Stupid BUG found

Problems with editing and compiling packages with CamelCase names, eg "AbCd".
try to create package
create or replace PACKAGE "aBcD" AS
END "aBcD";
Open it in Latest SQLDeveloper and press complie button. It will crear current window, and open new empty window for procedure ABCD.
You need to close both windwos and open pachage using object browser again. It makes code editing Impossible.
Same problem with functions and procedures editing.
SQLDeveloper 2 worked perfectly in such cases.

Hi
Thanks for the info.
Warm Regards
-Georgey

Similar Messages

Bug Found and Fix Found Creative ZEN XFI Style 32 Gig

9Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?Hello I was having problems getting my MP3 TAGS to show up on a number of my MP3's.
Whenever I loaded my files onto my ZEN it would show up as a Voice under Recordings.
And the file name would be "MIC and the date file created etc..."
I noticed that these files where all starting with the letters MIC at the front of the filename...
For instance: Michael_Jackson_Thriller.mp3?? or? Michael_W_Smith_Let_it_rain.mp3
and so on and so on... ANY file that started with the letters M I C? would be thrown in as a voice recorded file and the TAG would not operate.
I have the latest Firmware on my MP3 Player.
The fix was just to change the file name so it did not start with MIC... so i went and switched Michael Jackson to M.Jackson and also switched Michael W Smith to M W smith.
The tag showed up appropriately and I have had no problems since.
It would be nice if there was another Firmware update so that MP3's could start with the letters MIC also I was hoping to bring awareness to this situation for other users.

=Re: Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?I did three methods of?loading the files.
I used Windows Media Player to sync the files.
I used Creative Central to transfer the files.
These two methods produced results where the file starting with MIC turned into a voice recordings.
I also had problems just copying and pasting the files (using windows explorer).
I have not had any problems with any other file. I normally use MP3Tag to tag my files.
However i even tried using Windows Media to tag the file and I even tried using Creative Central to tag the files.
I tried as many work arounds as possible. But once i renamed the file it worked.

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly. When opening a DXF, CC merges multiple layers into one, even if you have the "Merge Layers" unchecked. Can a forum admin employee get this submitted as a bug report? Thanks.

Thank you Larry. I just submitted this bug report pasted below at the link you provided.
******BUG******
Illustrator CC 17.0.0 *always* merges layers when opening a DXF file, even if you have the "Merge Layers" unchecked.
1. Open a DXF file that contain multiple layers in Illustrator CC 17.0.0
2. Uncheck the "Merge Layers" button.
3. Click OK.
Results: It has merge all the layers into one layer.
Expected results: It should open with multiple layers preserved. Illustrator CS6 works properly.

[svn] 4223: Some fixes for bugs found running the TC acceptance tests:

Revision: 4223
Author: [email protected]
Date: 2008-12-03 11:35:03 -0800 (Wed, 03 Dec 2008)
Log Message:
Some fixes for bugs found running the TC acceptance tests:
- Empty try {} throwing NPE while emitting code.
- OP_Callproperty and OP_Callproplex may have a known type but default value.
- Better diagnostic message for CONSTANT_TypeName and preliminary plumbing for CONSTANT_TypeName support.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/adobe/abc/GlobalOptimizer.java

Re: SB Audigy Series Support Pack 2.5 (08/09/2009)? Important Installation Notes
If any drivers are already installed, you must follow these steps to ensure a proper installation of the new Support Pack.
) Open a Command Prompt window with Admin privileges (right click and select Run as Administrator).
Type the following commands:
takeown /f C:\Windows\*.cdf
cacls C:\Windows\*.cdf /G [color="#ff0000"]Administrators:F
Where [color="#ff0000"]Administrators may?be different if you are running a localized version of Windows or?you can simply use your login name.
2) Unpack the previous Support Pack or Creative official release.
3) Run \Drivers\Setup.exe and choose Driver Uninstallation, select Delete all shared Creative audio driver files. and click OK. Reboot when asked to do so.
4) Make sure the following files were deleted, otherwise delete them manually:
- For Windows 7 / Vista 32-bit open?C:\Windows\System32 and delete UDAAPO32.DLL and?UDAPLD32.DLL.
- For Windows 7 / Vista 64-bit?open?[color="#ff0000"]C:\Windows\System32 and delete[color="#ff0000"] UDAAPO64.DLL and?[color="#ff0000"]UDAPLD64.DLL then? open?C:\Windows\SysWOW64 and delete UDAAPO32.DLL.

Really stupid bugs in Mail 4.2 (Snow Leopard 10.6.2)

Hi everyone,
I decided to write about all bugs that I discovered in Mail 4.2 (Snow Leopard 10.6.2) since there is no known solution and since Apple's MobileMe Chat Support does not have any clue how to resolve this issues. First – I have three configured e-mail accounts: MobileMe, Gmail (IMAP) and third-party IMAP account.
The issues are:
1. IDLE command turned on causes new mail sound stop working. If I unchecked this option in all accounts (also MobileMe) the sound is back. If any of the accounts has this option checked, sound stops working again. So I found a workaround (not a solution) – I set checking for new mail to 'every 1 minute' and hoped everything would work.
2. But it's not working as one could imagine... At first it is, but then, after some time for no known (at least to me) reason Mail doesn't receive any new mail from third-party IMAP account and Gmail. MobileMe is still working. I tried every solution that in my opinion could have helped: erasing account and setting it up again, rebuilding mailboxes, deleting envelope index file, repairing permissions etc. Nothing helped. I even installed once again Mac OS X 10.6.2 Combo Update to be perfectly sure I did everything.
3. Next bug I discovered is with sending e-mails. Since I sometimes want to have access to my draft messages from internet I checked 'Store draft messages on the server' checkbox. Now... when composing a message in Mail app it's momentarily saved on the server, whether it has attachments or not. Then when the message is complete I push the Send button and the message is being sent. The reasonable mail app would then delete the draft version of this message from the Drafts folder. But not Mail 4.2, regardless in which e-mail account the message is stored. It doesn't delete the draft, what's more then synchronizes it with my other computer and then I have to log to webmail to delete the unwanted draft messages manually. VERY annoying.
Please let me know if you have similar problems or maybe anyone has a solution?
Pawel

It is my thought and contention that #1 is not a bug, but purposeful -- see:
http://discussions.apple.com/message.jspa?messageID=11160423#11160423
With regard to #2, have you ever removed the Envelope Index without first removing any IMAP or Exchange account folders? If so, that can problematic. I cannot confirm any of the experiences you are having. I have 15 accounts, 7 of which are IMAP, and the latter include one Gmail and one MobileMe, and none of these issues are present. Have you tried creating a New User Account and setting your IMAP and Gmail up as that New User to further test the application itself?
The issue with Drafts being saved beyond their apparent usefulness is not new to Mail 4.2 -- happened with some frequency in all versions of Mail 3.x, and probably less frequently in 4.2. When it has happened, which is relatively infrequently for me, it has been seen in POP and IMAP alike.
Ernie

Possible bug found in Mac Os X Tiger 10.4.11 in conjuction with iPod Touch

Dears,
I think I've found a possible bug in Mac Os X version 10.4.11 in conjunction with iPod Touch.
When the iPod is connected during boot, my Bluetooth hardware fails to be detected. When I restart the portable without the iPod connected, my Bluetooth hardware is recognised & activated again. It is reproduceable.
1. Attach iPod Touch before starting the MacBook Pro
2. Boot the Macbook
3. Bluetooth hardware should be rendered inoperative
Restore functionality:
1. Detach the iPod Touch
2. Reboot the portable
3. Bluetooth hardware is restarted / recognised.
Regards
Cedric

wrong category

IOS 5.1 Bug Found!

Just updated to ios 5.1 on an iPhone 3GS and found a bug, when removing apps from folders, the second to the last app removed will crash the springboard, and respring... why!? im not sure why but is it comon for iphones to respring? even when they are not jailbroken? ive done a clean restore from ios 5.0.1 to ios 5.1 there should be nothing there to cause a springboard restart.. right? or is this a way of the iphone protecting itself? (like safe mode for example) but thats not fair for me, what of i was in the middle of a serious situation and my iPhone crashes into a respring? im trying to record a number, or a note, or even make a phone call, will i have an issue with resprings all the time or is this a once in a lifetime thing? im actually concerned. tho absolutlly thankfull for the battery fix, it has proved its self worthy. please let me know what you think, will apple release a fix for the crash?

Hi there,
I can't seem to recreate this issue myself, but please report it to Apple here: apple.com/feedback, they are always on the lookout for bugs which they can fix.
Remember to include a detailed description of the error, including a step by step process on how to recreate.
If you have any other questions, do ask, if not, have a great day,
Nathan

BUG FOUND!! in Airport Disk programming

I'm betting this is having a bigger issue then most poeple realize as it effects reconnecting to the Airport disk.
Ok after lots of testing I've figured out a major bug in the Airport Disk Programming for Security.
This has only been verified with the following settings:
1. Airport Disk is configured with Accounts for access
2. Formatted with HFS+ USB drive.
Discription:
1. When connecting to the Airport Disk you get the error:
"Connection Failed
Unknown user, incorrect password, or login is disabled. Please retype the login information or contact the disk's administrator."
2. You retype the password and user name and it still says the same thing over and over and over.
The Cause of problem:
You connect to your Airport Disk the first time with no problem using your login and password. If you cause your connection to be interrupted for a small amount of time and you get that Warning about server disconnect and it shows your airport disk and personal disk with the disconnect button, and they disconnect!! Then you cannot reconnect to the Airport Disk till you reset the Airport Extreme.
To get this Disconnect dialog, it can be caused by a number of common uses, here are a few of the common ones:
1. you VPN into work (with Airport Disk shares mounted)
2. you change from wireless to Hardwired connection (with Airport Disk shares mounted)
3. You let your computer go to sleep when its on a wireless connection but are connected through another wireless access point hardwired to the network (with Airport Disk shares mounted)
When getting your Airport Disk volumes disconnected in this way, The Airport Extreme I'm guessing is deactivating the account and not properly disconnecting the connection. So at this point you have to Reboot the Airport Extreme to let you use your account again on the Airport Disk.
I hope some poeple from Apple actually read these. I've had to reset my Airport extreme about 24 times a day between my wife's 15" MBP and my 17" SR MBP getting this disconnect problem.
And for those poeple out there who keep having Airport Disk connection problems, Lets make sure your not having this problem. To test, simply reboot the airport extreme router & see if you can connect to your Airport Disk Volumes, then once your volumes are mounted turn off your Airport wireless (on your MAC) or unplug your Hardwire till you get the disconnect message. Then try to reconnect to your Airport Volumes after restoring your network connection.
This issue needs to be fixed ASAP!!!!
Please reply to this message with your nominations to try and get this issues raised to a P1 or lvl 1 priority so it's in the next firmware upgrade as it's not an issue with OS x programming side, as a rebot of the computer still doesn't restore the connectivity with the AirPort Disk.

HERES A SOLUTION I POSTED IN ANOTHER THREAD!
Hi,
I've been trying to work out the Hard Drive problems with the Airport Extreme for a few days and have had some success, so I'll share the info if its any use!
First of all, your printer and both hard drives all run off their own power supply, therefore, you don't need to have a powered usb hub, or just take the plug out and keep using the hub, save yourself a plug!
More importantly, I have had the same thing with the hard drive appearing in the Airport Utility yet whenever I try to connect, it comes up with an error and can't mount, although when I go to network and connect it appears but then goes wrong at the last part mounting, this is what I found...
the first time I plugged hard drive in all worked nicely, however, any time I have unplugged the power to the Aiport Extreme and connected again it'll show but never connect. When I went to make a few partitions I realised that if you unplug the router and repower, whatever HD name its seen before doesn't work until the HD name was changed again. For example....
I called my first HD to connect 'wifiHD', was working fine, next time i unplugged router was still showing in network but I couldn't mount it, I then plugged it to the mac and renamed it 'wifiDISK' for example and plugged it back into the router and it worked fine! Its very strange cos when I needed to unplug it last time I then had the same trouble and just renamed it back to 'wifiHD' it worked fine! Its a little flaw which is a right bugger to find so the bottom line is...
RENAME THE HARD DRIVE EVERY TIME YOU UNPLUG THE ROUTER AND YOU CAN MOUNT IT AGAIN
Another tip is format your HD in 'Mas OSX Extended' as it can be read by both mac and PC over the network. Then as windows isn't the best when you go to 'My Network Places' and 'Add Network Place' if you can't find the HD or even the router then enter
\\routername\\hardrivename\
in this format into the box, it'll take a mo but it'll then ask for the password! I personally have my hard drive guest access read + write so I entered
user: guest
password: base station password (or disk password as selected in airport utility)
and it all worked!
Sorry for the long explanation, hope this has helped!

Looks like a stupid bug in the octetstring...Logger

Hi all,
My WLS hanged on no disk space left and most threads were hanging as follows:
"ExecuteThread: '8' for queue: 'default'" daemon prio=5 tid=0x5f4c0d80 nid=0x6a0
waiting on monitor [0x602af000..0x602afdb8]
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:415)
at com.octetstring.vde.util.Logger.writeLock(Logger.java:195)
at com.octetstring.vde.util.Logger.alog(Logger.java:310)
at com.octetstring.vde.MessageHandler.doSearch(MessageHandler.java:312)
at com.octetstring.vde.MessageHandler.answerRequest(MessageHandler.java:67)
at com.octetstring.vde.WorkThread.executeWorkQueueItem(WorkThread.java:82)
at weblogic.ldap.LDAPExecuteRequest.execute(LDAPExecuteRequest.java:28)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
I noted that there was no other thread inside the
at com.octetstring.vde.util.Logger.alog(Logger.java:310)
that were NOT in the
at com.octetstring.vde.util.Logger.writeLock(Logger.java:195)
This makes me think that the 'Logger.alog()' method looks like this:
wrtiteLock();
writeToDisk(data); // whatever
writeUnLock();
instead of:
writeLock();
try{
writeToDisk(data); // whatever
finally {
writeUnLock();
Send it to the developers please, will you?
Thanks,
Mike.

and a valuable lesson: whenever you think you've found a bug in one of the core classes, always consider that if it really were a bug minds immeasurably superior to yours would have found and reported it a long time ago.
Ergo, whenever you find what you think is a bug in the core classes you should change your thinking to "what have I done wrong" rather than "there's a bug in Java".
my sincere apologies to Orson Wells.

Another incedibly stupid bug

If you email an image from within Aperture the programme opens up mail but then nothing happens. You have to quit mail and then restart it again for a draft to pop up as a new message with the image attached so that you can send it to the recipient. This does not happen if mail is already open.
Ever get the feeling this product was rushed to market!

Bugs are universal. What you've found is something that doesn't work on your system. You can tell us you've found a glitch but you can't go around screaming A BUG A BUG until we know it's universal. This is not a bug in Aperture.
Several of Apple's i-series and pro applications have hooks to send files directly using Mail. Has it ever worked with any other app?
Emailing an image out of Aperture appears to work on my system. I say "appears" because I didn't actually send the message. But Mail launched and some kind of image was attached. All I had to do was complete the address and write a note. I did not actually open the attached file, I just pushed the button to see if it worked. It seemed to.
bogiesan

Motion 3.0.2 bugs found from APTS Motion 3 book

Hello, I'm going through the Apple Pro Training Book for Motion 3 (great resource like all the other APTS books).
As a result, I have found some bugs/issues in Motion 3. Besides sending reports to Apple, I think I'll start this thread and keep a running list of ones I find as I go. Please add on if you find some from going through the APTS book.

+(sorry this is so long, but without seeing it, it's difficult to describe with few words)+
Chapter 4 has you working with 3D Overlays and the Compass/3D View Selector and 3D Scene Icons to see a wireframed camera and its relationship to an object as it shows the camera's field of view. You then use the 3D View tools to pan, orbit, and zoom the camera/object relationship around to change the perspective.
*Here's my buggy problem:* when I orbit the camera-object perspective around (that is, move the camera wireframe around a sphere pattern while the image is anchored to a canvas point) so that the camera icon is close to the left or right hand sides of the Canvas and the object's image plane is on a perpendicular with the monitor so that you can't see the object, then the object will flip incorrectly to a mirror image in relation to the wireframe camera even though the camera and object retain their correct spatial orientation in the wireframe, as well as the object's XYZ arrows.
In other words, Motion seems to get confused with the object's visual orientation even though it keeps the object's correct wireframed relationship to the camera including its XYZ arrows (the arrows continue to point in the correct orientation in relation to the camera, they don't flip with the visual image).
You can correct this by continuing to move the camera's orbit around the edges. It doesn't take wild orbit swings around to create this buggy behavior, just get the wireframe camera close to the left or right edges of the canvas and nudge the mouse back and forth. It will sporadically flip the object image between normal and mirror and back to normal.

Kernel Panic at low battery with MacBook bug found - with solution

Hello All,
I think I've found a bug with Leopard concerning laptops. I started a thread which I'll link to below.
http://discussions.apple.com/thread.jspa?threadID=1219413
Other people have had this same issue - I've seen it on a few different posts. Does anyone know the best way to contact Apple regarding this? I don't know how active they are in reading this forum, and I want to make sure they know about this, as it's probably something that can be fixed with an OS update.
To summarize, I'm including a couple of key posts:
Posted Nov 4th 2007...
Hello,
I just got one of the new November 07 MacBooks. The machine is great, and screams with the pre-installed Leopard.
First thing I did was plug it in to charge as I started configuring software. Once it was fully charged, I pulled the plug, and began using it on battery. My plan was to calibrate the battery, by running it all the way until it forced a sleep, then shutting down and plugging it in again, as Apple recommends.
Problem is, I never got the "Low Battery" warning, or even the sleep warning. At around 10 minutes of power left, I simply got a kernel panic. A few seconds later, the laptop just switched off.
I plugged in again for a few minutes, then ran it down again to see if I could reproduce the error, and I did get the low battery warning.
The next time the battery ran down, it gave me the kernel panic.
Is this happening to anyone else? Is it a new MacBook problem, or a leopard power management problem? I'm having no other issues at all with the MacBook or Leopard. Any help would be appreciated.
Thanks!
Nov 12th, 2007...
Well, It's been a few cycles since the first one, and all is well. I'm getting the low battery warning when it runs low, and no kernel panics (knocking on all available wood). If I start having problems in the future, I'll update this thread, but for now I'm marking it answered. It was probably Leopard not reading the uncalibrated battery correctly.
Dec, 31st 2007.....
Hello all,
Short followup here: I've have 30 successful cycles after the first couple of kernel panics, and it's time to calibrate the battery again. I tried to do it yesterday - charged the battery all the way, used the macbook while plugged in for two hours, unplugged the adapter and continued to use it until I got the low battery warning. I shut down everything and let it sit - waiting for it to go to sleep. Instead, I got a kernel panic, and the computer shut down. It would not restart until I plugged it in, but I know there was some battery left, since it panicked at 2% battery. I let it charge for an hour or so, then used it again until I got the low battery warning. This time, it went down to 0%, but panicked and shut down instead of going to sleep.
I'm trying this again, after charging all the way last night, and just leaving it on to drain. I'm at 20% right now, and I'll post to let you know what happened.
Dec 31st, 2007....
Hello All - I think I've figured this out. Looks like a software bug with Leopard.
I did get another kernel panic just now at 0%, after the low battery warning. But then I had a revelation. In trying to calibrate the battery, I had set my energy saver settings to never sleep under the battery settings - so I could leave the notebook overnight to drain. I gave it a bit of a charge, then set the battery setting (in energy saver) to sleep after 20 minutes. I restarted, used the computer for a while, got the low battery warning, the computer went down to 0%, then went to sleep as it should.
I believe that since I had the computer set to "never" go to sleep, Leopard didn't know how to handle it when the battery ran down, and kernel panicked. Perhaps this happens on new MacBooks, because these settings aren't written yet? Regardless, it's obviously an OS level bug here.
For those having the problem, make sure your battery settings under energy saver are set to allow sleep after a time.

Start here:
_http://www.apple.com/feedback/macbook.html_
Joe

Quick Mask Bug found (Mac OS 10.6.8)

Hello there!
I found a bug using the quick mask while editing a layer mask.
Example:
You have a document with a layer that has a pixel mask.
Then you alt-click the layer mask to display it in black and white, to be able to paint on it for example.
If you now make a selection, while you see the black and white layer mask (eg. rectangular marquee or whatever) and then enable the quick mask mode, to modify the selection (display it in ruby mode), the red (ruby) mode displays wrong.
It will not only mask everything red that is masked (or selected, depending on your preference), but also everything from the pixel mask that is black.
This is wrong and has been different in all versions before. It makes no sense to display the layer mask in quick mask mode while editing a selection.
Usually only the selection (or mask) should be displayed in the quick-mask-color (here: red) regardless of being in the pixel layer mask or not.
I can reproduce this error in a new file. I can post a video to illustrate it, if my english is not precise enough to describe the bug.
Could you please fix it soon? Thank you a lot!
System Info:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64

Hello,
no it does not change it. But I found out what causes that bug. It's not a displaying issue. Photoshop does something it did not do earlier, this is:
My quick mask color is the same as the layer mask color.
Photoshop displays the (colored) layer mask as well when switching to quick mask (selection) mode.
Using another color makes it easier to differenciate between the layer mask and the quick mask but here's the problem:
When pressing q (to switch to quick mask mode) photoshop will not only display the quick mask, but also the layer mask in their respective colors.
But displaying the layer mask in a color overlay while already being in the b+w layer editing mode makes no sense.
Look here:
Now i set my layer mask color to magenta to make it distinguishable:
New file: Just a colored layer with a pixel mask (the center displays the transparency grid):
This is the layer mask in mask editing mode:
Now if i press Q, not even having made any selection or so, "quick mask" mode will also display the layer mask in its resp. color:
That makes no sense, because I am in layer mask editing mode and I can already see it in black and white.
Is it normal, that in quick mask mode the layer mask is displayed as a color overlay as well? I can't remember seeing this behavior earlier!
Thank you!

URGENT!!! Bios Bug found for P500 series BIOS v2.90. TAIS really needs to fix this!!

Affected unit: P500-ST6844 PSPGSU-0Q2012
I have had sleep issues with my laptop since I first purchased it back in 2010. I have made a previous post about it here: http://forums.toshiba.com/t5/Batteries-and-Power/Laptop-turns-off-instead-of-going-to-sleep/m-p/3101...
I recently found some some helpful troubleshooting documents for windows 7 power management on the Microsoft website. One of the utilities it suggested to use is the PWRTEST.exe included Windows driver SDK. Running PWRTEST /sleep /s:4 results in a successful Hibernate cycle, however running PWRTEST /sleep /s:3 results in:
NO.0 Transition--TargetState: S3
Error: Pwrtest tracing might be buffer overflow, and the data of this power is discarded.
    File: d:\5359\base\power\tools\pwrtest\exe\pstrace.cpp
    Line: 1653
    Error Code: 0xc0000001
importing pwrtest.etl created by the utility into the event viewer reveals bunch of these errors:
Unexpected GPE event was fired on GPE bits that should be disabled.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Acpi" Guid="{c514638f-7723-485b-bcfc-96565d735d4a}" />
<EventID>2</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>101</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000001</Keywords>
<TimeCreated SystemTime="2012-12-23T03:10:45.894731800Z" />
<EventRecordID>4045</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" ProcessorID="3" KernelTime="1572689" UserTime="0" />
<Channel />
<Computer>ChrisSolomon-PC</Computer>
<Security />
</System>
- <EventData>
<Data Name="GpeRegister">3</Data>
<Data Name="UnexpectedEventMap">142</Data>
</EventData>
</Event>
as well as this error :
Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="" Guid="{f2e0e060-bf32-4b88-b8e4-5cad15af6ae9}" />
<EventID>0</EventID>
<Version>0</Version>
<Level>1</Level>
<Task>0</Task>
<Opcode>2</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2012-12-23T03:10:45.852354300Z" />
<EventRecordID>4043</EventRecordID>
<Correlation />
<Execution ProcessID="5644" ThreadID="3088" ProcessorID="0" KernelTime="1925" UserTime="1240" />
<Channel />
<Computer>ChrisSolomon-PC</Computer>
<Security />
</System>
- <ProcessingErrorData>
<ErrorCode>15003</ErrorCode>
<DataItemName />
<EventPayload>4F626A656374203D205C5F53422E545641502E5350464300</EventPayload>
</ProcessingErrorData>
</Event>
doing reasearch on the first error reveals that this is caused by a bug in the BIOS.
the bug causes either one of two things two happen P500 does not enter Sleep (S3) properly, or when S3 is attempted the unit appears to enter S3 successfully, and the led sleep indicator blinks, but when trying to resume from S3, unit starts up from an off state and hangs after Toshiba bios screen is displayed. normal boot operation only occurs after forcing a power down and restarting unit.

Anyone running windows in the same laptop can check the same issue of battery drain due to WOl being enabled by default - in the Device Manager under the network cards, opening the settings menu for the ethernet wired card the default for Wake-on-LAN on my computer was set to enabled. This can be changed to disabled, and you may need to also disable the setting for Wake on Magic Packet. Also in the Power Management tab it is possible to uncheck the settings for "Allow this device to wake the computer" and "Only allow a magic packet to wake the computer"
In my laptop these were all set to enabled by default.

CR.XI.R2: report assistant: bug found

Post Author: felix
CA Forum: Crystal Reports
Hi @all, there is a small bug in the report assistant. start the assistant select your datasourceselect your tablesclick next(found out, that you forgot a table)click backselect your tablesclick next(found out, that you forgot a table again)click backnow the view of your assistant is changed into a very small window and you can not change it back anymore before cancel the assistant and starting again. Greetings Felix

Hello,
CR 2010 is for Visual Studio 2010 only. It's not a stand alone install and it has no usable COM components ( RDC - craxdrt.dll ) that can be using in VS .NET.
There is no upgrade for the RDC. You'll have to rewrite your app to use CR .NET Assemblies. You can use your old reports though but you may have to save them as RPT first in your VB project, or export them to RPT format from the viewer or in code.
You can find samples here:
Root Page
http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsHome
Enterprise Samples (including managed and unmanaged ras)
http://wiki.sdn.sap.com/wiki/display/BOBJ/BusinessObjectsSDKSampleApplications
Non-Enterprise Samples
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
Exporting Samples (RAS)
http://wiki.sdn.sap.com/wiki/display/BOBJ/NETRASSDK+Samples#NETRASSDKSamples-Exporting%2FPrinting
Thank you
Don

Stupid BUG found

Similar Messages

Maybe you are looking for