Stupid question about the timeline
Hey all,
Having a Monday morning brain cramp and can't find this anywhere, but does anyone know if there is a way to stop the timeline from doing a continuous playback...so that when it gets to the end it just stops and doesn't go back to the beginning?
Thanks,
Jonathan
D'oh! The one place I didn't check...the "view" menu. Looked in the preferences, tried the manual (guess I didn't enter the right keywords). Points on a first-post basis.
Dee dee dee!
Jonathan
Similar Messages
-
Question about the timeline.
Hi,
i realise a little animation with Edge animate, and i ask me:
how realise a controll of the timeline like this site:
http://www.rleonardi.com/interactive-resume/
Thanks !Thank you, i check this.
A other question..
In this animation, he controls with the scroll or with the arrows, but at each moment, the animation continue (when the skills appears for example).
How did he do that ? -
A stupid question about the new mac pro
I know the mac pro has dual ethernet ports, but does it also have wifi built in? Or do I actually have to plug it tonto my router? Sorry for the perhaps obvious question.
PS. As a point of interest, I received mine yesterday. There was NOTHING inside of the box except for the cpu. I know the docs will be already installed on the cpu along with my purchase of Final Effex Pro X. It just took me by surprise is all. Now my next problem is trying to take my time and relish the exciting setup today. Unfortunately, I have compression fractures in my lower back from this last snow storm, so my enjoyment will be bitter sweet.
Thanks for you help.
---jerryFrom the product page (http://www.apple.com/mac-pro/specs/):
Wireless: 802.11ac Wi-Fi wireless networking;3 IEEE 802.11a/b/g/n compatible
and
In the box: Mac Pro, power cord
So, yes, it does have Wi-Fi. However, you are likely to get better local network performance with a gigabit ethernet cable and a gigabit ethernet switch (assuming you have other local gigabit devices similarly connected).
For many years, Apple has been cutting down on the amount of hardcopy documentation shipped with products. Two years ago, my MacBook Pro came with a tiny booklet that was little more than how to plug it in and turn it on, an equally tiny warranty booklet, and some logo stickers. I'm only a little surprised to hear they are now down to zero paper shipped. -
Stupid question about the layn
How the heck do you hook it to the unit'sThanks
Hmmm... I've got a Zen Micro, MicroPhoto and MuVo TX FM, but not a Zen V Plus. :|
Maybe it'll use a similar procedure. This is for the Zen Micro. The Zen V Plus is probably a little different.
? scroll to FM Radio
? select the Menu [on the Zen Micro, it's the the lower right button]
? select Autoscan [you might have to select Yes to start it]
? Autoscan will save the strongest 32 stations it finds in in your location
? scroll through the presets it finds to chose your stations
? you can also manually run through the FM frequencies to find your stations
? if you want to save a station, click the Menu, select Save As Preset
? you can also delete Presets from the Menu
I usually hit Autoscan and then delete the ones I don't want. You can name the presets through the Menu too. -
Short question about the nano controls
Hi. I'm probably going to buy a 4Gb nano today, but first I'd like to ask a short question about the << >> buttons on the click wheel.
I read in a forum that the << & >> buttons are actually 'skip' buttons (only used to play the previous or next song respectively), and that it's impossible to rewind or fast-forward within the track you're listening to. This is extremely important for me as I have several 2-3 hours mp3, and I need to be able to access different parts of the file quickly (eg. not having to actually wait 1 hour to listen to my favorite part). I found this to be an important feature, and I can't believe Apple hasn't thought about it.
Anyway, I've never used an iPod, that's why this question may sound plain stupid.
Thanks for you replies!The iPod fast charges to about 80% and then trickle charges the rest of the way to prevent damaging the battery/iPod. A full charge takes more than an hour or two though the battery indicator will show full. The best way to tell if a full charge has occurred is to unmount the iPod from the computer but keep it connected. The screen will show an animation of a battery. When the animation stops the battery is fully charged.
Also, as your battery discharges the indicator will eventually show red indicating the battery is about to run out...in an hour or two. After you've owned your iPod for a couple months you'll figure out how much time you have left when the indicator turns red - it depends on a number of factors including play volume, equalizer use, etc. In real world use I'm getting over 11 hours.
The headphones are...average. If they didn't hurt my ears I'd find them acceptable for my pop music but not so acceptable for acoustic and symphonic nor music with booming bass - because they don't boom the bass.
I encode the majority of my music at 256 AAC and I've noticed no distortion caused by the EQ. This, plus your complaint about the earphones, leads me to think perhaps you got a bum set of phones. Borrow a pair from someone else and see what happens. -
Re: Question about the Satellite P300-18Z
Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it. -
A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql
Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
SELECT sid, serial# INTO :mysid, :myserial#
FROM v$session
WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
:MYSID :MYSERIAL#
129 1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
SELECT prev_sql_id INTO :saved_sql_id
FROM v$session
WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER SQL_ID SQL_TEXT
0 9babjv8yq8ru3 BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al -
Questions about the Apple Developer Enterprise Program
Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!Google: MDM
-
Some questions about the integration between BIEE and EBS
Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps -
Two questions about the new iWeb
Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanksAh well... thanks for the quick answer
Message was edited by: Guðlogi -
Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.
Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with. -
Question about the DB adapter
ns2006.0.7
Question:
It seems that we can only have 1 db adapter, but in the adapter defiition we have to specify the database. If I want to communicate to several different databases on different platforms, Oracle / SQL I need to install a DB adapter for each database connection.
I can't figure out how to add a second DB adapter, does anyone know how?
Thank you
Daniel
Safeway Inc.Hi
We're new at developing our own agents etc. We've leveraged the supplied DB agent and written the relevant adapter, however we're struggling with the transformation.
Could I be cheeky and ask if anyone would be willing to share a transformation they have written for the DB adapter? Unfortunately no-one in our team has had past XML experience, so we're trying to backwards engineer from examples.
Thanks, Meghan -
Question about the ability of Genius Bar to help with outside software...
Hi I wasn't sure where to put this, but here's my question. I'm having a problem with the Sims 2 on my Macbook and I was wondering if I go to the Genius Bar will they be able to help me or are they strictly hands off when it's not a direct Apple product?
Also, I bought an external hard drive in the Apple Store but it's not an Apple branded product. If I'm having a problem with that, can I go to the Apple Store?If it's a question about the installation, system requirements or compatibility with your MacBook, the Mac Genius can probably help. If you're having some kind of issue while using the Sims 2, you'll probably have to contact .
The same is true with the hard drive. If you need some help getting it connected or even formatted, they can probably help. However, if it's not powering up or you're losing files or some kind of operational issue with the hard drive after it's connected, they'll probably refer you to the manufacturer.
Usually Apple can't support other vendors' products. Someone here may be able to give you some more advice, since none of us work for Apple. There may be someone here who's already had the same issue with the Sims.
-Doug -
Question about the programming of a legend
Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb 65 KB
new_legend_test.llb 65 KBHi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi 85 KB -
I want to question about the official service at the service center of Sony.
I want to question about the official service at the service center of Sony.
long since I like the models and items sony. from start playstation, cameras, camcorders up, I've ever had. and a new camera that I bought two years ie compact cameras Sony Cybershot DSC H200. as of a month ago, a camera was having problems in lenses that would not close. and setting the automatic mode to move by itself. I came to the Sony Service Center in Makassar, precisely on Jl. Shop Pengayomann A5 / 05 (0411) 442340.
operator initially said only two weeks to work on my camera. but this week has been more dau even want to go in a month tomorrow, dated July 9, no news from the service center. and I kept the call to the office service. as well as assorted reasons. there are no spare parts or technical constraints, and the last one I call to his office, he said the factory spare part is damaged. imported directly from Singapore. I think, ko new spare part it can be damaged before using that? how the quality of this Sony spare part? ugly? not good? why?
I was disappointed with this situation, where soon it will Eid, want to return home as well to Java. but the camera has not been settled workmanship?
nah, roughly what is the solution of the Sony plagued with this problem? please help, because he did not know to whom to complain. operator had just said: it's up to the father alone.
once again I asked for his help. solution. if you can before Eid arrived.
Thank you,
AD. RusmiantoHi awwee107,
Welcome to the Sony Community!
We have forwarded your query to the relevant team for their further assistance and someone from local CC will contact you.
Thanks!
Maybe you are looking for
-
Can't install Flash Player. Windows 7 IE 10
Suddenly Flash player doesn't work and I can't install it at all. Deleted all other version and tried re-installing. No go. Troubleshooting info on Adobe site no help.
-
Links lost when exporting to INX file in CS4 for Mac.
I am working with a remote designer who is still in InDesign CS3, but I have CS4. We are both using Macintosh computers. When he emails me a CS3 file, I open it and it converts to CS4, and the links all seem to be just fine: They're missing, because
-
Active my ipad emei *********. please!
active my ipad emei **********. please! <Edited by Host>
-
Hello Experts , We faced major issue on our production server and after reboot server came to normal operation. The issue is Solaris unable fork any new process, whatever the command we gave and got "fork: Unable to fork new process". We need answer
-
For good and very valid reasons I had to erase my hard disk and reinstall 10.2 and then the upgrade to 10.2.8. I diligently copied everything to another hard drive first, however . . . Now I cannot find any of my old mailboxes, all preferences, bookm