Stupid exam question from last year

I need help, this is a question i just cant seem to decifer.
A simple way of shortening words is to remove all vowels (Like in tel. directories).
I must write a programm that will take as input a string (of up tp 255 chars) and pritn out the same string with the vowels removed. Vowels are a,e,i,o,u. I must remove lower and Upper case vowels. without changing case of reamining string. I am not allowed to change the sapcing or punctuation.

doesn't klingon only cover angry words?The sounds of tlhIngan Hol have occasionally been used by the KLI tribe for writing Klingon. There are no punctuation characters as Klingon doesn't use punctuation, although a few of Okrand's sentences do. Since Okrand doesn't use the Okuda orthography, and neither does Okuda, for that matter (except just randomly selecting glyphs), if we accept it as "real" Klingon pIqaD we don't really know anything about how it's written.
The convention has developed that it's written horizontally, from left to right, like English, and usually each sentence is given its own line and centered (some follow this convention when writing the romanized orthography as well). To my knowledge there is not a formal Uncode standard for this alphabet yet.

Similar Messages

  • In looking at my calendar for January, I found all the entries from last year. I thought I would delete the while month and start over, but it deleted all calendars from icloud.  Can I get them restored and how.  Stoormy

    In looking at my calendar for next year I found all the entries from last year were there as well as a few more  I intended to delete January and just start over but everything was deleted including from icloud,  Any way I can get those restored.
    Thanks  Glenn

    Maybe here:
    iCloud: Troubleshooting creating backups

  • I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

    I bought a new MacBook Pro (Mac Os 10.8.4) when conecting my mobile broadband dongle (Huawei E122) the computer does not read it at all. I do not have problems when connecting it to my former computer (PC) and a Mac from last year. Any suggestions?

    Thanks,
    Yes, I did that. They have uppgrades for the dongles, but just untill Mac Os 10.7. Their solution is to buy a new modem from them or getting one for free if I sign a contract for 24 months! So, i think from that side not very helpful.
    It is just that I do not want to buy a new modem, when it works in quite recent computers and after having spent money in the new Mac.
    But thank you for your reply!

  • I cannot find my question from last night. I saw the instruction from jscher2000 but I find nothing like what he decribes.

    I cannot find my question from last night. I saw the instruction from jscher2000 but I find nothing like what he decribes. My question was "Firefox 22 worked on Windows 7 but 23 does not"

    hello MLP99, you can find your prior questions & answers under this link (once you're logged into support.mozilla.org with your account): https://support.mozilla.org/questions?filter=my-contributions

  • HT1414 My daughter tried to upgrade her ipad, received as a gift from last year, with ios 7 last Saturday a.m.; since then she couldn't turn it on. I tried to follow your steps to recover it but wouldn't work(&don't have recovery disc). What do I do now?

    My daughter tried to upgrade her ipad, received as a gift from last year, with ios 7 last Saturday a.m.; since then she couldn't turn it on. I tried to follow your steps to recover it but wouldn't work(& I don't have recovery disc available). What do I do now?

    Try using another computer. I had the same problem, repeated the given solution many times and each time it failed. Then I connected ipad to another computer and it worked immediately. Then I used the first computer to restore a backup.

  • Old threads from last years appear in the iPad forum

    When viewing the iPad forum on the iPad old threads from last year populate the threads listings. I used different browsers on the iPad besides Safari (both logged in and out) and it still happens. I haven't tried using Safari on OSX . Can someone please check this out using the iPad and OSX to see if they are experiencing the same thing. This started happening yesterday...

    +Watch the movie CATCH 22 for the definition of what normal means... there isn't any.+
    I will try to find it; your comment made me curious enough to google and now I know why no one has ever referred to me as being "normal".....
    +Definitions of normal on the Web:+
    +* conforming with or constituting a norm or standard or level or type or social norm; not abnormal; "serve wine at normal room temperature"; "normal diplomatic relations"; "normal working hours"; "normal word order"; "normal curiosity"; "the normal course of events"+
    +* in accordance with scientific laws+
    +* +*being approximately average or within certain limits in e.g. intelligence and development;*+ "a perfectly normal child"; "of normal intelligence"; "the most normal person I've ever met"+
    +* convention: something regarded as a normative example; "the convention of not naming the main character"; "violence is the rule not the exception"; "his formula for impressing visitors"+
    +* forming a right angle+

  • CS6 AE crashing on opening files from last year (2012)

    My comps from last year will not open now, and crashes AE when I go to open them. Plugins and AE seem all up to date. Would anyone know what might be causing this??

    Currently using the latest CS6 AE v11.0.2.12 on a Win7 Professional service pk.1 64 bit. My system has 2 processors: intel xeon cpu E5-2609 0 @2.4GHz with 64 GB RAM  500GB SSD as local disk and 2TB hard drive.
    The footage in the comps I am trying to open are .r3d files that have RedGiant effects applied (primatte key used mostly).. the error I am seeing in AE when it crashes on opening the comp is error:error4 in Edge Blur(25::241)
    These comps opened fine when I was working on them last year, but now when I open a fresh AE and load any one of my saved files AE crashes and will not display the footage. I can open AE and start a new comp, but it is only when I open one of my saved files where it crashes.
    Thanks for the help.

  • Hi, how do i transfer dates on my calendar from last year to this?

    Hi how can i transfer dates on my calender from last year to this?

    Dbl click on the event and choose Edit. Then Repeat>every year.

  • I want to restore a back up from icloud from last year but it has disappeared! can i recover older backups?

    I want to restore a back up from icloud from last year but it has disappeared! can i recover older backups?

    No, once removed, backups cannot be recovered.  Also, Apple will remove backups after 180 days of inactivity, which sounds like what happened here.

  • Mavericks install failed on my late 2008 MBP. Says I should contact the software provider. Want to do a system restore, using Time Machine, but latest date to use is from last year - even tho did a backup before the download?

    I downloaded the free Mavericks upgrade to my late 2008 MBP on Friday.  I made sure to plug in my external hard drive so that Time Machine could back up beforehand.  (I should say I'm not clear about the different kinds of backups that Time Machine does - I just plug it in and let it go.).
    So have tried several times over the weekend to install, it takes 46 minutes each time - only to tell me it can't do it.  There was an error message of needing to contact the software provider (or something similar).  After searching the internet (on my husband's computer - since my MBP is rendered useless right now) I decided maybe I should wait on Mavericks and just do a system restore.  However, when I plugged in the Hard Drive and proceed to System Restore, the latest date available is one from September of 2012 (14 months ago)...  I've wondered if the date might be wrong?  But I'm afraid to choose it because I'm not sure what I would lose.  It might take me back to Snow Leopard rather than Lion... (however, the version on Restore was 10.8.1 which is Mtn Lion, right?  Even tho it was last year...)
    Some sources online say that I should go into applications and delete the install -- but I can't get to anything on my computer. 
    I tried to do a reboot in safe mode - but not sure if it worked... 
    I did look on the installer log error and the latest error is: 
    Local Host  Report crash [378]
    Can anyone help me?  (Using simpleton, non-techie language?
    Thanks

    I downloaded the free Mavericks upgrade to my late 2008 MBP on Friday.  I made sure to plug in my external hard drive so that Time Machine could back up beforehand.  (I should say I'm not clear about the different kinds of backups that Time Machine does - I just plug it in and let it go.).
    So have tried several times over the weekend to install, it takes 46 minutes each time - only to tell me it can't do it.  There was an error message of needing to contact the software provider (or something similar).  After searching the internet (on my husband's computer - since my MBP is rendered useless right now) I decided maybe I should wait on Mavericks and just do a system restore.  However, when I plugged in the Hard Drive and proceed to System Restore, the latest date available is one from September of 2012 (14 months ago)...  I've wondered if the date might be wrong?  But I'm afraid to choose it because I'm not sure what I would lose.  It might take me back to Snow Leopard rather than Lion... (however, the version on Restore was 10.8.1 which is Mtn Lion, right?  Even tho it was last year...)
    Some sources online say that I should go into applications and delete the install -- but I can't get to anything on my computer. 
    I tried to do a reboot in safe mode - but not sure if it worked... 
    I did look on the installer log error and the latest error is: 
    Local Host  Report crash [378]
    Can anyone help me?  (Using simpleton, non-techie language?
    Thanks

  • I need to see an important iCloud email from last year, but it's not in my inbox

    I Need to read an important email that was sent to me last year. But after a couple months the read emails disappear from my inbox. Is there still a way to read it again. The email provider I use is @icloud.com

    Hello JessMarSmi,
    Thanks for using Apple Support Communities.
    Email messages in your iCloud Inbox will not be deleted automatically.  If you need to search for an email you received, you can do so by tapping in the Search field at the top of your Inbox in Mail.
    Write messages - iPhone
    Take care,
    Alex H.

  • Year ago,  percentage of change from last year for a measure

    Hello Experts,
    I have a report which has year column and sales, revenue, profit and they are asking me to give a percentage of change of sales from the last year. Could you please help me how can i get it and the syntax for that. Please advise.
    Thanks,
    RC
    Edited by: user1146711 on Dec 14, 2011 8:32 AM

    Hello RC,
    You can use the AGO function to calculate the previous year figure.
    This topic explains how to achieve it. the most important think here is that you must have a proper time dimension with a propoer chronological key.
    http://obiee101.blogspot.com/2008/11/obiee-ago-and-todate-series.html
    After will be able to compare the figures.
    Regards
    Adil
    NB: please assign point if it's helpful

  • I have Illustrator CS3 installed.  When I click on a save document from last year, I get a message that I cannot use this product, contact administor or Adobe.  What do I do?

    I have Adobe Illustrator CS3 installed on my Windows 7 computer.  I created art last year.  I clicked on it today to modify it and use it for my holiday card.  I got a message that I am not allowed to use this product and must contact my administrator or Adobe.  I am the only user of this home computer and the administrator.  Why can't I use the program and what do I do?  It mentioned uninstalling it and reinstalling it.  Is that what I have to do?  I can't seem to contact Adobe directly anymore.

    You have not provided the exact error message (including any numeric codes). From the looks of it this sounds like the licensing system simply failed and indeed a reinstall is the only proper way to fix it. run the cleaner tool and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Download CS3 products
    Mylenium

  • HT1904 hi guys im not memeber with zooks from last year, i got overcharged from u  need to refuend

    hi guys i stop zooks from jan this year and im not a member anymore with them , and u overcharged me this morning 109.99
    can u refund the money pls
    thanks 

    You're not speaking with Apple when you post here. These are user-to-user support forums. So no one here can make any refunds.
    As to your question, did you unsubscribe from Zooks via this procedure?
    http://support.apple.com/kb/HT4098
    If you didn't, then you didn't cancel, you just stopped using the app. Your subscription, however, continued and apparently automatically renewed. You first need to cancel the automatic renewal. After that, whether you can get a refund I don't know, since the official terms of sale is that all sales are final, but you can go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to report the issue to the iTunes Store and ask.
    Regards.

  • Asset retired/deactivated in current year pending adjustment from last year

    Hi Guru's,
    My user have one adjustments to do from previous fiscal year.
    As we have some invoices in which we can do direct payment in Non-sap and for information purpose we enter the transaction in SAP. My user did a goods receipt in MIGO but have not created any invoice for the Vendor and done the payment. Now when I run MIRO with material document  and PO, it is giving me message " You cannot post to this asset (Asset XXXXXXXXXXX deactivated)".
    Note: Now the above asset X was retired current year and balance was carried forward to another Asset Y .
    Option1. I tried activating asset in AS02 but it is in display mode. From where I can make it optional mode, plz give me the t.code.
    Option2. While posting in MIRO, is it possible to change the Asset X to new Asset Y.
    or if you have any other option please let me know.
    Your help will be highly appreciated
    Kind regard
    LS

    Hi Viswa & Siva,
    Thank you very much guys for your quick reply.
    The problem is not solved yet.
    Viswa - In 2. Posting Information - FG 12 Deactivation is already flagged as Optional, MnNo. is ticked, Sbno. is ticked.
                                                           FG 13 Planned deactivation is flagged as Optional, MnNo. is ticked, Sbno. is unticked.
    So this is not helping me out, am I missing something?
    Siva -  I tried again in MIRO, I am not able to change asset number. It is greyed out.
    Please let me know what should i do?
    Thanks
    LS

Maybe you are looking for

  • Problem migrate zones solaris 10

    Hi, i'm trying to migrate one non-global zone from one machine to another machine. The steps I have followed are: 1) On the machine where I have the zone that I want to migrate: # zonecfg -z myzone export -f /myzone.cfg # cd /export # find zones/myzo

  • What is the best way to get the UID of any selected page item (frames, rectangle etc)?

    I need UID of any selected item on page and also array of UID's in case multiple selection happens. How can I achieve it? One way I know is to write an observer and attach it on every new page Item created, but that way the system might become slow a

  • Communication Channel marked all files as being read on FTP

    The Mailbox FTP has all the files flagged as being read when a single file is read through a communication channel.  I manually unflagged the status field so all files had a status of N so none were pulled.  I had 14 files for this test flagged as N.

  • Transaction code required

    Hi All,         Can you please tell me the transaction code for the following : (a) Mini Applications (b) Checkpoint Group (c) Authorization objects (d) Logical database (e) Area Menus (f) Work Flow Standard task (g)Work Flow Standard Roles (h)Work F

  • What do i put in the Incoming Mail Server...?

    I have Road Runner and I dont know what to put in the Incoming Mail Server box...any ideas...?