Stupid weird tomcat problem...

what does this mean? i'm at the end of the road with tomcat, it works when i first install it, but after restart it gives me this crap, i'm going mad about it and need help, plz spend a few seconds helping me...
error:
Catalina.start: LifecycleException: null.open: java.net.BindException: Address
already in use: JVM_Bind:8080
LifecycleException: null.open: java.net.BindException: Address already in use:
JVM_Bind:8080
at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConne
ctor.java:1130)
at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:454)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:553)
at org.apache.catalina.startup.Catalina.start(Catalina.java:780)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
----- Root Cause -----
java.net.BindException: Address already in use: JVM_Bind:8080
at org.apache.catalina.connector.http.HttpConnector.open(HttpConnector.j
ava:950)
at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConne
ctor.java:1128)
at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:454)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:553)
at org.apache.catalina.startup.Catalina.start(Catalina.java:780)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)

Ok here's the list of ports i get:
C:\>fport /i
FPort v2.0 - TCP/IP Process to Port Mapper
Copyright 2000 by Foundstone, Inc.
http://www.foundstone.com
Pid Process Port Proto Path
8 System -> 1027 TCP
8 System -> 139 TCP
8 System -> 445 TCP
396 svchost -> 135 TCP C:\WINNT\system32\svchost.exe
452 tomcat -> 5252 TCP E:\Apache_Tomcat\bin\tomcat.exe
452 tomcat -> 8008 TCP E:\Apache_Tomcat\bin\tomcat.exe
452 tomcat -> 8009 TCP E:\Apache_Tomcat\bin\tomcat.exe
784 MSTask -> 1025 TCP C:\WINNT\system32\MSTask.exe
1320 msmsgs -> 10581 TCP C:\Program Files\Messenger\msmsgs.exe
1348 loadqm -> 1187 TCP C:\WINNT\loadqm.exe
8 System -> 137 UDP
8 System -> 138 UDP
8 System -> 445 UDP
220 services -> 1026 UDP C:\WINNT\system32\services.exe
232 lsass -> 500 UDP C:\WINNT\system32\lsass.exe
396 svchost -> 135 UDP C:\WINNT\system32\svchost.exe
1320 msmsgs -> 1190 UDP C:\Program Files\Messenger\msmsgs.exe
1320 msmsgs -> 1191 UDP C:\Program Files\Messenger\msmsgs.exe
1320 msmsgs -> 9837 UDP C:\Program Files\Messenger\msmsgs.exe

Similar Messages

Weird tomcat problem (class reloading)

i have very weird problem with tomcat 3.2.3.
for example i have html page which calls servlet.
everything is fine when i start tomcat. now when i
recompile servlet and try to call it again, this is
what i get:
Internal Servlet Error:
java.lang.IllegalStateException: Can't happen -
classname is null, who added this ?
at
org.apache.tomcat.core.ServletWrapper.loadServlet(ServletWrapper.java:261)what kind of error is this and what causes it? it
happens even if i try to refresh html page after
compiling.
is there any way to fix this because it is realy
tiring to restart tomcat each time i recompile
servlet.
thanx for help

Tomcat has to be restarted after recompiling any
servlet-class that was already invoked by tomcat.It's
the price you have to pay for a free server.
I think that this is not right. You can specify that an application context is "reloadable" in the server.xml file. This means that the servlet classes will be reloaded if the servlet has changed. This doesn't work for regular classes such as beans because they use a different class loader. (But Tomcat 4.0 is supposed to have something like this.) So just specify your servlets in web.xml and make sure reloadable="true" in the context in server.xml.

Weird Tomcat Problem -

I know this is not a tomcat forum, but have always been able to find help with issues @ forum.java.sun.com.
So here's my problem on Apache Tomcat/5.5.4:
I'm in the process of switching web-site to another host and during testing, I'm getting the following:
org.apache.jasper.JasperException: Unable to compile class for JSP
Generated servlet error:
Only a type can be imported. xxx.yyy.ZxxxZxxxZxxx resolves to a packageIf I refresh page, then the jsp get's complied. If I refresh again, then maybe complied or maybe not complied.
Code/site works fine on other host(except horrendous host up-time) and internally.
Any suggestions would be great.
Thanks.

Is xxx.yyy.ZxxxZxxxZxxx a package like the error suggests? If so, try xxx.yyy.ZxxxZxxxZxxx.* if not then no clue....

Weird internet problem / ssl connection error, site loads in safari not in firefox or other way around

I really can't figure out this problem. Search the internet tried all kinds of things, nothing help so far.
I have a Macbook Pro (Lion originally installed) running on Mavericks (all latest updates). SSD installed and the DVD tray is replaced by the original HDD.
The laptop wasn't running very smooth anymore so decided to give it a fresh Mavericks install (even though I know it's not really necessary for mac, it helped, everything is much faster except a weird internet problem came up).
After freshly installing Mavericks I couldn't get into my google account anymore, just wouldn't load. Tried Safari (use this normally) and Firefox and Chrome, this last was gave a SSL connection error, both Safari and FF said the website couldn't be loaded because the server didn't respond. For Gmail I use Mailplane which is just stuck on a white page. I tried repairing the keychain, repaired disk and disk permissions, cleaned browsers, turned off firewall and antivirus (Shopos) started in safe mode, checked time settings which were all good. Nothing of this helped. I even ended up creating a usb bootdisk for Mavericks, formatted the disk and reinstalled from the start just Mavericks and nothing else, started Safari, still the same problem. As even this didn't help I figured it's not worth reinstalling all software so put back my backup.
Now I ended up somehow only being able to use Gmail normally in Firefox, Chrome still gives SSL error and Safari can load the inbox, but I can't open any messages. I get the error there is a problem with the connection. If I try in Basic HTML mode it surprisingly does work.
You would say, just use Firefox, finished...but the thing is that sometimes random websites won't load in Firefox, when I load the same site in Safari it works perfectly.
O yes, I also tried the connect to my iPhone and use the Cellular data network, then it's no problem using Gmail in Safari normally. You would say it's a router problem, but I have another Macbook Pro (just one model later running Mountain Lion) this one works perfectly with every browser. Also my iPhone does everyting logged into the WiFi network.
You can understand I really have no clue what's going on here, I don't see any logic. I can only think of a hardware problem in my Macbook, but don't see how that could cause these problems.
I hope someone is ably to help me ?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Weird audio problem during calls

I have a weird audio problem and was wondering if anyone else has had a similar problem or could help...
My wife and I both have iPhone 5's and sometimes (not all the time) when she calls me (or I call her), it connects, but no matter which audio input I choose (phone, bluetooth, speaker, headphones), I cannot hear her, but she can hear me... I hang up, call back (and when I call, there is no dialing sound, nor any other phone sounds) and it's the same thing. Sometimes restarting the phone works, other times I have to restart it 3-4 times before it'll work again. I try different things during these calls, like turning on/off bluetooth and/or wifi (pretty much anything I can think of that would make a difference), but nothing seems to help.
The (other) weird part is that after the last time of this happening, I tried calling my iPhone with my office phone and it worked fine, so then I immediately call my wife back with my iPhone and it was doing the same thing again. I called her back using my office phone and could talk to her fine...
This problem has been going on for a few months now and I have tried restoring the phone a couple times (and I am on the latest iOS) and sadly, that hasn't done anything to help... Does anyone have any ideas what is going on? I'd make an appointment for the problem, but since it doesn't do it all the time, I don't know what good it would do... But it is getting very frustrating!
Thanks for any help!
-Jason

Thanks for the response! It happened again yesterday... It seems to be happening more frequently in the past few weeks now.
I checked the link and have tried all of the things listed at one point or another over the past few months. I did just check my Carrier settings and it said it had updated (it's on 14.1), but I am not sure when that happened (could have been today, could have been after my last restore last week, not sure). I'll keep my fingers crossed that maybe that fixed it...
If it continues to act up, would you recommend that I bring the phone in to an Apple store or an AT&T store? I bought the phone through Apple, but my carrier is AT&T (and if you suspect that the problem may be with the cellular conection), maybe the AT&T store would be the better choice?
I really wish the problem would be more consistant or go away, cause trying to get the problem solved is driving me crazy!

Slooow internet and weird mouse problems?

I recently upgraded my iMac to Leopard (10.5.4) and started having weird mouse problems. At start up, mouse would be frozen in upper left corner. I'd restart, switch mice, restart, over and over. I use a Wacom tablet w cordless mouse plus Apples alum cordless keyboard. Eventually I tried switching USB ports for my Wacom tablet and the mouse was OK. I have learned that when this problem occurs, I need to shut down and unplug everything. That seems to solve it. Anyone know why? ALSO, ever since upgrading I have found the Internet to be appallingly slow. I have 2 GB memory and just upped my internet speed (supposedly) through Embarq.

hmm, what is a mouse usb or a keyboard usb?
arent all the usb ports same?
I really wish to show you how this happens it is really fun, but also annoying. especially when I am playing a game. it is interesting to watch the screen when suddenly all the world starts rotating when you are playing a first person shot'm up.

KT6V Weird boot problems

Hi..
I'm having this weird boot problem (and no it doesn't seem to be the standard one)
OK..
I have the following :
AMD Athlon 2000+
KT6V LSR mainboard
2x 256 Crucial PC2700 memory
IDE Hard Disk (120gb segate)
Creative 5700ultra Graphics card (AGP)
Cd Rom
Chieftec 400w PSU
WinXP Pro
If I set my CPU FSB to 100mhz (everything else on auto).. win Xp pro boots fine and all is pretty good except that my chip is now seen as a lowly 1.25ghz..
If I then set my CPU FSB to 133 or 166 then the machine boots (ie it beeps etc..).. starts to load windows xp (I get the logo and that's when the problem happens) and either black screens (ie.. nothing and the monitor turns off) or blue screens with the windows message saying that windows has detected a hardware fault and has halted the system..
I know my memory, chip, heatsink etc all work because just over an hour ago they all worked fine in my KT3 ultra.
What is going on as I've tried almost everything to try and solve this, with the only option to set the FSb to 100mhz which is incorrect for my CPU.
How do I fix this.
I've looked through the forum but this is not the same problem as simple reboots.. this is weird.
If I can't fix this then I guess it'll be send it back.. which is a shame because I like MSi motherboards.
Thanks
Slippery

Hi..
I've checked the CPU heatsink.. and nothings wrong !
(Can't check the voltage but I know the PSU is Ok as I did run it in a custom case with 4 Cd writters, 4 HDs, loads of lights etc.. before I moved to this new plain case tonight)
What's weird is that set at 100FSb it's fine but at 133 or 166 it just crashes after the loading XP logo is displayed. Up until that point it's all fine.
But why does it run Ok at 100mhz and not 133mhz ?
Please help.. before I end up fixing this with a hammer !
Thanks
Slippery

Weird paintbrush problem - newbie question

Hi,
This may be a stupid question but I'm having a weird problem with the paint brush where I am getting a stroke within a fatter stroke as I draw (the thinner stroke is inside a white box).
Then depending on what I select later the fatter stroke disappears and leaves the thinner one.
Also I will select my stroke size before I draw but it keeps going back to 1pt when I start to draw.
I checked my brushes panel and I am using a regular oval brush. Also, the illustration I am working with is tiny and I am zoomed in very far where a 0.04pt line is several pixels wide.
Appreciate any help.
Thanks,
Nori

Hi Jacob, Wade,
Thank you for the replies.
Sorry for the delay, I got caught up in some things.
Thanks for the 'appearance panel' pointers.
Now, strangely, it holds the line weight regardless of whether I set it to the [maintains or basic appearance] setting.
The other problem I mention only occurs when I go below a 1pt brush.
currently I am zoomed in very tight and a 1pt brush is about 1/3 of an inch wide on the screen.
What happens for example is that if I draw (paint brush) a .25pt line (or anything less than 1pt), then it will show me drawing a 1pt line which will change to the correct line weight (.25pt in this case) when I let go of the mouse button. However the screen does not refresh properly and some tidbits of the original 1pt line remain at the start and end of the line; the newly appearing line (.25pt in this case) will be encased by a white rectangular block which is what ends up erasing parts of the original 1pt line that is drawn on the screen.
I can post an image somewhere if your interested.
Is this a bug?
Appreciate any help.
Thanks again.
Nori

TOMCAT problem on REDHAT 9,PLEASE HELP

Hello, i am new to redhat and i installed tomcat 4.0.1 and it worked properly, i used tomcat for studying issues so i used to start it and stop it many times
now when i use mozilla and try to request the server using http://localhost:8080/ ,mozilla status bar shows "Transfering data from localhost" and loops for ever
so please help me

I think this is not problem of redhat just check reinstalling tomcat.

Viewing Excel Files using Tomcat - Problem with caching

Hi all,
A small part of an application I'm writing has links to Excel files for users to view/download. I'm currently using Tomcat v5 as the web/app server and have some very simple code (an example is shown below) which calls the excel file.
<%@ page contentType = "application/vnd.ms-excel" %>
<%
response.setHeader("Pragma", "no-cache");
response.setHeader("Cache-Control", "no-cache");
response.setDateHeader("Expires", 0);
response.sendRedirect("file1.xls");
%>
This all works except but I'm having one big problem.
The xls file (file1.xls) is updated via a share on the server so each month, the xls file is overwritten with the same name but with different contents. I'm finding that when an update is made to the xls file and the user then attempts to view the new file in the browser they recieve only the old xls file. It's caching the xls file and I don't want it to. How can I fix this so that it automatically gives the user the new updated file.
The only way I've managed to get Tomcat to do this is to delete the work directory and delete the file from my IE temp folder and then restart Tomcat - this is a bit much!
Any help would be greatly appreciated.
Thanks.

I'd a problem with caching a few years back, for a servlet request which returned an SVG file.
As a workaround, I ended up putting appending "#" and a timestamp / random number after it. The browser assuming each request was new, and didn't use the cache.
Eg.
http://myserver/returnSVG.do#1234567
where 1234567 is a timestamp / random.
Not sure whether you can do this on a file based URL... but maybe worth a shot...
regards,
Owen

Weird Javascript problem on Safari and other web browsers

Hello,
this is actually pretty weird. For the past several weeks I have been dealing with a very strange problem which I believe relates to JavaScript. To be more specific I have an issue with two websites: Macuser.gr and Facebook.com.
As far as Macuser.gr is concerned this is how it's supposed to look:
http://f.cl.ly/items/0j1J123Y2D0t1C2U3b1f/Screen%20Shot%202013-02-06%20at%202.25 .04%20PM.jpg
and this is how Safari renders it:
http://f.cl.ly/items/3N0V3I1c0Q0a1r0K0e1C/Screen%20Shot%202013-02-06%20at%202.25 .40%20PM.jpg
The problem is with the preview images as you can see.
Now, in Facebook there's this annoying white line where it isn't supposed to be:
http://f.cl.ly/items/0k0i2c0T0q1h3t2j2s3e/Screen%20Shot%202013-02-06%20at%202.25 .52%20PM.jpg
I have tried and tested everything (Guest user, different browsers etc) and all it comes down to is JavaScript. Disabling Javascript seems to fix everything immediately. Enabling it again and this mess occurs. Also, this happens with the latest versions of Safari, Chrome and Firefox BUT not with Camino 2.1.2 although it has JavaScript enabled in it.
This is really frustrating and it appeared out of the blue one day. I did not have this problem from day 1. Any ideas?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. While in Recovery, you'll have no access to your saved bookmarks or passwords, so make a note of those before you begin, if they're needed for the test.
Test. After testing, reboot as usual and post the results.

Weird mouse problem (clicks not being performed, -)

Recently I am suffering from a really weird problem.
The middle mouse button shows a really strange behaviour:
I'm using KDE from [extra], and middle clicking e.g. a link in a webbrowser (no matter which toolkit it uses) instead of opening one tab, opens the link in several tabs.
Also middle clicking on a tab, normally should close *one* tab, while here it often closes more than one tab. Since this happens in every application I use, no matter which toolkit is used, this cannot be a KDE/Qt problem, since e.g. Firefox is affected by it too. I also doubt that GTK is the cause of this problem…
[The middle clicking problem has been solved, by cleaning the mouse wheel]
[The problem below, still persists]
Furthermore, sometimes my laptop looks like it enters a "state", where my clicks are not "performed" the normal way:
E.g. I had a media player running, when my laptop got into this "state". No matter where I clicked on this app, the clicking action was performed on the Play button. Using Alt+Tab to focus another window/bring it to the front, and clicking in this window anywhere again resulted in the Play button getting clicked.
After quitting the media player app (through a keyboard shortcut) my clicks still did not work normal. They still simply were not performed. In order to "re-gain" the ability to click, I had to log out first.
Since I've setup my Arch Linux not to automatically start X/KDM after logging out, I found myself in the terminal, where I ran startx, in order to run KDE.
The terminal still had some output of my X session, but it wasn't displayed with normal characters, but rather with some weird characters, looking all scrambled and stuff, as you can see on the screenshot. http://imagebin.org/100067
I currently use the packages from the testing repo, but IIRC this behaviour was there even before installing the testing repo packages.
Extra information:
kernel26 2.6.34-1
xorg-server 1.8.1-1
nvidia 195.36.24-2
xf86-input-evdev 2.4.0-1
I run Arch Linux x86_64 on an Acer 5741G Laptop, with a NVidia Geforce GT 320M.
Interestingly, another user who suffers from the same bug is running a computer with intel graphics, so it probably is not the nvidia driver causing the problem either.
Originally the bug was reported as a rekonq bug: https://bugs.kde.org/show_bug.cgi?id=238987
Thank you
Last edited by pano (2010-06-09 11:43:21)

Hello,
I seem to suffer from the same problem. Sometimes (perhaps triggered by amarok, but I have to investigate this further before blaming this app) the left mouse button stops working. I can not perform left-klicks anymore. Everything is fine with the right button. If I log out and in again the mouse if fully back. In this loop X has not been restarted.
My setup:
KDE 4.4.5 (official packages)
X: X.Org X Server 1.8.1.902 (1.8.2 RC 2)
kernel: 2.6.34-ARCH #1 SMP PREEMPT
architecture: x86_64
mouse: Logitech MX1000 Laser (Logitech, Inc. MX-1000 Cordless Mouse Receiver)
If s.o. will ever work in this I will be happy to provide any information I can come up with.
Cheers and good night.

Tomcat problem

Hi,
my problem is that after installing apache-tomcat-5.5.17.exe in xp, When i write http://localhost:8080/ in internet explorer after starting tomcat then it shows following error:
error
requested url could not retrieved
While trying to retrieve the URL: http://localhost:8080/
The following error was encountered:
Connection Failed
The system returned:
(111) Connection refusedThe remote host or network may be down. Please try the request again.
Your cache administrator is root. But when i type my ip insted of locahost then its working good.
Suppose
http://192.168.1.6:8080 then it is working.
what's the problem of my tomcat.
Is there anybody can help me.
With regards
Bina

First try using http://127.0.0.1:8080. (127.0.0.1 is the ip address of localhost).
If that works then you need to update your host file to include an entry for localhost. You'll need to consult the help files, documentation or internet to determine the location of the host file for your operating system.

Very weird monitor problem, betcha can't solve this one.

OK I have a MacBook Pro 2.4GHz with 4GB of Ram, it's fully up to date with Lion, and is connected to a Formac W2300-1U 23 inch TFT Monitor (DVI, VGA, 1920 x1080, 1000:1, 5ms, 400cd/m²) through a HDMI to Mini port adaptor.
Now, the problem is the monitor flicks off, then on, at first I thought it was just randomly, but today I isolated the problem to something specific that make it happen. When I open the preference panel, and click on 'Trackpad' as soon as the video demo starts to play the monitor switches off then on.
It's totally weird, what on earth could be causing this? Any ideas?

ok well i have no idea what happened. i started out again with a fresh installation of JBoss, and it worked. no clue as to what was wrong. musta been some JAR that was out of place or something.
thank you for your help!

Weird display problem with iMac 24"

Hi guys, I have a very weird problem with my 24" iMac. For some reason it seems that after approx. 10 minutes using the Mac, whenever I keep a window on top of another window and then I minimize it, it keeps there like a ghost for another 5-10 seconds until it fades away slowly slowly.
Sometimes it's hard to see it however it's very evident when using a white window (such as Safari) on a dark background (not black).
I'm attaching an image split into 2 parts, the 2nd part is shot exactly after I minimised the browser. It clearly shows a faded ghost image on the grey Photoshop canvas.
Here's the pic:
http://www.neilazzopardi.com/imac.jpg
Has anyone ever experienced a problem similar to mine? or am I getting paranoid?
By the way, I bought this Mac, 5 months ago and I don't know whether this problem has been there from the beginning but I only noticed recently while cropping in Photoshop and still seeing the parts I removed away very faded.

den.thed it's not that I took it the wrong way or anything but shouldn't I be doing whatever I like with my iMac?
For the record that is a dark grey Photoshop canvas, which just happens to show the problem much more evidently.
The problem is that it happens on any background (even desktop) with any window, even Adium etc. Their ghost just stays there for a while... I use the iMac for design purposes and it's very annoying especially when cropping a picture and what I just cut out stays there very faded...

Stupid weird tomcat problem...

Similar Messages

Maybe you are looking for