Studio Pro 2 and DVD+R Discs

Just wondering: Why can't I burn my DVD projects onto a DVD+R disc when using DVD SP2? Does it not support +R discs and the +/- R burners?

That may explain my problem.
I have a couple of external DVD recorders that can burn +/- DVD's, but my version 2 SP doesn't allow me to use my +R discs.
Thanks for your information. I see where SP4 does support +R discs also.

Similar Messages

Using dvd studio pro and getting language must differ message. Will not let me create disc. Help!

using dvd studio pro and getting language must differ message. Will not let me create disc. Help!

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

Lion kills SoundTrack Pro, DVD Studio Pro and Color

After installing Lion on my cloned boot drive FCP 7.0.3 runs but SoundTrack pro, DVD Studio Pro and Color return an error message indicating Lion can't run PowerPC programs. They also have a white slashed circle over them indicating they aren't compatible.
This wasn't a widely advertised restriction of Lion prior to its release.
I'm thankful I have a fully operating Snow Leopard installation.

I don't know why you would have the PowerPC-only versions installed on an intel machine? It's very weird, because they should be Universal. This may mean that you were running those apps using Rosetta under Snow Leopard, but Rosetta isn't installed with Lion. You should just re-install from the FCS3 DVD and the proper Intel versions will be placed in your Applications folder.
I just launched every FCS3 app under Lion and they all work fine, except for Cinema Tools (which unexpectedly quit.)

HT1338 i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

i purchased dvd studio pro and im trying to install it but when i go to click continue it gives me this "you cant open the application gestalt tool becasue powerpc applications are no longer supported" what does that mean and how can i fix this ?

I note this information from Wikipedia: "DVD Studio Pro was a high-end software tool published by Apple Inc. to allow users to create DVD masters to be sent out for replication at production houses. Its tight integration with other Apple applications allows users to take Final Cut Pro and Motion projects and render them into the DVD format without encoding to intermediary formats. This streamlines the production workflow and reduces overhead."
If that is your intent, finding a substitute program that will run on your Mac may not be as efficient. Others can advise you on alternatives, or you can post a new thread specifically with that question.
BTW: what Mac and what version of OS X?
If it is important to you to continue to use DVD Studio Pro, consider the option of installing Snow Leopard (with Rosetta) into Parallels on your Mac:
[click on image to enlarge]
Full Snow Leopard installation instructions are here.

Closed captioning issues DVD studio Pro and workflow

So I have been trying to attach a .scc file to a dvd for the optioin of closed captioning. (for 2 dyas now) I did figure out a workflow to make it happen but all the suggested workflows online and in the book did not work for me and I have no idea why.
I have a HD sequence 1440x1080. It has some old SD video in it as well.
The only way I was able to get a DVD with closed captioning was this workflow:
Go to HD sequence and select all in timeline so it is highlighted. Command (apple) C so it is copied.
Go to File> New Sequence.
Control click on new sequence and go to settings.
under general tab make sure that it is set to 720x480 with NTSC (3:2) chosen from the drop down menu
Pixel aspect is set to NTSC CCIR 601/DV and that anamorphic IS checked
dominance : lower (even)
frame rate 29:97
QT vid settings DV/DVCPRO-NTSC
audio 48 khz 16-bit channel grouped.
click OK
Then open SD sequence and command (apple) V to paste.
At this point I noticed that the SD video on the new SD timeline was expanded or blown up. I had to control click each SD shot in the timeline (or do one at a time) and control click> remove attributes. It gave me a few options to click and when those in dark font are clicked it will set your SD shots back to normal.
I tried Hightlighting the entire SD seauence and changing the attributes, but it effected the HD video also so it was easier to just adjust the SD shots in the SD timeline/sequence.
Now that everything was normal in my SD sequence, I exported out a QT video.
I opened up DVD Studio Pro and put my QT file in it. Went to DVD Studio Pro preferences in the top left corner and made sure that MPEG-2 SD tab was open
clicked 4:3 aspect ratio
Start was 00:00:00 etc.
and for me drop frame was clicked. (my video was shot drop framed)
click OK
Click Graphical view (or in outline view it would be tracks and video name) Click on Green "TV" looking item (for me I wanted the first play on it)
Then look in your inspector for the tab called "other"
Click on "other" tab and then where it says file.... click on choose. Navigate to where your .scc file is and hit ok
Burn your DVD and test it in QT and on a DVD player/TV to make sure the CC optioin turns off and on.
That is how I got it to work, but it was changed to a DV format and has some pixelation.
I read where many folks run their exported QT file from FCP in HD and open it in compressor and change it's size there and make a mpeg 2..Some send the video to compressor from the timeline to make a mpeg 2... some add the .scc file in compressor.... some run their SD file through compressor and change to mpeg 2. Personally I had NO LUCK in doing anything in compressor (after running 2 days of tests) converting to a mpeg 2 in the DVD folder settings,... in using any of the program and elementary streams under the formats folder. NOTHING worked with any type of mpeg 2 AS well as adding the .scc file to the video in either compressor or in DVD studio Pro.
WHY? Why did none of that compressor workflow work? Why didn't adding the .scc file work in DVD studio pro?
Anyone have any ideas?

You have two problems.
Converting your video to SD
Getting the .scc file to play nice
1st problem
I would export your HD sequence(self contained not QT conversion).
Many recommend and have had much success using Compressor to do the down convert(frame controls all set to best).
I prefer using FC to do the down convert. I find it more consistent. This adds a step but still prefer it. I re-import the HD file I just exported into my project and then create an appropriate SD sequuence. Since your HD sequence displays 16x9 you will want to create a SD anamorphic sequence (I do 720x486 but you can do 480 too). Add the HD file to the new SD seq and then render. Export an SD file and then convert for DVD.
2nd problem
I have not had success adding the .scc file in Compressor. It should work but OE and/or other factors have never allowed me to get this to work properly.
The .scc file is presumably made from your sequence time code or possibly the QT export TC depending on how you sent it out and what you got back. The .scc should be based on the sequence TC. By default tracks in DSP are set to zero based TC which will not reference the TC associated with the original sequence TC which was used to make your .scc file. You can change this by right-clicking(control-click) on the time area in the track and you should see an option for asset-based timecode. Once you have changed this try importing the scc file.

DVD Studio Pro and Motion won't work

I posted this in the Tiger forum and didn't get a solution so I'm trying here.
After installing Tiger DVD Studio Pro and Motion quit working.
Both applications open (in the menu bar at least), but neither one will open all of its windows and nothing happens when I click on anything in the windows that do open. Nothing's frozen (the menus still respond), but there are no windows to work in.
I booted into Panther from my Backup drive and DVD SP works, but Motion won't even startup.
I'm hurtin' here. Can anyone help?
I'm using DVD SP v2.0.5 and Motion v1.0.1 on a Dual 1.42 PowerPC G4 with 1.5 GB DDR SDRAM and an ATI RADEON 9600 Mac Edition video card.
Dual 1.42 PowerPC G4 Mac OS X (10.4.4) 1.5 GB DDR SDRAM and ATI RADEON 9600 Mac Edition

Got an answer in the DVD SP forum. Look for the same topic there if you need it.

TS3968 This also affect DVD Studio Pro and compressor.

This also affect DVD Studio Pro and compressor, that were useless after upgrading to Snowleopard. Prokit 7 solved the problem. How come it doesn't come automatically with software update? Lost two hours on a crashed DVD project and looking for this very simple solution. Love you Apple, but this time you let me down...
After updating to Snowleopard, FCP comes up with a warning about unsupported enablerfiles during start-up. Prokit 7 didn't solve that problem. Anybody...?

Right on, Eric.
I'm a devoted Windows man, but I must say that DVDSP is the best DVD authoring software I've tried so far.
As far as compressor goes, it depends what program you are exporting from and for what purpose. There are many options in there and I for instance found out that using something like a Photo JPEG compression rather than a DV PAL setting for a project that was all in DVD PAL gave a better output.
Compressor is a pretty big program and by trying different things out, you can probably find what you need.
Sounds like there could be a problem with your computer if everything comes out as crappy as you say...?
Good luck figuring it out or make your mpegs on PC's TMPGEnc. (He-he... )
4 x 2.5 GHz PowerPC G5 Mac OS X (10.4.8) 4.5 GB DDR2 SDRAM

I have a macbook pro, and my hard disc currently crashed. I lost everything on my computer, but luckily I have an iPod nano with all my music saved on it. How can I now transfer my music from my ipod to my mac?

I have a macbook pro, and the hard disc recently crashed. I lost everthing, but luckily i have my music saved on my ipod nano. How can I now transfer my music from my nano to my mac for free?

Hi there ovadia!
You can transfer the music purchased by your iTunes account from your iPod nano to your MacBook Pro by following the steps outlined in this article:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/HT1848
Thanks for using the Apple Support Communities!
Cheers,
Braden

DVD Studio Pro and LaCie D2 Drives (Error #6)

I saw this topic pop up in January and it was archvied before a solution had been posted. I too receive Error #6 when attempting to burn DVD's to the LaCie D2 Firewire Lightscribe drive... not just in DVD Studio Pro, but also in the brand new version of iDVD. I am able to burn the disc images from Toast 7 on the same drive with no problem.
This is not an isolated case. I'm quite sure of that now.
Apple? Anyone?

Hi:
Have you tried PatchBurn?
Hope that helps !
Alberto

DVD Studio Pro and Firewire DVD burner

Hi All,
I'm using DVD Studio Pro 3.0.2 and trying to burn a project on a firewire dual layer dvd+-r burner. I stick in a blank dvd-r and hit the burn button and it keeps telling me to insert acceptible dvd media. This drive does work, as I have used Toast to burn stuff on it. I do have a dvd burner in my powerbook, however it's an old burner and won't burn to the new 16x dvd-r's, so I don't have any discs for it. Any help would be great.
Thanks,
J Silverman
Mac OS X (10.3.9)

Did you author a DVD and now you are trying to burn it by using "build/format"?
If so, make sure you use a new disc because if you have tried to reuse this disc, it could have written a bit of information during the lead in, making the disc useless.
If it is a new disc, then just select Build/Format and when you are prompted to insert the disc, put it in.
Does your burner show up in the Output Device tab when you choose Build/Format?

Mac Pro and DVD Studio burner issues....

Hello-
We just got a new Mac Pro, installed Final Cut Studio 2 and for some reason when I go to burn a DVD in DVD Studio Pro I get the message of: No disc was found in the disc drive. Please insert acceptable DVD recordable media. I have tried 3 different brands of DVD's to make sure that it wasn't the brand we where using.
We tried burning a DVD in iDVD and it worked fine. I can place a disc or a dvd in the drive and it works..... I called tech support and they had no idea.
Has anyone else had this problem and/or a solution?
Thanks!

Hiya and good morning. Does the DVD Studio Pro (not running it myself) require a specific disk by any chance (anything in preferences?), such as -R OR +R or similar.
I take it, otherwise, your Mac Pro DVD writer is performing well? I could be an issue with that? Have you updated all firmware via software update?
Good luck.

Can i install Final cut studio 5 and DVD Studio Pro 4 on OSX lion

Is any body who can help me on giving me some direction on how to install Final Cut Studio 5.1 and DVD Studio Pro 4 on my OSX Lion, if it's doable. Thanks

The easiest way is to install Rosetta from a Mac OS X 10.6 DVD first.
There's also a way of doing it via Terminal that's been posted here a couple of times. A search should bring that up.
Edit: Found it... https://discussions.apple.com/message/21416133#21416133 read the second post.

DVB-C recorded DVDs to Final Cut Pro to DVD Studio Pro and Flash - how?

As a TV journalist I am recording my works with my DVB-C Receiver and a DVD-Harddisc-Recorder from LG. The movies are stored on the harddisc and I burn them to DVDs in order to work with the files on my computer. What progrograms do I have to use in order to get file out of the DVD-vobs, that Final Cut Pro can read an work with. DVB-C is MPEG-encoded, right? But I don’t want to loose quality and don’t want to encode the material several times? In Final Cut I want to get rid of commerials and cut severel movies together that were broadcasted on several days. After that I want to get two differt files: 1. A flash movie form my website and 2. A file form my archive. With those files I want to complile DVDs with DVD Studio Pro for my customers later. Can anyone please give me a good and professional workflow to solve this common problem? Thanks a lot.

What progrograms do I have to use in order to get file out of the DVD-vobs, that Final Cut Pro can read an work with
MPEG Streamclip http://www.squared5.com/svideo/mpeg-streamclip-mac.html
-DH

DVD Studio Pro and Soundtrack Pro always ask for Serial

I use FCP X and sometimes Logic Pro X but the latter doesn't have nearly the capabilities for dialog editing that Soundtrack Pro did. Now that I'm on Yosemite (have no idea is that the problem) I can only open Soundtrack Pro or DVD Studio Pro by re-entering the serial number. I've seen this before with OS updates, but now it asks for me to re-enter serial every time I try to open them. Even if they were open a few minutes ago and I haven't restarted. Any ideas?

See this thread and see if it helps:
Final Cut Studio Keeps Asking For Serial Number
MtD

DVD Studio Pro 4 Dual Layer Disc Question - Can Files Be Moved from Top to Bottom Layer?

HI Everyone -
I have authored a dual layer DVD for a feature film with lots of bonus material. I put the layer break in the least intrusive spot where the frame is already still and there is little sound. Layer switch is fine. DVD plays as it should with no problems other than the expected pause during the layer break.
I'd like to have the layer break at a point much earlier in the movie, where it actually goes to black and silence for a moment - a spot DVDSP4 won't let me assign a layer break marker to. I do understand why.
DVD Studio Pro has the movie on the bottom layer of the DVD, I assume because that is the first track I created.
At this point, is it at all possible to move the tracks around where the bonus features take up most of the bottom layer so the less of the movie is on the bottom layer and I can move that layer break up (without completely re-authoring)?
Thank you for your time.
Joe Grisaffi
Houston TX

The fun continues...
The DVD Drive on my 10.6 machine seems to no longer be working...
Maybe this caused/contributed to/resulted in the earlier problem?
Anyone else experiencing similar issues? All hard drives and firewire drives seem to be functioning normally at this time.
My 10.5 machine appears to be eating through the DVD writing process successfully... slowly, but successfully

Studio Pro 2 and DVD+R Discs

Similar Messages

Maybe you are looking for