Stupid hourglass glass is constantly flashing - Np e-mails coming in - Help!

Hourglass symbol is constantly flashing and I can't receive any e-mails. I had a App error 523 and reset and all message came flooding in but now I am back to where I started. Hourglass flashing and I am not receiving any messages. I tried taking out the Micro card but it made no difference. I haven't installed anything new in weeks.

Greetings, and welcome to the BlackBerry.com Support Forums.
Have you recently upgraded the device to OS 4.5? If so, you might look at this solution to Media Card constant scanning.
If you have not recently upgraded, what is your file free listed, at Options > Status?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

HT3180 My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

My apple tv box no longer turns on, the white light constantly flashes on and off but no signal to my tv. All devices still pick up airplay but not actually playing. Restoring the box has made no difference, any clues?!

Was the restore done via iTunes?
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US
If so then you may need to take it to Apple.

Can't open "special characters" in any Edit menu; have a constantly flashing empty window labelled 'characters' that i can't stop. window flashes then disappears every time i click on anything. any suggestions? tru thanx !

i can't open "special characters" in any Edit pull down menu. i have a constantly flashing empty window labelled 'characters' that i haven't been able to stop.
it appears every time i click on anything. any suggestions? tru thanx

I, too, have found Bridge very unstable. I find this to be extremely disappointing, seeing as it's literally the most expensive piece of software I've ever purchased for personal use. I've seen these two symptoms:
1. When running in full screen mode, Bridge crashes periodically. This happened on Vista, so I blamed Vista (of course), but even after regressing to XP SP2, I see the same symptoms.
2. Although I didn't see this on Vista, running on XP I see the problem described earlier in this thread, where clicking on a thumbnail displays the wrong image preview. When this happens the image displayed is one from a different folder! I solve the problem by clearing the cache, and it's OK for a while, but the problem keeps returning.
3. Even when exiting cleanly from Bridge (using File->Exit), Bridge often forgets where I was working in my previous session. I need to re-navigate from the very top level directory down through the hierarchy to my photo directory.
Again, it's very disappointing to invest so much in a single software package only to see such basic operations malfunction.

Spotlight icon constantly flashing

Hi!
My spotlight icon is constantly flashing
and most of my Apple aps, plus my preferences
don't work anymore.
All I did was to trying to follow this suggestion to fix a QT issue:
Re: Workaround for 7.1.6 video freeze (audio continues)
Posted: 2007-06-08 16:16 in response to: Sailhome
Click to reply to this topic Reply email Email
I figured out a way to reinstall QuickTime 7.1.5.
1. Download Quicktime 7.1.5 installer:
http://www.apple.com/support/downloads/quicktime715formac.html
2. Mount the installer package. This is very important.
3. Download and install Pacifist from this location:
http://www.charlessoft.com/
4. Run Pacifist. In its dialog press the "Open Package" button. Browse for the .PKG file in the mounted package. In the appearing list Right Click on the .PKG and from the context menu choose "Install To Default Location". Please note that if you mistakenly select the unmounted .DMG file into Pacifist instead of the PKG, there will be an installation but without an effect.
5. Check in the "User Administrator Privileges" checkbox. Press Install.
6. When asked tell the installer to replace the already existing files. Do this with all the files.
7. When the install process is finished restart the computer.
8. Run the QuickTime 7.1.5 installer package again WITHOUT Pacifist and let it install the files again.
9. Restart the computer
Courtesy to:
http://www.archicadwiki.com/Bugs/QuickTimecrash_on_MAC_OSX10.3

loumel
First question: why did you apply a fix for a PPC 10.3.9 issue to an Intel 10.4.9 machine.
From the link you supplied:
Problem
ArchiCAD 10 crashes after a few steps on MAc OS X 10.3
Mac OS X 10.4 is not affected. ArchiCAD version 9 and earlier are also not affected.
Cause
QuickTime version 7.1.5 is installed on MAC OS X 10.3. QuickTime 7.1.5 is offered as part of the Automatic Software Update.
Solution
New solution: In QuickTime version 7.1.6 the problem is solved!!!
Note that whatever problem you were having on 10.4, it was not this one: Mac OS X 10.4 is not affected.
The problem now is that you have damaged your system. Some things to try:
1. Re-apply the Quicktime 7.1.6 update.
2. Re-apply the 10.4.9 updates.
If these don't work, you will need to consider an Archive and Install of the OS.
Regards
TD

Problem burning red led constantly flashes

Hi all this is my first post in this forum....( NEWBIE )
as mentioned in subject Problem burning red led constantly flashes then I recieve a message " error reading data"
the dvd burner is a MSI ms 8404a. using Nero6 and princo DVD -R Win XP-PRO
I have had no problems in the past burning with this media and I'm halfway through a stack of 50...
I dont have any other media here atmo so any help would be great..
Also upgraded firmware with msilive although it said I had the current version..
Cheers in advance ROB
Ok just burnt a cd using nero6 while burning the red led flashed costantly, when finished cd ran perfectly ....??? anyone want ABBA GOLD??
Im sure as that when I used to burn DVD's the red led was solid not flashing....H E L P ....!

I don't understand why the light would be solid and not flashing when burning.
If this is a common problem, it's a problem for me because i'm about to order two MSI DR16-B DVD-RW drives, tell me, is this the drive you have in your system? The one with the problem?
If so i could use some advance warning of the problems i might face.
The previous post is correct, make sure that your Operating System hasn't put the drive into PIO mode, it should be UDMA Mode 2 at least.

Battery indicator constantly flashing

The LED battery life indicator on the back of my iBook's battery is constantly flashing a single dot. This happens wether or not I have pressed the button on the battery and even when the battery status in the menu bar reads a 50%+ charge (shouldn't it be showing at least 2 dots).
Why won't it stop blinking? Why don't the lights match up with what is shown in the battery status indicator in the menu bar?

How old is the battery, and how long does it last when you run from it? Does it flash even when running on the adapter?
Normally, one flashing light indicates a dead battery. Sometimes when the battery gets old, the status of the battery charge percentage does not read correctly on the iBook's battery status indicator.
Sometimes calibrating the battery will make the battery status indicator reflect a more accurate picture of your battery status.

Screen constantly flashes when loading flash site

Hi,
I have a sparadic problem, i have been told that occasionally
when the site is loaded the entire page will constantly flash until
refreshed. The problem is on both Mac and PC, and on Firefox, IE
and Safari, which leads me to believe there is a bug, or something
i am doing in the code. It has happened on 2 sites,
www.charlesward.com and www.djhdesign.com
If anyone else has had this problem please let me know if you
found a solution. If anyone is willing to help i can send you the
.FLA.
Thanks for any help,
Pat

patbegg wrote:
> Hi,
> I have a sparadic problem, i have been told that
occasionally when the site is
> loaded the entire page will constantly flash until
refreshed. The problem is on
> both Mac and PC, and on Firefox, IE and Safari, which
leads me to believe there
> is a bug, or something i am doing in the code. It has
happened on 2 sites,
> www.charlesward.com and www.djhdesign.com
> If anyone else has had this problem please let me know
if you found a
> solution. If anyone is willing to help i can send you
the .FLA.
Hi Path
It does it for me too, not an entire page by loaded images.
My guess is that your
preloader loop action has problem. After loading goes to
frame and comes back to the
loader frame. Perhaps no stop action on the frame where image
is ? There is for sure
a loop, you need to place stop action somewhere and all
should be ok. Beside that
nothing else seem to be making problems.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

BT HH4 constantly flashing orange

We are new BT customers and had our line put up a week ago by a BT engineer. Phone line working fine but the HH4 starts up green then constantly flashes orange. Just will not connect to the Internet. We have made countless calls to BT who seem to just not have a clue and tell us they have tested the line. That it should settle in 24hrs then 3days then a week and STILL the orange light is flashing! We borrowed an old hub from a friend and that works but it is extremely slow. We are starting to wish we never bothered. Can anyone help as BT seem to be completely useless. Please can a mod contact us?????

can you please run the further diagnostics part of the BT speed test this test appears after the first test completes http://speedtest.btwholesale.com/
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

My dad got me a MacBook Air for my birthday but he used it a few times before he gave it to me. He doesnt remember the user password that he kept and now i cant download adobe flash player in it. Please help me!

My dad got me a MacBook Air for my birthday but he used it a few times before he gave it to me. He doesnt remember the user password that he kept and now i cant download adobe flash player in it. Please help me!

Reset Password using Recovery HD
OS X 10.7 Lion /10.8 Mountain Lion
Follow the instructions in the first and third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
I don't remember my original (former) account password
https://support.apple.com/kb/HT1631

I can't install the new flash player on mac can you help me please??

i can't install the new flash player on mac can you help me please??

Yes I can, but...
Click >About This Mac and let me know what OS version you're using.

I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

I just bought an AirPort Extreme system over this weekend and I am having problem with setting it up. I plugged the cable as explained in the manual but there is no way I can get a steady green light. I all see is flashing amber light. Can anyone help me,

Think you need to provide some more details about what you are connecting

I need help with my shockwave flash it is crashed i need help fixing

I need help with shockwave flash it is crash i need help fixing it

http://forums.adobe.com/thread/1195540

I cannot not turn off my ipad or on there is a small circle flashing on the screen can anyone help?, I cannot not turn off my ipad or on there is a small circle flashing on the screen can anyone help?

I cannot not turn off my ipad or on there is a small circle flashing on the screen can someone help?

Try holding the power and home buttons for ten to fifteen seconds until the apple appears. If still bad, try a restore from within the computer&itunes.

I need to run web based Microsoft CRM. I open it in Safari but the program does not respond. I suppose it has to do with Flash or ActiveX. Can someone help?

I need to run web based Microsoft CRM. I open it in Safari but the program does not respond. I suppose it has to do with Flash or ActiveX. Can someone help?

What does the product developer say about system requirements? If it needs to be run from within Internet Explorer then you'll need to find a way to run Internet Explorer. Boot Camp or VM installation of Windows would be two options.
But first check the product requirements.

HT204325 What can I do my mac 27 inch is showing circle and apple logo flashing also bleeps twice can anyone help pls

Apple Mac 27ich not loading up got a circle and apple logo flashing then makes two bleeps sound
What can I do my mac 27 inch is showing circle and apple logo flashing also bleeps twice can anyone help pls

Mac computers- About startup tones - Beeps
Intel-based Mac Power On Self Test RAM error beeps

Stupid hourglass glass is constantly flashing - Np e-mails coming in - Help!

Similar Messages

Maybe you are looking for