Stupid question - What platforms does Solaris x86 run on?

Hello,
I am a longtime Solaris for sparc user. Could someone please direct me to information about what platforms/processors Solaris for x86 runs on? Are there dual-bootable Windows/Solaris systems or something? What about laptops? I will start searching myself for info, but if anyone knows of a great strehouse of info on this matter, I would appreciate it.
Thanks!

solaris: get it free
http://www.sun.com/software/solaris/get.jsp
What platforms does Solaris x86 run on? not such a stupid question if one is to inquire, does it run on intel conroe chips, yonah? are both chips recognized, does it run at 64 bit on conroe? has anyone got it going on mac? how about the 4 proc intel chips released. any one tried this and last but not least xen virtualistion with new built in amd/intel virtualization technology...

Similar Messages

Can I get a 'timetable' of what labview does when it runs the program?

Can I get a 'timetable' of what labview does when it runs the program? i.e. how long it spends doing each sub vi, and what order it does them in.
Cheers
Solved!
Go to Solution.

Execution Trace Tool kit is an add-on. If you don't have it your pack of disks, ... maybe try a demo version?
NI Spy get loaded with LV (or one of those things).
Start >>> Programs >>> National intruments >>> NI Spy ?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

FAQ: What OS does Photoshop Elements run on, or Will PSE run on my computer?

There are many different combinations of Photoshop Elements (PSE) and the Operating Systems (OS) it is supported on. Here is a table to help identify which versions of PSE are supported on which versions of Windows and Macintosh. By "supported", we mean that the application is designed and thoroughly tested to work on. Just because a platform is "unsupported" does not necessarily mean that it will not work. What it does mean is that you operate the application on that platform at your own risk. In most cases, a version of PSE is "unsupported" on a specific platform simply because it was released before that version of the OS.
The minimum system requirements (including supported platforms) for the current version of Photoshop Elements can be found here: http://www.adobe.com/sea/products/photoshop-elements/tech-specs.html
The minimum system requirements for all previous versions of Photoshop Elements can be found here:
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop-elements.h tml
Version of Photoshop Elements
Windows XP
Windows Vista
Windows 7
Windows 8
Mac OS 10.4.x
Tiger
Mac OS 10.5.x
Leopard
Mac OS 10.6.x
Snow Leopard
Mac OS 10.7.x
Lion
Mac OS 10.8.x
Mountain Lion
Mac OS
10.9.x
Mavericks
Photoshop Elements
X
Photoshop Elements 2
X
Photoshop Elements 3
X
Photoshop Elements 4
X
X
Photoshop Elements 5 †
X
X1
Photoshop Elements 6
X
X
X
X
Photoshop Elements 7 †
X*
X
Photoshop Elements 8
X*
X
X
X
X
X
Photoshop Elements 9
X*
X
X
X
X
Photoshop Elements 10
X**
X
X
X
X
X
Photoshop Elements 11
X**
X
X
X
X
X
X
Photoshop Elements 12
X**
X
X
X
X
X
X
* - Requires Service Pack 2 or later
** - Requires Service Pack 3
# - Minimal product testing has been performed on this OS. No issues are known to exist.
## - The Comic Book Filters (Filter > Sketch > Comic/Graphic Novel/Pen and Ink) will cause Elements 11 Editor to crash on Mac 10.9.
1 - Requires the 5.0.2 update
† - This version not available for Mac OS
†† - This version is designed to operate on a PowerPC-based computer. Starting with 10.4, the Mac OS supported both PowerPC and Intel processors. Continued support of PowerPC-based applications on Intel-based computers was made available through the use of Rosetta. In version 10.6, the Mac OS no longer supported PowerPC processors. Starting with version 10.7, Rosetta was discontinued, PowerPC-based applications no longer operate on this or later versions.
[NOTE: Photoshop Elements versions 1-3 ran on earlier version of the Mac OSX platform. For brevities sake, I've only included the 6 latest versions of that OS.]

Alejandro Jimenez
For Premiere Elements System Requirements for versions 13 to 8 and the older versions, please see the Adobe Document
System requirements | Adobe Premiere Elements
Regarding what versions will or will not work on certain operating systems...I would question even your Photoshop Elements FAQ reference.
What Adobe has not tested is not the same the impression that the program does not work on a certain operating system it has designated as " - ".
I have not seen a Premiere Elements document comparable to this FAQ document that you present for Photoshop Elements.
I have found no problem installing and running Premiere Elements 4, 7, 8.0/8.0.1, 9.0/9.0.1, 10, 11, 12/12.1, 13/13.1 on Windows 7 Professional SP1 64 bit or Windows 8.1 64 bit.
The version updates, if available, should be used to give special obvious features as well as other less obvious ones.
In the case of the current version, Premiere Elements 13/13.1, Windows XP, Windows Vista, and OSX 10.7 are not supported. Interestingly, I have found that you can
download the Premiere Elements 13 tryout from Adobe to a Windows XP computer, but you cannot install it.
Also, on a comparative basis, Premiere Elements version 32 versus 64 bit application
Windows
Premiere Elements 10, 11, 12, and 13 are 64 bit applications only when they are specifically on Windows 7, 8, or 8.1 64 bit computer.
Premiere Elements earlier then 10 are 32 bit applications whether they are run on Windows 32 bit computer or Windows 64 bit computer.
Mac
Premiere Elements 9 was the first version to be offered for Mac as well as Windows.
Premiere Elements Mac was not available as a 64 bit application until version 11 - and with Mac 64 processor.
Miscellaneous
Premiere Elements as a 32 bit application will block you from importing still images beyond a certain total pixel count.
Lots of other details, but let us start with these.
Please let us know if you need clarification on any of the above.
ATR

What rights does AD MP Run as account need on 2012R2 DC's?

Hi!
My AD-guy has installed new DC's running Windows server 2012R2, and now SCOM is having trouble monitoring AD, DNS and DHCP. I will now create an account to use in monitoring AD. My question is:
What rights does this Run as account need to successfully monitor 2012R2 DC's. In my environment use of Domain Admin is serverly restricted - do I really need domain admin rights to monitor an 2012R2.
I'm alos having touble using Local System with agents on 2012R2. Is there a restriction here? What rights should an action account have on 2012R2 servers? I get a lot of errors saying that teh agent need "rights to log on locally".
Any help apprecited.
Best regards Rune Haugen

Hi Rune,
Please look at these posts:
http://adinermie.wordpress.com/2014/02/26/scom-agent-grayed-out-when-trying-to-monitor-domain-controllers/
http://blogs.technet.com/b/kevinholman/archive/2009/02/20/getting-and-keeping-the-scom-agent-on-a-domain-controller-how-do-you-do-it.aspx
As well, check this post in case if your agents are installed manually:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/5a64e774-3f14-4ecc-93ea-f36db59a4b07/adding-the-active-directory-helper-object-oomads-to-dc-servers?forum=operationsmanagerauthoring
Natalya

Dumb Question - what exactly does "Static" mean

What exactly does static variables and methods? What are they for?
I know "final" means once you set it that's it..but what does static mean?

There is also a static block use for initialising static variables.
If you look in c:\j2sdk1.4.???\src.zip you will find the source to the libraries.
from com/sun/image/codec/jpeg/JPEGTable
public class JPEGQTable {
     /** The number of coefficients in a DCT block */
     private static final byte QTABLESIZE = 64;
      * This is the sample luminance quantization table given in the
      * JPEG spec section K.1, expressed in zigzag order. The spec says
      * that the values given produce "good" quality, and when divided
      * by 2, "very good" quality.
     public static final JPEGQTable StdLuminance = new JPEGQTable();
     static {
          int [] lumVals = {
               16,   11, 12, 14, 12, 10, 16, 14,
               13,   14, 18, 17, 16, 19, 24, 40,
               26,   24, 22, 22, 24, 49, 35, 37,
               29,   40, 58, 51, 61, 60, 57, 51,
               56,   55, 64, 72, 92, 78, 64, 68,
               87,   69, 55, 56, 80, 109, 81, 87,
               95,   98, 103, 104, 103, 62, 77, 113,
               121, 112, 100, 120, 92, 101, 103, 99
          StdLuminance.quantval = lumVals;
     }

ZFS Configuration Question - Also posted in Solaris x86

Hello,
I have 2 x 140GB (hw Raid-0 + spare). About 20GB is allocated to Solaris on UFS (standard installation and partitions/slices).
I would like to allocate the 120GB left on the disk drive to ZFS. That space is not unallocated to any file system for now.
I found a lot of documentation of how to create a ZFS Pool on an empty disk drive. The documentation is less clear on how to do it on a drive already use by another FS.
Any help will be appreciated.
Michel

Darren,
I just setup another Solaris x86 server tonight to play with. That future production server is in it's own vlan wtih no Internet access for now.
The test server has the same configuration, but less disk space.
Here is the output of prtvtoc
# prtvtoc /dev/dsk/c0t0d0s0
* /dev/dsk/c0t0d0s0 partition map
* Dimensions:
* 512 bytes/sector
* 63 sectors/track
* 255 tracks/cylinder
* 16065 sectors/cylinder
* 2350 cylinders
* 2348 accessible cylinders
* Flags:
* 1: unmountable
* 10: read-only
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 10522575 27198045 37720619 /
1 3 01 16065 8401995 8418059
2 5 00 0 37720620 37720619
7 8 00 8418060 2104515 10522574 /export/home
8 1 01 0 16065 16064
Output of format
selecting c0t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c0t0d0s0 is currently mounted on /. Please see umount(1M).
Total disk size is 8920 cylinders
Cylinder size is 16065 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
====== ====== ============ ===== === ====== ===
1 Active Solaris2 1 2350 2350 26
As you can see, the 1st partition is used at 26%. With fdisk, I can create a 2nd partition. My problem is to get that 2nd partiition availlable to Solaris and create a zpool in that unused space..
Michel

Probably a stupid question - what does '256' mean in response to a command

Hi,
I.m just learning PHP (I mean at the very beginning). The tutorial I'm following was running through how to start and stop the apache server via terminal.
When I entered the commands, I received the following error"
/usr/sbin/apachectl: line 82: ulimit: open files: cannot modify limit: Invalid argument
So I poked around and found out that I needed to modify the apachectl script to remove "ulimit -S -n `ulimit -H -n`" from the line ULIMITMAXFILES="ulimit -S -n `ulimit -H -n`"
So created a backup, opened nano and modifed the script. So far so good. So I went to try the command again and....
sudo apachectl graceful
256
Can someone please enlighten this poor beginner as to what I've done?
Many thanks

Can someone please enlighten this poor beginner as to what I've done?
Sure. You edited the file incorrectly (or, at least, pointlessly )
modify the apachectl script to remove "ulimit -S -n `ulimit -H -n`" from the line ULIMITMAXFILES="ulimit -S -n `ulimit -H -n`"
Well, sorta, kinda.
To understand what is happening now it's useful to understand what the original command did.
ULIMITMAXFILES="ulimit -S -n `ulimit -H -n`"
This command has three components:
ULIMITMAXFILES=
"ulimit -S -n "
and
`ulimit -H -n`
Note that the last component is surrounded by back ticks. This indicates that it's a subcommand that should be executed and the result of which inserted in its place.
So in effect, this line tells the shell to first go away and run `limit -H -n`.
This command determines the maximum limits available for a process and would normally return the string 'unlimited'.
This has the effect of turning the full line into:
ULIMITMAXFILES="ulimit -S -n unlimited"
(since the subcommand has been executed and its result inserted in the command).
So now the shell can run the command 'ulimit -S -n unlimited', the result of which is stuffed into ULIMITMAXFILES
Your mistake is that you simply omitted the subcommand that determines the maximum process limit on this system so now the command looks like:
ULIMITMAXFILES="ulimit -S -n"
which simply determines the current process limit (which is normally 256).
In other words, since you nixed the last parameter to the command you're now just asking it for the current limits (256) rather than setting a new limit value.
That's why you get '256' - it's what you asked for.
As for what to do about it? Well, nothing would be one option - it shouldn't prevent apache from running, you just get additional output when you run apachectl. If it bothers you, delete (or comment out) the entire line rather than just the subcommand. Unless I'm mistaken it's not going to make and significant difference to Apache's operation either way.

Question:what jobs we have to run?

hai all,
Please tell me what are all the jobs we have to run to complete the load event successfully?.how many jobs are there in bw and source system?.
regards,
sri

You run delta jobs in ecc just for LO cockpit..Other then that no jobs to be run in source system, unless u desing some custom extractor which requires it...
In BW it all depends on your data flow..
Basic you schedule InfoPack to extract data...
Generally all the steps in BW are integrated in process chain and we just schedule process chain..
If process chain is not used then after loading you may have to carry out few tasks manually like ODS activation, roll up...
Well it again all depends on your design and dataflow

Stupid question--what do install DVDs look like?

Hey, everything got mixed up in the Christmas rush, including the disks for my 2.0 dual-core. I know I have them, as I ran Hardware Test after purchasing some RAM.
Can anyone tell me what they (and their packaging) look like? I can't find them anywhere. I do have the books (black folio). Just can't remember the DVDs.
And is it normal that I can't run fsck on this Mac?
D'oh! and thanks.
PowerMac G5/2.0 dual-core, 4.5gb RAM Mac OS X (10.4.3)

They are in a white paper sleeve with a plastic
window in it. The DVDs are grey in color. fsck should
work.
OK, now I remember. The two-sided thingy. White paper sleeve... not gonna stand out. But at least I know what I'm looking for now.
As for fsck, I get the prompt by the second restart (first one only gets partway through the text) but can't type. Or keys repeat and can't be stopped. Repeat is on Macally keyboard only, can't type is on both original and Macally. When I get ambitious, I'll pull the RAM and try again.
My original problem was just Photoshop being picky about fonts, and I fixed that.
Back to the DVD search. Thanks!

Probably a stupid question . . . does the iPad come with iTunes preinstalled?

I'm in need ot a portable way to listen to podcasts and type some notes. Due to low vision I cannot use an ipod or iphone. I have an imac at home. Does the ipad come with itunes preinstalled, or would I haave to buy it separately. I know I'd have to purchase another copy if pages, which I have on my imac.

Yes - but the iTunes that comes installed on the iPad is the iTunes Store where you purchase your media. The iPad comes with a preinstalled iPod App and that is where your music library resides and plays on the iPad - not in iTunes.
You don't have to buy either apps for the iPad.
Message was edited by: Demo

MD01 - in what order does the MRP run pick its materials to plan

Hello,
I would like to know how the MRP global run (MD01or inthe background) picks the sequence of its materials?
Is it by order of material number? first number first run? or is there anyother logic?
Thanks for any reply
Aart

Dear Aart,
As well said by Dogboy49,the system plans the materials according to the low level code sequence.
Materials may appear in several products and in several production levels of a product. The low-level code represents the
lowest level of usage of a material within all product structures.
It determines the sequence in which the materials are planned. The system plans materials with the low-level code 0 first and
then those with 1 and so on. The lower the low-level code is, the higher the number assigned to the level.
http://help.sap.com/erp2005ehp_05/helpdata/EN/f4/7d276944af11d182b40000e829fbfe/frameset.htm_
Regards
Mangalraj.S

Stupid question: whats wrong here? -- Syntax Error in FROM clause

i keep getting the error: Syntax Error in FROM clause.
here is the code:
<%@ page import="java.sql.*" %>
<HTML>
<HEAD>
<TITLE>User Application Area</TITLE>
</HEAD>
<BODY BGCOLOR="#FFFFFF" TEXT="#000000">
<%
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:fypproject","","");
Statement st = con.createStatement();
String email = (String)session.getAttribute("email");
String levelStatus = (String)session.getAttribute("levelStatus");
String details = "SELECT PD.Forename, PD.Surname, L.Level_Name FROM PD Personal_Details AND LD Login_Details AND L Level WHERE PD.Email_Address = LD.Email_Address AND LD.Level_ID = L.Level_ID AND Level_ID = '" + levelStatus + "'";
ResultSet rsDet = st.executeQuery(details);
if(rsDet.next()) {
String forename = rsDet.getString("Forename");
String surname = rsDet.getString("Surname");
String level_name = rsDet.getString("Level_Name");
%>
<DIV ALIGN="center"><H1>User Application Arena</H1></DIV>
<BR>
<H4>Welcome back <% out.println(forename + " " + surname); %> </H4>
<BR>
<%
out.println(level_name);
else {
out.println("NOT FOUND ANYTHING");
st.close();
con.close();
%>
</BODY>
</HTML>
the strange thing is when i write a query that doesn't involve the 'Level' table it works fine.
for example if i just want to display the forename and surname from 'Personal_Details' where the Email_Address = email it works fine...as soon as i involve the 'Level' table i get this error.
i basically have 'Level_ID' in the 'Login_Details' table which is found out in the preceding jsp and passed through to this page and i can print out the Level_ID
but....what i want to do is use this Level_ID and find the respective Level_Name in the Level table.
my Level table looks like this:
Level_ID Level_Name
0 Pending
1 Interview
2 Rejection
Thanks :o)

Perhaps this is your issue ...
The column Level_ID is in both the Login_Details and Level tables. Therefore, in your WHERE clause, you must specify a table alias for each reference to Level_ID
WHERE PD.Email_Address = LD.Email_Address AND LD.Level_ID = L.Level_ID AND Level_ID = '" + levelStatus + "'";
should be
WHERE PD.Email_Address = LD.Email_Address AND LD.Level_ID = L.Level_ID AND L.Level_ID = '" + levelStatus + "'"; //ADDED "L." before Level_ID
Level_ID would have been unique until you added the Level table.
Good luck.
-Mark

Newbie to Mac, with a Stupid Question

Ok, I just bought and received my first Mac, a MacBook, two days ago (Windows Vista Victim). So far, it's going ok, but I'm still on the learning curve.
Here's my stupid question: What is the function of the four keys on the lower left corner (first row) of the keyboard? The first one says "fn", then "ctrl", then "alt/option", and then the Apple logo with another symbol. I'm sure I would get around to finding out, but a kickstart from you guys would be nice.
Thanks in advance!
Dirk in Florida
MacBook Mac OS X (10.4.9)

thats used for various reasons,
fn= on windows side fn + the volume button makes ur sound go up, down or off
ctrl=is used for editing purposes for windows platform, for example, ctrl + c = copy
Alt\options= its usually used for switching platforms on start up for example, what your computer is starting up hold options and it will ask u what to start up on
The apple button= on macintosh platform it allows you to do various short cuts (like the ctrl button on windows) for example, apple button + q = quit
Ok? if u have any other questions just ask

This is probably a stupid question, but what does the red circle with a number in it mean on iCal? It looks just like the emails notification. I do not have anything do or up in my cal.

This is probably a stupid question, but what does the red circle with a number in it mean on iCal? It looks just like the emails notification. I do not have anything do or up in my cal.

Actually, another person on the "more like this" had the right answer. It meant I had a notification for an invite that I needed to respond to.
Hope this helps you as much as it helped me.
D

Does Form6i/Report6i support Solaris x86?

There is only Form6i and Report6i for SunSparc and no Solaris version for x86.
Have anybody tried to install the Linux version of Form6i or Report6i in a machine running Solaris X86? And what is the key to install it successfully?

I'm sure that Oracle8i server supports Solaris Intel Platform and Oracle9i doesn't support Solaris Intel Platform at this moment as I know.

Stupid question - What platforms does Solaris x86 run on?

Similar Messages

Maybe you are looking for