[stupid]error: cannot resolve "libusb1", a dependency of "libdc1394"

Hi!
:: Starting full system upgrade...
resolving dependencies...
error: cannot resolve "libusb1", a dependency of "libdc1394"
error: failed to prepare transaction (could not satisfy dependencies)
:: libdc1394: requires libusb1
I needed libdc1394 only for gstreamer-plugins-bad, so I removed those. Wanted to try out if I need them anyway. But... What if? Is this a bug, did I do something wrong or did I just update while the required version isn't up yet and should unset testing again?
EDIT: Uh, sorry, yes, I guess that's just me not waiting for the files to be distributed to the servers I guess.
EDIT2: At least looks like it, should wait & think instead of type and type. Me drinking to much coffee. Marking thread as "stupid" instead of "solved" now.
Last edited by whoops (2009-05-03 23:18:02)

I do not thing archbang is officially archlinux distributions (you are on an archlinux forum). This error does not appear on the current archlinux distribution. My guess is that here is a confusion between python / python2 / python3. Just run pacman -Si to know (or the equivalent of pacman for archbang).
I would suggest you to use the official archlinux instead of this fork, archlinux has much more support and users and I do not quite understand what archbang has to offer: Their homepage said that it is archlinux combined with openbox, but you can just do
pacman -S openbox
on arch; it does not seems to justify a fork (but please correct me if I am wrong).
Last edited by olive (2012-06-17 22:00:23)

Similar Messages

Cannot resolve "python", a dependency of "python-distutils-extra"

Attempting to perform a full system upgrade on 32 bit archbang 2012.05, and when I `pacman -Syu`: this occurs
Anyone know how to deal with this issue?
$ sudo pacmatic -Syu
Recent ML chatter:
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
:: Replace libusb with core/libusbx? [Y/n] y
:: Replace procps with core/procps-ng? [Y/n] y
:: Replace udev with core/systemd-tools? [Y/n] y
resolving dependencies...
warning: cannot resolve "python", a dependency of "python-distutils-extra"
:: The following package cannot be upgraded due to unresolvable dependencies:
python-distutils-extra
Do you want to skip the above package for this upgrade? [y/N] y
warning: dependency cycle detected:
warning: util-linux will be installed before its systemd-tools dependency
looking for inter-conflicts...
Targets (71): acl-2.2.51-2 arandr-0.1.6-1 attr-2.4.46-2 automake-1.12.1-1
bash-4.2.029-1 binutils-2.22-7 bzip2-1.0.6-4 coreutils-8.17-1
cryptsetup-1.4.2-2 curl-7.26.0-1 db-5.3.21-1 deadbeef-0.5.4-2
device-mapper-2.02.95-6 dnsutils-9.9.1-1 e2fsprogs-1.42.3-1
filesystem-2012.2-5 gcc-4.7.0-6 gcc-libs-4.7.0-6
glib2-2.32.3-1 gmp-5.0.5-1 gpm-1.20.6-8 hwids-20120512-1
initscripts-2012.05.1-3 isl-0.09-2 kmod-8-2 krb5-1.10.1-3
libcap-2.22-3 libevent-2.0.19-1 libldap-2.4.31-2 libnl-3.2.9-1
libpipeline-1.2.1-1 libssh2-1.4.2-1 libusb-1.0.9-1 [removal]
libusb-compat-0.1.4-1 libusbx-1.0.11-2 linux-3.3.7-1
linux-firmware-20120227-2 lvm2-2.02.95-6 lxappearance-0.5.2-1
lxinput-0.3.2-2 lxterminal-0.1.11-2 man-pages-3.41-1
mdadm-3.2.5-2 menu-cache-0.3.3-1 mkinitcpio-0.9.1-1
mkinitcpio-busybox-1.20.1-1 mpfr-3.1.0.p10-1 oblogout-0.2-11
openbox-3.5.0-7 openssl-1.0.1.c-1 pam-1.1.5-3 pciutils-3.1.9-2
perl-5.16.0-2 pinentry-0.8.1-4 procps-3.2.8-5 [removal]
procps-ng-3.3.3-1 python2-distutils-extra-2.32-1
run-parts-4.3.1-1 shotwell-0.12.3-1 sudo-1.8.5.p2-1
sysfsutils-2.1.0-8 syslog-ng-3.3.5-1 systemd-tools-184-2
udev-182-1 [removal] usbutils-005-2 util-linux-2.21.2-1
virtualbox-archlinux-additions-4.1.16-1
virtualbox-archlinux-modules-4.1.16-1 volumeicon-0.4.6-4
xfsprogs-3.1.8-2 zlib-1.2.7-1
Total Installed Size: 390.46 MiB
Net Upgrade Size: 3.42 MiB
Proceed with installation? [Y/n] y
(68/68) checking package integrity [----------------------] 100%
(68/68) loading package files [----------------------] 100%
(68/68) checking for file conflicts [----------------------] 100%
error: failed to commit transaction (conflicting files)
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/__init__.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/__init__.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/auto.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/auto.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/__init__.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/__init__.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_extra.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_extra.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_help.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_help.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_i18n.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_i18n.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_icons.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/build_icons.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/clean_i18n.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/clean_i18n.pyc exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/pylint.py exists in filesystem
python2-distutils-extra: /usr/lib/python2.7/site-packages/DistUtilsExtra/command/pylint.pyc exists in filesystem
Errors occurred, no packages were upgraded.
No pacnew files to update.

I do not thing archbang is officially archlinux distributions (you are on an archlinux forum). This error does not appear on the current archlinux distribution. My guess is that here is a confusion between python / python2 / python3. Just run pacman -Si to know (or the equivalent of pacman for archbang).
I would suggest you to use the official archlinux instead of this fork, archlinux has much more support and users and I do not quite understand what archbang has to offer: Their homepage said that it is archlinux combined with openbox, but you can just do
pacman -S openbox
on arch; it does not seems to justify a fork (but please correct me if I am wrong).
Last edited by olive (2012-06-17 22:00:23)

Cannot resolve "pambase", a dependency of "pam" [solved]

...thoughts?
:: Starting full system upgrade...
resolving dependencies...
warning: cannot resolve "pambase", a dependency of "pam"
:: The following package cannot be upgraded due to unresolvable dependencies:
pam
Do you want to skip the above package for this upgrade? [y/N]
error: failed to prepare transaction (could not satisfy dependencies)
:: pam: requires pambase
EDIT: updating servers via reflector solved this. Odd.
Last edited by graysky (2012-06-14 10:33:34)

I do not thing archbang is officially archlinux distributions (you are on an archlinux forum). This error does not appear on the current archlinux distribution. My guess is that here is a confusion between python / python2 / python3. Just run pacman -Si to know (or the equivalent of pacman for archbang).
I would suggest you to use the official archlinux instead of this fork, archlinux has much more support and users and I do not quite understand what archbang has to offer: Their homepage said that it is archlinux combined with openbox, but you can just do
pacman -S openbox
on arch; it does not seems to justify a fork (but please correct me if I am wrong).
Last edited by olive (2012-06-17 22:00:23)

Error: cannot resolve "gtk-engines =2.14.2", [SOLVED]

This is more or less self-explanatory.
[duncan@duncan-arch ~]$ su
Password:
[root@duncan-arch duncan]# pacman -Su
:: Starting full system upgrade...
warning: gnome-mount: ignoring package upgrade (0.7-1 => 0.8-1)
warning: gnome-volume-manager: ignoring package upgrade (2.22.1-1 => 2.22.3-1)
warning: nautilus-cd-burner: ignoring package upgrade (2.22.0-1 => 2.22.1-1)
resolving dependencies...
error: cannot resolve "gtk-engines>=2.14.2", a dependency of "gnome-themes"
error: failed to prepare transaction (could not satisfy dependencies)
:: gnome-themes: requires gtk-engines>=2.14.2
[root@duncan-arch duncan]#
Last edited by Raccoon1400 (2008-06-03 11:26:17)

Solved. The issue was fixed in today's updates.

Error:cannot resolve Symbol class"name"

when I have compiled Bean class named SlBean which has primary class named pk, I recevied following error message(I compiled pk class without error) :
cannot resolve symbol
symbol : class pk
location: class SlBean
public pk ejbCreate(

Sorry , its not classpath problem. You have to simply import the pk class if its in any package. I am assuming you have packaged your pk class with ejb jar file.
for eg. if your class is
package abc.xyz
public class pk
then in your bean class import
import abc.xyz.pk;
--Ashwani

Compiling error - cannot resolve symbol

Hi,
I am working on writing out this basic code for a project. When I compile, I get an error "Cannot resolve symbol" for the gpa variable. Please help!
My intention is to use the hours and points from the crHours and nbrPoints methods, and use them to calculate GPA in the grPtAvg method:
public class Student
     public static void main(String[]args)
idNum();
crHours();
nbrpoints();
gpa = grPtAvg(hours, points);
System.out.println("Student's GPA is " + gpa);
public static void idNum()
int id = 2520;
System.out.println("Student's ID is " + id);
public static float crHours()
float hours = 5;
System.out.println("Student's credit hours are " + hours);
return hours;
public static float nbrpoints()
float points = 22;
System.out.println("Student's earned points are " + points);
return points;
public static float grPtAvg(float hours, float points)
float gpa;
gpa = points / hours;
System.out.println("Student's computed GPA is " + gpa);
return gpa;

That's because you're doing the same thing (in a somewhat different way) with those.
The variables: hours and points have already been returned to main methd, right?Yes, but then the main method ignores them.
So, they should be available at this point in the code, is that right?Available in the sense that you can read them, but not in the sense that there are hours and points variables within scope in the main method.
You want to do this:
public static void main(String[] args) {
   idNum();
   float hours = crHours();
   float points = nbrpoints();
   //create a new float
   float myComputetdGpa = grPtAvg(hours, points);
   System.out.println("Student's GPA is " + myComputedGpa);
}

I am getting an error cannot resolve symbol variable?

I am trying to run a PdfFormGenerator.java file and am using the iText API, hence have included
the iText.jar file. When I compile the code I keep getting the following two errors:
cannot resolve symbol variable CLASS_LOCATION
cannot resolve symbol variable FORM_LOCATION
can anyone guide me what I may have done wrong.
Thanks,
Zub

Hi! To be more specific its these to line of the code is were I am going the errors:
private String classLocation = Constants.CLASS_LOCATION;
private String formLocation = Constants.FORM_LOCATION;Thanks

Compiler error cannot resolve symbol

Hi people,
i'm having this compile time error that, when i create a class and calling that class in another class gives the error cannot resolve symbol classname and it also happened when i created a bean and referencing the bean class in another bean when i'm using Jsp. thanks in advance.

It would be helpful if you post the exact error message. If you use a system Classpath, then it must contain the root directory for the package directory(s).
For example, if the source code for a file starts with
package my.package;
and you have a directory structure c:\myjava\classes\my\package then the Classpath must contain c:\myjava\classes.

When i try to use max() & pow() in jdbc i get error "cannot resolve symbol"

hi,
when i tried to use pow() & max() in my jdbc programme i got compilation error "cannot resolve symbol".
even i have imorted java.math
this is the sample.
pr1= (fy/(L*B*pow(10.0,-6.0))+((6*mx)/(L*B*B*pow(10.0,-6.0)))+((6*mz)/(B*L*L*pow(10.0,-6.0))));
all of above are double.
and with max();
pr=max(pr1,pr2);
all of above are double.
please help.
thanks in advance.
satish

hi
Hartmut
thanks hartmut;
i am new in java so i have some problems, but thanks for helping me.
please help me again.
as i have already posted another probleme which i have with selecting 1000 rows 1 by 1 from a table & manipulate 1 by 1 on that and then store all manipulated row to another table.
when i tried to do so i am able to select only 600 rows and manipulate them & store them.
i did not get any exception or any error.
can this possible that microsoft access driver has not that much capacity to provide 1000 rows or it is problem with jdbc.
please help.
satish
thanks again.

WebHelp Template Error: cannot resolve macro

RoboHelp HTML 5.0.2 Build 801
Word 2003 SP3
I have been working fine until this afternoon. I tried to
generate webhelp in two different projects. In the output window I
see messages through Updating files, and then a message flashes and
it goes to done, but nothign is there to view.
The message is something like Template Error: cannot resolve
macro WHH#78 or something like that. I really cannot read it.
I have look for the answer on this forum and in the Help
system, to no avail. I will be leaving soon but will come in the
morning and try to start troubleshooting again. Any ideas that
might help would be greatly appreciated
sandy

Thanks for your time.
I am using RoboHelp HTML 5.0.2 Build 801
I have created 5 or 6 help files. I always open them with
RoboHelp HTML because the primary layout is web help to be
published to the web.
I always use the Single Source Layouts in the Project tab to
generate Printed Documents. I usually use the generate primary
layout for the web help.
This is the exact error I get, no matter which of my projects
I try to generate web help for:
Template Error: can not resolve macro: WH_CSH2_HTM
Finished compiling WebHelp in 6 sec(s)
Should I reinstall WebHelp to fix the corrupted template? If
so will I have to restore my default.css?
I am a really plain bread and butter user. I have not
imported any templates or customized any templates. I have always
just opened my projects with ROBOhelp HTML and generated.
(Successfully, I might add, up until now).
Thanks again for any help you can give me.
Sandy

Error: cannot resolve dependencies for "codecs"

I receive this error when I'm trying to upgrade codecs 20060501-2 package. It tries to find libstdc++5 which is in Testing repository, and I'm not using Testing.
error: cannot resolve dependencies for "codecs":
"libstdc++5" is not in the package set
I think libstdc++5 should be moved to Current or something like that (You know what to do )...
Best regards

Skyscraper wrote:
I receive this error when I'm trying to upgrade codecs 20060501-2 package. It tries to find libstdc++5 which is in Testing repository, and I'm not using Testing.
error: cannot resolve dependencies for "codecs":
"libstdc++5" is not in the package set
I think libstdc++5 should be moved to Current or something like that (You know what to do )...
Best regards
They are in testing repository:
http://archlinux.org/packages.php?s_rep … ate=&pp=50

Error: cannot resolve dependencies for "avahi"

Greetings:
I get the following message when I run paman -Syu
:: Replace mkinitrd with mkinitcpio from "current"? [Y/n]
error: cannot resolve dependencies for "avahi":
"dbus" is not in the package set
So, I thougth I'd get rid of avahi, but pacman -R avahi returns:
error: this will break the following dependencies:
avahi: is required by gnome-vfs
I've tried removing dbus from the daemons in rc.conf. I've tired restating dbus folloing instrcutions from another thread here.
Pacman -Ss dbus returns:
community/perl-net-dbus 0.33.3-1
Perl extension for the DBUS message system
So I am thinking, and am probably completely wrong, that pacman is searching for a repo with dbus in it?
Color me stumped.

Yes, I have the default install one uncommented:
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/extra
Should I add a different one?

Error: cannot resolve dependencies for "font..

what could be that?
[root@myhost root]# pacman -S -u --sysupgrade
error: cannot resolve dependencies for "fontconfig":
fontconfig conflicts with xfree86
thxs
(if u can put it in spanish, better )

but before u post me, updated pacman, and then, not send me that error

solved error: cannot resolve dependencies for "hal"

Hello all,
I tried doing a pacman -Syu today and recieved the following: error: cannot resolve dependencies for "hal"
Then I did a pacman -S dbus-glib and got : dbus-glib: not found in sync db
then I did pacman -S dbus and recieved the same message.
Then I did pacman -S hal and got:
error: cannot resolve dependencies for "hal":
"dbus-glib" is not in the package set
Am I missing something? Any help would be greatly appreciated.
Oh man, in my fleeting moment of panic I didn't think things through and posted right away.
I commented the following lines in pacman.conf and now it works
#XferCommand = /usr/bin/aria2c -s 2 -m 2 -o %o %u
#XferCommand = /usr/bin/pacget %u %o
Not too sure why, but I am happy all is working.
Last edited by Cancel (2007-02-17 08:15:54)

I followed this wiki and it did make a difference. It is still very fast downloading packages.
http://wiki.archlinux.org/index.php/Imp … erformance
I haven't had a chance to uncomment those lines again to see if it still gives me errors, but you might have luck trying what the wiki suggests.
After following the wiki, pacman tries a bunch of servers to give you the best speed possible (if I remember correctly). I hope this helps you.

Need help - method call error cannot resolve symbol

My code compiles fine but I continue to receive a method call error "cannot resolve symbol - variable superman" - can't figure out why. Here is my code:
public static String caesar(String message, int shift)
{   [b]String result = "";
for(int i = 0; i < message.length(); ++i)
{   [b]char newChar = message.charAt(i + shift);
result += newChar;
return result.toUpperCase();
I entered "superman" for message and "3" for the shift. Can someone please help? Thanks!

Your post worked great - especially since it made me realize I was going about it all wrong! I was attempting to convert "superman" to "vxshupdq" - basically a cipher shift starting at index 0 and shifting it 3 character values which would result in s changing to v. I restructured my code:
public static String caesar(String message, int shift)
{   [b]String result = "";
for(int i = 0; i < message.length(); ++i)
{   [b]char newChar = message.charAt(i);
result += (newChar + shift) % message.length();
return result.toUpperCase();
But it's displaying the result as a "60305041". How can I get it to display the actual characters?

[stupid]error: cannot resolve "libusb1", a dependency of "libdc1394"

Similar Messages

Maybe you are looking for