort for all of our apps to make sure they are working properly in the new environment
If you perform all the pre/post installation tasks, no remediation will be necessary. All the application should work right from the start.
Of course, now that options like AJAX, Interactive Reports and all the other enhancements of the new version will be available to you, it’s possible that you will want to enhance the functionalities of the current applications, but it’s your own choice.
Regards,
Arie.
Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.

E-studio 160 network printer does not work correctly in my office network

Hi Toshiba support team,
I'v got a Toshiba e-studio 160 network printer/scanner/fax in my office and I want that everybody in the office (network) has access to the printer and scanner functions of the e-studio without using a "Server computer" which should be connected to the local parallel port of the printer. In other words, the printer is connected over TCP/IP and a suitable RJ45 cable to my main-switch in the office.
The printer in configured with a valid IP-address but in my office I havn't got any WINS-server, so this configuration field is empty and unused. I tried several different methods but I can't get access to the Printer via TCP/IP. Just the "PING" command works correctly. I expected that the printer will appear in the Windows-File Sharing Folders, but it doesn't. By the way, all my computers are equipped with Microsoft Windows XP. I read somewhere in a board that a guy fixed this problem by using a program called "P2P" but I couldn't find something like this.
With the original Toshiba drivers it is only possible to operate this printer local or over a Windows Print-sharing function but I don't want that one machine is running all the time.
I hope anybody can help me with my issue.
Best regards,
Michael

Since this is a forum only for Toshiba notebooks and Options, I doubt someone will be able to help you.
But I found a special Toshiba page for Printers and Copiers.
http://copiers.toshiba.com/support/index.jsp
Maybe you will find some details there.
Good luck

Why Visual Studio 2013 express edition always show repair or uninstall when I open it??

I don`t know why my Visual Studio 2013 express edition always show repair or uninstall when I open it??
I install it yesterday and it worked fine, but today when I open it, its says repair or uninstall all the time.... Anyone know why?
Hellpppp

Hi,
I think your VS may have been corrupted. I suggest you click "repair" to repair your VS.
If it can't solve your issue, please use ISO file to reinstall it.
If you used a web installer, please download the ISO file from the website.
http://search.microsoft.com/en-in/DownloadResults.aspx?q=Visual+Studio+Express+2013
Before you reinstall it,please use this tool
http://support.microsoft.com/kb/841290 to verify hash of the ISO. Any discrepancy would indicate that the file was corrupted.
The sha1 value of ISO could be found in "Install Instructions".
If you have made sure your ISO file have no problem, please reinstall it.
If you have any further question, please feel free to let me know.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

What is SQL Studio. Do you have any idea ?

Hi
Please review this URL.
http://www.sapdb.org/7.4/sap_db_tools.htm
- What is SQL Studio. Do you have any idea ?
- I installed the same in my desktop ( Win XP). Unable to establish the connection to the database using my application login/pwd. Am I doing something wrong ?
- Do I have to install any other software for me to SQL Studio work. ?
- Where do I go and get more help ?
PS: I thought it is same like sqlplus but against SAP database, required application userid/pwd not the database login/pwd.
thanks
siva

Look at OSS [Note 386714 - SQL studio + Database Manager GUI installation|https://service.sap.com/sap/support/notes/386714]
Regards

Any pointers on locating an external HD?

I was able to see my external drive when I installed Lion. After I updated it however, I lost the ability to see it. It was a clone of my corrupted drive and I REALLY need the files on it. I saw it once already right after I installed Lion off the boot disk. I was even able to copy the user files I had on it! Any pointers on finding it again?
**I am able to see it on disk utility. I've tried to repair the drive (fail) and cannot repair or verify disk permissions. I have also repaired disk permissions and the disk on my internal HD**

While in Finder, check in Finder Preferences (Preferences in the Finder menu):
On the General tab, make sure that the item "External disks" has been checkmarked.
On the Sidebar tab, ditto.

Premiere and Media Encoder will will no longer export my edit to any file format.

This is on a Windows 8.1 PC.
The edit exported fine until I made one big mistake.
I created a Nested Edit to make a quick alteration.
Since then the following is now the case and I cannot go back to an earlier edit to fix this.
Premiere and Media Encoder will will no longer export my edit to any file format. Using either the Export Option or Media Encoder. Get a dialog that says "Unknown Error Compiling Movie"
There is nothing wrong with my footage. This edit worked fine and I export through Media Encoder many times until I made a Nested Edit within the Premiere Project.
I have tried all sorts of searches on the net for a fix to this but nothing seems to be current or indeed works.
Any help would be appreciated as this is a show stopper.

Thanks for the reply Mark, appreciated.
I have found a work around but it still leaves a long term issue for Adobe to fix.
As to your first solution:
1). The nested edit is already in its own timeline panel. It will not export or encode via media encoder. This is the problem.
2). I will try the KEM roll feature but I have a work around see following.
3). No I do not have a nested edit within a nested edit.
I did a lot of research on the net on this issue as it happened to a colleague of mine on his machine about two weeks ago. It took me six hours to get a fix and in his case there were six video clip that had read errors. When I overwrote those clips from the original backup master it fixed the problem. However I was never able to use Media Encoder again to export his project without it failing. I could only use the Export feature. Again he had used a nested edit in his project.
I my case I do not have any nested edits within a nested edit. All I did was drag my main edit onto the New Sequence icon at the bottom of the Project Bin. This of course created a nested edit in a new Timeline Panel which is what I wanted. I then slid the entire nested edit to the right in the timeline by two seconds as all a wanted to do was add two seconds of black at the head of the edit. That was it. From that point of creating the nested edit Media Encoder and the Export option failed every time with the fore mentioned error.
The final work around was one of those I found previous mention of during my research. I created a new clean Premiere Pro CC 2014 project, I then used the import option under the file menu. I imported only the original main edit which brought in that edit along with all the required footage. This would then export to disk using the Export feature. However, Media Encoder will still not encode this new edit, it fails the same way every time, 'Unknown Error Compiling Movie'.
As a test I loaded the old corrupt edit project back up and deleted the nested edit sequence completely and re-saved it. This had no effect and did not fix the problem. This particular project file will no longer export directly or via media encoder at all no matter what I do.
This seems pretty serious to me. I worked on this edit for a whole month without issue, encoding out roughs as a went without any issue, it was only yesterday after I made the nested edit that the project file is now useless as it will not encode out at all. Yes I have a work around and was able to salvage my project and get it rendered in time for my deadline but the fact I have a partially working Project that Media Encoder will not touch does not instill me with confidence for long term use of Premiere Pro if this is going to happen again.
Is there some place I can send this project file to Adobe to see if they can find out what is wrong with it? I am not the only person having this issue I have seen other post going all the way back through CS6 it seems.

HT4260 I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

Try resetting your modem. Power it down. Wait a moment, then power it up again. While it resets, do not change what is connected to it.
In another, though unrelated article, Apple recommends the following:
If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
This step really ought not be considered optional for the configuration you propose. If the problem persists after resetting your modem, reset everything else too.

Hi Any latest advice on spinning beach ball nightmare side Lion install. Happens when surfing with Safari, and i've tried Onyx etc RegardsRegards

Hi
Any latest advice on spinning beach ball nightmare since Lion install.
Happens when surfing with Safari, and i've tried Onyx etc
Regards

Hi
Any latest advice on spinning beach ball nightmare since Lion install.
Happens when surfing with Safari, and i've tried Onyx etc
Regards

(urgent)control file is missing, can any one advice me on this.

Hi Gurus,
Yesterday we had SAN storage problem from our unix admin and all the databases were down due to the san problem.
all the mount points are now ok and when i started one of the database i got this problem
idle> startup
ORACLE instance started.
Total System Global Area 524288000 bytes
Fixed Size 2030232 bytes
Variable Size 406848872 bytes
Database Buffers 109051904 bytes
Redo Buffers 6356992 bytes
ORA-00205: error in identifying control file, check alert log for more info
In alert log file i found this
ALTER DATABASE MOUNT
Wed Feb 7 00:01:28 2007
ORA-00202: control file: '/ora99/oradata/test10g/control01.ctl'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Wed Feb 7 00:01:31 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
please any one advice me how to mount my database, i am not having backup of contol file too...
thanks in advance

Did you multiplex the control file ? May be you have multiplexed on another file system with names like control02.ctl, control03.ctl... etc. If yes, just make a copy of control02.ctl and put in the location of control01.ctl. Also rename the copy of control02.ctl to control01.ctl and try to restart the database.
If only one control file was there, then you have to re-create the controlfile. Please go through the following docs.
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10759/statements_5003.htm
Also before doing anything, please take the backup of your database (ofcourse in this case it will be cold backup).

Studio expanding network editing capacity. Any pointers/advice?

Similar Messages

Maybe you are looking for