Stumped. Pan Tool Doesnt work from Audio File

What the heck? I'm teaching a course on Audio Editing, and discovered **WHILE TEACHING** that the pan tool doesn't work from within an Audio File. Not that it's a particularly practical place to use it, but it was just when I was showing the students what an envelope is, and they were extremely confused!
When editing a single audio file, if you click the "Master Envelope" button on the bottom left, it brings up VOLUME and PAN. Volume works normally, but pan doesnt work at all There has to be a good reason for this, though I can't think of one.
www.alexdavismusic.com/2.png
Anybody?
Thanks,
Alex

amdrecording wrote:Not that it's a particularly practical place to use it
You're right it doesn't work from there.
If you think it's needed, please file a [bug report|http://www.apple.com/feedback/soundtrackpro.html]

Similar Messages

Unexpected problem: uncaught exception when working with audio files in Soundtrack Pro

Hey,
Whenever I double click an audio file in the timeline to work on it, I end up getting the Error message: "Unexpected problem: uncaught exception" and Soundtrack Pro eventually crashes. Also, this happens when I try to work with audio files in the file editor. I have Leopard and am using Logic Studio 8. Any insight would be much appreciated. Thanks
Matt

Didnt know how to remove the original clip from the STP arrange window - or whatever it's called in STPro. So I could go no further in my perverse science experiment.
It also appeared that I could only import an aif but not a wav?
I gave up on STPro and did what I needed to do in Logic, which I use regularly.
Thank you for folowing up on this.
PS. I used to use an old PowerPC version (1.0.3) of STPro and loved the way it visually showed the change in the waveform when you added each efffect. It appears that the new version (3.0.1) does not allow you to do this anymore? You can render or flatten the effects to see the final waveform, but then you are dead in the water and cant make changes?
Im such a newbie at STPro that I am probably not using it right?

Selection tool doesnt work in illustrator cc 2014

selection tool doesnt work in illustrator cc 2014.

Hi officeisbig,
While we are working on a solution, if you can upgrade os to 10.9, the issue should get fixed.
Sanjay.

My password on the itunes store doesnt work from my phone

My password on the app store and itunes store doesnt work from my phone but works on my computer. What am i doing wrong or what can i try differently?

make shure that you have the same user name on your phone and on the computer

Automating creation of MobileMe Gallery from audio files in iTunes

Hi
I am wanting to create a MobileMe Gallery of a few songs in my iTunes library. The only option to do this is to wrap MP3 files in a .mov container as MobileMe gallery doesn't support audio files. I have worked out all the necessary steps to do this and would now like to automate the process. Here is the sequence I follow manually:
1. Select tracks in iTunes
2. Convert these Apple Lossless files to MP3
3. Add MP3 files to playlist
4. For each track in playlist:
5. Convert album image (.jpg) in album folder to max 640 width (so movies will play on iPhone)
6. Open resulting image in Quicktime Pro
7. Open Audio File in Quicktime Pro
8. Copy Image and Paste into Audio File in Quicktime Pro
9. Share File to Email using Quicktime Pro (this is the best way I've found of creating a small .mov file which just creates a container the same size as the image file and the audio file - presumably there's a way of exporting in the same way)
10. Drag .mov file created from Email created to MobileMe Gallery in iPhoto.
11. Repeat for each track
So I am looking for a way of automating this as much as possible, and wondering if applescript or automator would be the best way to go.
Ideally I would also like the script/automation to be able to create a .mov file slideshow of all images in the album folder (sometimes there is more than one image there), dividing the number of images by the length of the track (perhaps using the 'Add to selection and scale' feature in Quicktime Pro).
Finally one issue I am experiencing - converting the image file to max width 640 does allow the movie file to be played in the MobileMe Gallery from an iPhone, but the file that opens in the Movie Player on the iPhone doesn't show the image(s) in the .mov file, it just plays the audio. I wonder why this is happening?
Any advice on any of this would be much appreciated!
Thanks
Nick

Hi
I am wanting to create a MobileMe Gallery of a few songs in my iTunes library. The only option to do this is to wrap MP3 files in a .mov container as MobileMe gallery doesn't support audio files. I have worked out all the necessary steps to do this and would now like to automate the process. Here is the sequence I follow manually:
1. Select tracks in iTunes
2. Convert these Apple Lossless files to MP3
3. Add MP3 files to playlist
4. For each track in playlist:
5. Convert album image (.jpg) in album folder to max 640 width (so movies will play on iPhone)
6. Open resulting image in Quicktime Pro
7. Open Audio File in Quicktime Pro
8. Copy Image and Paste into Audio File in Quicktime Pro
9. Share File to Email using Quicktime Pro (this is the best way I've found of creating a small .mov file which just creates a container the same size as the image file and the audio file - presumably there's a way of exporting in the same way)
10. Drag .mov file created from Email created to MobileMe Gallery in iPhoto.
11. Repeat for each track
So I am looking for a way of automating this as much as possible, and wondering if applescript or automator would be the best way to go.
Ideally I would also like the script/automation to be able to create a .mov file slideshow of all images in the album folder (sometimes there is more than one image there), dividing the number of images by the length of the track (perhaps using the 'Add to selection and scale' feature in Quicktime Pro).
Finally one issue I am experiencing - converting the image file to max width 640 does allow the movie file to be played in the MobileMe Gallery from an iPhone, but the file that opens in the Movie Player on the iPhone doesn't show the image(s) in the .mov file, it just plays the audio. I wonder why this is happening?
Any advice on any of this would be much appreciated!
Thanks
Nick

Working from Logic files on old Time Machine back up

Hi there.
Apologies if this is a bit a newbie question, I'm not new to apple, but new to using Time Machine in these circumstances.
This is my issue. I have a 2.0ghz Dual core 500GB hd iMac in my semi pro music studio. I back up to a 1TB hd using Time Machine. The iMac was beginning to get very slow I guessed because it was 470 gb full, so I made sure the back up was completed, then I did a complete fresh install of Snow Leopard (up from Leopard).
All good so far.
Now, everything back up and running, reinstalled Logic Studio, all plug ins etc etc, but I wanted to keep the computer fairly clear of files etc, so I was hoping to be able to work from the timemachine files. Now I guess I shouldn't use the same external hd with time machine now because it will start backing up the new almost empty Snow Leopard version. But here's the issue. I open a Logic Session from the back up and it all works, plays, I can make edits to the midi, audio, but as soon as I want to save I get a series of spool and permissions error messages. It seems to work if I save the file to my desktop and work from there though. But then I don't have this saved on an HD...
Does any one have any suggestions here?
Would it work if I bought a new hd, plugged them both into a USB hub, imported tracks I want to use from the old hd and time back up using time machine to a new hd?
To add another spin to the issue, I am also using a 15" i7 Quad MacBookPro. I want to use this in place of the iMac however I already have a USB input shortage (3 on my iMac version) and use a 2nd monitor. My macbook has the thunderbolt port... Does anyone know of any hubs using Thuderbolt?

Lloyd Elis wrote:
How do i delete & reformat my time machine external back up drive & start reusing it again as a time machine back up facility??
Welcome to Leopard Forums:
If you repartition your drive it's quick and works fine.
Using disk utility, create two partitions on the drive and then repartition into a single partition.
When creating two partitions, be sure to overrun the existing data. You should get a warning about losing all data, which is what you want.
Leave everything else alone.
Message was edited by: nerowolfe

Windows Explorer Preview pane does not work with .docx files

This question follows on from previously unresolved questions posted on this forum (see http://social.technet.microsoft.com/Forums/en-US/aec7b30a-0709-4d54-b5c7-570dc5b115df/preview-pane-and-windows-explorer?forum=officeitproprevious) and another forum I
have visited.
The problem:
In windows explorer scrolling down (using mouse or arrow keys) in the library pane from one file to the next stops at a word document with more than 2 pages. Instead of continuing to scroll through the file list in the library pane it switches to scrolling
through the pages of the document in the preview pane. This is a major pain because it impedes being able to move quickly through the files within a folder.
The logical way this should work is to always scroll within the library pane unless you click in the preview pane to scroll through the document preview. This isn't how it is working.
I am using Windows 7 with Microsoft Office 2010.
Can someone please provide give me a solution.
http://social.technet.microsoft.com/Forums/en-US/aec7b30a-0709-4d54-b5c7-570dc5b115df/preview-pane-and-windows-explorer?forum=officeitproprevious

Hi,
I did a test on my machine, couldn't reproduce this issue.
There doesn't seem to be any settings on Office to change that; anyway, please try repairing Office in Control Panel to try again.
Since it may be an issue more related to Windows Client, I suggest you post this question in Windows Client forum:
http://social.technet.microsoft.com/Forums/windows/en-us/home?category=w7itpro
Regards,
Melon Chen
TechNet Community Support

Select/transform tool changes to pan tool when working with text

I have had this problem since Motion 2, and version 3 is no different. Whenever I work with text in Motion, at some point while moving the text in the canvas, the select/transform tool will suddenly change into the Pan tool, and it won't let me do anything else but pan things. I have to close and reopen Motion to correct this. It happens VERY OFTEN, every time I work with text...it get's really annoying haveing to conatantly quit and reopen the program. I lose a lot of time doing that. Has anyone else had this problem? I also have a Powermac G5 that has the same problem so I know it's not the Mac Pro. Any suggestions?

Sounds familiar.
I searched and saw a couple posts from Patrick that suggested,
"This seems to happen after adjusting text. Simply click on the canvas and press space. The project won't play and the hand will turn into your selected tool."
see:
http://discussions.apple.com/thread.jspa?messageID=2249852&#2249852
http://discussions.apple.com/thread.jspa?messageID=4299262&#4299262

Going from "Audio File" to "Multi-track" Editing in Soundtrack

Howdy!
In Final Cut I've exported multiple clips via right click and "Send to STP as Audio File Project."
Now, I've realized I am doing it all horribly wrong, and I would like to export my entire sequence again as a multi-track project!
Great, but now I have to ask myself, "What about the clips I've already EQed and used the noise cancellation tool on? Do I leave them as they are and just expect for them to go back to their original state? Or should I delete the files that STP made?" When I right click a clip this is the file type that STP made, that FCP links to, "292_1336_03.MOV (sent).stap"
Can I delete that file and about 7 others to make my audio return to it's normal state? Or is there a couple other steps I should do before ruining my life?
Thanks a bunch,
JS

I'd start with a Send to STP Multiclip project. You'll probably have to isolate the clips you already modified individually, only so you don't lay another track-based effect on top of an existing clip-based effect. Then just listen and see what you've got. If it's not going to work for you, well, chalk that up to a "learning moment," or "experiment." I have plenty of those sitting around here. Once you get a handle on the STP workflow it's much faster overall for dealing with an entire project (not so good for single clips).

How to remove image files from audio files

i dont understand enough about how itunes worked...So my problem is, when i would add album art to a song, i would copy and past to the artwork box on the song. When i would find a better image, i would just past over the last one, not realizing that it was actually adding another image. This form of Copy/past(as i understand) saves the image to the audio file. *My question:* how do i remove the image files from the audio files...?

Right click on the file you want to remove the artwork from, choose Get Info then the Artwork tab, click on the image and press the delete button then OK. To remove from multiple items, highlight the adjacent tracks in your selection (click on the first in the list, hold down the shift key and click on the last), right click and choose Get Info, choose yes when you are asked if you want to edit multiple items, tick the box beside the small empty artwork window about halfway down on the right. (if the songs aren't adjacent to each other but spread through out the playlist or library CTRL & Click on each of the songs you want to highlight)

Scrollbar doesnt work from time to time

Hi I have windows 8 and from time to time the scoll bar doesnt work.
I move the mouse weell up and down and the screen doesnt scroll it just shakes up and down ,this is in all browsers and even on programs scroll bars, like you can see on this videos link i took of me mooving the mouse weel up and down:

Hi,
Generally speaking, this problem can be caused by Graphic driver problem. please check and upgrade Graphic driver to be latest for test. In addition, please check Event Viewer if it identify the problem.
If problem persists, you can visit the following Web site to download and install the latest IntelliPoint software:
http://www.microsoft.com/hardware/en-us/downloads
Also check and reinstall mouse driver for test in Device Manager, In addition, please check is there any conflicting mouse software.
Roger Lu
TechNet Community Support

Read Out Loud doesnt work from IE

In Acrobat reader 7.0.x, The Read Out Loud feature could be easily accessed from an opened PDF document inside Internet Explorer using the Shortcuts Shift-Ctrl-Y and Shift-Ctrl-V. However with version 8 and above this doesnt seem to work anymore. Is there any key combinations that needs to be used ?
Unless it is a bug what could be the reason that a good functionality that was present in older versions is disabled in newer ones ?
Thanks,
Chait

That depends.
First, be sure the pdf isn't just scanned images. Can you select individual words with the select tool? If not, you would need to use a tool to run OCR before it can be read.

Connection doesnt work from remote computer

Hi
I have Oracle XE installed on a computer and my application (Excel application, VBA code) is working well with oracle xe.
i want to run the application from a remote computer.
I opened my application on a rempote computer and it could not connect to oracle xe..
I installed the Oracle XE client on the remote computer but still the application cant connect to the oracle server from the remote computer.
this is my connection string:
sCon = "Provider=MSDAORA;Data Source=xe;User Id=myUser;Password=myPw;"
the computer on which oracle xe express is located is called "Hagar1".
how can i connect to the oracle from the remote application?
thanks,
Hagar
Edited by: user641508 on 04-Dec-2008 10:26
Edited by: user641508 on 04-Dec-2008 10:27

the remote client doesn't know how to get to hagar1, simplest fix is add the entry to the tnsnames.ora file, run a tnsping hagar1 to find the location of the client oracle_home/network/admin/tnsnames.ora file and add:
hagar1 =
   (DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = xe_hostIP_or_name )(PORT = 1521))
    (CONNECT_DATA =
      (SID = XE)
)Edited by: clcarter on Dec 6, 2008 10:53 AM add code tag

Adapter Engine test tool doesnt work

Hello
I try to send a message from runtimeworkbench
I chose Component Monitoring -> Integration server -> Adapter Engine
And I put the paramets of the message ( message interface,namespace..etc.)
then I put user and password
and the url is
http://server_name:52000/MessagingSystem/receive/AFW/XI
I click on send,I get a message "Messasge sent"
but the message doesnt appear on sxmb_moni
any idea how to solve it?
thx
Shai

Hi,
As you state, check the user you're sending the message has necessary authorizations. You probably got an HTTP error 403: unauthorized. For overview of http errors, you can refer here:
Try with user PISUPER for example. If you get past the authorization, the message should get to the IE.
Post any other problems if arised.
Regards,
Gökhan

Audigy ZS mic doesnt work from case port but does from card po

first off i have connected the ground L and R input and mic into the pins on the card.im still questioning if the mic pot is in right tho. but the audio works.
ok when i connect my mic to the case mic port i dont get anything but i do get it when i connect it directly into the card.
can some one help me?
the the mic pin is connected to pin 6 do i need to connect anything else like mic bias? what ever that is.

i have everything connencted in the following pins
-ground
2-L output
4-R output
6-Mic
8-(iono what to ut here) mic bias
am i missing something?

Stumped. Pan Tool Doesnt work from Audio File

Similar Messages

Maybe you are looking for