Stuff not showing up in windows browsers

I put html on my webpage
[www.myspace.com/distortionbetweenlines]
in safari, but when my friends look at it on their windows browsers the scrollboxes show up only as a gray box. It shows up fine in safari though. I'm very confused. Can someone please help?

In looking at your page, it could be because you have chosen too light a font color and that Windows machines are blending the font and the box together. Try making the font a bit darker and have your friends check it out.

Similar Messages

IPod Touch will not show up in Windows XP after iTunes 10.2.1 update

After updating iTunes to 10.2.1 my 4G Touch will not show up in Windows XP to charge or to sync. I have been reading this forum and following the multiple Apple help and troubleshooting steps with no luck. I can get Windows to recognize and charge the Touch as a camera but it will not update the driver for Apple Mobile Device. I have come to the conclusion it is an Apple software problem. Does anyone know where I can get the previous Apple Mobile Device driver for Windows XP? I would like to give that a try. It's really disappointing....

Upon uninstalling and re-installing all of the Apple software nothing has changed. I can see Apple Mobile Device Support in add/remove programs but when clicking on "repair" it cannot finish and says it encountered a fatal error and no changes have been made.
The error I get trying to install the driver in Device Manager says "I/O operation has been aborted because of either a thread exit or an application request".
Does anyone have any suggestions?

Ipod Touch not showing up it windows 7 or itunes

My Ipod Touch is not showing up in windows or itunes or even the ipod touch if you cloud help thank you so much
Thank you so mcuh

Have you double checked to make sure the Apple Mobile Device service is installed and running?
http://support.apple.com/kb/ts1567
Also see this article for more troubleshooting assistance.
http://support.apple.com/kb/TS1538
B-rock

I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

I tried to open a folder in my Documents. It does not show in any window but does show up when I am half way between windows. It did the same thing when I tried to empty the trash. It asked if that was what I wanted but I could't say yes because it was or

what is your question/issue here? did the folder have any content in it to begin with? screen shots of what you may be seeing?
if english isn't your native language, write it in what you are most comfortable speaking in to describe your issue.

7th gen iPod not showing up in Windows 8 anymore

7th gen iPod not showing up in Windows 8 anymore. Tried all the apple troubleshooting. Help?

I have tried all the 'Rs' that Apple recommend. As said, I can't hook up the iPod to my computer. I have tried to reset the iPod manually (holding the select and menu button) - but this doesn't work.
If there is another (manual) way to restore the iPod, I would love to hear about it.
As said: as for restoring the iPod - I can't get any contact with my iPod with my computer at all.

Essbase server is not showing in the windows services (11.1.2.1)

Hi All,
Essbase server is not showing in the windows services 11.1.2.1. when I checked the processes from task manager it is there.
Regards,

The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/

Mapped Drive B:\ to a network share but does not show up in Windows Explorer.

I mapped drive B: to a network share but it does not show up in Windows explorer. I can go to the drive by typing b:\ but is not visible in explorer. But if I login as local admin it shows up in windows explorer. Any suggestions?

Hi Lloyd Reeves,
Based on my research, I would like to suggest the following:
Disconnect the mapped drive and map it again.
Ensure the user is using an administrator account; or change another user account to have a try.
Create a shortcut for a share folder and see if it will disappear.
In addition, it would be helpful for future troubleshooting if you could help to collect the following information:
Which method did you use to map drive?
Was there any error message in the Event log? If so, please provide the detailed information.
For your information, please refer to this similar case:
http://social.technet.microsoft.com/Forums/windows/en-US/6acab187-c46c-4ff9-8604-196c64ea8995/mapped-drives-not-visible-in-explorer-although-shown-in-map-network-drive?forum=w7itpronetworking
Regards,
Lany Zhang

Downloads are not showing up in window. Can someone help? Thank you.

Just recently, downloads are not appearing in the Download window.
Under "Tools/Options"...
"Show the Downloads window..." is checked.
"Save files to" ( C:\Downloads ) is checked.

Check a setting: ''Firefox button > Options > Options (or Tools > Options) > Privacy, '''check''' "Remember download history"''
*See --> https://support.mozilla.org/en-US/kb/Options%20window%20-%20Privacy%20panel
I you want to keep download history, do not clear in when using Clear Recent History or when automatically clearing history when Firefox closes
*See --> https://support.mozilla.org/en-US/kb/Clear%20Recent%20History
*If you use a cleaner application, like CCleaner, check your settings (CCleaner has an option to clear Download History).
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Consider upgrading Firefox to the current version 10.0.1. Your version is 8.0.
*See --> https://support.mozilla.org/en-US/kb/Updating%20Firefox
You can get the incremental update by doing the following in Firefox: Help > About Firefox > Check for updates
You can download the full installer, SAVE it to your desktop, exit Firefox (Firefox button > Exit or File > Exit), then click/double-click the installer you just downloaded to update the version installed on your hard drive. This assumes that you only have one version installed in the default location on your hard drive and have not performed a "Custom" installation to another location on your hard drive.
*Full installer: https://www.mozilla.org/en-US/firefox/all.html
*Also see --> http://support.mozilla.org/en-US/kb/Installing+Firefox
*Also see --> https://support.mozilla.org/en-US/kb/Updating%20Firefox
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*'''''Adobe PDF Plug-In For Firefox and Netscape''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Ipod does not show up in Windows or Itunes! tried everything!

Here is the problem:
This is a new problem. Ipod worked fine on this computer until recently.
Ipod 5th gen does not show up in My Computer or Itunes.
It seems that it happend after I installed the latest update to Itunes.
What is happening:
When Ipod is plugged into my USB (the same one I always used before) it never shows up in my computer or itunes and always says "Do Not Disconnect" never stops!
What have I tried:
I plugged it into my friends laptop! It worked fine. Window found it.
I then used updater on it
I did the 5 r's over and over again. Nothing
I have reinstalled Itunes and tried that a few times
I tried different USB ports, nothing
I tried putting other items in my USBs and they work fine
IPOD just refusses to be seen on this computer again.
Any ideas? Thanks. This comp has my library and it is the one I use daily.

Thanks! But I actually figured it out! Right after I said something about the driver, I went into device mangager. Sure enough even though it did not show up as a drive letter the device manager said is was installed and working.
So I deleted the device out of device manager. Restarted and plugged it in. Although I go some weird error. It found the IPOD and now Itunes sees it.
I believe that killing the process would have done the same thing as you stated.
Thanks to all for taking the time to answer these issues. It beats the apple store or tech support.

I have a 4th generation iPod shuffle which does not show up in windows or iTunes. But my iPhone does any suggestions?

I have a 4th generation iPod shuffle which is not recognised in windows or iTunes when I connect to the computer , yet I have no problem when I connect my iPhone. I have installed the latest iTunes. Can anybody help me?

Thanks! But I actually figured it out! Right after I said something about the driver, I went into device mangager. Sure enough even though it did not show up as a drive letter the device manager said is was installed and working.
So I deleted the device out of device manager. Restarted and plugged it in. Although I go some weird error. It found the IPOD and now Itunes sees it.
I believe that killing the process would have done the same thing as you stated.
Thanks to all for taking the time to answer these issues. It beats the apple store or tech support.

Ipod classic not show up in windows or itunes

why my ipod classic not show in itunes or windows

iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
BTW, this is the iPod touch forum I requested your posted be moved to the iPod Classic forum

IPod not showing up in Windows explorer / iTunes - not responding to reset

I have updated my new (1 day old!!) iPod nano to the newest firmware (1.1.1.)... and now I can't use the iPod anymore.
It doesn't show up in Windows Explorer. When I try to connect to it via Run, it says: 'E:\ is not accessible. The file or directory is corrupted and unreadable'
When trying to open Windows Explorer, it freezes - not showing any harddrives.
When trying to connect to it via CMD (dos)... It reads: 'The file or directory is corrupted and unreadable'
I have tried all the soft resets, hard resets etcetera. I have uninstalled the USB driver for iPod, uninstalled iTunes, reinstalled them both, used different USB ports. But still no success.
I can't connect to it via iPod Updater, because Windows won't connect to it.
The iPod itself does respond, although I can't find any data on it anymore.
How do I get my iPod to work again: connect to my windows / iTunes player? Please, any help is appreciated!
iPod nano 4GB Windows XP

I have tried all the 'Rs' that Apple recommend. As said, I can't hook up the iPod to my computer. I have tried to reset the iPod manually (holding the select and menu button) - but this doesn't work.
If there is another (manual) way to restore the iPod, I would love to hear about it.
As said: as for restoring the iPod - I can't get any contact with my iPod with my computer at all.

How do I get to my bookmarks in my bookmarks toolbar that do not show because my window size does not allow them to show?

In the 3.x versions of Firefox there was an area after your last bookmark in the bookmark toolbar where you you could click and access all your bookmarks in the toolbar if the window size was not big enough to show them all.
Now in 4.o all that shows are the bookmarks in the toolbar that fit in the window size. So if I have my browser window set to 900 pixels I can only see the bookmarks in the toolbar that fit in that area and I have no way of getting access to the ones that are not showing unless I make my window bigger. But even then my window can only get so large because of my monitor size at which point I can not access any of the other sites in the bookmark toolbar.
Am I missing something or is there a glitch in the 4.0 version?

Hi
Thanks for the reply. Unfortunately there is no chevron sign after the last bookmark nor after the "Bookmarks" text that if clicked takes me to all my regular bookmarks and oddly does not even list my Bookmarks Toolbar folder. If I want to get into my bookmarks toolbar folder I have to the top menu and click "Bookmarks" next to the "History" link and then navigate to the Bookmarks Toolbar folder. Something odd is definitely going on and it's getting annoying.
Any suggestions welcome. I attached a screen shot so you can see.

Hard disk partition not showing up during window 7 install

STOP - 0x00000116 error . I
want to install fresh OS from usb stick but the hard disk partition is not showing up. Only USB stick is getting detected.
Please help .. I have an interview and I need to fix this issue asap.

Hi there,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that your hard drive is not showing up, presumably as a bootable partition. I am happy to help, but I need a bit more clarification of your problem. You mention a 0x00000116 error as well, which is normally part of a Blue Screen of Death. Does this happen regularly as well, or is that the real complaint, that you are getting the 0x code and a BLue Screen on startup?
That particular code is generally associated with a video driver problem.
Is the hard drive you are trying to install to, a new replacement hard drive or the original hard drive?
If you try to boot up the system, what error do you see?
Are there any repeating flashing LED patterns, or beeping patterns?
Assuming this is your original installed hard drive, did you try the recovery manager for the drive?
Performing an HP System Recovery (Windows 7)
Troubleshooting HP System Recovery Problems (Windows 7)
Let me know, so I can better target my help to your situation.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

DVD-ROM created in DVDSP does not show files in Windows

Hello,
I created a DVD-ROM in DVD Studio Pro 4 with the purpose of having a working DVD and also have additional files in that same disk. It all works fine in a Mac; I can watch the DVD, and I can also access the additional files (one .pdf and one .mp4) from the Finder. The DVD also works fine in any DVD player.
However, when I put the disk on a Windows computer, I can only watch the DVD movie, but the additional files DO NOT appear in Windows Explorer. If I open the dvd drive on a Windows computer, there's only the AUDIO_TS and VIDEO_TS folders, and nothing else.
Does anybody have an idea of what's going on here? PLEASE HELP.
Thank you.

This is an m2v file playing on the windows machine. Of course I would have preferred to run with a mac, but the end display software does not run on a Mac.
Windows Media Player, using the commonly(?) installed Klite Codec Pack which includes and mpeg2 decoder, shows it as having a length of 6:38.
VLC will play it as well, but shows not timecode on a windows machine.
The whole movie is there and I can scrub until the end in WMP. In fact Windows Media Player will play it to the end. And as it hits the end, the timecode should show 10:00 minutes, but it does not, it shows 6:38. On a Mac it shows 10:00 minutes
The end movie is to play in software (Windows Samsung's Magic Info Pro) that loops when the end time code is reached. Which it thinks is 6:38. The only problem is that it loops at 6:38 of the original movie which is not the end of the movie.
Sounds like a relativistic spacetime problem.
Before I get slammed for asking Windows related questions -- I put this in the compressor forum to see if there was some compressor setting I was not enabling, or some tweak that I could do to make an m2v file windows friendly.

Stuff not showing up in windows browsers

Similar Messages

Maybe you are looking for