Study of software update quality - your help is ne...

Hi everyone,
We’re conducting a study related to our Symbian software updates and we
would value your feedback. The scope of this study is to find out what
you have noticed after you have update your phone
with a new version of software. We hope to identify possible risks and
gaps in our current ways of working and the overall
intention is to improve the quality of our software
updates.
The devices that we’re
interested in for this study are: Nokia N8, Nokia C7-00, Nokia C6-01 and Nokia E7-00.
This doesn’t mean that we’re not interested in other devices, but we’ll have to
narrow down the scope a little bit for this study.
If you want to help us, please answer
the questions below and send the questionnaire via email to
[email protected]
Please note that this e-mail
address is only for users participating in this software update study, and whilst we appreciate the time that you take
in helping with this, we regret that we are not able to enter into individual
correspondence regarding this study, and will also not be able to help with
general issues via this mailbox. Should you need help with any matter
concerning your
Nokia device, we invite you to post your questions to our Nokia Support
Discussions community or contact your local Nokia Care line.
1)      Device
name
E.g. Nokia E7-00
2)      IMEI
of the device (found by keying ‘ *#06# ‘ from the
homescreen.)
3)      SW
update method which was used
E.g. Ovi Suite, Nokia Software
Updater or over-the-air software update
4)      Symptoms
after the update
E.g. “Home screen content
changed” or similar issues.
Thanks for your support!
Best regards,
Teemu aka. Laitos
Nokia Software Update Management

model: N8(canada 059D391)
updater 1.1 
OTA: got update on may 17
OviSuite: detected phone but didnt didnt detect a newer update
issue:
Just right after update(pr 1.1): application menu was just slow on showing the icons and also slow scrolling on clicking applications ( until now) and i dont have much icons which i didnt really feel before on pr 1.0)
After update(pr 1.1): when wifi connects and breaks from the minimum coverage of the connection, a sign" Connection not found" pops up and lags the phone the whole day or until i get another wifi connection and disconnect from the connection formally.
upon updating(pr 1.1): I updated through wifi but it went to my own data plan even though the phone is connected to wifi.
my own problem:
wifi connects but if the internet is not used the wifi connection breaks and i would reconnect again if want to use internet again. should it just act like a laptop and connects all the time until the user doesnt need the wifi connection anymore

Similar Messages

  • Software update and iLife help not working in Admin account

    For the last few weeks (maybe since iLife 11 was installed) software update and iLife help has quit working on the single administration account on my iMac. All works fine on the secondary accounts.
    If I try to use software update it says everything is up to date, even though I know there are updates available that can be seen if checking from a different account on the machine. In iLife, if I try to access the help files it tells me I need to download them. I click to download and after a few seconds it takes me back to the front help page and I then go through the entire process again but the help download never happens. On secondary accounts the help files work no problem.
    I've tried many of the tips for deleting helpfile plists, but nothing seems to work for me.
    Can any kind person list for me everything I should look to delete or move in the account to get these things working again?
    It would be much appreciated!

    Since the issue is specific to your original user account, you can proceed in two ways. One is to log into your new account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything on that other account's list from the original account's Preferences folder into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
    The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

  • HT1222 The new IOS 7.0 version for my iPhone 4S keeps telling me its unable to verify software update. Please help?

    The new IOS 7.0 version for my iPhone 4S keeps telling me its unable to verify software update. Please help?

    Go to appleid.apple.com.  Log in with your Apple ID & password.  Update your contact information.

  • HT4623 I have wifi connection on my ipod and it tells me there is a software update as there is a no. 1 at the side of it but when i try to update if tells me unable to check for update An error has occurred while checking for a software update. why? help

    My ipod will not let me access any apps using wifi, it indicates at the top of the screen that there is a strong wifi source but it refused to work on wifi apps. I think this is because if need an update but will not let me as it says an error occurred while looking for a software update. can anyone help please thankyou. my ipod is 4th generation btw

    my ipod is not the newest update possible as i said i tried to update but it wouldnt let me as it wont let me on wifi sources such as safari facebook and other apps which use wifi.all the apps are fully updated

  • HT1338 I'm trying to update the drivers on my epson dx4400 on Mavericks. Software update doesn't help. Any ideas?

    I'm trying to update the drivers on my epson dx4400 on Mavericks. Software update doesn't help. Any ideas?

    You could try deleting the /Library/Printer/EPSON and the /Library/Caches/Epson/ folder and then reinstalling the updates.

  • Can't upgrade my MAC os from 10.7.5 to the latest available . Usual way of software update does not help. Keeps saying you have the latest update .

    I can't upgrade my MAC os from 10.7.5 to the latest available .
    Usual way of software update does not help.
    Keeps saying you have the latest update .

    To get beyond 10.7.5, you must go to the App Store and purchase an upgrade.
    Currently Mavericks is free
    Allan

  • How do I update my iPad 2 to iOS 5, I tried going to settings,general ,software update but I can't seem to find the software update button pls help :)

    How do I update my iPad 2 to iOS 5, I tried going to settings,general ,software update but I can't seem to find the software update button pls help :)

    Go to Settings > General > About and see what iOS version you are running.  If it is lower than 5, you won't find the software update button.  It was added when iOS 5 came out.  The current iOS is 5.1.1.  To update to the current OS, you'll need to connect to the computer you sync with (this is important - do not connect to a computer you do not sync with as you will lose you apps) and update the software in iTunes.  Once you have updated to the 5.1.1, the software update button will be in Settings going forward.  Make sure you have a lot of time.  Updating from below 5 to 5 or higher is a somewhat lengthy process.
    This link will provide the guidance you need:
    http://www.macworld.com/article/1162925/how_to_upgrade_your_ios_device_to_ios_5. html

  • Why is my ipad doesnt have a software update?please help,i cannot find it.. :(

    why is my ipad doesnt have a software update?please help,i cannot find it..

    The ipad 1 (no camera) can't be updated beyond IOS 5.1.1.

  • Mac not working right after software update. Please Help...

    I turned on my computer today and first thing I was asked when I logged in was if I wanted to update my software because there is new updates available. So I click on update so my computer will stay up to date......Well big mistake Now I cant open my itunes, my safari, my quicktime player, or even my Microsoft word, everything is messed up I keep getting "program quit unexpectedly" from everything. I have been trying everything today to get my computer back to normal, but no luck. I have read something about "permissions not being compatible". I have no idea Im clueless I know nothing about computers. Please Help! I made a big OOOOOOps

    It finally powered on after 3 battery pulls, but now it does not make or receive calls (((
    Everytime I connect it to blackberry link it says software update available, so I clicked on install, it said downloading update and then nothing happens, the download bar becomes full then nothing changes
    I also tried to reload device software, i got a message saying checking repair software and it stayed like that for 3 hours then the device rebooted but nothing happened at all
    I even tried redoing the software update from the phone itself 3 times, everytime it would say update successful but the phone would still not make or receive calls
    Please help I dont know what to do....could the problem with blackberry link be that im using it on a mac??
    I appreciate your help

  • HT1338 my mac needs updating-currently 10.5.8, but when i click on software update and it searches it says there are no software updates? any help please

    I updated my iphone to IOS 6 which means i also need to update my itunes. When i tried to do this it said I need to update software but when I click on software update, it searches and then says no updates available. Can anyone help me please? thankyou very much

    10.5.8 is the final version of Leopard. After that you need a paid-for upgrade to Snow Leopard - if your Mac can run it:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    Whilst Apple have withdrawn Snow Leopard from download, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30.  You can also purchase the code to use to download Lion from the same number.
    If you are outside the US call your national Apple Helpline:
    http://support.apple.com/kb/HE57
    If you're in the UK, use this number: 0871 508 4400
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.

  • My Droid2 Global will not pair to My Ford SYNC since the latest software update.  Please help!

    Since the latest update, my Droid2 will not pair to my Ford SYNC.  The phone will not find SYNC for me to place in the PIN.  It use to work wonderful before the latest update.  
    I can not drive and talk on my phone without SYNC.  Corporate Car- Corporate Policy.
    Thanks for your help.

    Hello rosalee2340,
    Thank you for sharing your concern as I am more than happy to assist you! Are you able to successfully pair your Droid 2 with another bluetooth device, like an earpiece or a computer? This will help us determine if there is an issue with the bluetooth technology after the software update or is it a compatibility issue. Also, what year and model vehicle do you have? In order to successfully pair with the vehicle, the Droid 2 must be in discovery mode. Below is a link to walk thru placing the Droid 2 into discovery mode.
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=34745
    Once the phone is in discovery mode, the next step would be to attempt to pair with SYNC again. Here is a video link with the steps on how to pair a phone with SYNC.
    http://syncsupport.ford.com/servlet/technology/connect-phone-sync
    If the pairing is unsuccessful then you can contact the dealership for assistance with the pairing process and/or for an updated device compatibility list of phone. Let me know how the steps above works out for you.
    Thank you...

  • Software update say "your software is up to date" but i only have 10.4.1

    i just got this computer used and I wanted to get the newest itunes update but it says it needs 10.4.9 or newer.
    so i click on the apple software update and it searches for a new update then it says "your software is up to date" but about this mac says i only have 10.4.1 and i want the 10.4.11.
    What is wrong??? any help will be appreciated!!!

    Hopefully you received the computer's original OS X
    software packet with install/restore discs within it.
    This, and if the computer had been upgraded to a
    newer OS X version than the original installer's,
    there should also be that retail installer disc, too.
    There may be some system parts missing, and a
    previous owner may have tried to use Trash to
    get rid of private user accounts. If this happened,
    there may be issues in the remaining system.
    Can you further describe the exact computer model,
    build date, and configuration of processor, RAM,
    hard drive, so as to tell what it really is? There are
    some that look quite a bit alike, but the insides are
    often different enough and may have shipped with
    other hardware and software.
    For some comparative information, you could get &
    read through a database from http://mactracker.ca
    which would show most every Apple computer made
    and their specifications, build date, and model nos.
    Good luck & happy computing!

  • How Do you abort a software update from your iTouch

    Help! How do you stop a software update that is being downloaded from your iTouch??

    You shouldn't as it may cause a myriad of other issues.  Why do you want to abort it?
    B-rock

  • 1 year old MacBook Pro wont let me do a software update. Please help :(, 1 year old MacBook Pro wont let me do a software update. Please help :(

    Hi everyone,
    I purchased my MacBokk Pro a little over a year ago brand new from an Apple store. As of a few month ago it refuses to do a software update. It says it cant connect because of a network problem, but when I run a network diagnostic it says there is no problem. Please help me

    No specific update. Just trying to check for software updates and it wont even let me check for one. I know there will be many updates to do because it hasnt let me check for updates in months

  • PB fails after software update frezze, need help, help!!!!

    I have a 15" Powerbook G4 i ran software update, After installing the new ichat (w/video) ask me to conect the camera, wich i dont use, somewhere in that process it froze having to force quit the update. After that i turn off the PB. Next day i try to turn it on, and nothing happens, I hit the power button, heard the hard drive spin up for a few seconds, then a little squeak, then nothing. I tried to power up with option-command-p-r. Same result. I powered on and inserted my Sturt up disk and run the utility, tell me that is ok, restart it, nothing. Inserted the hardware test cd, same result, I've also tried removing and swapping the RAM. I only have the grey screen with Apple logo and the dial thing moving. thats it!

    Let me introduce you to your new best friend, the knowledge base.
    http://docs.info.apple.com/article.html?artnum=14449

Maybe you are looking for

  • HT1495 Syncing multiple devices on the same computer.

    There are 2 phone and an itouch that get synced to the same iTunes, 2 are under the same apple ID, the other is different. The music is an easy fix on syncing the different devices, but there is an issue with the apps. The apps on the itouch automati

  • IdM 8.1: Problems to provision Solaris 10 with non root user.

    Hello When IdM 8.1 tries to create a user into Solaris 10 I got this Error: com.waveset.util.WavesetException: An error occurred adding user 'testSolaris' to resource 'Test_Solaris'. com.waveset.util.WavesetException: Script failed waiting for "_,)#(

  • Attended Xfer on A SPA500S 32 Button Attendant Console

    I have a CISCO 504G with a SPA500S 32-Button Attendant Console.  I had this all configured just the way I like it, when I had to remove the Attendant Console for a recent move.  Now I have my console all programed with all my speed dials (employee ex

  • How do I get this to stop asking me to register?

    I am already a Cloud member...but I keep getting a constant message everytime I open Photoshop or Illustrator or Dreamweaver, to register.  I have been a member for more then 4 months!!!  Enough already!!!

  • Genral question on equipment and functional location....

    hi, what I have to learn on functional location and equipment other than the below concepts creating euipment and installation, and customizing like screen sequences of Fun.  locations and equipment.... and field selection for functional locations an