Studio vs Integration services

Hello All,
Can you plz tell me what is the difference between Essbase Studio and Essbase Integration services?
If i have Essbase studio installed,do i really need to install Integration services?
Thanks,
Dipika

To add to Sandeep's comments, it's my understanding that Studio is the future, and EIS is most definitely the past. What I mean by that is that Oracle essentially made no improvements to EIS with 11x, and is not going to do so in the future.
EAS is in the same position -- still supported, but not enhanced.
Studio is the way forward.
It really is way cool, and really reflects Oracle's drive to push Essbase to the next level.
Regards,
Cameron Lackpour

Similar Messages

Management Studio Fails when added Integration Services step to SQL Server Agent Job

Hi,
I have two new servers I've setup with Windows Server 2012, SQL Server 2012 SP1, Visual Studio 2012 SP4. I've previously been on SQL 2008 and VS 2008 so this is new to me.
I am finding SSMS is throwing an exception on both machines when i do the following:
1. Go to SQL Server Agent | Jobs
2. Create a new Job.
3. Select Steps and click New Step
4. Change the job type to SQL Server Integration Services Package.
Following error occurs:
TITLE: Microsoft SQL Server Management Studio
The type initializer for '<Module>' threw an exception. (SqlManagerUI)
ADDITIONAL INFORMATION:
The C++ module failed to load.
(DTEParseMgd)
Index was outside the bounds of the array. (DTEParseMgd)
I also find if I take an existing job with SSIS package steps and attempt to edit those steps the same message appears. This issue happens on both my servers as they have been configured almost identically. This doesn't occur when selecting any other job
type.
I've also tried installing cumulative update 8 in a hope that this may fix it but with no success.
As my entire environment is based around SQL Agents running SSIS i'm a little bit concerned, especially since I have some tight deadlines getting these servers running.
I have found nothing relating to this issue. Any help greatly appreciated.
Simon
Below is the detailed error message:
===================================
The type initializer for '<Module>' threw an exception. (SqlManagerUI)
Program Location:
   at Microsoft.SqlServer.Management.SqlManagerUI.DTSJobSubSystemDefinition.Microsoft.SqlServer.Management.SqlManagerUI.IJobStepPropertiesControl.Load(JobStepData data)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.UpdateJobStep()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.typeList_SelectedIndexChanged(Object sender, EventArgs e)
   at System.Windows.Forms.ComboBox.OnSelectedIndexChanged(EventArgs e)
   at System.Windows.Forms.ComboBox.set_SelectedIndex(Int32 value)
   at System.Windows.Forms.ComboBox.set_SelectedItem(Object value)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.InitializeStepCombo()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.InitializeData()
   at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.OnInitialization()
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.SetView(Int32 index, TreeNode node)
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.SelectCurrentNode()
   at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.InitializeUI(ViewSwitcherTreeView treeView, ISqlControlCollection viewsHolder, Panel rightPane)
   at Microsoft.SqlServer.Management.SqlMgmt.LaunchForm.InitializeForm(XmlDocument doc, IServiceProvider provider, ISqlControlCollection control)
   at Microsoft.SqlServer.Management.SqlMgmt.LaunchForm..ctor(ISqlControlCollection control, IServiceProvider provider)
   at Microsoft.SqlServer.Management.SqlManagerUI.JobSteps.editJobStep_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
   at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
   at System.Windows.Forms.Application.RunDialog(Form form)
   at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
   at System.Windows.Forms.Form.ShowDialog()
   at Microsoft.SqlServer.Management.SqlMgmt.RunningFormsTable.RunningFormsTableImpl.ThreadStarter.StartThread()
===================================
The C++ module failed to load.
(DTEParseMgd)
Program Location:
   at <CrtImplementationDetails>.LanguageSupport.Initialize(LanguageSupport* )
   at .cctor()
===================================
Index was outside the bounds of the array. (DTEParseMgd)
Program Location:
   at _getFiberPtrId()

Hi,
I hadn't installed CU3 however as a test i tried installing CU4 and this didn't help. Since my first emails i have more issues that have brought a complete hault to the upgrade project.
If i double click on a package to run it manually I basically get the same issue. This means i have no way of running any packages except throught VS.
I've also found that regardless of the order of the software installs it still fails. It's related to SP1 of SQL and SP4 of VS.
I'm on Server 2012. When install in the following order SQL 2012, SQL SP1, VS2012, BIDS, VS SP4 i have no problem until VS SP4 is installed. If i install VS SP4 then BIDS it also fails at the last step. If i install all the VS and BIDS software first, then
SQL then SQL SP1 it fails at the SQL SP1 step.
This means i could actually install everything and either ignore the SQL SP1 or the VS SP4 and i'd be fine however this is not really a solution as i will never be able to patch the software and once live this is very dangerous.
I am still surprised there is no obvious solution to this. I'm only installing MS software on a fresh box and only installing 5 pieces of software (including the SPs). I would have though if this was an issue others would have come across it too.
Has anyone else installed all these components and got them working on the same OS. I believe early on in my testing i installed these in Windows Server 2008 and didn't have the issue.
Regards.
Simon.

SQL Server 2012 with Visual Studio 2013 with SSIS/Integration services project?

I wanted to build an integration services project to import data from multiple sources using a vendor's API.
I wish I could recall how I got to the point where I was able to build one and have it run successfully, but I had to install so many things that I honestly don't remember.
However, I noticed my PC booting really slowly after that, and I saw that I had components of VS 2010, VS 2012 and VS 2013 installed, along with SQL Server 2008 and 2012. So I uninstalled a bunch of stuff, hoping to get to where I had only the most
current versions of all, that were compatible with my corporate environment. So I was aiming for Visual Studio 2013 (Premium, I think) and SQL Server 2012.
Took me 2 days. Now I'm at the point where I think - and I'm here to learn if I'm correct - that I cannot get an oData Source component into my project and use VS 2013 IF I want to stick with Sql Server 2012. Is that correct?
I get very confused when trying to determine how the acronyms relate: SSIS, SSDT, SSDT-BI, etc.

Hi Anonymous11847,
SSDT: Microsoft SQL Server Data Tools for Visual Studio 2010, it contains Business Intelligence project templates for Analysis Services, Integration Services, and Reporting Services that support Visual Studio 2010. This can be installed when SQL Server is
installed. It supports various SQL Server versions as follows:
SSAS projects can target SQL Server 2012 or lower
SSRS projects can target SQL Server 2012 or lower
SSIS projects can target only SQL Server 2012
SSDT-BI for VS 2012: Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2012, it contains Business Intelligence project templates for Analysis Services, Integration Services, and Reporting Services that support Visual Studio 2012.
This needs to be separately downloaded and installed. It supports various SQL Server versions as follows:
SSAS projects can target SQL Server 2012 or lower
SSRS projects can target SQL Server 2012 or lower
SSIS projects can target only SQL Server 2012
SSDT-BI for VS 2013: Microsoft SQL Server Data Tools - Business Intelligence for Visual Studio 2013, it contains Business Intelligence project templates for Analysis Services, Integration Services, and Reporting Services that support Visual Studio 2013.
This needs to be separately downloaded and installed. It supports various SQL Server versions as follows:
SSAS projects can target SQL Server 2014 or lower
SSRS projects can target SQL Server 2014 or lower
SSIS projects can target only SQL Server 2014
So if the SQL Server version is SQL Server 2012, we should install SSDT or SSDT-BI for VS2012 to create SSIS project.
Reference:
Microsoft SQL Server Data Tools Update
If there are any other questions, please feel free to ask.
Thanks,
Kathrine Xiong
Katherine Xiong
TechNet Community Support

How can I retrieve an existing .dtsx File out on Integration Services Catalog

I have a problem with an older SSIS Package and I am trying to decipher what exactly it does. I see the Package in Microsoft SQL Server Management Studio and in our Server and under
Integration Services Catalog. It has a .dtsx extension on it.
Is there any way that I can copy this Package, this .dtsx file, and open it Microsoft Visual Studio to see what exactly it does?
There doesn't seem to be anything available when I <Right-Click> on the .dtsx Package within Microsoft SQL Server Management Studio to Save As or anything similar. This is the first time I've ever had to look at something existing in the SSIS World.
I just don't know how to get it out and reference and view it is all.
Any help is greatly appreciated and Thanks in advance for your review.

Hi ITBobbyP,
Based on your description, you want to export a .dtsx package file from Integration Services Catalogs, then open it in SQL Server Data Tools.
Based on my test, we can create a project based on a project in Integration Services Catalogs, then we can look into the package in the project. For more details, please refer to the following steps:
Open SQL Server Data Tools, Click File, point to New, and click Project.
Expand Business Intelligence, and click Integration Services.
Select Integration Services Import Wizard in the middle pane, type a name for the solution, project, and specify the folder for the project, and then click OK.
In the Select Source page, select Integration Services Catalog option, specify the name of database server instance on which the catalog exists, and the path to the project in the catalog.
Click Next on the Select Source page to see the Review page.
Click Import to create a new Integration Services project based on the one you selected.
Double-click the desired package name to open the package in the project.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SSIS package not working on 2012 Integration Service Catalog deployment

I've set up a package that imports data from an excel spreadsheet(my only possible data source). I deployed it and it worked for a while and then broke. I had to switch to a generated connection string for excel with IMEX=1 to make things work.
Now it works fine on from Visual Studio on my local machine, but when I run it from Integration Services I get:
"The external column "<COLUMN NAME>" needs to be updated, for every column in the spreadsheet. I am using the same excel file on my local machine as on the other machine.
Why can't I get it to work when it's deployed to the SSIS Server?

Hi,
Excel files are a bit tricky to work with. Any small change in data type, metadata can make your package fail.
I have had such experience earlier. The file contents, columns everything was same but it used to fail with same metadata issue.
Here is what helped me:
1. I tried to clear all formatting using the excel formatting options and it worked for me. But we can't ask the users to do all these things manually before uploading files to the application.
2. So, I created a new excel file and created all column headers manually. Please make sure don't copy paste from any other excel file otherwise formatting and metadata will get changed.
3. Once you have the template ready. Configure your package Excel columns according to the template.
4. Now, If you copy and paste data into this plain formatting free file, data will adapt the template settings and won't give the metadata errors.
5. We uploaded the same template on our application and users created the data in same template which resolved the issue for us.
CSVs on the other hand don't have any such issues.
Hope this helps. Good Luck!

Unable to install Integration Services for SQL Server 2005

I'm not able to select "Integration Services Project" in Business Intelligence Development Studio (it is not in the templates below):
When installing, it says that it is already installed. Why can't I see it in the project templates?

Microsoft Visual Studio 2005
Version 8.0.50727.867 (vsvista.050727-8600)
Microsoft .NET Framework
Version 2.0.50727 SP2
Installed Edition: Professional
Microsoft Visual Basic 2005 77626-009-0000007-41773
Microsoft Visual Basic 2005
Microsoft Visual C# 2005 77626-009-0000007-41773
Microsoft Visual C# 2005
Microsoft Visual C++ 2005 77626-009-0000007-41773
Microsoft Visual C++ 2005
Microsoft Visual J# 2005 77626-009-0000007-41773
Microsoft Visual J# 2005
Microsoft Visual Studio 2005 Tools for Applications 77626-009-0000007-41773
Microsoft Visual Studio 2005 Tools for Applications
Microsoft Visual Web Developer 2005 77626-009-0000007-41773
Microsoft Visual Web Developer 2005
Microsoft Web Application Projects 2005 77626-009-0000007-41773
Microsoft Web Application Projects 2005
Version 8.0.50727.867
AnkhSVN - Subversion Support for Visual Studio 2.5.12440.9
AnkhSVN - Subversion Support for Visual Studio 2.5.12440.9
* Ankh.Package 2.5.12440.9
* Subversion 1.8.8 via SharpSvn 1.8008.3178.19
SharpSvn is linked to: Apr 1.5.0, Apr-util 1.5.3, Cyrus Sasl 2.1.25, eXpat 2.0.1, OpenSSL 1.0.1g 7 Apr 2014, serf 1.3.4, SQLite 3.7.17, Subversion 1.8.8-SharpSvn-1.8.8, ZLib 1.2.8
SharpSvn is optionally linked to: Berkeley DB 4.4.20, SharpPlink 1.8008.3178.19
Hotfix for Microsoft Visual Studio 2005 Professional Edition - ENU (KB2938803)
Microsoft Visual Studio 2005 Professional Edition - ENU Service Pack 1 (KB926601)
Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB2251481)
Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB2538218)
Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB2548826)
Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB971090)
Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB973673)
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.2047.00
Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB932232)

Access denied when connecting Integration Services service`

Hi ya, I'm using my own Windows user. Such user belong to Admin group. What's more, my Integration Services is started using this same user.
What's happening here?
Any advice or help would be very appreciated,
Version:
Microsoft SQL Server Management Studio
11.0.3153.0
TITLE: Connect to Server
Cannot connect to xxxxxx
Connecting to the Integration Services service on the computer "xxxxx" failed with the following error: "Acceso denegado."
By default, only administrators have access to the Integration Services service. On Windows Vista and later, the process must be running with administrative privileges in order to connect to the Integration Services service. See the help topic for information
on how to configure access to the service.
For help, click: http://go.microsoft.com/fwlink/?LinkId=220763
Connecting to the Integration Services service on the computer "xxxxx" failed with the following error: "Acceso denegado."
By default, only administrators have access to the Integration Services service. On Windows Vista and later, the process must be running with administrative privileges in order to connect to the Integration Services service. See the help topic for information
on how to configure access to the service.
BUTTONS:
OK
Enric

Close your SQL Server Management Studio (SSMS).
Open SSMS by right clicking Run as Administrator and then try to login to Integration Services.
If it doesn't work then double check if your account has admin rights on installed SQL Server.
Cheers,
Vaibhav Chaudhari

Integration Services Jobs failing

Hi SQL Community,
I'm new to SSIS, but I have inherited some Integration Services jobs that we depend on that are failing now.
I've attached an example error. Any suggestions or pointers would be appreciated!

Make sure the format of the XML and XSD files didn't change... else edit the package in SSDT/Visual Studio and check the Data Flow that has the XML source in it.
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Execute Package Utility Requires Integration Services

Hi,
I am trying to run an SSIS package from a client SQL Server Management Studio 2008 and am getting the message "The Execute Package Utility requires Integration Services to be installed by one of these editions of SQL Server 2008..."
I installed SP1 and CU6 on the PC and am still getting the message. Any ideas? Any help is appreciated.
Thanks

Hello,
I was getting same error message and This post helped me.
I got more info from below:
http://www.rad.pasfu.com/index.php?/archives/41-Minimum-Requirement-To-Execute-SSIS-Package.html
Minimum Requirement To Execute SSIS Package
A very common question is that :
what is minimal requirements for run a package?
Minimal Requirements to run SSIS package is :
DTEXEC which can be installed
with Integration Service at the SQL Server setup media. Note that you should Install Integration Services, because if you install DTEXEC without Integration Service then you will got this message when you try to execute a package from DTEXEC command line:
The SQL Server Execute Package Utility requires Integration Services to be installed by one of these editions of SQL Server 2008: Standard, Enterprise, Developer, or Evaluation. To Install Integration Services,
run SQL Server Setup and select Integration Services.
This is same operation on a machine who has Integration Service Installed:
Another option to execute SSIS package is with BIDS, you can select it during SQL Server setup steps.
So as a result you need to have one of these options to run a package on a machine: SSIS or BIDS.
Thanks Shiven:) If Answer is Helpful, Please Vote

VS2008 unable to load Integration Services package document after creation

Upon creating a new IS project in Visual Studio 2008, I get this error message in a tabbed window:
"Microsoft Visual Studio is unable to load this document: To design Integration Services packages in BI Development Studio, IS has to be installed by one of these editions of SQL Server 2008: Standard, Enterprise, Developer, or Evaluation. To install IS, run SQL Server setup and select Integration Services."
But I do have IS installed. I have two databases, one from the free Express Advanced edition and one from Developer edition. SQL 2008 setup (Developer edition) shows IS installed as a shared component. I installed the Express edition before later installing the Developer edition and had no problems. What needs to be done here? Help, and thanks for any help!
I experienced this problem while running and following a video tutorial "Creating a Basic Package," from this MSDN site:
http://msdn.microsoft.com/en-us/library/cc952921.aspx
If it helps, I have .NET 3.5 SP1 installed.

Most likely its MSXML, which is the most common one to get damaged since it supports multiple side-by-side install and uninstalls, but doesn't repair itself during SQL reinstall.
Try this:
1. Manually re-register the MSXML6 Dlls on the system where you are experiencing the problem by executing the following commands at a command prompt (you need to run these
commands from an Administrative Command prompt on the newer operating systems.)
On a 32-bit machine:
regsvr32 %windir%\system32\msxml6.dll
regsvr32 %windir%\system32\msxml3.dll
On a 64-bit system, reregister both the 32-bit and 64-bit Dlls:
regsvr32 %windir%\system32\msxml6.dll
regsvr32 %windir%\system32\msxml3.dll
regsvr32 %windir%\SysWOW64\msxml3.dll
regsvr32 %windir%\SysWOW64\msxml6.dll
2. Restart the failing application. For example, if BIDS is experiencing the error, close BIDS and start it again. Test the application in the same way which generated the error noted in the symptoms section.
3. If you are still experiencing the problem after Step 2, you may need to reinstall MSXML6 and then run Windows Update to ensure that the MSXML dlls are patched with the latest security updates. You can download MSXML6 from the following location:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=993c0bcf-3bcf-4009-be21-27e85e1857b1&displaylang=en
4. If that doesn't so it, you can run process monitor and see which COM class id in the registry, which dll, or which GAC Native Image or Assembly is out of wack.
Download Process Monitor tool,
and run it to monitor with filter process name = devenv.exe
and examine the logs of the tool to see if registry keys are reported as NAME NOT FOUND or ACCESS DENIED.
On another thread, they COM was out of wack:
http://social.msdn.microsoft.com/Forums/en-US/sqlintegrationservices/thread/52b10adf-1c8b-4f30-918c-b199ce50155b
regsvr32 oleaut32.dll
regsvr32 actxprxy.dll
Thanks, Jason
Didn't get enough help here? Submit a case with the Microsoft Customer Support team for deeper investigation - http://support.microsoft.com/select/default.aspx?target=assistance

I have deployed SSIS Package to Integration Services Server, Can i still call them in Parent Package

i have deployed SSIS Package to Integration Services Server, Can i still call them in Parent Package

Hello,
In SSIS 2008 you have to adjust your parent package in Visual Studio and point to the deployed package, as ArthurZ stated.
In SSIS 2012 with projects in project deployment mode this has become easier: you can call the child package in your project from the main package and it will use the package in the development. then you can deploy the project ot SSISDB and the
Main package in there will call the child packages in the SSISDB.
Jan D'Hondt - SQL server BI development

Error launching Integration Services Project in BIDS

A user has reported the following issue. Not sure how to help him:"Error launching Integration Services Project in BIDS Error launching Integration Services Project in BIDS I am receiving the error below when I try to create an integration services project in BIDS. I have tried manually registering the DTS.dll which is the only solution
I have been able to find in ~30mins of Google searching, to no avail."The application log shows a single warning:Visual Studio VsTemplate event ID 1One or more templates do not match any installed project packages.
Anyone seen this before?
This topic first appeared in the Spiceworks Community

Hi Anhlovevietnam,
According to the error message, it seems that the Analysis Services account lack permission to access ‘QLTICKET’. By default, the default account for AS services has only public permission to few databases. If you haven't change the AS services account,
or haven't grant the permission for this account, then you cannot deploy the AS project to server.
So in your scenario, ensure the service "SQL Server Analysis Services" is running with a proper Log On As user. This user should have administrator permission on Analysis Services and the proper permissions on the database engine. To avoid this issue, you
can grant the SELECT permission for the default account for AS services to data source DB. Or you can change the services account to this domain user who has the corresponding to the data source DB.
http://jetreportskb.host4kb.com/article/AA-00238
Regards,
Charlie Liao
Charlie Liao
TechNet Community Support

SAP Business One Integration Services Authentication Failed

Dear ,
ALL SAP forum members,
Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
In SLD B1DI and JDBC, the connections were tested successfully.
Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info and I found the following message under Action message "Wrong Usrname and Password".
I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
But could not understand much of it.
But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
I hope some experts will guide me over this issue
Thanks and regards
Ashish Gupte

Hi Konstantin Ryahovsky
Thanks for your reply. My problem is solved.
And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
Thanks & regards
Ashish Gupte

[Forum FAQ] How do I send multiple rows returned by Execute SQL Task as Email content in SQL Server Integration Services?

Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT   Category, CntRecords
FROM         [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
   // TODO: Add your code here
            Variables varCollection = null;
            string message = string.Empty;
            Dts.VariableDispenser.LockForWrite("User::Message");
            Dts.VariableDispenser.LockForWrite("User::Category");
            Dts.VariableDispenser.LockForWrite("User::CntRecords");
            Dts.VariableDispenser.GetVariables(ref varCollection);
            //Format the query result with tab delimiters
            message = string.Format("{0}\t{1}\n",
                                        varCollection["User::Category"].Value,
                                        varCollection["User::CntRecords"].Value
           varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
           Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
        ' Add your code here
        Dim varCollection As Variables = Nothing
        Dim message As String = String.Empty
        Dts.VariableDispenser.LockForWrite("User::Message")
        Dts.VariableDispenser.LockForWrite("User::Category")
        Dts.VariableDispenser.LockForWrite("User::CntRecords")
        Dts.VariableDispenser.GetVariables(varCollection)
        'Format the query result with tab delimiters
        message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
        varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
        Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

Error while running SSIS package from Integration service or via Job

Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.

Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K

Studio vs Integration services

Similar Messages

Maybe you are looking for