Stupid error on upload to .mac

Ok, I can't for the life of me get our macbook to publish to our .mac without getting that stupid error code that seems popular in these forums.
I've tried turning off all sleep settings, screen saver, .mac syncing, firewall, shut down ALL programs but iweb and everything is up to date. 1.1.3 or whatever it is.
I can get my powermac to publish to .mac with 1.1.2 but not the macbook (yes they are totally different locations. One at work one at home...). I'm going insane with this and I need this thing published by tomorrow : (
Thanks for any help!

Are you leaving iWeb open with the error message while you look at Activity Monitor? You should be.
Try this:
First delete the pre-publish.plist file, reopen iWeb and make a change to the pages you'd like updated, like moving a shape 1 px then moving it back, then try "Publish All" in iWeb.
If you want .mac-like features without Publishing to .mac search for iWeb FAQ

Similar Messages

  • Have a message of an error while uploading photo on to a site

    Wondered if anyone else has had this problem.  Tried to upload photos on to a selling site and while uploading an error flashed up in red.  Error while uploading. This was while using my Pro Mac laptop.
    Can anyone advise please?  Thank you

    What service are you trying to access?
    [topic moved to Acrobat.com forum]

  • AIR(Desktop) -Upload in MAC app store

    Please help me to upload air(desktop) application into MAC- App store.
    I can create .app file and .dmg with native instalers (with won created .p12 with flashbuilder).
    And i have apple developer .p12 certificate. (I have apple developer ID)
    I got this error while packing when using created .p12 certificate with my Apple Developer account.
    Please help me.! I need to upload my (.air application for MAC) upload in MAC App store.
    Please give me as step by step method as if u can.
    Thank you all..!
    Note: I can upload iPhone, iPod and iPad Applications in appstore.
             But, I need to upload MAC app store.
    I tried:
    http://pigsels.com/2012/04/air-app-store-publishing-guide/
    http://forums.adobe.com/message/1975832#1975832

    I tried this
    http://forums.adobe.com/message/1975832#1975832

  • Stupid error message, please help!

    I go to upload my songs after restoring my ipod a couple of times and i get this error message:
    Attempting to copy to the disk "ASHLEY'S IP" failed. The disk could not be read from or written to.
    So please help me.
    ANYONE!!
    PLEASE!!!

    myraw24 wrote:
    If anyone can help me, please do. This stupid error message will not get my player to work. "We're having trouble connecting to the X1 platform." Error message, RDK-03036According to this topic:http://forums.xfinity.com/t5/X1/RDK-03006-Error-Code/m-p/2095414/highlight/true#M14295 The error means there's an outage. Check the website, app or hotline for any outages. If there's an outage then check to see if it's resolved. If resolved, reboot all equipment to reconnect to the network.

  • AIR for iOS getting error while uploading the app, ITMS-9000 "Missing Provisioning Profile"

    hi!
    I get this error, when uploading the binary to Itunes. Any help, on how to solve out this problem ? And what does it mean ?

    for install on devices, you need to use a distribution cert. and a distribution provisioning profile for adhoc. When ready for AppStore you can use same distribution cert. but distribution provision profile for appstore. i completely use Windows PC for my entire process and use testflight to distribute to my testers. I'm not sure how the process is for simulator on the Mac is.  I just the use mac to create my certs and profiles and then application loader.
    When you tried upload to testflight did u use a distribution cert (p12) and an adhoc distibution provisioning profile. Also are the devices you are sending to are also registered to that profile.
    Also ive been doing this for 3 years now but consider myself a newbie still cuz I'm self taught and still learning and my ways of doing things in an unorthodox way but on average I have about 10 uploads of updates or new apps to the AppStore a year and haven't had an app rejected. These forms will be your best resource of info with users like @colin.

  • Upload to .Mac constantly interrupted!

    I have created 7 Sites with 1 to 14 pages per site. Everytime I try to upload to .Mac I get an error message "... problem while uploading file xxxx ...". So, only part of my web site is uploaded. The interruption happens always at a different stage through the upload process, so it can't be related to a certain file.
    Anyone who has the same problems?

    Uploads connection speeds are nothing like your download speed and every ISP is different.
    Even a very fast cable Internet connection is (at best) one third of your download speed. Other ISP's like DSL sometimes place restrictions on your upload bandwidth. Dial-up? Forgetaboutit.
    Solutions?
    Publish your pages in smaller batches. Once your "big files" (movies, podcasts or music) are published as pages iWeb needs to only modify the html code in some previously published pages.
    You can add a little bit at a time to your Site. Once you've got the large pages uploaded (one at a time if needed) you can continue to add to your Site and even adjust the page order.
    Uploading data is like trying to suck a potato through a straw. It works better if you cut up the potato. Even better still if the potato is "mashed" (properly compressed).

  • Error while uploading Template

    Error while uploading Template in Internet Procurement Catalog Administrator responsibility
    I downloaded "Item Price" and i had one item onto spread sheet and tried to upload in above responsibility.
    This is how header level is in the template and line level has item information.
    #ENCODING     Cp1252                                                  
    Language Section*     EN-US                                                  
    Catalog Section     Supplier*      Title                                             
         FEDERAL INDUSTRIES     Test Catalog     
    ***********When i looked into log file i see error message ********************
    [5/20/11 7:58:13 PM] <INFO> Session language altered to AMERICAN
    [5/20/11 7:58:13 PM] <INFO> Session territory altered to AMERICA
    [5/20/11 7:58:13 PM] <INFO> ********** Loader started **********
    [5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
    [5/20/11 9:35:08 AM] <ERROR> -> Missing Language Section.
    [5/20/11 9:35:08 AM] <INFO> *********************
    [5/20/11 9:35:08 AM] <ERROR> Failure Message is ::
    [5/20/11 9:35:08 AM] <ERROR> USR:MSG:POM_CAT_MISS_LANG_SEC
    [5/20/11 9:35:08 AM] <INFO> *********************
    [5/20/11 9:35:08 AM] <INFO> Job failed
    [5/20/11 9:35:08 AM] <INFO> ********** Loader stopped **********
    I already had language section in the template as shown above, not sure why it is giving error.
    could you please let me know how to troubleshoot
    Edited by: 855902 on May 20, 2011 5:02 PM

    Hi,
    We believe you are getting this error because of some kind of format issue in the flat file which you are loading..
    You can refer below URL:
    http://appswork.blogspot.com/2009/09/catalog-loader.html
    /S.P DASH

  • Error while uploading BITMAP image in SAP through SE78.

    Hello all,
    I am getting below error while uploading image into SAP through SE78.
    'Bitmap file: No color table available (True Color, Bitcount 32)'.
    I have tried searching for solution and got some help from below reply from a thread:
    You may do these options:
    1. Lower the resolution of the image
    2. Lower the file size of the image
    Regards,
    Reymar
    I have got a image size of 6.14 KB and resolution of 72*72 dots per inch.
    Thanks in Advance.
    - Jayant Sahu.

    Hi Daniel,
    First of all, if you dont mind, start a new thread for your question please.
    Anyways, answer to your question is --
    You need to save your picture with lower-most bits BITMAP Type. When you were saving your picture as .bmp, take care you are passing lower-most BITMAP type and not 24-bit as it may be as default.
    This way, your problem would be resolved.
    Thanks.
    Kumar Saurav.

  • Error while uploading a file using ke13 transactoin

    Hi..
    We have the following error when uploading a project plan by cost element excel upload using KE13 transaction...
    There is a z program that calls this ke13 program while uploading. The excel file is split into x files and uploaded..
    THe error is: Quantity Unit HR cannot be converted to & and error occured when generating data for planning processor...
    Any idea if someone face similar situation..
    Any clue would help us..
    Thanks,
    Kanthi.

    Hi,
        Covert quantity to char and upload the data.
    Regards
    Amole

  • Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

    Hi Guys,
    I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
    Maximum Size set in Our SYSTEM is :9765MB.
    Approx size of the Document tried is more then 300MB.
    Appreciate your help on this.
    Regards
    Tarun

    Hi Tarun,
    Please check the below system properties using system user login
    attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
    attachments.upload.enable.buyers-  " Enable/Disable uploading of attachments by internal users"
    Also Please check with other attachment, contracts related properties in the System.
    Let me know if this helps.
    Thanks,
    Raj.

  • Error while uploading Transport request

    Hi friends,
    Error while uploading transport request to the transport directory,
    we downloaded the trasnport request from one sap system which have a set of developments
    for example downloaded files are;
    control file: K900470.SAD and Data file: R900470.SAD fronm transport directory.
    we are trying to upload the transport to another Sap system
    we have
    Uploaded  the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
    Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
    we tried tro  add in the import queues using  TCODE: STMS
    and trying to import.
    During import we get
    error:
    HALT: unknown dynpro format: d021s_length() returned 0 Please contactthe SAP support.
    End with rc : 16
    Please help me with the problem.
    Thanks in advance
    Deepak

    Hi,
       Check the versions of the two sap systems you are downloading and uploading the transport requests

  • DB Connect Load - "Unknow error while uploading data from the DB Table"

    Hi Experts,
    We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
    I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
    At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
    Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
    Please advice.
    Thanks,
    Abhijit

    Hi,
    Sorry for bumping an old thread ....
    Did this issue get ever get resolved?
    I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
    One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
    I get "Unknown Error" whenever I trigger the data package.
    Advait

  • I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

  • Getting error while uploading a document in a library

    Hi,
    I'm getting a weird error while uploading the document in the library. And I don't get it all the times but most of the times.
    It reads:
    The file <library name>/<file name> has been modified by i:0#.<user-id> on <datetime stamp>
    How to resolve this ? I have referred many articles on this one, but none helped.
    Thanks for your response in advance.
    Regards

    Hi Prajk,
    Based on your description, I recommend to check if there are any ItemAdded event receiver or workflows which are triggered when an item is created to update the document properties in the library.
    If there is any ItemAdded event receiver on the library, I recommend to wait for ItemAdded to finish before the ListFieldIterator control residing on EditForm.aspx loads (It’s the ListFieldIterator which displays the Item’s fields ).
    http://blogs.msdn.com/b/manuj/archive/2009/09/22/itemadded-event-on-document-library-the-file-has-been-modified-by-on-error.aspx
    If there is any workflow on the library, I recommend to add a Pause for Duration step at the beginning of the workflows.
    If above cannot work, please check ULS log for detailed error message.
    For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Popup window error message on a Mac .....There was a problem connecting to the server 172.17.0.22

    I keep getting a popup error message on my mac "There was a problem connecting to the server 172.17.0.22"
    How do I fix this problem

    That is The moment you go to open a new website it will reappear and then you need to close it before I can access the website I want. …

Maybe you are looking for