Studying in the UK for 4 months this fall

Hi! I'm planning on purchasing an unlimited calling plan to the US and Canada before I go abroad to the UK this fall and I have a few questions.
1. I should have no problem using the plan abroad since I will be purchasing it in the US, correct?
2. The price of $2.99 a month includes mobile numbers, right?
3. If I purchase the 3 month plan, can I switch and buy just one extra month when I'm abroad, or will it automatically enroll me in another 3 months?
4. If I do only go with 3 months, am I going to have a problem renewing since I am out of the United States?
Sorry for all the questions...I just want to make sure I'm going to be able to call home whilst away!

Answers are as follows:
1. It doesn't matter where you purchase your subscription it still works the same way.
2. Unlimited US and Canada includes mobiles.
3. Probably it would be easier if you sign up for monthly subscription. It will be extended every month automatically and you can stop recurring payments whenever you wish. (After 3, 4, 5 etc months)
https://support.skype.com/en/faq/FA1881/How-do-I-cancel-my-subscription
4. If you go with monthly subscription then recurring payments will be done automatically until you stop it. There shouldn't be any problems as long as your funding source(credit card, PayPal account etc) has money
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Similar Messages

We still can't print an invoice of our Creative cloud. There's a failure in the system FOR 8 MONTHS NOW. Why can't this be solved ??????????

We still can't print an invoice of our Creative cloud. There's a failure in the system FOR 8 MONTHS NOW. Why can't this be solved ??????????

Yes I have been in contact. Thanks in advance,
Met vriendelijke groet, With kind regards,
Hotel Mitland
Rob Plijnaar
Directeur

Studying abroad in London for 4 months - international plan

I'm going to be studying abroad in the UK for 4 months starting in January. I want to be able to use my iPhone while I'm abroad, in the most cost-efficient way possible. I've looked at the AT&T World Traveler Plan that is $5.99 per month, and 99 cents per minute. 99 cents per minute seems ridiculous! Is that plan in addition to the basic U.S. iPhone plan that I have now or does it take the place of my current plan?
I've read stories here on the discussions about people getting a $1,000+ wireless bill for their overseas usage, and I want to avoid that.
What about the option to unlock the iPhone from AT&T and use a SIM card from a wireless carrier in the UK? I've been told that wireless companies are required by law to do this if the customer asks... but the AT&T customer service rep. I asked today said this is not possible because of the exclusive agreement between AT&T and Apple. What's the deal with this?
Any help would be appreciated. Thanks.

If you do get a UK SIM (on your unlocked iPhone or on a cheap UK mobile), it will not be cheap to use to ring the US, whether you use Vodaphone or Tesco - sign up to 18185.co.uk and use their numbers to make cheap US calls - currently .5p/min on landlines and 1p/min on mobiles. See
http://www.18185.co.uk/mobilerates.php
for details.

In flex charts the label for next month get dropped

I found for DatatTimeAxis if you set disabledRanges to the last date of the month the label for next month gets dropped using property labelUnits='months". Any ideas? Below is the code:
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
     <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               [Bindable]
               public var stockDataAC:ArrayCollection=new ArrayCollection([{date: "2005, 6, 1",
                         close: 30}, {date: "2005, 7, 31", close: 25}, {date: "2005, 8, 3",
                         close: 40}, {date: "2005, 9, 4", close: 30}, {date: "2005, 10, 5",
                         close: 50}, {date: "2005, 11, 6", close: 43}]);
               private var d:Date=new Date("7/31/2005");
               [Bindable]
               private var offDays:Array=[d];
               public function myParseFunction(s:String):Date
                    // Get an array of Strings from the comma-separated String passed in.
                    var a:Array=s.split(",");
                    // Create the new Date object. Subtract one from
                    // the month property because months are zero-based in
                    // the Date constructor.
                    var newDate:Date=new Date(a[0], a[1] - 1, a[2]);
                    return newDate;
          ]]>
     </mx:Script>
     <mx:Panel title="DateTimeAxis Example"
                 height="100%"
                 width="100%">
          <mx:LineChart id="mychart"
                           height="100%"
                           width="100%"
                           paddingRight="5"
                           paddingLeft="5"
                           showDataTips="true"
                           dataProvider="{stockDataAC}">
               <mx:horizontalAxis>
                    <mx:DateTimeAxis dataUnits="days"
                                         parseFunction="myParseFunction"
                                         disabledRanges="{offDays}"
                                         labelUnits="months"/>
               </mx:horizontalAxis>
               <mx:verticalAxis>
                    <mx:LinearAxis baseAtZero="false"/>
               </mx:verticalAxis>
               <mx:series>
                    <mx:LineSeries yField="close"
                                      xField="date"
                                      displayName="AAPL"/>
               </mx:series>
          </mx:LineChart>
     </mx:Panel>
</mx:Application>

I found your posted code to be messed up. I fixed it and could not see your problem.
Here is the fixed code.
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
     <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               [Bindable]
               public var stockDataAC:ArrayCollection=new ArrayCollection([
                 {date: "2005, 6, 1", close: 30},
                 {date: "2005, 7, 31", close: 25},
                 {date: "2005, 8, 3", close: 40},
                 {date: "2005, 9, 4", close: 30},
                 {date: "2005, 10, 5", close: 50},
                 {date: "2005, 11, 6", close: 43}]);
               private var d:Date=new Date(2005,8,31);
               [Bindable]
               private var offDays:Array=[d];
               public function myParseFunction(s:String):Date
                    // Get an array of Strings from the comma-separated String passed in.
                    var a:Array=s.split(",");
                    // Create the new Date object. Subtract one from
                    // the month property because months are zero-based in
                    // the Date constructor.
                    var newDate:Date=new Date(a[0], a[1] - 1, a[2]);
                    return newDate;
          ]]>
     </mx:Script>
     <mx:Panel title="DateTimeAxis Example"
                 height="100%"
                 width="100%">
          <mx:LineChart id="mychart"
                           height="100%"
                           width="100%"
                           paddingRight="5"
                           paddingLeft="5"
                           showDataTips="true"
                           dataProvider="{stockDataAC}">
               <mx:horizontalAxis>
                    <mx:DateTimeAxis dataUnits="days"
                                         parseFunction="myParseFunction"
                                         disabledRanges="{offDays}"
                                         labelUnits="months"/>
               </mx:horizontalAxis>
               <mx:verticalAxis>
                    <mx:LinearAxis baseAtZero="false"/>
               </mx:verticalAxis>
               <mx:series>
                    <mx:LineSeries yField="close"
                                      xField="date"
                                      displayName="AAPL"/>
               </mx:series>
          </mx:LineChart>
     </mx:Panel>
</mx:Application>
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

Scripts for changing the address of the user when they have been in the box for 6 months

Scripts for changing the address of the user when they have been in the box for 6 months
If users are in a folder for deactivated users and disabled users in Active Directory, and been there for 6 moths do: change email address in exchange to existing email address.old
Anyone have suggestions on how I can go about it?

What is this "box"? What is this "folder" you're asking about? You'll likely get a better answer if you use standard terminology.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Programming Logic required for pulling the records for past month /week

Hi All
I need help in the SQL programming logic.
Oracle Database Version: 10.2.0.3.0
Requirement
In a data warehouse environment, I need to programme for weekly and monthly automated batch jobs to insert the data from Data_tbl to Reporting_tbl for generating reports. Tables descriptions are given below.
Table1 - Data_tbl (Source table –this table gets updated everyday).
Record_dt     first_name     last_name
Table2 - Reporting_tbl_(Target table)
Cycle_dt     first_name     last_name
1. Monthly Report
In the SQL Query, I have where clause condition—
Where Record_dt >=’01-nov-08’ and record_dt<=’30-nov-08’
Using the above condition in development, I am pulling the data from source table for the past month data. This will be repeated every month and it should be automated.
i.e., if I run this report any time in dec 2008, it should pick records of dates from Nov 01st to Nov 30th 2008. if I run this report any time in Jan 2009, it should pick records of dates from Dec 01st to Dec 31st 2008.
Date Values should be assigned for past month. Value of Cycle_dt in target table should be end date of past month like 30-nov-2008, 31-dec-2008.
2. Weekly Report
In the SQL Query, I have where clause condition—
Where Record_dt >=’01-dec-08’ and record_dt<=’07-dec-08’
Here week start day is Monday and end day is Sunday.
If I run the report between Dec 08th to Dec 14th , it should pull records of dates from Dec 01st to Dec 07th 2008.
On Dec 15th, it should pick from Dec 08th to Dec 14th.
Value of Cycle_dt in target table should be end date of past week like 07-Dec-2008, 14-Dec-2008.
Please help me with the logics for both Monthly and Weekly reports.
Thanks

Hi,
For the monthly report, instead of
Where Record_dt >=’01-nov-08’ and record_dt<=’30-nov-08’say:
Where   Record_dt >= TRUNC (ADD_MONTHS (SYSDATE, -1), 'MM')
and     record_dt < TRUNC (SYSDATE, 'MM')SYSDATE is the current DATE.
TRUNC (SYSDATE, 'MM') is the beginning of the current month. (Notice the condition above is less than this date, not equal to it.)
ADD_MONTHS (STSDATE, -1) is a date exactly one month ago, therefore it is in the previous month.
For the weekly report, instead of:
Where Record_dt >=’01-dec-08’ and record_dt<=’07-dec-08’say
Where   Record_dt >= TRUNC (SYSDATE - 7, 'IW')
and     record_dt < TRUNC (SYSDATE, 'IW')TRUNC (dt, 'IW') is the beginning of the ISO week (Monday-Sunday) that contains dt. Again, notice the end condition is strictly less than the beginning of the current week.

Where can I find the history in Safari? It shows only 2 days while I have saved the history for 1 month.

Where can I find the history in Safari? It shows only 2 days while I have saved the history for 1 month.

Hello Barbara,
Thank you for the question. It sounds like you are only seeing the 2 most recent days of your web browsing history in Safari.
If you haven't tried this yet, I suggest going to History > Show All History when Safari is open to see if more sites come up. You can find this step and more information at the following link:
Safari 6 (OS X Mountain Lion): Revisit webpages
http://support.apple.com/kb/PH11850
Thank you for using Apple Support Communities.
Best,
Sheila M.

I will studying in the UK for the next year and want to know if an unlocked iPhone 4S with a new sim card purchased in the UK will work as opposed to getting a new phone?

I will studying in the UK for the next year and want to know if an unlocked iPhone 4S with a new sim card purchased in the UK will work as opposed to getting a new phone? There seem to be differeing opinions on this.

Iphone 4s only has one version so it should work world wide in any carrier..As long as it's and unlocked version ofcourse.

Moving to the UK for 6 months . . . Suggestions?

Hello -
My company is sending me to the UK for 6 months for business and I am trying to debate whether or not I should take my PowerBook. I know (but correct me if I am wrong) that I can take my PowerBook, buy the universal adapter and pretty much use it like I would here in the states.
My dilemma is that I was considering updgrading anyways, so if I was going to sell it now and then buy a new one when I got home what would be the best way to preserve all of my files, settings, etc?
I have an 80 GB HD, if I buy an external HD that is also 80 GB can I make an exact replica of my PowerBook, store the external for 6 months and then when I get home buy a new one, boot it up and transfer all of my files and settings to my new PowerBook or iBook?
Any suggestions would be great, thanks.

Thanks for the feedback, it is good to know that if I decide to take it I won't have any issues getting internet, etc.
The main point of my question hasn't been answered. If I don't take my PowerBook with me what is the best way to store my files and settings so when I buy a new PowerBook I can transfer everything over like I would if I was just buying a new one and doing it the next day? (If this is even possible)
If I buy an 80 GB External will it be enough room to create an exact copy of the 80GB HD in my PowerBook or should I buy a larger external to ensure enough room?

Can individuals (students) purchase Adobe CC (one application or all) for just a portion of the year (i.e. a semester - 1 to 4 month span)? My students would like to purchase the program for a month at a time without making a yearly commitment.

Can individuals (students) purchase Adobe CC (one application or all) for just a portion of the year (i.e. a semester - 1 to 4 month span)? My students would like to purchase the program for a month at a time without making a yearly commitment.

Sure they can, just not for a student discount.
Mylenium

My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct.I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

My IPad screen is frozen with a message stating that the IPad has not been backed up to the ICloud for 7 weeks, this is not correct. I cannot get the messageto clear and cannot access any of the other icons; is there an emergency reboot process?

Have you tried resetting your iPad?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.

I bought the CC for a month it was $9.99 I downloaded CC but now what apps can I get is it lightroom and Photoshop?

I bought the CC for a month it was $9.99 I downloaded CC but now what apps can I get is it lightroom and Photoshop?

That is the photography plan, if you want more programs you need the full CC plan.

Generate all the dates for given month

Hi all,
How can I generate all the dates for given month? For example If I give Feb-2008 then it should display all the dates from 01/02/2008 to 29/02/2007
Thanks,
Sujnan

This question was expanded (and answered) at
Monthly Report
You can also search for "all days in month".

I deleted a message from iCloud mail. It says it is saved on the server for 1 month. Can I get to it?

I deleted a message from my iCloud mail (and emptied the trash) on my MAC that I didn't mean to. In my iCloud IMAP settings it says that deleted mail will be saved on the server for 1 month. How do I get to it?

Go to http://www.icloud.com and go to the Mail page there. Open the Trash mailbox. If the message is there you can move it out. If it isn't, then I'm afraid it's gone. The 'delete after x days' setting in the Mail application is over-ridden by the automatic deletion in the iCloud server - I have an idea that's 7 days but I'm not sure.

Getting the data for last month of every year

Hi,
How to declare the date if we want to pull the data from the December of every year.
For example if the query is run in march 2015 and they want the historical data it should pull only the data from dec 2014.
In the same way if they ran the query in future jun 2016 and if they want to historical data it should pull only data from dec 2015.
It should not coded manually. Please help me with date format that need to used.
BALUSUSRIHARSHA

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
A table has to have a key to be table. Here is my guess at a repair job:
CREATE TABLE Test_Data
(pu_id INTEGER NOT NULL
REFERENCES PU(pu_id),
pu_date DATE DEFAULT CURRENT_TIMESTAMP NOT NULL,
PRIMARY KEY (pu_id, pu_date),
x_count INTEGER,
y_count INTEGER);
Identifiers are not numeric in a good schema. What math do you do with them? They are also the key in the table that models the entity they identify. Where is the PU table (and what is a PU anyway)?
INSERT INTO Test_Data
VALUES
(28, '2014-01-01', 10, 20), -- crap! No key in this mess!!
(28, '2015-01-01', 30, 20), --
(28, '2014-12-12', 10, 20),
(28, '2015-02-02', 10, 20);
A PIVOT is not a query and not even part of SQL. It is how Microsoft programmers who do not know RDBMS or have a report writer violate the tiered architecture of SQL. We also do not use XML mixed in SQL. It is a bitch to maintain, has poor performance and again
violates the tiered architecture principle.
A query is not sorted because it is a table. A file in COBOL can be sorted and that seems to be what you really want to write.
Old COBOL love the Sybase CONVERT() string function to avoid SQL temporal data.
We never use SELECT * in production code; Google it. Not only are you generating code, you are generation bad code.
Since SQL is a database language, we prefer to do look ups and not calculations. They can be optimized while temporal math messes up optimization. A useful idiom is a report period calendar that everyone uses so there is no way to get disagreements in the DML.
The report period table gives a name to a range of dates that is common to the entire enterprise.
CREATE TABLE Month_Periods
(month_name CHAR(10) NOT NULL PRIMARY KEY
CHECK (month_name LIKE <pattern>),
month_start_date DATE NOT NULL,
month_end_date DATE NOT NULL,
CONSTRAINT date_ordering
CHECK (month_start_date <= month_end_date),
etc);
These report periods can overlap or have gaps. I like the MySQL convention of using double zeroes for months and years, That is 'yyyy-mm-00' for a month within a year and 'yyyy-00-00' for the whole year. The advantages are that it will sort with the ISO-8601
data format required by Standard SQL and it is language independent. The pattern for validation is '[12][0-9][0-9][0-9]-00-00' and '[12][0-9][0-9][0-9]-[01][0-9]-00'
This will port and waste time calling string function row by row.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Studying in the UK for 4 months this fall

Similar Messages

Maybe you are looking for