Stumped with lines

http://prosol1.com/fireworks/temp201.html
hi - i put this together as a design template. please only look at it in IE because there are some joining breaks in there in FF.
anyway - no links or buttons work - i'm just working on design and they also wanted to see the SWF in action too.
so when i cut the design up in PS4 then exported, i simply when into DW4, deleted the rectangle box with the SWF. it worked EXCEPT for that thin vertical and horizontal lines that are underneath the SWF. i can't figure out how to get rid of them. they're not in the SWF file.
any ideas? here is CSS if that will help too.
http://prosol1.com/fireworks/temp02.css
thanks - mike deaf guy

hi gary,
that didn't work. here it is posted:
http://prosol1.com/fireworks/temp201.html
also, you may want to look at this page in FF and IE. in FF, the split images where they join together at the top is more pronounced. maybe that will help you figure out the problem? i'm at wits end. i could tell my co-workers that this is a temporary thing during the design process, but being deaf - and they hearing - the respect level of my work is practically nil [neither one of them have ever designed anything professionally in their lives, yet they've been getting up moving things around nilly willy without even asking for my design opinion].
thanks - mike

Similar Messages

MBP hangs after login screen with Circle with line through it

Recently, my MBP (Model A1278, MB990LL/A) started doing the "folder with blinking question mark" at start up as if it couldn't find the startup disk.
I held Option at startup and chose the Macintosh HD that it found. After selecting, it brings me to my username/login. I type in the PW and hit enter and the screen turns gray and I see the Apple logo in the middle with spinning gear below it. (All good so far, as this sequence is the same sequence as my other MBP). After about 1min of gear spinning though, the Apple logo changes to a Circle with a line through it. It never logs in and I never see the desktop.
Troubleshooting I've done:
1. Pulled out the HDD, plugged it up to my OTHER MBP and ran Disk Utility on the whole drive. Found no errors.
2. Put the HDD in question in my OTHER MBP and booted into my user account just fine. All the way to Desktop, no problems.
3. Took my WORKING HDD from my OTHER MBP and put it in the MBP in question and tried to boot, did the same thing. Circle with line after logging in.
4. Tried to run Apple Hardware Test from boot cd by holding D but nothing happens. Just gray screen to infinity.
5. Replaced the trackpad from my OTHER MBP just for fun
Any ideas? I'm usually pretty good at this stuff, but this one has me stumped.
Thank you!!!

No luck. I can't do a Safe Reboot, nor can I reset the NVRAM/PRAM. When I power on either 1 of 2 things happen. A) Nothing, grey screen until folder with flashing question mark or B) When it decides to, it finds my HDD and goes to login screen but after entering pw and hitting submit, I get the Apple logo for a minute then replaces with a Circle w/ Line.
Can't hold Shift at reboot, can't hold c to boot from DVD (have to hold Option and choose DVD), can't hold D and boot the Apple Hardware Test DVD.
Does anyone know of a way to reset the NVRAM/PRAM manually? Is there a CMOS battery like on a windows PC or something similar that I can remove to reset? Command+Option+P+R does not work, it reads that I've pressed Option and gives me the Startup Disk Manager screen to select a drive to boot from.
Thanks

Customer/Vendor A/C with line item details and with opening and closing Bal

Dear Sir / Madam,
Is it possible to have a customer and / or vendor Sub-Ledger account-
with line item details and with opening and closing balance detail
for a particular period.?
Regards
Chirag Shah
I thank for the given below thread which has solved the same problem for G/L Account
Re: Report to get the ledger printout with opening balances

Hello Srinujalleda,
Thanks for your precious time.
I tried the referred T-Code
But this report is not showing Opening balance, closing balance detail.
It only gives transactions during the specified posting period and total of it.
Please guide me further in case if I need to give proper input at selection screen or elsewhere.
Client Requires Report in a fashion
Opening Balance as on Date
+ / - Transactions during the period
= Closing Balance as on date
As that of appearing for G/L Account by S_ALR_87012311
Thanks once again & Regards
Chirag Shah

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Problem with lines in Flash!!!

Hello, I am currently using flash cs5.5. I am not having any software malfunctions or anything like that, I am just having a prolem with lines. When drawing with the pen, (or even pencil tool), is there anyway to make the lines you draw one solid line when you're done? For example, if tracing with the pen tool, each time you put an anchor, it creates a different line, which is fine while you're drawing it. I'm wondering is there anyway to select a certain amount of lines and make them one solid line? Let's say I am drawing an ear with the pen tool; by the time i am done drawing it, it is made up of 3 seperate lines. I did not know if there was anyway to select those three lines and make them one solid line? I know that I can double-click, but I just want to select the ear, not the entire head, (which is what happened when I double-click).
Hopefully I got my question across, I'm not really sure how to describe it. Any help is greatly appreciated. Thank you so much!
~~~~~~~~~~~~~~~~~~~~~~~~~~
Also too, on a 100% different note, I am also running into a different problem with lines. When drawing with the pencil tool, everytime I trace something with curves or bumps, by the time I let off the tablet, (this is not a tablet problem), the line with be in 100 different segments, even though I drew the line with one solid motion. It seems to do it more when I am working within a symbol. I do not know if there is a fix for this or not, but again, any help is greatly appreciated.
Please do not get confused, both of these problems are 100% different from each other. The first is just something I am wondering if it exists. The second is more of a malfunction/glitch with the progam. Thanks again!

Not sure if I understood you completely but let me suggest you a couple of things.
1. Try drawing in Object mode. (available lower down in the tools panel. shortcut - J)
The entire shape you draw now without releasing your mouse button will be treated as one shape object. These can be selected independently, broken apart (Ctrl + B) and even combined (Modify Menu -> Combine Objects -> Union). You can perform all the normal shape editing tasks as well on shape objects directly.
2. For Pencil/brush tools, you can set the curve smoothness for your tools from the Properties panel -> Smoothness option.
If you already have a line or curve drawn on Stage with too much of segmentation, you can select it then goto bottom of the Tools panel and click on Smooth button multiple times till you get the desired smoothness.,
Hope this helps! Let me know in case of any doubts.
-Nipun

HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

Contact iTunes Store Support.

Work Order to cost center settlement with line item detail

Iu2019m having difficulty finding a method to settle from a work order to a cost center with line item detail. When an order is settled with KO88 or KO8G the total value for that work order/cost element combination is combined and posted to the cost center as a lump sum with the description of CTR\######. Users would like to see the individual values that posted to the work order in a cost center report such as KSB1.
I donu2019t see anything in the settlement rule, settlement profile or allocation structure that will allow line item settlement from work order to cost center. Is line item settlement possible when settling to a cost center? Is there an alternate way to see these expenses as line items in KSB1?
Thanks,
Jeff

Thanks Christian,
We've defined an allocation structure that we use for Project System and Work Order settlement and have Receiver Categories established as FXA, CTR and WBS with "by Cost Element" checked. Work order costs do settle to the cost center entered in the settlement rule, the problem is it combines all items values as a single amount when posting to the cost center.
For example:
expenses post to the work order under cost element 500000 for $500, $200, $300 and cost element 600000 for $250 and $250. The settlement rule says to settle to cost center 170000. When the settlement takes place cost center 170000 is debited $1000 to cost element 500000 and $500 to cost element 600000. We would prefer to see individual posting of $500, $200, $300 to 500000 and $250, $250 to 600000.
Thanks,
Jeff

Issues with lines across the screen, as well as freezing

Issues with lines across the screen, as well as freezing
Hello all
Got an iMac since January 2008 and I do like it a lot, even though it has some issues:
-- It displays (quite often) lines partially across the screen
-- Lines appear as well when opening applications or when menus come up
-- The system freezes more than I like to admit (more than my Windows/Ubuntu box)
I don't know if the freezing has to do with the lines that are shown on my screen. But I assume that both issues relate to some video card problem. I can't be sure - but that's what I assume from living with this issue day to day.
The line on the desktop (most of the time it is there before login) I can always get rid of by changing the display resolution to something else and then changing it back. Normally the line is gone, or, reappears on a different spot on the desktop. But repeating the procedure removes the line.
However, this does not mean that the lines are not showing up again when launching apps or displaying menus!
And since those lines appear to happen randomly, I think it's safe to assume that we're not talking dead pixels here, either...
About the freezing:
My iMac freezes sometimes when I move the mouse around, when switching desktops using "spaces" or when the zoom function of the Dock kicks in. Sometimes the screen goes completely black, sometimes completely white. The mouse, however, always works. But the system requires a reboot.
Again, this happens too often to feel comfy about it.
With my little knowledge of Mac troubleshooting I assume that there's something wrong with the ATI card that's built into my Mac. On the other hand, some people say that they started getting similar issues after updating their OS to Leopard. Again other people say that such issues stem from an ATI revision that is too old and the Mac should get a new ATI card. And how would that work? Isn't that an "all-in-one" machine with everything soldered onto the mainboard?
So, any help in this matter is greatly appreciated...
Cheers,
Rainer

Here are a few screen photos I've taken (not screenshots, as the lines are not visible when taking screenshots. I used my digicam to snap those...).
Here's the link to those screen photos displaying some of the many lines I keep having:
http://picasaweb.google.com/rainer.rohde/NewAlbum62508115AM
Needless to say, as I typed this message here, I had a nice line going across my Safari window..
Cheers,
Rainer

Why is my Macbook Pro suddenly and constantly shutting down/crashing on me and giving me a blacked out or blued out screen with lines? Seems like a total system failure is happening?

Macbook Pro- shortly after upgrading to free software upgrade to Mavericks- 10.9.5-
has suddenly been freezing up, but went more directly to 'shutting down,' CRASHING on its own. Most of the time, if I'm even able to successfully get the laptop turned back on, it only stays up/on for a few moments before repeating the failure. The failure is often accompanied with the monitor going 'blank,' or most typically either 'blacking out,' or going blue/green or grey screen with lines or grids all over the monitor. All Desktop visibility, functions or applications in process disappears. This has caused repetetive 'forced shut downs,' which I never usually do, unless prompted to because I have no choice like this.... Or as I said, the computer itself will just shut down and turn off by itself.... Can anyone tell me what this issue is, and I'm pretty sure other Mac users have seen this exact thing I'm describing happening on their laptops, with their systems or on their monitors. Someone please explain or point me in the right direction... as naturally my laptop just went out of warranty as well.... And I don't know if this means the entire system is basically corrupted, dying/dead... and or if it is a monitor issue, a hardware issue, software issue or if there is anything that can be done to restore, repair it, etc.? Also another thing I have noticed ever since getting this laptop- (few years old now...) is that it runs VERY HOT... has in fact burned my lap /skin many times... and seems like the fan or internal operating systems/functions are also perhaps not functioning properly. Can this also be causing the problem? Or is it a corruption or virus of some kind? etc. Thank you.

What you describe sounds like a hardware issue. Unfortunately, you'll need to get that checked out by Apple. If you have an Apple Store near you, make an appointment with the Genius Bar and take the machine in for evaluation.

One pr for multiple materials with line items while running mrp

Hi SAP gurus,
              I am config the system for MRP as per my client requerement.
                 We use CBP for different RAW materialsfor example they having a 10 materials for planning,were,
         MRP type is VB,
          LOT size is FX,with Different Reorder points and fix order quantity for all materials,
         My client whant run MRP for all these materials in single time that means they whant multiple item at single levels,
        i soles these requirement with the help of Product Group(sop) and its working but when we running md02 for product group all materials have planed and they give different purchase requistion numbers for all these materials but my client Wants single purchase requistion with line items for all these materials.
     Pls give me the solution for that requirement.
thanks and Regards,
abhi

this is not the way SAPs MRP run works.
Where is the benefit for this?
the requisitions are not even split into header and item table, it is just one table EBAN, and either way you would get exact the same number of records in EBAN.

HT203433 Hi! I am so stumped with having multiple apple ID accounts now when I try to do an update on my iPhoto app it tells me to log into the account I used to purchase that app. I have tried going into my other accounts. Please help.

Hi! I am so stumped with having multiple Apple ID accounts. I did this not knowing what I was doing and now I can not update my iPhoto app because it tells me to log into the account that I used to purchase it. I thought I was trying to do this but I can't get anywhere.
Please help!
Flora

Hi Florafromco,
You can view your iTunes Store account and request assistance by following the instructions below:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/ht2727
I hope this information helps ....
The following article will provide a little more information regarding using multiple Apple ID's:
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
I hope this information helps ....
Have a great day!
Have a great day!
- Judy

Photoshop cc layer appears to be locked when opened in photoshop elements. pencil with line crossing it out in layers panel... help please.

I sent a psd created in photoshop cc to a customer to edit. They only have photoshop elements and cant edit the layer.. the image shows a pencil with line across.
any ideas please???

You sent them a layer group and photoshop elements can't open or work with layer groups without some kind of add on like actions or scripts.
You should send them the document with the layers not in a layer group.

IPod screen is white with lines

HELP! HELP! anyone?
Hi guys i have a problem that i have never experienced before, here goes...i have a 30GB 5th generation iPod, i was playing music when i deceided to sync so music, When i connected it to the PC the screen just went *white with lines across the screen* as though the display was damaged. The lines were showing different colours because the logo "DO NOT DISCONNECT" was attempting to show.
I tried restarting & restoring my iPod but that didn't work, when i restarted it the screen was tring to display the "APPLE" Logo after it was booting up, the screen was dark as usual when u restart it but with lines across and when the main screen came up it was white with the lines. Now the next weird thing that happened was when i turned off the iPod and then turned it back on the screen was back to normal, when i turned it off and on again the problem returned, if i leave it off for about *1-2 minutes* and i turn it on its fine but when i turn it off & on the problem returns.
Besides the problem with the lines on the screen the ipod is working ok, can anyone please assist with with the huge problem? i don't know what to do...HELP ME!

Just experienced the same problem yesterday and left with two white lines across the screen and 1/3 from the top of the screen.

Ipod touch has a white screen with lines on it and wont power off and wont connect to my computer

My ipod has a white screen with line on it and wont turn off and wont connect to my computer . It wont reset or reboot with holding the on off button and home button either any help would be appreciated

http://support.apple.com/kb/TS3281
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Taking too much time for saving PO with line item more than 600

HI
We are trying to save PO with line items more than 600, but it is taking too much time to save. It is taking more than 1 hour to save the PO.
Kindly let me know is there any restriction for no. of line items in the PO. Pls guide
regards
Sanjay

Hi,
I suggest you to do a trace (tcode ST05) to identify the bottleneck.
You can know some reasons in Note 205005 - Performance composite note: Purchase order.
I hope this helps you
Regards
Eduardo

Stumped with lines

Similar Messages

Maybe you are looking for