Stutter in Slow Push-In with Dissolve

I'm working on a G5 running FCP 5.0.4, Blackmagic 8bit uncompressed SD video.
I am dissolving from shot 1 to shot 2. Shot 2 has a slow (2 keyframe) push-in with the in point at the start of the dissolve. After rendering the move, during playback the push-in appears to stutter as the end of the dissolve.
Has any one else had this happen? If so, please help me.
Thanks,
Mike

Did you try the 11.5 RST beta? Load up DPClat and see if DPC conditions are favorable.
What are you using to check graphics performance?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

T520 - 42435gg / Sound stutter and slow Graphic performance with Intel Rapid Storage AHCI Driver

Hi everybody,
I have serious Problems with my 42435gg
Any time I install the Intel Storage AHCI Driver (I've tried plenty of different versions) which is suggested by System Update I experience a horrible Sound stutter and slow Graphic performance in Windows 7 64-Bit.
The funny thing in this case: If the external e-sata port is connected the problems do not occur. If the port is unused again, the stutter begins immediately.
The only thing I can do is using the Windows internal Storage Driver with which I am not able to use my DVD recorder for example.
The device was sent to lenovo for hardware testing with no result. It was sent back without any repairing.
Anybody experience on this?
Kind regards,
Daniel

Did you try the 11.5 RST beta? Load up DPClat and see if DPC conditions are favorable.
What are you using to check graphics performance?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Slow down issue with Premiere CS4 on a Mac pro

I am having a similar slow down issue with Premiere CS4 on a Mac pro, but I don't have bloated prproj file size.
Here is what I am working with:
Mac Pro intel quad core 2.8ghz
OSX 10.6.7 Snow Leopard
6Gigs RAM
3TB storage between 4 drives, each drive with about 50% free space
I am editing a 10 minute HD video from avchd files. The edited video is very heavy in photoshop files with a variety of different fx including green screen. The system has slowed down to almost a standstill. Anytime I move the playcurser, or try to do any action, it displays the spinning top "thinking" icon and takes 15 seconds to several minutes to unfreeze. I am often forced to force quit and I have gotten unexpected quits several times. The program also freezes on startup frequently.
No other programs are running. When I export with media encoder, it took about 4 hours to complete. The last 4 or so photoshop images I added seemed to tip the program over the edge. It had been slowing down some, but those last few really dropped the processing speed. Before those additions, export took 30 min to 1hr.
I did delete the render files (did not check if the file size was bloated beforehand, oops) but it has not significantly affected my performance.

Do you need all of those extra pixels in the stills? Are you panning the full 4976?
Two things to consider are that if you using, say a 1920 x 1080 Sequence Frame Size, you can only see that at any time, regardless of how large the images are in pixels. If there are extra pixels, i.e. the Pan is not using all 4976 pxls., I would Scale to just what you need in PS, prior to Import.
If you are doing any Scale in PrPro, its Scaling algorithms are not as efficient, as those in PS. [Note: CS5 and 5.5 are a major improvement on that statement.]
With many large stills (the max for CS4 is 4096 x 4096, if there ARE extra pixels, pushing those around will use up resources, and quickly. As a test, some years back, I was working on a "photo wall," and was using 4000 x 4000 images. The workstation had no issues with slowness, until I got to the 5th large still. By the 8th, the Project was too slow to edit. I had to wait for everything. Luckily, I have AE, and it handles large stills much more efficiently, and much differently, than PrPro. I just moved to an AE Comp, and completed the Project, finishing up n PrPro, after I Exported from AE.
Just something to think about. With Scaling in PrPro, this is one time, where bigger is not necessarily better.
Good luck,
Hunt

What's difference push stream with server script and push with flash media live encoder??

Hi
I'm multi point push streaming with adobe flash media server 4
Stream structure like this
Open Broadcaster Software (or Flash media live encoder) (RTMP) -> Home Flash media server with multi push script (main.asc)
-> Stream to 2 justintv channels + 1 dailymotion channel (1024x576 , 1750Kbps)
no problem at all when streaming to justintv
but some another stream services have speed problem
ustream can not push with this method
and dailymotion, vaughnlive push speed slow down than OBS or FMLE Direct stream
for example
when direct streaming with OBS or FMLE (Without home server) , no problem at all stream to dailymotion and vaughnlive
clearly no lag
but when push with server script, slow down push speed and unstable (it affect only for dailymotion and vaughnlive streams)
justintv upload speed same as OBS, FMLE's bitrate but dailymotion, vaughnlive bitrate always slower than justintv or OBS, FMLE
Like this - justintv , OBS, FMLE (1750Kbps~2000Kbps) but dailymotion, vaughnlive (1600Kbps~1800Kbps)
I don't understand why have push speed difference between server script push and OBS, FMLE push
Have any reason? and do not have solution???
(sorry for my bad english)

First of all let me clarify that we call multi point publish and it has been explained in detail here
http://help.adobe.com/en_US/flashmediaserver/devguide/WS5b3ccc516d4fbf351e63e3d11a0773d56e -7ffbDev.html
When you do multi point publish(MPP) you publish from one server to another server, when you use FMLE you do a normal publish of stream(s) from a client/encoder(FMLE in this case) to the Adobe Media server.

In finder, or say anything else such as downloaded files, I have to push open with in order to open the file. If I simply double-click on a document from finder, it does not open.

Hey guys. I have this problem where when I try to open say a document from finder, I have to push "open with."
Simply double-clicking does not work. I would greatly appreciate it if anybody could help.
Another unrelated problem is that when I push to open itunes, it says that it is on a locked disk.
Thanks

Select a particular download file. Press COMMAND-I to open the Get Info window. In the Open With section choose the desired default application from the dropdown menu then click on the Change All button.
For .dmg files use DiskImageMounter (System/Library/CoreServices/ folder.)
For .zip files use Archiver - same folder as above - or download TheArchiver - MacUpdate or CNET Downloads.

Slow system – problem with OS, software, memory, hard drive?

I am running a MacBookPro5,3 (Intel Core 2 Duo – 2.8 GHz, Memory = 2 x 4 GB, Hard drive = NVidia 500 GB - 100GB of which is free space), using Mac OS X 10.6.3.
I was running 10.6.6. Then attempted a software update to 10.6.7 and the system essentially stopped working, Was able to back up data using target disk mode, and then reinstalled 10.6.3 using a purchased snow leopard DVD (had lost the disk that came with the computer). Worked for a while but have been having issues with increasingly long and frequent system slow downs (spinning beach ball). Recently attempted another system update, and the update failed and wasn't able to do anything. Used the 10.6.3 dvd and did a disk utility check – it initially said there was a problem with the hard drive – but on another restart from the DVD this issue disappeared (but still no working OS). Attempted connection of my computer to another laptop using target disk mode – this failed to show the target hard drive and only showed the dvd which was in the computer booted up in target disk mode.
At this point rebooted using the DVD and was able again to install system 10.6.3. However, there are still occasions of sporadic slow-downs associated with specific applications (spinning beach ball for anywhere from 5 – 120 sec). Ran disk utility from the DVD again – states that the permissions and the hard drive is OK. Also, ran a memory test (using Rember) which stated that everything was fine (although the test took nearly 2 hours to run and was punctuated by much spinning beach ball activity).
At this stage i am not sure whether I have a problem with memory, the hard drive, the OS or the software. Clearly something is not right – are there any other options to test my system (since I don't have the original dvd – I haven't been able to run a system hardware test) - other third party options?
Thanks in advance for any advice, and apologies for long post.
Rob

Sounds like a failing hard drive or SATA controller. It's not clear whether you have a backup of your data. If not, you should remove the hard drive from the machine and install it an external enclosure or dock, then back it up using another Mac. Then take the unit to an authorized service outlet for testing.

My 2007 mac pro has a slow internet connection with lion

Hi:
I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core. I have os 10.7.3. I use wifi.
Typically, I'll experience difficulty loading websites completely. Certain sites have a 90% failure rate to load most elements. Other sites operate quickly from time to time. Often, a site will simply fail to load at all. My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites. It seems the issue is most likely related to my computer.
Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
Any ideas?
Thank you for your time.

Hi:
I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core. I have os 10.7.3. I use wifi.
Typically, I'll experience difficulty loading websites completely. Certain sites have a 90% failure rate to load most elements. Other sites operate quickly from time to time. Often, a site will simply fail to load at all. My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites. It seems the issue is most likely related to my computer.
Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
Any ideas?
Thank you for your time.

Slow Phone 4s with ios8!! How to make it faster?

Slow Phone 4s with ios8!! How to make it faster? After upgraded ios8.1.1, my iPhone 4s Facebook become very slow response and always hand. Whastapp having same problem! Very lagging with safari too! It is really regret to upgrade since many peoples say upgrade will have this issue always

Slow Phone 4s with ios8!! How to make it faster? After upgraded ios8.1.1, my iPhone 4s Facebook become very slow response and always hand. Whastapp having same problem! Very lagging with safari too! It is really regret to upgrade since many peoples say upgrade will have this issue always

Slow Moving Materials with qty

Dear Experts,
Is there any report to see the slow moving Materials with stock qty ?
Regards,
Manish Jain

Please check this answered link:
Slow Moving Report
slow moving report
Edited by: Afshad Irani on May 19, 2010 10:38 AM

Yosemite download is insanely slow (nothing wrong with my network)

Hi all, I'm trying to upgrade to Yosemite from Mavericks, or rather, I have been trying for the last 2 days. The download from the Mac store is crawling at a crazy slow rate. I've pulled about 1GB in 2 days now. It seems to get like 1MB downloaded every few minutes and the Mac Store progress says there's like 4 days left.
I've run all sorts of speed checks on my network and nothing is out of the ordinary, I can go off and download other files at over 1 MB/sec right now.
I'm at a loss as to what to do, there's not really any support for how to find out what's going on and I don't think there's anywhere other than the Mac Store I can download this from.
Does anyone else have experience with extremely slow, persisting issues with the Mac Store downloads? Any suggestions?
Thank you

I had the same problem with a very slow download of Yosemite, I was using OS X Mavericks. My download was going to take about 2 days at 20 KB/sec and I knew my system was capable of 2 MB/sec or 100 times more speed. My Mac and network connection was otherwise working perfectly and at good speed as is the usual situation. I have an Apple TV and that was working great indicating Apple's giant server system was OK. Very few people seemed to be having this slow download problem.
I tried a number of things without success, including:
- quit all common Mac apps except Activity Monitor
- reboot VDSL modem/router
- reboot Mac
- pause/resume Yosemite download many times (trying to randomly grab a good Apple server/connection)
- try wired connection to Mac as well as Wi-Fi. Both are working fine and capable of 2 MB/sec
- reset Safari (someone said it helped him but I'm not sure why)
- Force Quit process "storeagent" (which does the downloading)
Then I found comments somewhere that indicated the problem might be something related to internet problems in western USA and I was probably using that part of the internet since I am located in west Canada near Vancouver BC. Some people had solved their problem by switching from their ISP's DNS servers to other public DNS servers in the east USA.
My ISP is Telus and I was using one of their DNS servers in my area, as automatically assigned. I tried one of the east USA DNS servers (I think it was a Comcast one) and it didn't work for the download and Safari could not connect to anything. Then I tried switching to the Google DNS servers at 8.8.8.8 and 8.8.4.4 and the download took off at the expected 2 MB/sec and it was done in less than an hour! Another half hour and I was running Yosemite and it runs great on my 2011 Mac Mini.
Here is the procedure that worked for me:
- pause the Yosemite download with the pause/resume button in App Store
- Force Quit process "storeagent" using Activity Monitor (this may not be necessary)
- Quit the App Store
- change DNS Servers to Google DNS 8.8.8.8 and 8.8.4.4 in System Preference / Network / Advanced / DNS. This effects the Mac only.
- for the above step you should write down your original DNS server settings in case you need to change them back
- do some browsing in Safari or other browser to confirm new DNS is working OK
- restart the App Store
- Resume Yosemite download with App Store "resume" button. A new version of process storeagent should start working
- see if it now downloads faster
That's what worked for me. Good luck!

Slow attachment upload with Exchange Web Services (Outlook 2011 for Mac?)

We're experiencing slow attachment upload with Exchange Web Services versus MAPI, OWA, and Outlook Anywhere. I'm not totally certain that it is Exchange Web Services or specifically Outlook 2011 for Mac. I attempted to test with the Mac Mail
App, but it makes it difficult to tell when the attachment has been uploaded and the file has been sent. Here's what we're seeing (10mb file):
MAPI / RPC/HTTPS / OWA: 10-15 seconds upload time
Exchange Web Services (Outlook 2011 for Mac): 60-90 seconds upload time
Thoughts? Any idea why we would see such a drastic difference in attachment upload time? Any way to prove definitively that it is Exchange Web Services vs. Outlook 2011 for Mac? We've tried it from multiple locations with multiple different machines,
and although the upload times vary (some locations have more bandwidth etc) the ratios remain similar.

Hi ,
Does all the user occurred the issue ?
If only special user, I recommend you do the following steps and test:
1.Remove and re-add the email account and check if this helps to resolve the issue.
To remove and add the email accounts:
Open Outlook > GO to Tools > Accounts > Click on "Minus" symbol to remove and "Plus" to add an Email account.
2.Creating a new user profile:
http://support.microsoft.com/kb/2439218/
3. If the issue persists, rebuild the data base and check the results:
http://support.microsoft.com/kb/2360509
You can also post it on Office for MAC forum to get special support about the difference between Outlook and Outlook for MAC.
http://www.microsoft.com/mac/support
Wendy Liu
TechNet Community Support

Lion very slow starting apps with Firewire 800 drive mounted. Any ideas?

Lion very slow starting apps with Firewire 800 drive mounted.
When my Firewire 800 drive is in sleep mode, when I start up an app like MS Excel or Addressbook. I get a spining wheel and a delay before the app launches. Any ideas? Never happened in 10.6.

Long shot: What format is the drive?
Regards
TD

Color Correcting Clips With Dissolves

When you're color correcting clips in a sequence with dissolves, are you color correcting the entire clip or just the part before or after the dissolve?
Do you have to remove other effects to color correct the whole clip?
Sure hope not but there seems to be a color change in playback when I hit the dissolves between clips.
Haven't rendered yet but have made a lot of changes to the color in a long and cutty sequence.

I imagine that the color changes you are seeing are because the sequence is not fully rendered. Do a test by fully rendering just a section.
And yes, you are color correcting the clip including any transitions in and out.
Message was edited by: Michael Grenadier

Outlook 2013 slow to start with Outlook 365 on Windows 7

Hi,
I get to work, start up my PC. It's windows 7.
The first thing I do is kick off Outlook 2013 which piggy backs off office 365.
It takes a minute for the splash screen to appear, another minute of watch dots fly across the splash page then a minute while add-ins get applied.
Why does it take so long for the first two phases to complete?
What add ins do I actually need? I've disabled those I think surplus to requirements, but in reality if Outlook 2013/0ffice 365 need them why do they need to be added in at all?
Thanks.
K
Note: this post was originally at
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/outlook-2013-slow-to-start-with-outlook-365/45b18f1c-5c70-4d69-aea7-4562efbe147f?rtAction=1392808530575
but I have since been advised to post it here to.

Hi,
According to your description, outlook 2013 connects to Exchange online server very slowly.
If yes, we can try the following methods to narrow down the cause of the slow performance:
1. Try start your Outlook in safe mode, and check the launch speed;
2. Check if you have enabled Cache Exchange Mode, if no, enable it and try start Outlook, and check the launch speed;
3. Create a new profile with no email account, try start Outlook, and check the launch speed;
4. Create a new Profile with the other email account, try start Outlook, and check the launch speed;
Since the issue is related to Exchange online, I recommend you ask for help on our Exchange online forum:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks for your understanding in advance.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Very slow download speeds with ATT U-Verse

Hello,
Experiencing very slow download speeds with Macbook Pro 2011, on Lion, and ATT UVerse Max, which should allow for an avg. 11-12 MBPS speed. Instead, I get a fluctuating 60-370 kbps speed. I am not experiencing this problem on my Windows machines (Laptop running Windows 7 and Desktop on XP), it is only affecting the Macbook pro. I wonder if this issue is a known problem with ATT U-Verse and Macs, I spent hours yesterday with their support online and they couldn't help me, stating that from their side all settings were OK; the first representative from ATT re-booted the router remotely and that seemed to work for about 10 minutes, and then it went back to a crawling speed...
Any suggestions welcome!
Thanks

Do you have QOS enabled in your router? Did you try plugging the win7 laptop directly and check the speed?

Stutter in Slow Push-In with Dissolve

Similar Messages

Maybe you are looking for