Stuttering pans and zooms on idvd

I'm having trouble with some stuttering video on pans and zooms when I burn a copy of a short (3 min) project in iDVD. They're basic motion movements created in FCP and play fine in the timeline and in an exported video. I'm exporting a straight Quicktime movie to iDVD (no conversion), yet the pans and zooms stutter. Of note is not all of the movements stutter, only some. Ideas?
Thanks.

First off, I don't have access to DVD SP, but I do have Toast. I just burned a Toast version, and the same problem occurred, though not as pronounced.
Sequence settings are - NTSC DV 3:2, Pixel aspect - NTSC CCIR 601, Lower (even) field dominance.
Stills are .jpg and roughly 720 x 480 pixels in size.
Thanks in advance.

Similar Messages

  • Pan and Zoom (Ken Burns Effect)

    Does iDVD 06 support the Ken Burns Effect? When I import a Slide Show from iPhoto to iDVD it looses the transitions and the pan and zoom features. I can add the transitions back through iDVD, but I can't find anywhere to add the Ken Burns effect back to the slide show? Is it possible? I will be really disappointed if iDVD 06 does not support this feature.

    Welcome to iDVD Discussions.
    I don't use iPhoto, so I can't help you with that, but I can tell you that iDVD does NOT have the KB Effect.
    iDVD 6 Getting Started PDF download
    Apple's iMovie Learning Site
    Apple's iDVD Learning Site
    iLife ’06 Multimedia Tutorials
    General Learning Center
    Ken Stone: Authoring in iDVD 6
    My favorite, by far:
    iMovie HD & iDVD 6: The Missing Manual
    You can download Chapter four: Camcorder Meets Mac.
    iPhoto 6: The Missing Manual

  • Customizing pan and zoom (Ken Burns) slide by slide -- help

    Here's where I am:
    I've imported a bunch of photos into iMovie and they are happily sitting in the Photos Pane.
    Here's what I want to do:
    Photo-by-photo I want to customize the Ken Burns effect to change the zoom and panning behavior.
    Here's what I am doing:
    I select the first photo and change the zoom and pan behavior to my liking...then go to the next photo and do the same, and so on and so on...
    Here's what's happening:
    With each subsequent photo, the previous pan and zoom settings are all changed to be identical to the changes I most recently made (i.e. all my previous changes are "deleted" and now all the photos have the exact same settings).
    What am I doing wrong? Thanks a bunch!

    Sorry to make this such a messy thread! (I couldnt' find any way to edit my previous post, so I am creating a new one summarizing where I am and the problems I am experiencing). I'm about ready to throw my Mac through the
    window...heeeeeeelllpppppp meee.....sssoomebodyyyyy!
    So, trying to summarize my issues:
    I'm having a rash of problems using iMovie.
    Here is what I am trying to do:
    Using photos from iPhoto Albums, I wish to create a movie/slideshow with pan/zoom, transitions, and music ultimately for import into iDVD for burning on DVDs to be views on televisions and/or computers.
    Here's what I am doing:
    1. In the Photo Pan I have the photos I wish to use from an album.
    2. I select one photo at a time, adjusting the pan/zoom behavior and duration one at a time (I realize you dont have to do each separately, but I like to customize this behavior slide-by-slide).
    3. Click on Update after each, thereby landing it in the timeline.
    4. I then selected ALL in the timeline and chose a transition (cross fade) to be applied to all.
    5. Now I've gone back to change the pan/zoom and the length on selected slides.
    6. [This part's a little hard to describe since I think more than one thing is going on at once...] When I change the length of a slide, it recompiles the transitions on either side of it (which I understand) and when it's done, the slide durations of the slides on either side of it have been markedly shortened (like from 4 seconds down to less than 1 second). I'll then get an error message saying the transiton cant be applied to very short clips (which I understand)...
    7. So, I'll then go to one of the recently-shortened clips to lengthen it's duration...and then the process starts over again, with the clip before it getting really short.
    8. The same thing seems to happen if I delete the cross-fade transition and insert a different one...slide durations keeps changing radically.
    In addition to solving the problem above, here's a couple more questions I have:
    1. What part of the process do you set the length of the clips? (I was thining of 4 seconds a piece, but that wasn't long enough to accomodate the 1 second cross fade)
    2. What order should I apply the various settings? (pan/zoom, duration, transitions...)
    3. Later, assuming everything is okay with the timing and transitions and KB, if i want to change one transition between two photos, I tried deleting the cross-fade, then adding a new transtion. But in the process of the timing of the two photos changed preventing the new transition from fitting...). How do I go about this?
    Clearly, I'm missing something here. This is so unintuitave...driving me nuts.
    Thanks a ton for any help you can provide.

  • Is there a way to create a pan and zoom effect in a lightroom slideshow?

    Is there a way to create a pan and zoom effect in a lightroom slideshow?

    Nope. Be a great feature. For that I use FotoMagico after exporting JPEG's from LR.

  • How do I use pan and zoom on vertical photographs without editing out most of the photo?

    I am trying to make a slide show.  When I have a vertically oriented (portrait) photograph and try to use pan and zoom, the feature eliminates much of the photograph.  It seems the pan and zoom feature only works for horizontally oriented (or landscape) photographs.  Is there a way to use pan and zoom on vertically oriented photographs to capture all or most of the photograph and zoom in from there?

    gtavetian
    I decided to use a different strategy to convey the principle. It is most likely that your photos will be 4:3 and you may or may not be taking them into a SD widescreen or HD widescreen project. With all those variables, to get the basic ideas across, I am going to use two models with a generalized scheme.
    For this post....
    NTSC DV Standard Project - Portrait Oriented JPG, in this case 2448 x 3264 3:4. Could be any Portrait Oriented JPEG any pixel dimensions. But best plan ahead for what you have and what you would like.
    Manually set the project preset to NTSC DV Standard.
    File Menu/New/Project and, in the new project dialog, set for NTSC DV Standard.
    Before exiting the final dialog in that area, put a check mark next to "Force Selected Project Setting on This Project". Close out of there.
    Next go to the Edit Menu/Preferences/General and remove the check mark next to "Default Scale to Frame Size". Close out of the preferences.
    In the opened Premiere Elements Expert workspace, use Add Media/Files and Folders/Project Assets to get your portrait oriented JPG to the beginning of the Timeline.The 2448 x 3264 3:4 will overwhelm the space in the Edit Mode monitor. That is to be expected. The Timeline Indicator is at the beginning of the Timeline @ 00;00;00;00.
    a. Click on the Timeline jpg to select it. With Motion Panel/Scale property (with Constrain Proportions with check mark), you want to scale the image so that the whole is shown within the mode space. You want to see the image's bounding box. See the next screenshot. The bounding box is the white outline around the image. It has handles.
    After the scaling to get that look, the important information that you want is on the right in the Motion Panel
    Position values 360.0 and 240.0
    Scale value 14.6%.
    The next phase is as before (See post 21 of this thread...but much of that is repeated below and modified for what is being described at this moment)
    With Timeline Indicator at the beginning of Video Track 1 (00;00;00;00), go to Tools Menu/Pan and Zoom and click on it to open  the Pan and Zoom workspace.
    In the Pan and Zoom workspace, you will see that the feature has created the initial two Focus Frames for you. 
    Do not do anything to Focus Frame 1 in the bin below the image window.
    Click on Focus Frame 2 in the bin below the image window and set the Focus Frame as wanted.
    Click on New Frame in the panel to the left of the image window  to create a third Focus Frame which will appear in the bin. Set Focus Frame as wanted.
    Click on New Frame in the panel  to the left of the image window to create a fourth Focus Frame which will appear in the bin. Set the Focus Frame as wanted.
    Click Done to the Pan and Zoom workspace so that you are back in the Premiere Elements Expert workspace with its Timeline.
    In the Expert workspace,
    Move the Timeline Indicator to the last frame of the selected pan and zoom clip 1. In Applied Effects Tab/Applied Effects Palette/Motion Panel expanded, (Toggle Animation should be active at this point), make sure Position settings are 360.0 and 240.0 and Scale = 14.6% (with Constrain Proportions used).Then go to Tools Menu/Freeze Frame and set the freeze frame for 3 seconds and hit Insert in Movie.
    Then move the Timeline Indicator to the first frame of the selected pan and zoom clip 1. In Applied Effects Tab/Applied Effects Palette/Motion Panel expanded (Toggle Animation should be active at this point), make sure Position settings are 360.0 and 240.0 and Scale = 14.6% (with Constrain Proportions used). Then go to Tools Menu/Freeze Frame and set the freeze frame for 3 seconds and hit Insert in Movie.
    Render.
    The Timeline content sequence from start to finish should be:
    Freeze Frame 3 seconds First Frame of pan and zoom clip 1
    Pan and zoom clip 1
    Freeze Frame 3 seconds Last Frame of pan and zoom clip 1
    Freeze Frame 3 seconds First Frame of pan and zoom clip 2
    Pan and zoom clip 2
    Freeze Frame 3 seconds Last Frame of pan and zoom clip 2
    A Dissolve/Cross Dissolve Video Transition (1.00 seconds) is placed between end of Freeze Frame  Last Frame of pan and zoom clip 1 and beginning of Freeze Frame 3 First Frame of pan and zoom clip 2.
    Additional pan and zoom portrait oriented jpgs to the Timeline would be treated as above.
    What was done above can be applied to any photo with any project preset. The basic idea is to
    a. Start with determing the whole picture Position and Scale values as described with the Default Scale to Frame Size option disabled.
    b. Do pan and zoom with Pan and Zoom Tool in its workspace
    c. Return to Premiere Elements workspace to apply your Position and Scale values to the last frame of pan and zoom clip so that the last frame presents in full clip view. Then go to the first frame of the pan and zoom clip, and apply the Position and Scale values to it so that the first frame presents in full clip view.
    d. If you want the whole view to present for more than that one frame, do the freeze frame at each end, with the wanted duration.
    e. Apply emblessments as wanted, such as video transitions, an animated graphic flying through the last scene, etc.
    We could take this same clip into a NTSC AVCHD Full HD 1080p30 project and do the same, except the Position and Scale values and the Scale % determined at the beginning and used subsequently will be different than in the NTSC DV Standard project.
    Please check out the above and see how you do with it. If problems, please indicate where and we will work through them.
    Thanks.
    ATR

  • How to set the duration of each pic in a slideshow (and also how to pan and zoom)

    I have about 30 pictures I would like to add to a slide show.
    When I add them the duration for each picture is set to 6 seconds.
    I would like this changed to 4 seconds.
    But manually changing the duration of each individual picture, one by one, is a slow and tedious task.
    Is there a way of changing the duration of all my pictures at the same time, from 6 seconds to 4 seconds ?
    Or can I change a setting so that when I insert my pictures the duration is set to 4 seconds instead of 6 seconds ?
    As for the pan and zoom, I have seen the pan and zoom effect but this has a black border around the pictures as they zoom in and out.
    For example, when zooming in the picture starts small with a black border all round the edge.
    When zooming out the picture ends small with a black border all round the edge.
    Is there a way to pan and zoom starting with a full screen when zooming in, and ending with a full screen when zooming out ?
    Thereby not showing any ugly black borders.
    My Nokia N73 phone can do it !
    You can view the pictures as a slide show and when it pans and zooms it looks so much better because it does not show any black borders.
    The picture ALWAYS fills the screen even though it is panning and zooming.

    If you go to Edit/Preferences, you can set the default duration for each slide. This will affect only those photos you've imported into your project AFTER changing this preference.
    You should also turn off the preference for Scale to Frame Size, so your photos do not fill the screen. (And, for efficiency's sake, make sure your source photos are no larger than 1000x750 pixels, per the FAQs at the top of this forum.)
    You can also set the duration of each slide by selecting all of the stills you want to include on in your slideshow, right-clicking and selecting the Create Slideshow option.

  • I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

    I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
    all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
    Rodney
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

    silkman1
    I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
    But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
    know if I am misinterpreting anything that you have written.
    You have a video created in Windows Movie Maker.
    How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
    Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
    From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
    Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
    But, the pan and zoom effect is not seen in playback of the export.
    Is all of the above correct so far?
    If so....we are going to need some more details from you...
    a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
    b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
    Position (for Pan) in the Motion Panel expanded?
    c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
    setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
    I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
    your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
    so that we are in sync to resolve the issue.
    Thanks.
    ATR

  • How to pan and zoom multiple stills in a grid

    Hello,
    happy new year to the community!
    I recently did a lot of research in this forum and for the most problems in my project i could find adequate solutions in PrE 11 which I treated myself to purchase at Xmas
    But there's still something left: I'd like to align several rectangular cells in a grid, each containing a still image that is animated by some pan and zoom.
    I cannot achieve it via the pan and zoom tool since it is restricted to the frame ratio and displays full screen. Then I tried to use key framing for the pan and zoom and cropping the photos. But the crop was scaled together with the photos and didn't remain fix. My last hope was to use an alpha mask which would have the advantage that i could create a fixed grid. But the mask was affected by the animation as well...
    I suspect, after reading the post http://forums.adobe.com/thread/996581, that this is not possible without creating intermediate video files for all photos. So my question is if there's still some way to achieve the task or if it can be confirmed that the intermediate videos are the only way.
    Regards,
    phylome

    The only way I know to do this in Premiere Elements is to create your pan & zoom for each image and then output each using Publish & Share/Computer/AVI with the DV preset.
    Once you've created all of them, put each on its own separate video track, stacked on above the other, sizing and positioning each to fit in your grid.

  • Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen.  They presently move from one to another way too quickly...also need a different pan and zoom option.  Wher

    Just bought Photoshop Elements 13...I'm trying to make a slideshow but can't figure out how to alter duration time that the slide is on the screen.  They presently move from one to another way too quickly...also need a different pan and zoom option.  Where are all the options I had in PS10?  Also...Can I burn this to a DVD?

    The changes have brought improvements but also drawbacks compared with the old slideshow editor.
    The templates are now fairly fixed but I find the “Classic Dark” gives reasonable results with some panning and you can click the audio button and browse you PC for any track. Unfortunately there are only three speed choices linked to the music track. The improvement for most people is that you can now export to your hard drive at 720p or 1080p and upload to sites like YouTube and Vimeo.

  • Pan and Zoom in a Windows instead of Full Screen?

    Hi,
    Tried using the Pan & Zoom and found it very difficult to work with. I had an image I wanted to be displayed on the screen but I only wanted it to use 1/3 of the screen. I sized the image and then went to pan/zoom. The image re-sized to full screen and then from there I could use the tool. Is there a way to use this tool but have the image remain the same size I set previously?

    protivakid
    What are you now using for pan and zoom? Is it the Premiere Elements 12 Pan and Zoom Tool under Tools Menu?
    For starter, please take a look at the Steve Grisetti free video tutorial on the basics of using the Premiere Elements Pan and Zoom Tool as found in versions 11 or 12.
    http://www.lynda.com/Elements-tutorials/Creating-motion-path-Pan-Zoom-tool/109763/117259-4 .html
    If that does not help, we can go into more details, those specific to your particular requirements.
    If all else fails, you can always go the non Pan and Zoom Tool route for your pans and zooms. To do that, you would keyframe the Motion Scale property (Zoom) and the Position property (Pan). See Applied Effects/Applied Effects Palette/Motion Panel expanded to reveal its properties which include Scale and Position.
    Please review and consider and let us know what supplemental information you need.
    Thank you.
    ATR

  • How to Pan and Zoom Video in Photoshop CS6 | The Complete Picture with Julieanne Kost | Adobe TV

    In this video tutorial Julieanne walks you through the best way to pan and zoom a “time lapse” image sequences, video clip and still photograph using the new Motion options in Photoshop CS6. For those wanting even greater control, Julieanne also demonstrates how to use smart objects to take advantage of Photoshop CS6’s new Transform attribute in the Timeline panel.
    http://adobe.ly/LiGN7k

    Excellent video, 5 stars. I would like to see and video about exporting which is mentioned in this tutorial but there isn't such title listed below. Where is that video posted?

  • Pan and zoom

    trying to pan and zoom within still image frame ken burns style. Any suggestions? Thanks

    Set keyframes in your Motions tab.
    Use wireframe/image controls in your canvas window and you can move them around with the A key cursor.
    CaptM

  • Pull out tab pan and zoom option grayed out

    I've been trying to follow this great tutorial about pull out tabs, but have one issue. I've just updated InDesign 5.5 Folio Builder to v.22 and the producer tools to the most recent release on August 7. Here is what I've been doing.
    Create an unassigned box for the tab. Create an unassigned box for background. Create a text box and add text.
    Group all of them together.
    Create an image box (container frame) that is larger than my grouped content and paste the grouped content into it.
    When I select the image box (container frame) and select Pan and Zoom, all options are greyed out.
    If I clear the content from the image box and put a photo in it, I can use the Pan and Zoom options.
    Any ideas on what I'm doing incorrectly? Thanks!
    Tutorial I'm following.
    http://tv.adobe.com/watch/digital-publishing/pull-out-sliders-and-trays/

    Thanks, for the record, I updated my steps to show the correct process.
    Create an unassigned box for the tab. Create an unassigned box for background. Create a text box and add text. Create an unassigned box at the top left to "hold" the tab position to the right side of your document.
    Group all of them together.
    Create an image box (container frame) that is larger than the grouped content and paste the grouped content into it.
    Select the image box (container frame) and choose Scrollable Frame with the options - Horizontal, check Hide for Scroll Indicators, and select Upper Left for Initial Content Position.
    Thanks again Bob!

  • PAN and ZOOM without keyboard

    I use GRAPH 3D on a tactil screen.
    How can I use the PAN and ZOOM fonction ?
    Normay, I must press SHIFT or ALT key, but without key it's not so easy !!!
    Can I do a "simulation" of these key's, with LabView fonction's or with a
    DLL ???
    Thanks in advence (and sorry for my englich... if you speek french !)
    Yves...

    Yves GALLEY wrote:
    > I use GRAPH 3D on a tactil screen.
    > How can I use the PAN and ZOOM fonction ?
    > Normay, I must press SHIFT or ALT key, but without key it's not so easy !!!
    >
    > Can I do a "simulation" of these key's, with LabView fonction's or with a
    > DLL ???
    It might be difficult to create an intuitive user interface, but you should be
    able to accomplish the pan and zoom actions using sliders or buttons on the
    front panel in conjunction with VI Server calls on the diagram.
    Wire a 3D Graph reference into a property node and check out the properties
    that you can set programmatically. I think you'll want to use ViewDistance
    (zoom) plus ViewXCenter and ViewYCenter (pan) to get what you're after. In the
    panel button scenario, you might put a "Zoom In" button on t
    he panel tied to a
    case structure on your diagram that multiplied the current ViewDistance by
    slightly more than 1.0.
    Regards,
    John Lum
    National Instruments

  • Pan and zoom effect

    Hi there,
    How do you create a pan and zoom effect, like a video effect, on a picture? The technical term I believe is the Ken Burns effect from a still imagery. I know it can be done in Adobe Premiere, Final Cut Pro but I want to know if it is possible in InDesign (CS6). It tried the overlays option but it only created pan and zoom effect that the viewer needs to scroll. It want it to move by itself.  I hope that makes sense ))
    Thanks.

    "Make sure that the container frame is smaller than the image. If the width or height of the frame and image are the same size, the object is treated as scrollable content."
    http://helpx.adobe.com/digital-publishing-suite/help/pan-zoom-overlays.html

Maybe you are looking for