"Studio" replace "Administration Services Console"?

Is "Essbase Studio" to replace "Administration Services Console"?

In talking with the product Managers, the long term goal is for Sudio to replace EAS and EIS. I think it will be a long whils untill all the necessary functionality is there for us to be able to do that. People are very resistant to change, I know some people that still use App Manager and that has not been around since the Version 6 productts.

Similar Messages

Re: Installation of client Essbase Administration Services Console 11.1.2

Hi,
I am going through the same issue.
I've installed and configured Hyperion 11.1.2.3 on my XP machine(XP Service Pack3 32-bit) which has Oracle 11G installed on it..
I'm able to open Shared Services URL and am able to open Workspace URL but I don't see Administrative Services Console in Essbase from Start >> All Programs.
I've checked for the console folder in <MIDDLEWARE_HOME>\EPMSystem11R1\products\Essbase\eas\console\bin. but I don't see a console folder.
I even searched for the file, admincon.bat and din't find that either.
Can any one help me to bring up the Administration Services Console back.
And I also see that Import Data from Earlier Release is failed while configuration is done. Did that has got something to do with?
Kindly help.
Thanks,
Raj

You may have to install and configure Essbase server to use it.
I think it doesn't support XP.
You can look at the support matrix for supported platforms and get essbase server installed to continue working on it. Have a look at the link Supported Platforms Matrices - Oracle Enterprise Performance Management System to get you started.
At minimum, you need to have windows server 2003 for essbase server
Regards
Amarnath
ORACLE | Essbase

Can't create new users in Administration Services Console

Hi,
I am following directions in the Essbase DBA guide for creating new users, as it says you must create a partition user to work with Samppart and Sampeast applications. It tells me to log on to Administration Services Console, go to the Administration Server, and right-click on users to create a new user. However, when I right-click, the option to Create New User is light grey and not clickable, neither is the option to refresh users. Can anyone tell me why I can't create a new user? I am logged in with the username: admin password: password that I set during configuration and that should be the Administrative account.

Hi,
What version are you using? If it is 9 then you need to create the user in shared services. I just checked and the option to create a user is greyed out for me too and I am an admin.
It sounds like you haven't externalised the users which is why the option to do a refresh is not there.
Thanks,
Nathan

Essbase Administration Services Console (EAS) using a Web browser

Hi,
We have installed Essbase 11.1.1.3 sucessfully.
we are logging into Essbase Administration Services Console (EAS) using a Web browser, i.e. Internet Explorer. Select the language and i am able to login sucessfully however i am not able to see anything when i expand Essbase server.
I have checked my Java version by going to to Start->Settings->Control Panel->Java. On the Java tab, confirm the Runtime Settings and it is Java JRE 1.6.0_22
I am able to see all my applications and databases when i went into the EAS server and logged in by going to Start-All Programs -EPM System -Essbase -Start Administartion services console.
Can anyone kindly let me know what is the issue why i am not able to see anything when i login to console using a Web browser.
Regards,
AS

Hi,
Thanks for the Reply... i have added my server correctly. when i expand my server name.. i am not able to see anything.. ideally i should see applications there.. i am not able to see those.
Regards,
AS

Essbase Administration Services Console Login Error.

Hi All,
I am new to Hyperion and Essbase. I have been working in OBIEE for sometime. Few days back I have installed most of the available products in Oracle EPM 11.1.1 in my XP machine with Oracle10g. It looks like all the configuration went good - green marks in EPM System Configuration utility, and I am able to login Shared Services using "hypuser/password".
But when I try to login Essbase Administration Services Console using the following
Server: "MyMachineName",
User: "WindowsUser" &
Pwd: "WindowsPwd"
I am getting an error "Could not Connect to Administration Server machinename".
Could anyone help me in solving this issue.
Do I need to make any change in any parameter files or any other settings need to be done before string exploring the application.
Also, I am struggling to find the starting point to learn Hyperion related products could you please shed some light on it. I have read few documents provided by Oracle but still I couldn't make much progress.
Thanks
Yar.

Thanks for the reply.
I am using Tomcat included in the package. I am not using 10gApps.
I have installed EPM system in another machine, but to my surprise I GOT THE SAME ISSUE. I used Tomcat which is included in the package. I don't know where it went wrong altough I followed the procedures in the installation and configuration guide.
One more thing is I am able to open Integration Services and connect to my Oracle SH schema through ODBC adn able to ready for creating OLAP Cubes.
When examining the log file ESSBASE.log I noticed an error message
Single Sign On function call css_init failed with error CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>
So, I believe there may be some configuration settings missing but not sure.
Hope these are added info.
Thanks
Yar
Edited by: Yar on Aug 28, 2008 11:35 AM
Edited by: Yar on Aug 28, 2008 11:36 AM

Starting EAS is very slow -Web Launcher for Administration Services Console

Hi all,
When a user has not been connected to EAS for more or less amount of time
starting the EAS via (Web Launcher for Administration Services Console) takes a very long time.
When ESA is started also opening the “Essbase Server” node and then also opening the “Application” node takes a long time.
This a very annoying.
Is there any chance to accelerate this?
Any hint is welcome.
Thank you in advance!
Andre

Hi,
Oh sorry, I forgot to mention: Version 11.1.2.1 in a distributed environment Win2008R3 64bit.
From one of the servers I also used EAS with the same outcome - well seems the Service behind is the same one.
And as I wrote this is not always case. for example just this morning it was fast as I expected it to be.
However there must be a reason for the occasional slowliness and customers usually has less understanding for suche an up and down of performance.
Any idea?
Thank you in advance!
Andre

Installation of client Essbase Administration Services Console 11.1.2

My EAS console opens and connects successfully, but I am unable to right-click outline members or expand the outline by clicking on dimension names.
I tried to install the client tier of Oracle EPM 11.1.2 including EAS console, EPMA, and Reports on my laptop. I'm running 32-bit Windows 7. After a few failures, I thought I successfully installed these products by:
1) first installing the Microsoft Loopback Adapter (not sure this was necessary),
2) running the install "as Administrator", and
3) copying this folder from a colleague's installation: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Console\workspace. The last folder was probably not created in the installation for some reason. I only realized that this folder was missing when I found this error log when trying to login Essbase Studio -
!STACK 1
java.lang.IllegalStateException: The platform metadata area could not be written: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Console\workspace\.metadata. By default the platform writes its content
under the current working directory when the platform is launched. Use the -data parameter to
specify a different content area for the platform.
etc.
After all this, I can successfully login to Essbase Studio, however, my EAS console still does not work properly. I realize I can use the web console, but I think this is an installation problem that will cause problems later with other products.
Does anyone have any ideas?

I've experienced similiar problems in multiple environments. Even the outline for Sample.Basic was locked. I just stumbled across something that corrected the problem (at least for now :) ). I opened one of my outlines, selected the "*Account*" dimension and then chose to "*sort the children of the selected member in descending order*" (menu option directly above database outline) and somehow that unlocked my outline. Not sure why that solved the problem, but it did.

Cannot connect essbase sever using Essbase administration service console

Hi:
I installed Essbase 11.1.2.2 in my PC,
but I cannot connect essbase server with the administration servise console. but I try to connect with ESSCMD.exe, everything is OK.
could you pls help to advise how can I connect it ?

Did you add the essbase server in EAS?
If yes what is the message that you are getting while connecting to Essbase?
Regards
Celvin
http://www.orahyplabs.com
Please mark the answers as helpful/correct if applicable

Essbase Data Mining from Essbase Administration Service Console

Hi there ,
Have anyone had tried essbase data mining feature that can be use from EAS ? I tried to learn from dbag but seems we need more comprehensive step-by-step guidance on how to implement such feature..
Thanks

Can you try providing the port number together with the server name?
If you are using the embedded http server then it is FAIRY:9000.
The port number can vary (depending upon the selection you made)
Also check Hy9eas.log under diagnostics/services folder and see any error message is there in that.
Regards
Celvin
http://www.orahyplabs.com
Please mark the answers as helpful/correct if applicable

Essbase Administration Services: Cant connect to Administration Server

Cant connet to Administration Server via EAS console. I would appreciate any hints that might help me overcome this next unknown.
Background follows:
I installed EPMA 11.1.2.2, and then went to the workspace wondering where the sample data was (after I created a sample app). I discovered in docs and forumns that I had to load it through the Essbase Administration Services console. Now I'm trying to get that to work. I installed it after posts revealed that it is part of the client installers (thanks John) package. Now that it is installed I run it, try to login, and get an error message that says "could not connect to Administration Server." I reinstalled the EAS database as a new install to my server.mydomainb.org:1433 via the configurator. Then I redployed all the apps to the app server. And lastly started all of the services. Still I get the same message. I've done this about 4 times hoping that a reconfig will somehow fix something but still no joy. I've also tried loggin in with different names for the server such as myserver:1433 or myserver.mydomain.org:1433 or myserver and none of those helped either.
I have manually started all the services so they appear to be working. I may be missing one but I wouldn't know.
The services that are running include:
Hyperion EPM Server - Web Application
Hyperion EPMA Server
Hyperion Financial Data Quality Management
Hyperion Integration Services
Hyperion Reporting and Analysis Framework
Hyperion Studion Services BPMS bpms1
Some in posts have suggested also going to the logs. 11.1.2.2 docs say that the EAS logs are located at oracle_home\user_projects\domains\epmsystem\servers\EssAdm..Services0\logs\easserver.log. But I found mine at:
<oracle_home>\user_projects\domains\epmsystem1\servers\logs. You will notice that my empsystem is empsystem1 instead. There I found that the easserver.log file is empty but I did find one error in the file EPMServer0.log. The error I found is as follows:
####<Apr 4, 2013 11:42:09 AM MDT> <Error> <JDBC> <SLCBRASSTEST> <EPMServer0> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1365097329966> <BEA-001112> <Test "select count(*) from SERVERLOGID" set up for pool "eas_datasource" failed with exception: "java.sql.SQLSyntaxErrorException: [FMWGEN][SQLServer JDBC Driver][SQLServer]Invalid object name 'SERVERLOGID'.".>
I'm not sure what to try next so any suggestions would be helpful. Thanks!

"Hyperion EPM Server - Web Application" indicates that the web apps have been deployed to a single managed server, this means the web apps will be running a default port of 9000, the EAS console is not aware of the port so you will need to include it when you add the server in the console e.g. servername:9000
Cheers
John
http://john-goodwin.blogspot.com/

Accessing Essbase Admin Services Console in Red Hat Linux 4.0

Hi,
I would like to start Essbase Administration Services Console in Red Hat Linux 4.0
Kindly describe the steps.
-Jitendra

Hi,
You will have to use the web client, if EAS application server is running you can go to http://<easmachine>:10080/easconsole/console.html
Cheers
John
http://john-goodwin.blogspot.com/

Is there way 2 give users VIEW only in Adm Services Console(essbase)?

Hi,
Currently we have ADMIN user logging into "Administration Services Console" (essbase) and we would like to give access to a super user access to this as well so he can view the calcs. Is there a way to give that person VIEW only access?
jang

galen2 wrote:
am i missing something obvious, or is this not available in audition ?
No, that view (that I've always found rather annoying, myself) isn't available. But zooming in and out in Edit View is easily and rapidly achieved by more than one method, and once you've got used to it you'll not particularly want to go back, I suspect. Audition isn't a clone of Wavelab, and Adobe deliberately don't implement features in the same way as in other software unless there is absolutely no choice in the matter - which is rare.
Incidentally, most people in your situations find replies like this quite annoying. Please don't take it personally - that's just the way it is with software; you get used to the way it works, or if you don't like it then get something else that does it for you. There is no universal paradigm for how an audio editor 'ought to' work, and neither should there be. But in this regard, I have to say that an awful lot of editors all over the world having to work fast in radio stations use Audition as the tool of choice - simply because editing on it is extremely intuitive and quick, without resorting to confusing multi-screen views.

Failed cfg on Essbase /Essbase administration service and Essbase / Studio

Hi Friends,
I Installed Oracle Hyperion Foundaion services,esbase and planning.
i deployed essbase in standalone mode.
when i run EPM system Diagnostic I am geting failes status on
Essbase /Essbase administration service and Essbase / Studio with the Test Description
FAILED CFG: Configuration Check whether all configuration tasks have been completed
Error: Next tasks are not configured:
hubRegistration: Configuration Failed
Recommended Action: Try to configure mentioned tasks
is there any problem because of this?please suggest
Regards
DB

Hi,
Have you configured Essbase, Shared services and Planning component after installation; were it successful last time.
Thanks
Focusthread Hyperion Trainer
[http://focusthread.com/training]

Shared Services Console - User is not authorized for the action

Hi,
I have installed Essbase 11.11.3 and configured on Linux. I started EPM and then the Shared Services Console. I created a new group Poweruser and assigned a new user to it. I provisioned the group withall the rights of the admin. This all works.
When I log on with the new user on the Shared Service Console and go to Essbase Studio Server and click on the Essbase Studio Server application it gives me the message:
User is not authorized for the action
This is the same message as I get under the user admin. Can anyone tell me what I can possibly do to make it work.
The service for EAS is started properly. The one thing that is not configured is HBR.
Patrick

Hi,
What are you trying to achieve, provision a user for essbase studio ?
EAS is a separate product from Studio.
Cheers
John
http://john-goodwin.blogspot.com/

The visual Studio Test controller service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs

We are using VS2013 Premium. i have installed vs2013 Test controller in my dev environment. While i am configuring (https://msdn.microsoft.com/en-us/library/hh546459.aspx) getting error message in
the Configuration summary dialog box displaying following error's : 1. Failed to Configure TFS Team Project Collection, 2. Could not complete operation as the time out expired. ''
I have checked the "visual Studio Test controller " in the
Services --> Administrative. Its automatically stopped the service. When i started the manually its showing message like as 'The visual Studio Test controller
service on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs'
Please guide me how to resolve this problem.
Thanks in Advance...

Hi Divakar,
What’s the version of your TFS?
How do you configure the test control?
Please make sure you are specify the team collection instead of team project.
On the other hand, you may enable test controller logs. (You could share the log file on the OneDrive)
# How to enable test controller logs
http://blogs.msdn.com/b/aseemb/archive/2009/11/28/how-to-enable-test-controller-logs.aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Studio" replace "Administration Services Console"?

Similar Messages

Maybe you are looking for