Studio Pro 3 will not launch

I just installed it on my new MacBook Pro 2.4 and it will not launch. Worked fine on my 2.33 MacBool Pro that was stolen. Any ideas?

I'm surprised that you actually got it to work on the previous MacBook. DVDSP3 is not built to run on an Intel processor. Unfortunately, I'd suggest upgrading to DVDSP4 Universal Binary, or even going all the way to FCS2. You may get it to work, but since it isn't in the specs, Apple won't help you support it.

Similar Messages

Acrobat X Pro | Will not launch

Moved to a new laptop.
Deactivated Acrobat X Pro on old laptop
Reinstalled Acrobat X Pro (with Sr # - not trial version)
Installs OK. PDF Printer installed and works.
But Acrobat will not launch, after the initial 'splash' screen.
No error messages.
Same with Distiller.
PDF documents open with Reader only
Windows 7 - 64 bit - Same as on old laptop. Worked perfectly well on old laptop.

Update:
Had a support ticket set up and got a call back pretty quick from the Adobe Support Team.
Unintalled Reader X - to avoid possible conflict with X Pro.
Deleted cache and pcd files from CommonFiles/Adobe PCD
Logged out of domain user profile
Logged in as a local user
Acrobat lauched, connected with Adobe, and worked ok.
Logged out as local user and logged in again as normal user.
Acrobat X Pro lauched and works fine.
Thank you for the quick resolution.

Quick Time Pro will not launch

10/04/10: I downloaded Quick Time 7 and purchased a key for Pro. I can open video files with QT7Pro but I cannot launch Quick Time from either the short cut that was created or from the All Programs. The only thing that happens is that the Apple Quick Time logo and name appear in the bottom of the screen as though the program was shrunk down. It will not launch. Right clicking on the icon only provides the capability to "move" "minimuze" or "close." Maximize is grayed out and so is "restore."
I'd like to use the software I purchased to edit my videos and use some of the other features of Quick Time Pro.
What could be the issue? HELP.
Bill N. in Sarasota, Florida

That sounds a bit like a blown-out QuickTime preference file, Bill.
First we'll try rebuilding the QuickTime.qtp file, to see if that helps with the launch.
Quit QuickTime if the button is currently showing in your Taskbar.
We'll now have to set you up to view hidden files and folders.
(1) Quit Safari if you have it open
(2) Go Start > Open.
(3) In the Organize menu, click Folder and Search Options.
(4) Click the View tab.
(5) Make sure that Show hidden files and folders is selected.
(6) Click OK.
Now look for a QuickTime folder in one of the following two locations (where "UserAccountName" is the name of the user account in which QuickTime isn't launching correctly):
C:\Users\UserAccountName\AppData\Local\Apple Computer\QuickTime\
... or:
C:\Users\UserAccountName\AppData\LocalLow\Apple Computer\QuickTime\
Drag the entire QuickTime folder out onto your Desktop.
Now launch the QuickTime Player again. (This should rebuild the folder and contained preference files.)
Does the Player launch properly this time? Or do you still get the same trouble?

DVD studio pro will not burn menus PLEASE HELP!!!!!!!!!!!!!!

PLEASE HELP!!!
I have created a project, a DVD with menus and subtitles in 2 languages, yet when I burn the DVD (both using build/format option and build format options separately)the resulting DVD has no main menu, actually it has no menus at all! it goes straight into the DVD film where I can change subtitles language only from the remote buttons. The project compiles successfully but once formatting it gives me two hilghlighted errors in the log (which I gather are the layouts/menus)HERE IS THE LOG (highlighted part is error message):
Building Project Treesitting DVD with sub+menu
17/12/2007 14:12:01
Build Folder /Users/adelitahusni-bey/Library/Caches/DVD Studio Pro Files/HVDVDTS/HVDVDTS/nomad/treesit dvd
Starting DVD Build TREESITTINGDVD_WITHSUB...
Compiler Initializing...
Precompiling Project TREESITTINGDVD_WITHSUB
Compiling VMG Information...
Created 15 PGCs in VTSM1
Created 8 PGCs in VMG.
2 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Skipped Rendering Menu:Menu 1,Language:1.
Compiling Menu#2 (Menu 2)...
Skipped Rendering Menu:Menu 2,Language:1.
Writing HV000M02.EVO
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Preparing Subtitles...
Muxing HV001T01.EVO
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
+*Warning: The file ‘TREESITTINGDVD_WITHSUB.layout’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
+*Warning: The file ‘VOB_DATA.LAY’ found in the VIDEO_TS or HVDVD_TS folder will not be included in the final disc.*+
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 1
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing UDF 2.50 structures
Writing files
Writing final UDF information
Formatting finished.
Formatting finished.
DOES ANYONE PLEASE KNOW THE REASON FOR THIS???? AND HOW TO SOLVE IT???? PLEASE PLEASE PLEASE...HAVE TO SEND THIS PROJECT OFF SOON.
I have burned another project with menus succesfully..

Hi
FIRST check that your Play Movie button in your menu has NOT an Auto Action selected that make it plays automatically your movie when the Menu loads. You'll find that setting in the Advanced tab of Inspector. If not . . .
You can try a workaround, no matter that if you have your Menu as First Play it must work. Try yhis:
- Create a simple black JPG file i.e. in Photoshop
- Create a Slideshow
- Add a the JPG to the slideshow, set duration 2 secs
- Set the Slideshow as First Play
- Set Slideshow End Jump to your Main Menu
Build and burn again.
Alberto

DVD Studio Pro will not burn DVD in Lacie D2 External DVD Burner

I ordered a new pack of DVD's. These are the Beall 16x DVD's I bought from Meritline.com. I had been using the 8x Beall's with no problem. I was told that my interal drive was not compatable with the faster burning DVDs. So I bought a LaCie D2 External DVD burner 16x. I still can't burn a dvd in dvd studio pro. I tried Patchburn. It said that this burner is already supported.
I am using DVD Studio Pro 2.
Any ideas?

Have you tried burning on other types of brands when burning to your external LaCie? My company bought a NEC external DL burner and it only worked with some type of discs, Maxell DVD+R DL worked but Traxdata DVD+R DL and some other Noname disc didnt work, maybe try that?

DVD Studio Pro will not recogise my chapter markers!!!

When I export my Quicktime movie from Final cut, I include the DVD Studio Pro markers.
However, when it gets into DVD Studio Pro, it does not recognise them at all.
I tried in vain to go back to Final Cut Pro and export the markers "as a text file" but could not find anywhere to do that. I looked at XML exporting but that did not work either!
How can you get Final Cut Pro to just export chapter markers.
Help!

You might also try right-clicking on the mpeg in the track in DVDSP and choosing "add embedded markers". I think I remember noticing that markers did not necessarily import automatically when adding an mpeg to a track, if there were any markers already in that track (with the exception of the un-deletable first one).
There is also an option in the Compressor preset, in the Encoder pane of the Inspector, under Extras, where the inclusion of markers can be checked on or off. If you are exporting to a Quicktime movie before importing to Compressor, you should be able to see the markers in the preview window by choosing to show them from the markers dropdown to the right of the Compressor preview window's scrubber bar.
Hope this helps.
Max Average

Is it true that DVD Studio Pro will not burn HD discs?

I an considering shooting in HD and editing that in Final Cut Express, but I have been told that DVD Studio Pro won't create a HD disc without a very expensive addition of something called Blue-Ray. Are there any advantages of shooting in HD, if the final disc won't support it? Would the aspect ratio be 16:9, but with no better definition?
Thanks, Bob

You're better off putting it into Compressor and using one of the DVD presets such as DVD Best Quality 90 mins. That will give you much better quality than DVD SP's built-in compressor.
SD stands for Standard Definition and refers to NTSC, PAL, SECAM, etc, depending on which country you are in.
In DVD SP you can change the aspect ratio settings so that it will display in 16:9 on a widescreen TV but letterboxed on a 4:3 screen.

DVD Studio Pro will not load videos

Hello,
Ever since I upgraded the latest Quicktime Update I cannot load video assets into DVD Studio Pro. The program keeps locking up.
I have deleted my DVD Studio Pro preferences several times with no success.
Any Ideas?
Thanks,
Mike Kommersmith

When you try to load video assets from the palette, the spinning ball just comes up. I didnt leave it that long before force quiting. But the poster left if for an hour.
I'm using final cut studio. But it all happened on my imac and macbook pro right after the quicktime upgrade.
I did find a work around, which I posted above. Instead of importing thru the palette, just import by clicking file / import/ asset. But the heck would cause the palette to lock up like that? When you force quit dvd studio it says "not responding" next to the program name. I've tried all different video files on my desktop, one at a time. But I dont think the program even gets that far, it just locks up as soon as you hit the palette area of the screen.
I can import audio, stills ,etc without a problem.
I'm just amazed that noone else ran into this problem yet.

DVD Studio Pro 3 not launching

Working fine last night, however, this morning the application won’t launch. The log files are as follows:
## Component Manager: attempting to find symbols in a component alias of type (regR/carP/x!bt)
## Component Manager: attempting to find symbols in a component alias of type (regR/carP/x!bt)
## Component Manager: attempting to find symbols in a component alias of type (regR/carP/x!bt)
* malloczonemalloc[537]: argument too large: 3638034432
Anyone know what is going on / how to get program to start?
Many thanks.

Update. Wow, how to write this one up? Here is the procedure that I went through in order to solve this issue – I only hope it can assist others.
First, I tried all standard issue resolution steps offered here and from Apple: dumped preferences files, repaired permissions, etc. Issue not resolved. Decided to re-install application. Followed Apple protocol for application deletion then re-installed. Issue not resolved. Again, deleted DVDSP following steps then re-installed DVDSP 2, which would launch, this made me hopeful, went on to install 3. 3 would not launch. ****. Then, on a hunch, I decided to look into the last time the program ran successfully, which was yesterday. The reason I had this hunch was due to the last line in the error code that was given when I would attempt to launch the program.
“* malloczonemalloc[503]: argument too large: 3638034432”
Not knowing what this meant, I went to Google. Nothing real specific to my issue there, although, from my research, I got the impression that this had something to do with a program trying to access a file that was too large. Hmmmm… hunch time.
Last successful shutdown of program was at 7:43 PM. I did a search of files created around this time and there it was, the only DVDSP associated file created close to this time. It was a custom shape that was imported from photoshop at 7:31 PM and used in a DVD that I was working on. Checking to see if it was corrupt I opened it, it opened fine in photoshop, ****. Thinking there had to be something there, I did a search for the file name. Two files found, one where the time search had found it, and one in the library/appsupport/DVDSP/shapes folder. The file in this folder was created at 7:43 PM, the exact time of the last successful shutdown of the program, however, it was not found when I searched by creation date, as the original file was. The file size of this file was 0KB. Ah HA! Maybe, just maybe. I deleted this file and attempted to re-launch DVDSP…
SUCCESS!!!!!
Hot ****! Sorry for the long narrative but I’m just so happy I could crap myself. I guess this file that was a custom shape created in photoshop and imported into DVDSP, successfully I might add, as I programmed the button and everything, but when I closed the program, DVDSP apparently tried to re-copy the file into its own directory and corrupted the file. Once deleted, all works as should, WOW. What a pain in the ***!
I only hope this comes to be helpful to some poor soul who has a crashing application that maybe recently imported a custom shape or otherwise.
Out.

Logic Pro will not launch

Hello everyone. I just tried launching my Logic Pro application and a window popped up that said:
This version of Logic Pro requires Pro Application Support 4.0 (687.0) or newer.
ProKit: 589.0
I'm currently using Logic Pro 8.0.2 I've tried updating and now I'm wondering if I should just uninstall and reinstall? If so, I'm wondering how to approach the task? Thanks for the input take care.
Erv

Erv 1 wrote:
Hey I accidentally installed the wrong ProKit update which was 5.0. I was wondering if anyone had any advice to help me trash that update and update the proper ProKit update which on my operating system would be 4.5?
If it works leave it as it is...
One other thing that is interesting, is that I launch Soundtrack Pro not sure if you guys use it or not but all the loops and samples are highlighted red not sure what that would mean in FCP it means that the files are off line but as far as Soundtrack not sure what it means and what to do to fix it. Thanks
Have you moved the files from their original location?or deleted /replaced something?
A
Message was edited by: immo

My final cut pro will not launch, I keep getting Final Cut Pro quit unexpectedly

I've done everything to deleting preferences and plug ins to re installing it, someone please help me with this problem

No luck at all, ive done everything thinkable and this is what i get in my report
Process:         Final Cut Pro [284]
Path:            /Users/ConGar/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Identifier:      com.apple.FinalCutPro
Version:         ??? (???)
Build Info:      FCPApp-906181654~22
Code Type:       X86 (Native)
Parent Process: launchd [78]
Interval Since Last Report:          53967 sec
Crashes Since Last Report:           20
Per-App Interval Since Last Report: 0 sec
Per-App Crashes Since Last Report:   20
Date/Time:       2011-06-22 12:40:21.298 -0400
OS Version:      Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: FB70EBC0-C946-4694-AE72-9D861D7E5486
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/SharedA/Frameworks/ProFX.framework/Versions/A/ProFX
Referenced from: /Users/ConGar/Desktop/Final Cut Pro.app/Contents/MacOS/Final Cut Pro
Reason: image not found

Final Cut Pro Will NOT Launch

Everything was fine yesterday. Now it quits after the FCP launch screen. It goes through loading all the plugins, then when the graphic disappears, the program quits and you're back at the finder.
Any suggestions on how to remedy this? I'm using version 5.

Have you tried the Sudo Shuffle (although I believe this is usually a solution when FCP isn't even getting as far as the plug-ins.)
1. Save any files or work you may have open, because you'll need to restart the computer after these steps.
2. Open Terminal (found at /Applications/Utilities/).
3a. In 10.3.9 or earlier Type: sudo update_prebinding -root / -force
3b. In 10.4.0 and later sudo update_prebinding -root / -force -debug
4. Press Return.
5. Enter your password when prompted.
6. The prebinding operation may take a few minutes. When it is complete, a new command-line prompt will appear. When this happens, please quit Terminal and restart your computer.
(Don't forget to Restart.)

HT1338 after upgrading to OS Mountain Lion my DVD studio pro will not compile. There doesn't seem to be any software update for DVDSP4.

after I upgraded to mounatin lion I tried to make a dvd with DVSP4 All goes well importing, connection chapters etc. Looks fine in simulate. When I try to make the DVD the measseage says compiler failed.

I went back into DVD SP and clicked on build.
After the build I was able to burn a disk.

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from

CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?

Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html

I receive an error message after installing Acrobat Pro. The software will not launch.

I've attempted to install Acrobat Pro on two computers and the software will not launch.

Hi mlhenry,
I've moved your discussion to the Acrobat Installation & Update Issues forum, so the experts who visit this forum regularly can chime in.
Best,
Sara

Studio Pro 3 will not launch

Similar Messages

Maybe you are looking for