Stutter after Upgrade PPro CS5.5

Hi,
I've spent a day with this and I'm not able to figure it out... Playing ProRes files back in PPro CS5 works superbly, even with an insane amount of FX attached. Same preset, same clip in CS5.5 dosen't even play back correctly without any FX on it... the bare clip stutters, drops out audio, etc. What can that be?
Thanks so much for your help...
Rob
Processor  2 x 2.26 GHz Quad-Core Intel Xeon
Memory  16 GB 1066 MHz DDR3 ECC
Graphics  ATI Radeon HD 4870 512 MB
Software  Mac OS X Lion 10.7.2 (11C74)

Thanks so much for your reply, Todd. No, I'm running 5.5.2
Could it be that it is a "bad install"? Would re-installing solve anything? And - could tha AJA drivers/plugins have anything to do with it, as in, "confuse" the system? (I tested a non-AJA sequence, identical on CS5 and CS5.5, and the latter made difficulties - so it might not be the AJA thing directly, if at all...).

Similar Messages

  • Can't Find My Pictures Folder in Bridge after upgrading to CS5

    Can't see My Picture folder after upgrading to CS5. See My Videos, My Favorites, My Music. I must have something I need to enable in View.
    Checked Preferences and My Pictures is check in Preferences.
    Can see all my picture files just fine when I plug in my external drive with the files all brought it by date.
    Thanks.

    If you mean My Pictures it is on the C drive.
    I have four internal and two external drives and all picture files show up in Bridge for immediate access except the My Pictures folder under my name on the main drive.
    There is only one partition on the drive and there is 350 gb free space.
    The set up, programmes,security software and drives are identical to when I was using CS5 with Vista, which is why I am thinking it is something to do with Win 7.

  • After upgrading to CS5, printing PDFs has become a nightmare!

    After upgrading to CS5, printing PDFs has become a nightmare!
    For example,
    1. It would never finish printing the file, just the first so many pages. So... 
    2. I updated the driver, and then I could print one copy only without problems. But...
    3. I can never print more than one copy of a PDF without collate mis-sequence problems. It just does not print one whole copy before printing the next copy. And it goes back and forth printing some of the first copy, then the second, then a few pages from the first, etc. Eventually it all prints, but they are mixed up sequentially. But some pages are in order.  And...
    4. It prints soooo slow compared to before.
    I upgraded from CS3
    My printer is a Ricoh SP C420DN Color Laser Printer
    Pat-

    Partrick David Yanello wrote:
    All I know is that before I could print fine and fast and in any quantity I wanted (while using CS3 Indesign exported PDFs and Booklet Spreads on my latest and greatest printer, a Color Ricoh SP C420 DN).
    But now, since I upgraded to a Master Suite of CS5, at first it would never print the whole file, even once. And when I upgraded to the Universal Print Driver, and or any other drivers, it will only print one copy of a PDF without mis-sequencing the printed pages, and it is so slow. It is worthless.
    Pat-
    P.S. I think I need to try to call Ricoh or something, but will that work? Sigh!
    Yeah, this sounds like a general print driver problem with the newer versions of the Adobe products, not just Acrobat or ID. Ricoh may or may not have an updated driver, but theyare definitely the ones to ask.
    You haven't told us the OS... Some Mac users have had good luck, I think, using the CUPS drivers with problem printers when the manufacturer doesn't have a solution, but I'm a Windows guy, so don't do much with Mac printing.

  • Photoshop CS6 issue with shortcuts and my keyboard after upgrade from CS5

    I recently upgraded from CS5 Extended to CS6 Extended on my Mac (Mavericks), but installed it in English instead of German this time. I transferred most of my presets just fine, but none of the keyboard shortcuts were working. All I got was an unequal sign for all shortcuts and even manually changing them didn't get them to work. I found a few discussions about this issue and ended up adding a German keyboard, as I am always on the Romaji setting of my Kotoeri (Japanese) keyboard. That seemed to solve the issue, but only if I change to the German keyboard before opening Photoshop. Shortcuts don't work in CS5 anymore either unless I do. Sometimes the shortcuts also stop working a while after I change back to the Kotoeri keyboard.
    Now I would like to know if there is any way to get around this issue. Isn't there a way to get my shortcuts working again without constantly having to change keyboards? I much prefer the Kotoeri one since the icon for the German keyboard in my menu bar looks extremely obnoxious, in my opinion. It's mostly a cosmetic thing to me, but I would love to get everything back to the way it was before.
    I'd much appreciate any advice or help.

    I am having a similar problem. Just upgraded to Apple Yosemite and all none of my keyboard shortcuts are working in a clean install of Photoshop CS6. Every menu item has some form of the ≠ sign. I've trashed the .plist file, rebuilt permissions, etc. Even basic keyboard commands, like Command-N for NEW or Command-Q for QUIT do not work. In fact, many don't show up in the menu at all. I don't have this issue in InDesign CS6 or Illustrator CS6. Every once in awhile, maybe 1 time out of 20, menus and keyboard shortcuts work properly, but I can't find any pattern.

  • Epson r1900 Prints too dark after upgrading to cs5 from cs3

    Ok this one has got me stumped.  While still in photoshop CS3 my epson r1900 was printing photo's just fine.  After upgrading cs3 to Photoshop cs5  it now prints everything too blue.  Nothing else has changed. My monitor is still calibrated, my printer paper profiles are still the same, the only change was upgrading to cs5.  To me it looks all the world like ICM is being applied twice (in photoshop and the printer) but in photoshop I have selected "photoshop manages colors" just like I did in cs3, and in the print dialog box for the printer, I have selected no ICM again just like I did in CS3.  But now the prints come out with a, to my eye, dark blue tint.  Very very frusterating.  I have deleted the color prefs file and let that recreate, but that did not help either.  I am out of tricks.  Any suggestions?
    Thanks
    Patrick

    There were a lot of reports of "double profiling" with Epson printers when Photoshop CS5 was first released.  I believe many people were seeing magenta-looking prints at that time.
    Unfortunately, I don't think there was ever a resolution or even a good workaround...  I recall at least one person bought a new printer to be able to continue to work.
    Of course, double check to see whether Epson has released any updated printer drivers.
    As I don't have an Epson myself, I can only suggest that you'll want to experiment with your settings to see if you can find a way to disable color management in the printer driver, so that only Photoshop does it - or disable color-management in Photoshop so that only the printer driver will do it.
    -Noel

  • Can't start acrobat 9.0 after upgrade to cs5

    I have cs4 web premium with acrobat 9.0 pro, and upgraded to cs5 web premium, on my new computer I only installed upgrade cs5 with help of key for cs4, and then I installed Acrobat 9.0 Pro from web premium cs4.
    Then I start Acrobat it says, a part of a suite, start photoshop to confirm, and then i shut done. It is the same then I start with Photoshop cs5.
    Someone how have an solution?

    Moving this discussion to the Acrobat Installation & Update Issues forum.

  • Can I still use my CS3 premiere after upgrading to CS5.5

    As I do the learning curve, will I still have the CS3 premiere pro button on my desktop after I load CS5.5 production premium from the disk set ?
    Besides using CS5.5 premiere pro, I would still like to edit my prior projects in CS3 premiere some times.          Thanks.    -   john

    Yes, the programs do co-exist and install in sepearte folders. Nothing gets deleted or overwritten.
    Mylenium

  • Uninstall CS5 after upgrade to CS5.5 Production

    I have recently upgraded to CS5.5 production and would like to know if I should remove CS5 now that I am running 5.5? Or is there any reason to keep both on my computer?
    Is there any special method of uninstalling the old suite.

    The only downside to keeping both is the use of disk space.

  • "Edit in Photoshop" missing after upgrade to CS5

    I use Lightroom 2.7 running on a Windows 7 x64 machine.  I just upgraded from CS4 to CS5 and "edit in Photoshop" is no longer an option in Lightroom.  Photoshop is shown as "not found".
    I rebooted the computer and that was no help.  I "repaired" Lightroom 2.7 using the Window installer.  No help.
    I'm at a loss about how to get Lightroom to recognize Photoshop CS5.  Anyone have any ideas??

    quote "I can only 'Edit in Photoshop.exe' because I did added an 'additional external editor'."
    I have done the same thing but this is a poor work around.  I use Photoshop in my workflow to finish edit photos I organize and work up in Lightroom.  Using this procedure 1) takes more time as a tif or pdf file is created and edited and 2) since I don't want the edited file I have to delete after I edited it.  It is a lot of extra work without any benefit.
    When Photoshop is directly linked to LR the whole workflow is snappier and more efficent.
    Clearly Adobe hasn't updated LR to pickup CS5.... they need to.

  • M2t (mpeg2 layer2 audio) Out Of Sync audio after upgrade to cs5

    Hi Everyone,
    We use JVC GYHD201 Cameras daily - they produce MPEG T/S files that worked fine in CS4.
    I am running win 7 Ultimate 64 on an intel Skulltrail MB w 16 gig of ram, 2 x 9775 quad core processors and a ati 4870x2 video card with 2 gigs of ram.
    Here is the chain of events,
    Lots of projects in cs4, no transcoding files work straight from the camera's DVR. (720p30)
    I decide to CS5
    I deactivate CS4 Install CS5 - CS5 trial works with all my projects and reads the now offending m2t files fine, works great.
    I open AE CS4, - I get sorry to interrupt but enter a serial number or go to trial mode. I select trial mode.
    Now, CS5 can no longer import the files.
    I read about needing a full license for many formats, considering cs5 a nice upgrade, fork out the dough.
    After entering serial numbers and restarting files import fine, BUT sound is out of sync by a 1-2 seconds and expotentially as the video plays out.
    Files play fine in vlc, media player etc.
    Codec Sniper shows all /cs4/mainconcept codecs as broken
    I deinstall CS4/ CS5 and reinstall cs5 only, Same problem
    I deinstall cs5, delete every folder with adobe on it in /user/ and prog files reinstall, same problem (cs4 installation fix)
    I deinstall, delete all folders and create a new user install to that user, same problem (cs4 installation fix)
    Reinstall quicktime ,...
    I buy the Mainconcept mpeg2 64bit codec pack, same problem
    Converting the video to MONO fixes the out of sync. -go figure.
    Unfortunate, our operators are too lazy to shut off the second mic so quite often I have to copy left or right channel. Also, I have many left right recordings with 2 mics, this is not a solution I can live with. (Kudos to Mr. Jolly of Adobe video tech support in India for the Mono fix)
    These same files open fine in a machine that has cs4 and cs5 installed on it,
    want to get into transcoding to fix it, does anyone know who to force the adobe splitter to use the mainconcpt codecs I just bought or to force the use of whatever codecs are supposed to be included in cs5?
    Any ideas would be appreciated.this has gone on for 3-4 days now and I am quickly falling behind on the work flow.

    I am wondering is anyone can tell me where CS5 is looking for it's codecs??, it doesn't seem to be using windows

  • Uninstalling CS3 after upgrading to CS5.5?

    Sorry to throw this query at you all but am unable to find an answer in Adobe support after spending half an hour looking!
    I've just upgraded from Web Premium CS3 to Web preium CS5.5 - all good - but the I still have all of the CS3 programmes on my PC. Can I now delete the CS3 suite ok without affecting the CS5.5 progs? I presumed that installing an upgrade would do just that - UPGRADE the existing software and not install a whole new suite along side the old one.
    Help appreciated!!
    JC

    Upgrade does not do that.  There is a good reason for keeping older versions of software even if DW doesn't have that need.  The best program to think of incompatibilities between versions is InDesign.  I've been in the habit of keeping multiple versions of that, or with Photoshop at one point because I could never remember to switch between 64-bit launch and 32-bit launch for some older functions that were not compatible.
    All you have to do is:
    Mac User - Go to the Utilities folder and there is a folder of Adobe installers in there.  Choose the CS3 uninstaller.
    Windows User - Go to the Control Panel-> Programs and click to uninstall CS3.
    If the uninstaller is not present you may need your old media to uninstall.  Or you may be able to clean one version as a last resort ( http://www.adobe.com/support/contact/cscleanertool.html ).

  • After upgrade to CS5 Audio does not import / load with video in avi

    I updated from Ppro CS3 to CS5 purchased from the Adobe store.
    I opened a project created in CS3 in CS5 and followed the prompt to save it as a new project.
    All tracks, edits, etc were intact and any given sequence played re-rendered etc., as expected.
    I created a new project, imported one of the same avi files used in step 2.  Again, everything worked properly
    I ran update from the PPro help menu to 5.0.3.   I ran this process two different times.  The first time I selected all updates.  The second time I only update PPro itself.  I did a system restore in between, the following results were identical in both situations.
    Now, when I open either the converted or new projected file, Ppro reports the media as "offline"…it is not.  If I "Link Media" the file, I get this message:   The selected file does not contain audio media used by clip references in one or more sequences.  These audio clip references will be deleted, and cannot be undone.  Do you want to continue?"
    Gspot.exe reports the audio codec as MPEG-1 Layer 2 and the video codec as MJPG
    The avi files were rendered on a MAC from .MOV's to AVI's.  Here are the file properties that PPRo reports:
    File Path: E:\CONVERTED\3-1
    Type: QuickTime Movie
    File Size: 21.9 GB
    Image Size: 1440 x 1080
    Pixel Depth: 24
    Frame Rate: 29.97
    Total Duration: 00:23:47:20
    Average Data Rate: 15.7 MB / second
    Pixel Aspect Ratio: 1.3333
    Something in the update from 5.0 to 5.0.3 is the problem.
    Running on Windows 7, x64, latest updates

    FWIW,
    here is the output for the corresponding .mov file...which PPro will not load
    General
    Complete name                    : E:\coregenius\1.mov
    Format                           : MPEG-4
    Format profile                   : QuickTime
    Codec ID                         : qt 
    File size                        : 14.0 GiB
    Duration                         : 1h 15mn
    Overall bit rate                 : 26.6 Mbps
    Encoded date                     : UTC 2010-11-18 20:09:00
    Tagged date                      : UTC 2010-11-18 20:09:01
    Writing library                  : Apple QuickTime
    Original source medium           : 001
    ©TSC                             : 2997
    ©TSZ                             : 100
    Video
    ID                               : 1
    Format                           : hdv2
    Codec ID                         : hdv2
    Duration                         : 1h 15mn
    Bit rate mode                    : Variable
    Bit rate                         : 25.0 Mbps
    Width                            : 1 416 pixels
    Original width                   : 1 440 pixels
    Height                           : 1 062 pixels
    Original height                  : 1 080 pixels
    Display aspect ratio             : 16:9
    Frame rate mode                  : Constant
    Frame rate                       : 29.970 fps
    Bits/(Pixel*Frame)               : 0.555
    Stream size                      : 13.2 GiB (94%)
    Language                         : English
    Encoded date                     : UTC 2010-11-18 20:09:00
    Tagged date                      : UTC 2010-11-18 20:09:01
    Audio #1
    ID                               : 2
    Format                           : PCM
    Format settings, Endianness      : Little
    Format settings, Sign            : Signed
    Codec ID                         : sowt
    Duration                         : 1h 15mn
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Channel positions                : Front: L
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 414 MiB (3%)
    Language                         : English
    Encoded date                     : UTC 2010-11-18 20:09:00
    Tagged date                      : UTC 2010-11-18 20:09:01
    Audio #2
    ID                               : 3
    Format                           : PCM
    Format settings, Endianness      : Little
    Format settings, Sign            : Signed
    Codec ID                         : sowt
    Duration                         : 1h 15mn
    Bit rate mode                    : Constant
    Bit rate                         : 768 Kbps
    Channel(s)                       : 1 channel
    Channel positions                : Front: R
    Sampling rate                    : 48.0 KHz
    Bit depth                        : 16 bits
    Stream size                      : 414 MiB (3%)
    Language                         : English
    Encoded date                     : UTC 2010-11-18 20:09:01
    Tagged date                      : UTC 2010-11-18 20:09:01
    Menu
    ID                               : 4
    Language                         : English
    Encoded date                     : UTC 2010-11-18 20:09:01
    Tagged date                      : UTC 2010-11-18 20:09:01

  • Bridge CS6 crashes on startup after upgrade from CS5

    Yesterday I upgraded to Photoshop CS6 using an install disk mailed from Adobe.  Photoshop CS6 itself appears to be working fine, but both the 32-bit and 64-bit versions of Bridge CS6 crash on startup with the standard Windows popup ("Adobe Bridge CS6 has stopped working.  Windows is searching for a solution...").  Bridge CS5 still works great, as it did before the CS6 installation.
    The Windows Event Viewer shows the following message for the crash of the 64-bit version:
    Faulting application name: Bridge.exe, version: 5.0.0.399, time stamp: 0x4f5ec28e
    Faulting module name: MMXCore.8BX_unloaded, version: 0.0.0.0, time stamp: 0x4f308138
    Exception code: 0xc0000005
    Fault offset: 0x000007fee2694c10
    Faulting process id: 0x11f0
    Faulting application start time: 0x01cd2de2890d2563
    Faulting application path: C:\Program Files\Adobe\Adobe Bridge CS6 (64 Bit)\Bridge.exe
    Faulting module path: MMXCore.8BX
    Report Id: c7df83bc-99d5-11e1-9969-1c6f65d33927
    and the following for the crash of the 32-bit version:
    Faulting application name: Bridge.exe, version: 5.0.0.399, time stamp: 0x4f5ec62d
    Faulting module name: MMXCore.8BX_unloaded, version: 0.0.0.0, time stamp: 0x4f308107
    Exception code: 0xc0000005
    Fault offset: 0x6ae31ec0
    Faulting process id: 0xe58
    Faulting application start time: 0x01cd2de2487d6d23
    Faulting application path: C:\Program Files (x86)\Adobe\Adobe Bridge CS6\Bridge.exe
    Faulting module path: MMXCore.8BX
    Report Id: 88541db9-99d5-11e1-9969-1c6f65d33927
    I've rebooted multiple times and tried reinstalling from the upgrade disk, but the problem persists.
    The installation is on a machine dedicated to Photoshop whose system info is included below.  I'm running a multi-disk setup with 1 SSD as my C drive, another SSD for Temp and Scratch (in different partitions on the same SSD), and a RAID 5 array of hard drives for the actual image files.  To my knowledge I'm running with the latest drivers of everything.
    I'm not sure how to move forward at this point.  Any information or assistance would be most appreciated.
    David
    ==================
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
    Physical processor count: 4
    Processor speed: 3410 MHz
    Built-in memory: 16367 MB
    Free memory: 13546 MB
    Memory available to Photoshop: 14755 MB
    Memory used by Photoshop: 87 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: NVIDIA Corporation
    Video Card Renderer: GeForce GTX 570/PCIe/SSE2
    Display: 2
    Display Bounds:=  top: 0, left: 1600, bottom: 1440, right: 2500
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1200, right: 1600
    Video Card Number: 1
    Video Card: NVIDIA GeForce GTX 570
    OpenCL Unavailable
    Driver Version: 8.17.12.9573
    Driver Date: 20120209000000.000000-000
    Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Video Mode: 1600 x 1200 x 4294967296 colors
    Video Card Caption: NVIDIA GeForce GTX 570
    Video Card Memory: 1280 MB
    Video Rect Texture Size: 16384
    Serial number: 91198925890275526270
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: H:\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      F:\, 32.0G, 31.5G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   6,0,29,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Camera Raw 7.0
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Embed Watermark 4.0
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mezzotint 13.0
       MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Sumi-e 13.0
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       Underpainting 13.0
       Vanishing Point 13.0
       Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

    Thanks Curt, but this is not a virus issue.  Think about it, how could the ntdll.dll file be virus infected and yet only impact the running of this single application?  That really wouldn't make sense now would it?  That library is critical to many windows function and if it were virus infected, I would have more things to worry about that trying to get Bridge to launch.
    I already did my homework on that before I posted here and tried some of the things suggested on verifying the integrity of my system files.  The Digital Signature Information shows to be okay.
    It could be that I upgraded this system from Windows XP Professional to Windows Vista Business and that I have an old (CS2) install that I did not remove from the computer.  I have done a variety of things to try and get to the root, but to no avail.  I am sure that if I were willing to start completely from scratch and do a clean install of the OS, I may be able to get it to work.  I don't really have time to do that however, and since I am not the only person who has had the issue with Bridge failing to start, I suspect the solution lies somewhere within the architecture of Bridge in CS6 that is at the root of my problem.
    I am hoping that someone from Adobe will finally figure it out and provide an update that works.

  • Some Photoshop issues after upgrading from CS5 Master to CS5.5 Master

    Hello
    I'm a bit of a noob when it comes to the Adobe stuff. Not so with PC's
    Win 7 SP1 x64 8G RAM etc etc...
    I have a CS5.5 Master License and it is the update from CS5 that has thrown a wrench into my works.
    I had CS5 MAster Collection happily running along; no problems. I decided to buy the CS5.5 upgrade and I installed it in place.... that is, on top of the CS5 stuff.
    Now I have Photoshop problems;
    1.  The upgrade did not over-write my PS 5 directory... it created a PS5.1  Directory. D'oh! No plugins in PS5.1!! Not what I expected at all. I  just wanted it to upgrade. Is it normal for Adobe products to do this (the answer seems to be yes)  and if so how do I get my plugins in the new version? It's kind of a  pain... I have a lot of photoshop plugins... What do most users here do? Uninstall old versions first? Change the "plugins" path? I don't require the older version of PS5 on my hard drive... but now the plugs are in PS5 and the OS opens PS5.1... whoops!
    2. My  Photoshop printing broke in both versions 5 and 5.1. I am just using an  Epson 3880 and when I try to print in PS I get a message to the effect  that the printer is no longer available (it is) and it's the wrong  profile... trouble is... the Printer menu item then becomes greyed  out... I can't change anything. Can't fix. Does that ring a bell with anyone? This seems to be related to the upgrade. My Lightroom 3.x still prints the exact same photo with the same profile and printer just fine.
    So.... If  anyone can shed some light on these two specific issues I would really  appreciatte it! and with so many pieces (it is a huge Suite) would I be better  off un-installing CS5 and then installing CS 5.5? What are the hardcore  adobe users thoughts on best practices for upgrades?
    Thanks a ton! -- David

    1. Yes, Adobe apps always install in new folders.
    2. Try the Photoshop forum for Photoshop specific questions.
    Most of the apps weren't really upgraded. The .1 releases just added CS services as far as I know.
    I just built a new machine and installed InDesign CS5 and then installed the CS5.5 Master Collection. Your needs may vary.
    Bob

  • The Publish button disappeared after upgrading to CS5, how do I get it back?

    I am administrator for a site that just upgraded from CS3 to CS5. Until then there were no problems, other users would send me their drafts and I would publish them. Now the Publish button is gone and I can only review the draft. The users have writer roles, so they cannot publish either. Could you tell me what I need to do in order to get the Publish button back. For example how to change the workflow xml to get the same workflow that I had in CS3.

    Here is the .xml workflow file that I changed a bit, but it still does not work how I want it to and I am not sure where the problem lies. I want to create a workflow where other users in writer roles send their drafts to me and I publish them. I changed the preconditions for publish into "$role == administrator". I don't understand why the button "Send for Publish" does not appear, since it is clearly in the options of this workflow.
    --?xml version="1.0" encoding="UTF-8"?-- --workflow id="AP" name="Author =-- Publish"-- --task id="APT1" name="Author"-- --actions-- --action id="APT1A1" name="Send for Edit" type="SEND" goto="APT2"/-- --action id="APT1A2" name="Send for Publish" type="SEND" goto="APT5"-- --preconditions-- --precondition--$role != publisher--/precondition-- --/preconditions-- --/action-- --action id="APT1A3" name="Publish" type="PUBLISH" -- --preconditions-- --precondition--$role == administrator--/precondition-- --/preconditions-- --/action-- --action id="APT1A4" name="Send for Review" type="SEND" goto="APT6"/-- --/actions-- --/task-- --task id="APT2" name="Wait for Edit"-- --actions-- --action id="APT2A1" name="Edit Draft" type="EDIT" goto="APT3"-- --preconditions-- --precondition--$user != sender--/precondition-- --/preconditions-- --/action-- --action id="APT2A2" name="Delete Draft" type="DELETE"-- --preconditions-- --precondition--$user != sender--/precondition-- --/preconditions-- --/action-- --action id="APT2A3" name="Undo Send" type="UNDO" goto="APT4"-- --preconditions-- --precondition--$user == sender--/precondition-- --/preconditions-- --/action-- --action id="APT2A4" name="Return" type="RETURN" goto="APT4"-- --preconditions-- --precondition--$user != sender--/precondition-- --/preconditions-- --/action-- --/actions-- --/task-- --task id="APT3" name="Edit Draft"-- --actions-- --action id="APT3A1" name="Edit Done" type="RETURN" goto="APT4"-- --preconditions-- --precondition--$user != sender--/precondition-- --/preconditions-- --/action-- --/actions-- --/task-- --task id="APT4" name="To Send for Publish"-- --actions-- --action id="APT4A1" name="Send for Publish" type="SEND" goto="APT5"-- --preconditions-- --precondition--$role != publisher--/precondition-- --/preconditions-- --/action-- --action id="APT4A2" name="Publish" type="PUBLISH" -- --preconditions-- --precondition--$role == administrator--/precondition-- --/preconditions-- --/action-- --action id="APT4A3" name="Edit Draft" type="EDIT" goto="APT1"/-- --action id="APT4A4" name="Delete Draft" type="DELETE"/-- --action id="APT4A5" name="Send for Review" type="SEND" goto="APT6"/-- --/actions-- --/task-- --task id="APT5" name="Wait for Publish"-- --actions-- --action id="APT5A1" name="Publish" type= "PUBLISH"-- --preconditions-- --precondition--$role == administrator--/precondition-- --/preconditions-- --/action-- --action id="APT5A2" name="Return" type="RETURN" goto="APT4"-- --preconditions-- --precondition--$user != sender--/precondition-- --/preconditions-- --/action-- --action id="APT5A3" name="Undo Send" type="UNDO" goto="APT4"-- --preconditions-- --precondition--$user == sender--/precondition-- --/preconditions-- --/action-- --/actions-- --/task-- --task id="APT6" name="Wait for Review"-- --actions-- --action id="APT6A1" name="Review" type= "REVIEW" goto="APT7"-- --preconditions-- --precondition--$user != sender--/precondition-- --/preconditions-- --/action-- --action id="APT6A2" name="Return" type="RETURN" goto="APT4"-- --preconditions-- --precondition--$user != sender--/precondition-- --/preconditions-- --/action-- --action id="APT6A3" name="Undo Send" type="UNDO" goto="APT4"-- --preconditions-- --precondition--$user == sender--/precondition-- --/preconditions-- --/action-- --/actions-- --/task-- --task id="APT7" name="Review Draft"-- --actions-- --action id="APT7A1" name="Review Done" type="RETURN" goto="APT4"-- --preconditions-- --precondition--$user != sender--/precondition-- --/preconditions-- --/action-- --/actions-- --/task-- --/workflow--

Maybe you are looking for

  • Unable to capture the submit button event in OAF

    Hi I am facing a problem extending the NavigationCO controller on "/oracle/apps/per/selfservice/review/webui/ReviewPG". I just want to throw some exception when the user clicks the submit button in the PFR. I have used the following code but i did no

  • Can i get my money back for an app that i do t want

    i just bought my first new mac pro 1 week ago, but i didnt know that the new version of OS X lion was already in this computer, so basically i purchased it for nothing.

  • Stor.e Slim for Mac after password no acced

    Hi, I have a Toshibe 1TB Stor-e Slim for Mac. I backed up all my data on the drive and created a password with the password tool. I had to reinstall my Macbook Pro but unfortunately after that the device is not accessible. I tried to search for the p

  • The Submit button does nothing.  How can this problem be corrected?

    I have seen numerous postings stating that a Submit button on an XFA form will not work.  I believe this may be a widespread problem.  The symptoms are as follows: 1. The form is a Designer form (sometimes referred to as an "XFA form") that contains

  • Archive Enable Standard Transactions

    Hi , I have a requirement in my project to enable two standard transactions (VE01 , S_ALR_87012400 ) to read from archive . I have checked for OSS notes in Service market place , but could not find any relevant one. I am confused and could not think