Stumped On How To Fix HFS+Partition Error!! Help!
WEll hello and i am having so much trouble with my mac software. My current setup is as follows.
-Windows XP Home Edition Installed As Base OS
-80GB Hard Drive Partitioned
-65GB Windows NTFS Partition
-15GB Mac Partition
-Intel Celeron Processor
-Multiboot Software Set Up As Well
Here's my problem. I made all the partitions correctly and installed the Mac software onto my pc with already had Windows XP installed on it. The install went smoothly and the disk was mounted and formatted correctly. But after the install of the Mac OS I restart my pc and boot into Mac. Immediatly a message comes up saying HFS+ Partition Error. I have tried tons of things to fix it but everywhere I go it tells you have to fix erros related to intalling Windows onto a Mac. But luckily my Windows Xp still boots up fine. Someone out please help me!!
Great appreciation if ya do
Toshiba Satellite Laptop Mac OS X (10.3.2) Windows Based PC, Intel Celeron Processor
Hi Steel Raptor;
What you are trying to do is illegal. Asking for help here is not a good thing since this forum is an Apple sponsored site.
Allan
Similar Messages
-
I try to download a mobie or tv series on the latest itunes and it says that an error "-45054" occurred and i don't know either what this is or how to fix it. Someone help me please!!!
MacBook Airs won't run Classic.
iTunes errors may best be isolated by one of the iTunes forums below:
https://discussions.apple.com/docs/DOC-2463 -
Do anybody know how to fix an unknown error
Do anyone know how to fix an unknown error #1439 on ipod classc?
Why the option import cd is gone now if you Itunes 10.5?Hello there, please verify that you are using the latest version of iTunes.
Try these steps
Step 1. Connect a Ethernet cable to your macbook no wifi.
Step 2. Open iTunes
Step 3.Plug in your iPhone to your macbook
Step 4. Put the device into DFU mode.
DFU MODE STEPS
Hold the Power Button (3 secs)
Continue holding the power button and also hold the home button (15 secs)
Release the power button while continuing to hold the home button (10 secs)
You Should have black screen with nothing on the screen if done correctly.
Step 5: iTunes will either prompt to restore and update click restore and update
Just sit back and wait until you see the setup screen on your iphone if you still see error 53 is a hardware problem and needs to be replace by Apple. -
How to fix 1604 &1603 error ipod touch 4g
hi plz help me....how to fix 1604 & 1603 error.....ipod touch 4g ios 6.1.3
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
How to fix No Service error for my iPhone, which is recently factory unlocked from US and using it in India
Did you actually buy a factory unlocked and contract free iPhone from the U.S.?
The way you put it, it implies that someone has actually done "factory unlocking" on your iPhone, which is not possible. Factory unlocked iPhone is sold on Apple online stores in the U.S.
** One should not receive "No service error" on factory unlocked iPhone, unless the SIM is faulty; unsupported carrier or it's a locked phone to a specific carrier. -
Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)?
Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)? What's this error about? I searched and couldn't find it on the support page. This is extremely annoying.
Hello, I just solved my "Error 5200" problem by following these instructions to repair the permissions of the iTunes Music Folder:
http://docs.info.apple.com/article.html?artnum=93069
I hope this helps other people! -
HT4623 how to fix the itune error an unknown erroe occured (310)
how to fix the itune error an unknown erroe occured (310)
https://discussions.apple.com/message/24177027#24177027
Can't connect to the iTunes Store -
How to fix the E225 error on the MF 4380 dn printer
How to fix the E225 error on the MF 4380 dn printer
Hi okekeP,
The imageCLASS MF4380dn was not released by Canon USA in the United States, but was distributed in other markets such as Canada, Europe and Australia. I would recommend to referring to the Canon support group for your geographical area to ensure the proper support application is being used for your product. However. I will be happy to offer some assistance.
The closest US model would be the imageCLASS MF4370dn. The recommendation when the error occurs with this model is to perform a reset the product. If you have not done so already, please attempt to reset your laser printer as outlined below:
1. Disconnect the power cord attached to your machine while "on" for up to 10 minutes.
2. Reconnect the power cord for the unit and plug it into a different known working outlet direct to the wall (not a surge/power strip) to ensure it is receiving full power.
4. Once your unit has initialized, confirm an error is not displayed in the LCD.
If unresolved, please refer to your Canon support contacts for further assistance and whether a firmware update may be available to address the issue or if service may be required.
In case helpful to you, here are direct links to the product page for your laser product:
- if your product was purchased in Canada, you can visit the product page for your laser device on the Canon-Canada website, www.canon.ca.
- if your product was purchased in Australia, you can visit the Canon-Australia website, www.canon.au.
- if purchased in Europe, you can visit the Canon-Europa website, www.canon-europe.com
I hope this is helpful to you.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
I can't forcequit firefox and shutdown my computer, nor can I open up any other programs or applications. Does anyone know how to fix this? please help this poor soul.
You can force quit applications
>Force quit
if that does not work you can force quit a computer shut down by hold the power button for an extended period. -
After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)
I have exactly the same problem. I too have tried everything that's been suggested, but still not working. Don't really what to do next? I have an iPhone 4S.
-
My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .
T
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.
If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
Let me know!
xeni -
Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox -
HT1766 latest backup incomplete? womdering how to fix this? any help
Latest backup incomplete? wondering how to fix if anybody can help?
the phone is lost so we can't do another backup what is the solution???
-
Hi,
I'm using qm 8.5.2 (endpoint recording) most of customer PCs cannot play recording file in application.
When I launch application and try to play recoding file, it is stuck and show error message "PYLR2000 error playing a file. Try again or contact your Monitoring and Recording administrator." I've install all cilent requirements (validate pc is pass). The error still occur. Even though all requirements are complete .
So, How to fix this problem.
Thank in advance
NamkhaoHi bsetexast,
I'm fix this problem by using Java(TM) version 6.0.200.2 that can be download from UCCX when first run CSD (supervisor desktop). Even other higher java version is valid but this problem still occur. If you install higher version, you should uninstall it first and install this version as well.
If you cannot find them, I will send you via email.
Maybe you are looking for
-
I cannot open numbers. When I click to open the message says that, I need to update. When I go to updates is says I am updated. I keep going around and circles. Can anyone help?
-
How to get the key in the ini file?
I want to know how can i read all keys in the section of an ini file for e.g xx.ini will like this: [section] key1=value1111 key2=value2222 I want to get "key1","key2".
-
VBA Outlook Email Failing: "Outlook does not recognize one or more names"
I use VBA code to send emails from within Microsoft Project 2010 Standard to notify task owners of task status. This code has been working fine until the last couple of weeks. Now I get the error "Outlook does not recognize one or more names". The
-
very urgent please. some one make account on skype which is not belong to me , and put my mobile number and many people call me pleassse help me and till me how to hide my mobile number from this account which is not mine please help its avery urgent
-
Hi Experts, a questions concerning next page of first page in smartform?
Hi Experts, I have a smartform layout and it has only first page, can I make the next page empty for the first page? I want to print one page. Kind regards Dawson