Study Note Service Module in SAP B1

Can anyone attach a study note of Service Module
Regards

Hi.....
You can have Help Files installed during SAP installation. And if you still want document then it is available in Portal....
Regards,
Rahul

Similar Messages

DlLoadLib: dlopen()= Could not load module

When are the db6 libraries and binaries loaded? It would appear as if the db6 binaries are not loaded on this machine. Are they loaded as part of the Central Instance install - or perhaps the database instance installation.....
The file listed below does not exist - nor do the db6 executables that would normally be found under /sapmnt/<SID>exe
disp+work information from my server
kernel release                700
kernel make variant           700_REL
compiled on                   AIX 2 5 005DD9CD4C00
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  May 21 2007 20:41:26
Thu Dec 27 14:48:17 2007
ERROR => DlLoadLib: dlopen()= Could not load module /usr/sap/UV3/SYS/exe/run/dbdb6slib.o.
System error: No such file or directory -> DLENOACCESS (2,No such file or directory) [dlux.c       314]
update level                  0
patch number                  111
source id                     0.111
supported environment
database (SAP, table SVERS)   700
operating system
AIX 1 5
AIX 2 5
AIX 3 5

Hi Timothy,
SAP Executables like disp+work, R3trans, R3load, tp, etc. that connect to the database load the SAP database interface library ( dbdb6slib.* ).
The are looking for this library in the current path or in the directory indicated by DIR_LIBRARY. In your case the SAP executable tries to load /usr/sap/UV3/SYS/exe/run/dbdb6slib.o .
The SAP database interface library itself dynamically loads the DB2 CLI libraries. If you are using a DB2 runtime client the DB2 CLI libraries ( libdb2.a and dependent libraries ) are expected to be located in ~($DB2INSTANCE)/sqllib/lib . This is typically /db2/db2<dbname>/sqllib/lib.
Only if libdb2.a is not found in this path LD_LIBRARY_PATCH or LIBPATH will be searched.
The library search path is automatically assembled by the SAP executables from DB2INSTANCE which is set by SAPINST. You do not need to include the path to the DB2 libraries in LD_LIBRARY_PATCH or LIBPATH explicitly. On the other hand if you accidently include the wrong path in LD_LIBRARY_PATCH or LIBPATH , the SAP executable will still try to load ~($DB2INSTANCE)/sqllib/lib/libdb2.a but the dependent libraries of libdb2.a may be taken from the wrong path.
Regards
              Frank

Customer Services module - error message no.IW295

Hi experts
Ithe following is an error related to Customer service module in SAP
"Relevance to MRP set at 3, as order released or activated
Message no. IW295"
can any body get solution.
thanks andregards
DSR

Hi,
Kindly refer the below thread:-
Creating Material Reservations with a PM Order
Thanks & Regards,
Rahul Verulkar

Solution Manager does not get service definitions from SAP in self diagnosi

Hi,
In our production solution manager transaction solution_manager, self diagnosis we are getting a warning message on our development solution manager.
Solution Manager XXX does not get service definitions from SAP.
The production Solution Manager is the master in SDCCN for the test Solution Manager. In the test Solution Manager, the scheduled task REFRESH SERVICE DEFINITIONS has task System ID of O01. It is pointed to RFC destination SDCC_OSS, not the production Solution Manager system.
It gives the same warning if I point the task to the production Solution Manager system.
Has anyone seen this before? Any ideas?
Best regards,
Russ

Hi,
i guess have you activated SDCCN from your solution manager system too?
if not please activate. since that setup helps solman retrive the service definitions used in SDCCN from SAP (SAPOSS).so this ultimately allows you to set solution manager system as Master, so all the satellite system get the service definition from solman and do not need a direct SAPOSS connection.
and Please check this Note 1143775 - SAP service content update
the wiki for trouble shoot ["EarlyWatch Alert is Red Flagged - how to resolve" |http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=228262728]
please check.
Thanks,
Jansi

Sales Quote and Sales Order for Service Module.

Hi All,
I have a scenario with one of the customer where they have a Service Department. The customer is into installation and servicing of Air conditioning systems.
The scenario is as mentioned below:
Customer does the installation of Air Conditioning work and then provides service to the same, if contract mentioned that service is also to be provided by same team. There are also times when the customer quotes only for Servicing of the Air Conditioning in the Projects where the installation is not done by them, but a third party. In such case the customer sends his Sales Quotation for taking up the Servicing of the Air Conditioning (AMC for a year), to be provided to the principle client. If he wins the opportunity then the same will be transferred to Sales Order.
Now in SAP Business One the Service Module starts only with Service Contract and Service Warranty Templates. This is considering that the equipments are delivered by the Contractor him self. This scenario is fine.
But for equipments which are not delivered by the customer, then manual Customer Equipment Card can be prepared and then service contract created to it. But here there is a disconnect between the Quotation that they send to principle and attaching the Sales Order, if the Service Bid is won by Customer. If i need to keep a reference as to which Sales Order was received by Customer from Principle in Service Contract, there is no provision for same.
Is there any way i can do it other than creating a UDF and linking the sales order number to Service Contract and not developing any screens for same?
Require all your valuable inputs..
Regards
Rohan S. Kamble

Hi Rohan........
There is no such standard field in Service Contract to attach Sales Order. You can create UDF else you can have FMS and map it to remark field.
And when you copy it to service call you can attach the same SO at Activity level or it will be attached automatically as yiu are defining it into the service contract.........
Regards,
Rahul

Service Module !!

Hello Experts,
how do you rate the service module in SBO, i have one problem as my work is in distributed environment, i have got technicians who are on the field all the time with few equipments. They come office once in a while.
I would like to manage their Scheduler and time Sheets in SBO which further can be incorporated to their payroll.
I am looking for this kind of a Solution.. can any body suggest how to handle it ????
All hrs get posted to SAP
- Productive hrs to sales orders (hidden line)
- Productive hrs to service calls or job numbers (when these get invoiced we need the lab hrs hidden as above)
- Non productive hrs to zero value sales orders/invoices (one per engineer) for weekly invoicing and onward analysis
If there was a front end it would need to post all these hrs to SAP and send a report of the hrs (in summary form) to the payroll clerk for onward payment of wages
Reporting then needs to be as follows
- Productive hrs via sales orders u2013 Standard SAP Gross Profit reporting
- Productive hrs to service call/job number u2013 When these are invoiced will the costs come forward and can they be reported on
- Productive hrs to sales orders and/or jobs not yet invoiced u2013 How can this be reported on???????
- Non productive hrs u2013 Book them to sales orders and report in the same manner
- Can we report on outstanding orders (SOP) not ALL orders
Please help !!

Hi,
thanks for the valuable suggestions, i have evaluated Enprise but thats going to be addition expense and support cost.
i just want to explore one possibility... please help
Can i just import excel sheet of time sheet from all the various technicians ??
Is there any template or utility by which i can sync with MS-Excel ??
please reply

I am a SAP Netweaver Consultant , want to know from all the SAP Experts out here that according to you which are the highest paying modules in SAP ? rank them.

I am a SAP Netweaver Consultant , want to know from all the SAP Experts out here that according to you which are the highest paying modules in SAP ? rank them.

Hi S. Vishwam.
Many peoples says that BI , APO , BW and HANA are the highest paying modules.
But with the passage of time the value of the professional decreases because many people go work with this modules then ...supply and demand = decreases.
Only the people that really knows continue making lots of moneyand the characteristic of these people are the same:
They always read the SDN community of his modules.
They really study the sap help.
They do not want to make lots of money early on.
Hope helped you.

Service Module Add-On

I'm looking to expand the functionality of the service module and feel an add-on is the way to go. My choices seem to be:
1. A VAR designed add-on
2. A 3rd party 'service' add-on (Coresuite, Enprise, Maringo etc.)
As SAP has quite a lot of functionality I'd like an add-on that doesn't recreate the wheel as some seem to do.
My questions therefore are these:
1. Does anyone know of a VAR specific add-on?
2. Do the experts know of any other 3rd party add-ons I could try that are not listed above?
Thank you in advance.
Martin Lewis

Hi,
Please refer document for marking answers:
http://scn.sap.com/community/support/blog/2013/04/03/how-to-close-a-discussion-and-why
Thanks & Regards,
Nagarajan

Service module web service

Greetings,
Is it possible to develop a web solution for service module and sales opportunities module of SAP Business One 2007B/2005B. As i went through the web services offered by DI server, i could not find one for the service module and sales opportunity module. Can u please guide me.
Regards,
Gokul K.

Hello Gokul K,
ServiceCall and Activity etc objects in Service and Sales Oppotunity module are not supported in B1WS right now. But You still can develop your web solution via DI Server. You may refer to the following link for how to add a service call via DI server.
[Re: Add a Service Call using B1WS|Re: Add a Service Call using B1WS]
Kind Regards
-Yatsea

Highly Required CRM 5.0 Best practices for CRM Service Module

Dear all,
I have been searching for CRM 5.0 version best practices in Internet quiete a long period, but could not find anywhere.
currently SAP is providing only best practices for SAP CRM 2007 version.
since most of configuration is differing because of Webclient Interface, I request you to refer a source from where I can get the CRM 5.0 Best Practices for Service module.
Your suggestions and help will be highly appreciated.
Best regards
Raghu ram

Hi Srini,
<removed by moderator>
Thank you & Best regards
Raghu ram
Edited by: Raghu Ram on Jul 16, 2009 6:09 AM
Edited by: Raghu Ram on Jul 16, 2009 6:11 AM
Moderator message please review the rules of engagement located here:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/home/rulesofEngagement
Edited by: Stephen Johannes on Jul 16, 2009 8:12 AM

Is there any BAPI for new appraisal module in SAP 4.7 ?

Hi,
In our company, we are using our own web-ESS Appraisal (employee self service on intranet), developed using Java. So we are using available standard BAPIs to exchange data between web-ESS and SAP.
But I notice for the new APPRAISAL module in SAP 4.7, we cant use the standard old BAPIs anymore. SAP gives hundreds of new function modules related with the appraisal module, but none of them is remote-enabled module or BAPI. So how are we supposed to exchange data using our web-ESS? I dont want to copy all the standard functions just to make it remote-enabled so I can use as a customized BAPI! Any idea?
Regards,
Irman

hI,
        There is no function module that can get you the Appraisal Result from OSA in one go.. You have to create a custom function that is a combination of delivered modules.. here os one that I created.. you pass the pernr & get back the rating..this is only for Performance Appraisals.. Some of the code I pasted may not be relevant..you can use my approach to meet your reqt..
data: lt_appraisee       type standard table of hrpe_appraisees
                                with non-unique default key,
        lt_appraisal       type standard table of hrpe_appraisals
                                with non-unique default key,
        lt_pt1045_ext      type standard table of pt1045_ext
                                with non-unique default key.
data: ls_key_objects     type hrwpc_s_keyobjec,
        ls_column_content type hrwpc_s_keycolcont,
        ls_period          type hrwpc_s_ep_period,
        ls_validity_period type hrsel_period,
        ls_appraisee       type hrpe_appraisees,
        ls_appraisal       type hrpe_appraisals,
        ls_pt1045_ext      type pt1045_ext.
data: l_subrc            type sy-subrc,
        l_otype            type otype,
        l_content          type hrwpc_s_keycolcont-content.
data: w_content          type hrwpc_s_keycolcont-content.
data: t_templates type hap_t_hrobject,
        rec_template type hrobject,
        t_appraisees type hap_t_hrsobid,
        rec_appraisee type hrsobid,
        rec_sel_with_or_without type hap_s_sel_with_or_without,
        rec_sel_status type hap_s_sel_status,
        rec_sel_dates type hap_s_sel_dates,
        t_appraisal_id type hap_t_appraisal_id,
        rec_appraisal_id type hap_s_appraisal_id,
        rec_bal_s_msg type bal_s_msg.
data: w_apprsl_id type hap_appraisal_id,
        w_appee_id type hap_appraisee_id,
        w_rating type hap_value_num.
constants:
           c_ap_id(8) value '50001379',
           c_fapp(4) value 'FAPP',
           c_01 type hap_plan_version value '01',
           c_p value 'P',
           c_va(2) value 'VA',
           c_pa type hap_add_on_application value 'PA'.
constants: c_0101(4) value '0101',
             c_1231(4) value '1231'.
initialize export parameters
clear: coltype,
         column_content[],
         column_content,
         sort_column_content[],
         sort_column_content.
set coltype
coltype = gc_col_sortable.
get object type for persons
perform re77s0(mstt77s0) using 'OTYPE'
                                 'PERNR'
                                 l_otype
                                 l_subrc.
if l_subrc <> 0.
    l_otype = 'P '.
endif.
get selection period
call function 'HRWPC_EP_CALC_PERIOD'
    exporting
      keydate      = key_date
      years_past   = '01'
      years_future = '00'
    importing
      period       = ls_period.
move-corresponding ls_period to ls_validity_period.
concatenate ls_validity_period-begda+0(4) c_0101 into
                         ls_validity_period-begda.
concatenate ls_validity_period-begda+0(4) c_1231 into
                         ls_validity_period-endda.
fill export table
loop at key_objects into ls_key_objects where otype = l_otype.
    clear l_content.
    clear: rec_template,rec_appraisee,rec_sel_status,rec_sel_with_or_without,
           t_templates[],t_appraisees[],t_appraisal_id[],rec_appraisal_id.
    rec_template-plvar = c_01.
    rec_template-otype = c_va.
    rec_template-objid = c_ap_id.
    append rec_template to t_templates.
    clear rec_template.
    rec_appraisee-plvar = c_01.
    rec_appraisee-otype = c_p.
    rec_appraisee-sobid = ls_key_objects-objid.
    append rec_appraisee to t_appraisees.
    clear rec_appraisee.
    rec_sel_status-ap_status_1 = true.
    rec_sel_status-ap_status_2 = true.
    rec_sel_status-ap_status_3 = true.
    rec_sel_status-ap_status_4 = true.
    rec_sel_status-ap_status_5 = true.
    rec_sel_with_or_without-sel_display_existing = true.
    rec_sel_with_or_without-sel_display_without = true.
    rec_sel_dates-validity_from_date = ls_validity_period-begda.
    rec_sel_dates-validity_to_date = ls_validity_period-endda.
    call function 'HRHAP_DOCUMENT_GET_LIST'
      exporting
        add_on_application    = c_pa
        plan_version          = c_01
        t_templates           = t_templates
        t_appraisees          = t_appraisees
        s_sel_dates           = rec_sel_dates
        s_sel_status          = rec_sel_status
        s_sel_with_or_without = rec_sel_with_or_without
      importing
        t_appraisal_id        = t_appraisal_id
        s_return              = rec_bal_s_msg.
    if rec_bal_s_msg is initial.
      read table t_appraisal_id into rec_appraisal_id index 1.
      select value_num into w_rating
                          up to 1 rows
                          from hrhap_final
                          where plan_version = c_01
                            and appraisal_id = rec_appraisal_id-appraisal_id
                            and column_id = c_fapp.
      endselect.
      if sy-subrc eq 0.
        write w_rating to w_content decimals 0.
      else.
        clear w_rating.
      endif.
    endif.
    l_content = w_content.                                 "SD1K909622
fill column content structure
    clear ls_column_content.
    move-corresponding ls_key_objects to ls_column_content.
    ls_column_content-content = l_content.
    append ls_column_content to column_content.
endloop.
endfunction.
Regards,

EDI 810 - Delivery note/service entry sheet does not exist

Hello,
When 810 Inbound Invoice IDOC is processed with two different materials having the same delivery note number using the function module IDOC_INPUT_INVOIC_MRM, the IDOC post with error code '51 Delivery note/service entry sheet does not exist' Message class M8 Message number 183. The goods receipt has already been posted for the materials with the same delivery note number in SAP.
Any feedback??
Thanks

Hi
i had a Similar issue, where the IDOC is getting stuck with Delivery note does not exist.
You can check Note 1063742. this may help you here. If the note does not work for you then there could be an issue with the fucntion module ME_SELECT_DOCUMENTS since it is only looking for table EKBE-VGABE. where vgabe EQ '1' OR vgabe
EQ '6' but the delivery document no in the table is 8.
I am guessing that this could be the issue. My Issue is still not resoved, so i thought of sharing my inputs with you.
this may work for you.
If this is already solved for you do let me know what has been done here.

Executable does not exist: F:\usr\sap\PD1\JC01\j2ee\os_libs\adssap\XMLFormS

Hi All,
I am currently trying to setup a standard PCR and have gone through the steps for configuration, and I am going to run my Personnel Change Request, but it throws and exeptions and bombs. One of the key lines I could piece together from the Stack Trace is the follow:
<b>Caused by: java.io.IOException: Executable does not exist: F:\usr\sap\PD1\JC01\j2ee\os_libs\adssap\XMLFormService\bin\XMLForm.exe
     at com.adobe.service.ProcessResource.startProcess(ProcessResource.java:252)
     ... 42 more
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:374)
     ... 51 more</b>
This would lead me to believe that ADS or XMLForms was not installed, or installed correctly.
Could anyone provide any clarity to this situation?

Hello,
fist make sure you use a supported plattform for ADS:
http://service.sap.com/PAM
If it it supported try the following:
If these files are not exist, it might be caused by deployment or
synchronizing binaries (bootstrap). In order to force synchronize
os native module, please try follows:
    Stop J2EE engine
    rename version.bin to version.bin.old
     this file can be found under /usr/sap/<SID>/JCxx/j2ee/cluster
    Start J2EE engine
If deployment is correctly done, native files will be downloaded.
Best regards,
Dezso

XML Publisher with Service Module - Service Request Reports -- URGENT

Hi all ... any pointers/help/guidance with the problem listed below would be much appreciated.
I'm working in the context of the Oracle Service Module & Service Request Reports.
I'm required to configure the XML Publisher Responsibility seeded functionality with the service module reports.
Listed below are the two reporting requirements that I'm considering , corresponding to the following seeded XMLP Responsibility seeded components:
(I'm quoting an extract from the Oracle TeleService Implementation & User Guide here).
Detailed Report
Data Definition: Service Request Detail Definition (CS_SR_DETAIL_DEF)
Corresponding Template: Service Request Detail Report Template (CS_SR_DETAIL_TMP.en)
Template Description: Includes all of the available service request attributes including charges, the two descriptive flexfields, and extensible attributes.
Summary Report
Data Definition: Service Request Summary Definition (CS_SR_SUMMARY_DEF)
Corresponding Template: Service Request Summary Report Template (CS_SR_SUMMARY_TMP_en)
Template Description: Includes a subset of the detailed report attributes including the same charges information as the detailed report.
When I log into the EBS >> XML Publisher Administrator Responsibility >> Service Application ... I find these seeded XMLP components, together with the preview data, downloadable templates & sample output.
The question is:
Where (responsibility/application/navigation/etc.) do I find the seeded EBS Service Reports to provide the expected XML input to the seeded XMLP Service Request Data Definitions & Templates????
Notes ...
I have found the following two reports, under the Service Application in EBS, set their output type to XML and viewed the output of the submitted request:
- Service Request Detail Report
- Service Request Summary Report
... but each of these two reports produce XML output of a different data model/structure to that expected by each of the corresponding seeded XMLP data-definitions/templates.
Additionally, I cannot find any corresponding concurrent program definitions on the system with the same SHORT-NAME/CODE as the seeded XMLP data definitions themselves i.e. CS_SR_DETAIL_DEF and CS_SR_SUMMARY_DEF.
Are the necessary reports not actually seeded within EBS? Do the seeded XMLP data definitions & templates require development of new Concurrent Programs from scratch to access the database tables and provide the necessary data/input, or am I missing something here??

I am sure you found a solution to your problem. If not, to give a pointer to this issue, I guess these reports are gererated right from the service request screen and this definition is used there.This report can be generated from several places based on where you are within SR scree.
Thanks
Nagamohan

How to configure link between 2921 and SM-D-ES3G-48-P EtherSwitch Service Module

hi,
I can't do that like the procedure given by Cisco.
http://www.cisco.com/en/US/partner/docs/routers/access/interfaces/software/feature/guide/eesm_sw.html#wp1942894
Cisco Procedure :
interface gi10/0
ip address x.x.x.x x.x.x.x
service-module gigabitethernet 1/0 session
My result :
R2921-8CPITR-1(config)#int gi 1/1
R2921-8CPITR-1(config-if)#ip address 2.2.2.2 255.255.255.192
% IP addresses may not be configured on L2 links.
R2921-8CPITR-1(config-if)
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1.1 ?
% Unrecognized command
R2921-8CPITR-1(config)#interface gigabitEthernet 1/1 ?
<cr>
R2921-8CPITR-1(config)#
the session is not possible also ?
R2921-8CPITR-1#service-module gigabitEthernet 1/1 sess
                                                  ^
% Invalid input detected at '^' marker.
R2921-8CPITR-1#
The routeur said that it's not a L3 port, so how to configure it to allow communication between the 2921 and the card ?
Is there a bug with that version I'm in 15.1(4)M4 ????
R2921-8CPITR-1#sh ver
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 18:57 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M15, RELEASE SOFTWARE (fc1)
R2921-8CPITR-1 uptime is 19 hours, 21 minutes
System returned to ROM by power-on
System restarted at 16:00:45 GAB Fri Sep 14 2012
System image file is "flash0:c2900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO2921/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FGL1618119E
6 Gigabit Ethernet interfaces
2 terminal lines
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO2921/K9          FGL1618119E
Technology Package License Information for Module:'c2900'
Technology    Technology-package           Technology-package
              Current       Type           Next reboot
ipbase        ipbasek9      Permanent      ipbasek9
security      None          None           None
uc            None          None           None
data          None          None           None
Configuration register is 0x2102
R2921-8CPITR-1#

Same issue here.
I just waited a few minutes and the interface went down and back up, this time it was a L3 interface.
My guess is that it was booting the switch module IOS, and it detected it until it was fully booted:
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:52.091: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:26:52.795: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down
Apr 11 05:26:53.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
Apr 11 05:27:46.895: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
Apr 11 05:27:46.947: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down
Apr 11 05:27:47.031: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down
Apr 11 05:27:47.083: %LINK-5-CHANGED: Interface GigabitEthernet1/0, changed state to administratively down
Apr 11 05:27:47.895: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
Apr 11 05:27:48.083: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to down
Apr 11 05:27:49.283: %IP-5-WEBINST_KILL: Terminating DNS process
Apr 11 05:27:52.499: %LINK-3-UPDOWN: Interface GigabitEthernet1/1, changed state to up
Apr 11 05:27:53.087: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.1(4)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 04-Sep-12 16:50 by prod_rel_team
Apr 11 05:27:53.255: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start
Apr 11 05:27:53.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to up
Apr 11 05:28:21.435: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Apr 11 05:29:22.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to down
Apr 11 05:29:22.095: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
Router>en
Router#sh ip int brief
Interface IP-Address OK? Method Status Protocol
Embedded-Service-Engine0/0 unassigned YES unset administratively down down
GigabitEthernet0/0 unassigned YES unset administratively down down
GigabitEthernet0/1 unassigned YES unset administratively down down
GigabitEthernet0/2 unassigned YES unset administratively down down
GigabitEthernet1/0 unassigned YES unset administratively down down
GigabitEthernet1/1 unassigned YES unset up down
Vlan1 unassigned YES unset down down
Router#
Apr 11 05:29:46.106: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1, changed state to upconf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int g1/0
Router(config-if)#ip add 1.1.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
Apr 11 05:30:09.046: %LINK-3-UPDOWN: Interface GigabitEthernet1/0, changed state to up
Apr 11 05:30:10.046: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0, changed state to up
Router(config-if)#end

Study Note Service Module in SAP B1

Similar Messages

Maybe you are looking for