Stuttering Playback in Premiere Pro CS4

I've recently been doing some editing in premiere pro cs4 and when i'm trying to playback footage (Pictures or video) it will play fine for about 2 seconds then skip ahead a bit, it does this repetedly no matter what project i'm in. Does anyone know what could be causing this and what i could to to solve it?
System Specs
Q6600 @ 3.2 ghz
1 500 gb HDD / 1 1000gb HDD (both 7200rpm)
Auzentech X-Raider sound card
EVGA 8800GT
Windows 7 RTM
Gigabyte EP45-T mobo

Try my Premiere Pro 4.1 Benchmarking tool to see if your system is misconfigured or improperly tuned. Email me the results and I will try to suggest changes to improve your configuration.
One easy change to your system would be to remove your sound card and just use the motherboard sound chip. Never having heard of that card and knowing that in the past even big name cards have cause problems this might be the first suggestion.

Similar Messages

Slow Playback in Premiere Pro CS4 (how do you lower preview res?)

Hi everyone, I was just wondering how to lower the playback/preview resolution while3 editing in Premiere Pro CS4? I'm editing 720p video (.mov format, that's what my camera shoots in, so I don't think I can change that). All I can see when I right click the source monitor is "Quality > High, Draft, Automatic". Is there anything else I can select? (kind of like in after effects, where you can set it to 1/2, 1/4, etc.). I've been searching the internet for the better part of the day and all I've found is that 'quality' menu I mentioned earlier.
It's still painfully slow to watch on 'draft', and it doesn't look like it makes that much of a difference in quality. Now, my laptop isn't exactly the rendering beast I'd like it to be, but it can handle 720p [slowly] in after effects so I think it should work in premiere too.
Thanks!
PS: Any of you experts think this would be a good computer for NLE / rendering effects?
http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?EdpNo=7192259&Sku=B69- 1277

Thanks for clearing that up!
New desktop it is... I'll probably be swapping out the low power drive for a faster one, since Harm mentioned that in his 'building for NLE' thread.
Oh yeah, one more thing: How can I force it to render? For example, I put an HD clip into the timeline, it has a yellow bar along the top of the timeline in it's location, yet when I hit enter it just plays (with annoyingly low fps)?? Going to sequence > render effects in work area doesn't work either.

No Playback in Premiere Pro CS4

I have been trying to find a solution to this problem for several months now, forgive me if it has already been answered somewhere but I am not able to find the solution. I am using a
MacBook Pro
OSX 10.6.6
3.06 GHz Intel Core 2 Duo
4GB 1067 MHz DDR3
Ever since my upgrade to 10.6 I have been unable to get video clips to playback. The audio plays and the playhead moves across the timeline but the clip is stuck on whatever frame I start the playback at. Also, the play button is gone from the Reference Monitor is missing. I get playback from the Source Monitor just not in the Reference monitor. Does anyone out the know a solution to this issue? I am at my wits end and all efforts to find a solution have not turned up any good info. Thank you in advance for any help.

Here is a sample of a clip that I am editing.
Created on: Feb 3, 2011 9:10:41 PM PST
Report for file: MVI_1078.MOV
General / Container Stream #1
Total Video Streams for this File.................1
Total Audio Streams for this File.................1
Video Codecs Used.................................AVC
Audio Codecs Used.................................PCM
File Format.......................................MPEG-4
Play Time.........................................31s 798ms
Total File Size...................................177 MiB
Total Stream BitRate..............................46.6 Mbps
Video Stream #1
Codec (Human Name)................................AVC
Codec (FourCC)....................................avc1
Codec [email protected]
Frame Width.......................................1 920 pixels
Frame Height......................................1 080 pixels
Frame Rate........................................29.970 fps
Total Frames......................................953
Display Aspect Ratio..............................16:9
Scan Type.........................................Progressive
Color Space.......................................YUV
Codec Settings (Summary)..........................1 Ref Frames
QF (like Gordian Knot)............................0.725
Codec Settings (CABAC)............................No
Codec Settings (Reference Frames).................1
Video Stream Length...............................31s 798ms
Video Stream BitRate..............................45.1 Mbps
Video Stream BitRate Mode.........................VBR
Bit Depth.........................................8 bits
Video Stream Size.................................171 MiB (97%)
Video Stream Language.............................English
Date of Original Encoding.........................UTC 2011-02-01 13:20:36
Color Primaries...................................BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer Characteristics..........................BT.709-5, BT.1361
Matrix Coefficients...............................BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Audio Stream #1
Codec.............................................PCM
Codec (FourCC)....................................sowt
Audio Stream Length...............................31s 798ms
Audio Stream BitRate..............................1 536 Kbps
Audio Stream BitRate Mode.........................CBR
Number of Audio Channels..........................2
Sampling Rate.....................................48.0 KHz
Bit Depth.........................................16 bits
Audio Stream Size.................................5.82 MiB (3%)
Audio Stream Language.............................English
Date of Original Encoding.........................UTC 2011-02-01 13:20:36

Premiere PRO CS4 really slow when playing back AVCHD

Hi,
I'm trying to edit some AVCHD (full HD 1920x1080p) but the playback in Premiere PRO CS4 is really really slow. The quality is set to Draft and even resizing the window to 25% keeps it slow.
So I decided to give it a try upgrading my computer. But... what should I upgrade to improve playback and edit my videos smoothly?
I have this PC specifications
- DualCore AMD Athlon 64X2 6000+ (3.0 GHz)
- 2 GB RAM DDR2-800 (Kingston)
- 1 TB WesternDigital 7200 rpm Hard Drive
- nVidia GeForce 9800 GT (1 GB Ram)
Any recommendations would be appreciated.
Thanks

I need to admint that I made a huge mistake when I got the HD camera in my hands and I started shooting and watching it on a HDTV and it was nicely recorded. But oh surprise!, when I tried to watch it and edit it on my computer it was a nightmare.
Yes, that was what I was alluding to earlier on. It seems to be a good format, but requires an investment in gear to smoothly edit it. I almost feel that there should be a warning label on all cameras, that use it. At least it IS editable, unlike some other formats.
what a nice I/O sub-system article there, thanks for that
I agree, and that is why I try to tell Harm "thank you," whenever I can. He actually did three along the same lines. This was #1, IIRC, with a more generalized followup on the hardware beyond the I/O, and #3 was his setup details for 64-bit OS. All three are well worth reading. He put a lot of time, thought and effort into those. First thing that I did was publish links to each on several Video production fora.
Good luck, and please let us know how your new rig handles the AVCHD material. Before you get too far into things, Harm's other two articles might be of use too.
Hunt

H.264 playback stutter in Premiere Pro CS4

Details:
Adobe Premiere Pro CS4
Intel Core 2 Quad Q6600
3GB RAM
32 bit Windows Vista SP2
I'm having problems with the playback of H.264 video files in Premiere Pro CS4. The files are 1280x720 60FPS clips, ranging in size from 8MB to 40MB, and they were shot with a Kodak Zi8 handheld HD camera.
The clips play fine with the following players on my computer -- VLC, Windows Media Player, and Media Player Classic. However, when importing the clips into Premiere and viewing them either in the preview pane or the timeline, the video is stuttering heavily. This is impeding my editing work as the only way to smoothly view the clips in Premiere is to drop them in the timeline and render the project, but I obviously can't work like this because I cannot render the entire project every time I drop in a new clip, or add an effect, or rearrange a clip, etc.
I'm at a loss as to a solution here, any help would be appreciated.

O.K
Here is what I did.
I just dumped your clip into a timeline I was working on at that particular time - which just happened to be a P2 720p seq.. You dont need DVCPRO CODECS. Use what the demo says. HDV
I only did this to see exactly how compliant your clip was. It turned out to be compliant and editable in an un matched timeline ( Good start).
I throw all sorts of extra stuff at this timeline ( its my base setting for what I shoot and export from) but I usually have to render the extra stuff so as I can play them back smoothly. Thats the way it works. One day ( god forbid) there maybe a preset for a camera like you are using.
I have been doing it for years and rendering is a fact of life. I am dealing with Professional footage including Prores and H264 from D5's etc as well as
my own HD footage and footage from 35mm film cameras.
Your clips are kind of hybrid so you need to expect this. Forget about the demo. Deal with what you have ,convert them or use a different camera.

Premiere Pro CS4 Choppy Playback...

So I have a new HP laptop with the following specs:
HP Pavilion dv7t Select Edition PC
• Genuine Windows 7 Home Premium 64-bit
• Intel(R) Core(TM) i7-720QM Quad Core processor (1.6GHz, 6MB L3 Cache) with Turbo Boost up to 2.8 GHz
• 1GB ATI Mobility Radeon(TM) HD 5650 [HDMI, VGA] - For Quad Core Processors
• FREE Upgrade to 6GB DDR3 System Memory (2 Dimm)
• 750GB 5200RPM Hard Drive with HP ProtectSmart Hard Drive Protection
• 17.3" diagonal HD+ High-Definition HP LED BrightView Widescreen Display (1600 x 900)
Anyway, I'm shooting with a hdslr and I use Neoscene to convert the files. Now, on my much worse (dual core,four gigs of ram,etc)
anyway, If I play a video cip in say, windows media player (after converted in Neoscene) it plays just fine. BUT, when I bring that same file into Premiere pro cs4 it's choppy.
Any help would be great!

Hello all,
For what it's worth I found a fix for virtually every issue I was having with Adobe Premiere pro CS4. I installed a pair of 500gb SATA drives and combined them into a RAID 0 configuration. Then I designated all of my projects' scratch disks to the RAID and no more loading or operating issues.
My system is:
Windows XP Pro SP3 32bit
AMD 64X2 2.6 GIG processor
8 GIGS of DDR RAM
2 TB of storage including RAID-0
Dual monitors run from an NVIDIA GeForce 9800GT w/1 gig of video ram
I edit both HD and 4:3 video and have no issues at all. I was at the end of my rope, looking into purchasing a non-Adobe product when I tried the RAID solution. It worked for me, maybe for you too.
JohnJ

Premiere Pro CS4 and my laptop

Hi everyone,
I'm using Premiere Pro CS4 on my laptop with below specs:
Intel Pentium III Seon 2,27 Ghz
3GB Internal memory
ATI Mobility Radeon HD 3430 (512 MB)
FUJITSU MHZ2250BH G2 (232 GB, IDE)
Windows XP 32 bits with Service Pack 3
Recently i've experienced really bad video playback. When I play a video to start edit it, it starts stuttering. I've tried the settings on "automatic quality" and "draft quality", bot in both situations the same problem. The video i'm editing now is HD1080 GoPro video. Also tried it was an already converted version of this video to AVI.
I expect that a laptop from the time that CS4 came out, suitable for 32bits system, should be working on my (in that time) better than average laptop.
Please let me know if i'm totally wrong and there is no way that Premiere is gonna work on my system!
Thanks in advance,
Danny

System requirements Adobe Premiere Pro CS4
Windows
2 GHz or faster processor for DV; 3.4 GHz for HDV; dual 2.8 GHz for HD*
Microsoft® Windows® XP with Service Pack 2 (Service Pack 3 recommended) or Windows Vista® Home Premium, Business, Ultimate, or Enterprise with Service Pack 1 (certified for 32-bit Windows XP and 32-bit and 64-bit Windows Vista)
2 GB of RAM
10 GB of available hard-disk space for installation; additional free space required during installation (cannot install on flash-based storage devices)
1280 x 900 display with OpenGL 2.0–compatible video card
Dedicated 7200-RPM hard drive for DV and HDV editing; striped disk array storage (RAID 0) for HD; SCSI disk subsystem preferred
For SD/HD workflows, an Adobe-certified card for capture and export to tape
OHCI-compatible IEEE 1394 port for DV and HDV capture, export to tape, and transmit to DV device
DVD-ROM drive (DVD+-R burner required for DVD creation)
Blu-ray burner required for Blu-ray disc creation
Microsoft Windows Driver Model– or ASIO-compatible sound card
QuickTime 7.4.5 software required to use QuickTime features
Broadband Internet connection required for online services†
My harddrive is a Fujitsu Mobile MHZ2250BH-G2 250 GB hard drive. With a Spindle Speed of 5400 rpm. So not the 7200-RPM which is needed for HDV and HD editing?
And if I understand it correctly I would need a 3,4 Ghz for HDV editing or Dual 2,8 Ghz processor for HD editing? GoPro is HD1080, so would need at least the Dual 2,8 Ghz?
Thanks,

Premiere Pro CS4 over remote desktop does not play sequence

Hi all,
I have been researching this issue over the internet but I have found absolutely no references to it:
I am running Premiere Pro CS4 on my high-resource PC but would like to work from a different room so I am remoting form my laptop to my "good" PC.
The system lets me do everything I could normally do when working directly on the main PC with the exception of playing back my edited files (before rendering). This is an obvious handicap since I can not watch my edited sequence and am, therefore, working in the blind. I am able to step through it frame by frame, but when I click the play button, it changes to a pause symbol (as usual) but nothing is shown in the video window. This does not just happen when previewing my edited sequence but also when previewing any imported resource.
Essentially, Premiere Pro CS4 is not playing any video content over a Remote Desktop.
Other normal playback software (such as VLC, Windows Media Player etc...) works though, so it is not an issue of no video playback at all. This just happens when I'm using Premiere Pro.
Any suggestions as to what this may be? Any help will be greatly appreciated!

I was able to edit a full 1080p HD video in Premiere Pro CS5 remotely using HPs RGS (Remote Graphics Software). I had a Workstation at work with Premiere Pro installed on it and all the source footage on it. I was then able to log on remotely from home with my old weak-sauce desktop and successfully edit and play back the HD footage remotely. You just do a google search for HP RGS or go to this link. http://h20331.www2.hp.com/hpsub/cache/286504-0-0-225-121.html
There is a free trial available too. I don't know why there is not more information about RGS on the web, but it seems to me to be the only solution to work on Premiere or After Effects remotely.
I hope this helps

Adobe Premiere Pro CS4 4.0.1

An update to Adobe Premiere Pro CS4 will be available via Adobe Update Manager shortly. The file will also be available for download tomorrow (November 20) on Adobe.com, as will the readme (at http://www.adobe.com/support/documentation/en/premierepro/releasenotes.html). In the meantime, here is the text of the readme.
We're really excited about this update, especially considering we released CS4 just one month ago. To force an update, choose help --> find updates from any Adobe application. The AME update that releases with this update is required as well.
Important note: if you are using the Elemental Technologies RapiHD plug-in, you must update to the latest version in order to use Adobe Premiere Pro CS4 4.0.1. You can update the plug-in by visiting the Elemental Technologies web page: http://www.rapihd.com/?q=node/129
New in this release
- OMF export
- Final Cut Pro import
- Edit in Audition (Windows only)
- Surcode support
- AAF import and export
- High quality motion
- Third-party support
Notable fixes
- Attempting to trim locked tracks results in a crash (#1888355)
- Crash on Win and error on Mac when using Numpad-Asterisk keys to generate marker when
playing in Program Pane when Effect Controls pane is closed (#1890626)
- Crash when the Metadata panel is brought into focus when a DVCPro HD clip is selected
(#1884633)
- When a filter/search is applied in the Metadata Panel and then a different asset is selected, the
filter does not update (#1876954)
- Custom schema causes Adobe Premiere Pro to crash performing many basic operations,
starting with New Project (#1888938)
- Render of transition in imported EDL-based sequence fails; on Mac, causes application to hang
indefinitely, user must be force-quit application (#1873434)
- After ASND is saved, an effect is always ON if it turns OFF while playing (#1864978)
- Crash when attempting to load a project that contains a composition if headless Adobe
Premiere Pro is serving Adobe After Effects (#1871578)
- Exporting video as MPEG 4 will create a video file that imports at the incorrect length
(#1851063)
- Trimming both ends of a clip, then moving the clip will cause looped playback to be silent, or
only playback portions of the clip (#1868409)
- When exporting a timeline containing cuepoints, deleting a cue point via AME Batch-> Export
Settings, the cue point is still present in the output file (#1866690)
- Playing an audio-only file in the source monitor will cause the application to lock up (#1887330)
- Exporting any MT session as 24bit WAV leads to garbled audio Mac only (#1881684)
- Adobe Premiere Pro allocates too much memory and reads too much data from disk when
loading project files on the Mac (#1890579)
- With camera connected, opening clip from Timeline into Source and selecting File  Debug
results in a serious error (#1889197)
- Export to tape is active from DVCPRO HD sequences (#1863718)
- Application intermittently crashes when exporting a movie (#1868405)
- Render and Replace of offline clips takes over 20 minutes (#1885273)
- Application crashes when cancelling Normalize Audio Track dialog (#1887615)
- When an AVCHD clip is inserted into a DV timeline with Scale to Frame Size applied, rendered
previews of the clip show artifacts during Timeline playback (#1863988)
- Using scale to frame size in a timeline lowers output quality and softens detail and sharpness;
typing in scale attributes manually or using Adobe After Effects produces much better results
(#1527669)
- Multiplexed MPEG files exported to HD size and then imported back in to Adobe Premiere Pro
show up as 601 color space instead of 709 color space and hence the colors of the imported
files are off (#1852977)

Other users have reported having trouble with VOB files from DVD recorders. Properly authored DVDs work.
Where did you get the VOB files that won't work for you?
-Jeff

Premiere Pro CS4 (Windows 7) will not (Capture or Record) connect with DV Cass Recorder

For 12 yrs I've Never had a problem w Adobe Prem Pro seeing my Panasonic AG-DV2000, DV cassette Recorder. Premiere Pro CS4 (with Windows 7 Ultimate) will not connect (Capture or Record)with my DV Cassette Recorder - Panasonic AG-DV2000. I upgraded my computer to below components & added Windows 7 at same time. Have had Adobe Prem Pro CS4 since fall with no problems. I usually have 2 - 5 videos, with 2 - 4 audios, going at same time on my timeline. (These digital videos & audios I shot myself professionally with mini DV cassettes.) Most projects are between 10 to 50 mins on timeline, w transitions or crossfades between video & audios. Firewire attached from computer to Panasonic. No Capture card in new system, not needed, use to watch over an external TV, now watch over a second monitor or in program monitor.    [Am I just missing a simple setting??]           Computer below & settings:   very up to date.
motherboard                        ASUS P6T
CPU                                         i 7    2.67 GHz
RAM                                       6 GB
video                                      ATI Radion HD 5700 1 gig Memory OpenGL 3.2
Main Drive                            500g SATA 7200 rpm
Raid Drive                              1.2 TB 7200 SATA
Windows 7                            64 Bit Ultimate
DVD/CD                                  writable Disc Drive
AVG                                        Antivirus 9.0
Playback Settings
                Realtime Playback
yes                                          Desktop Video Display
External Device                    DV 25 720X 576i
Aspect Ratio Conv              Hardware
yes                                          External Device Audio
                Export                     External Device                    DV 25 720X 576i
yes                                          Disable Video output when in background.
24p Conversion Method    - Interlaced frame 2:3:3:2
Preferences          (only things not set at default)
Audio Output Mapping       --   Premiere Pro WDM Sound (have also tried Audio Out)
Device Control     DV/HDV Device Cont Options: NTSC, Panasonic, AG-DV2000P, Auto Detect
                                (Check Status) Says it is ONLINE
Media                     Cache files saved to My Raid drive not C drive (so they will run faster)
                                Indeterminate Media Timebase:   29.97 fps Non Drop Frame
Project Settings Video -- Timecode             Audio -- Audio Samples
Capture Format (tried both) DV & HDV   (all settings checked for during preview & capture)
                Under DV               says Panasonic is Online, export to tape/it renders/Premiere controls the Panasonic recorder -looks like it's recording, but see no video -                                                 hear the sound. On Playback nothing was recorded? ( And Can't capture from tape to computer)
                Under HDV            Says Panasonic is Offline, but computer able to control the Panasonic start/stop, but doesn't record or capture tape to computer?
[ I think this DV/HDV part is correct...... it's getting very confusing at this point??!! Your help is appreciated Thank YOU ]

http://www.studio1productions.com/Articles/Firewire-1.htm
Above article HELPED me -- and is working fine!!
Was an Easy fix, took less than 2 mins.
After a 2 1/2 month ordeal.
Info from the "forum help group" through adobe. jk

Need help with 24fps in Premiere Pro CS4

I am having issues working with 24fps imported video. My computer hardware is an AMD dual core processor running at 2.6GHz. It has 2GB of Kingston Hyper-X memory, 2x 300GB hard drives (not RAID), and an Nvidia 7900GS video card with 256MB video ram. My operating system is Windows Vista Ultimate with SP1. I am running Premiere Pro CS4 with all the current updates.
So here is the issue I am having. I captured video on a Canon XL2 in 24fps, 16:9 widescreen, and 2:3:3:2 pulldown. My CS4 project settings were set up as DV-24P Widescreen 48KHz. I did not try changing other settings on the other tabs. I captured the video directly from the XL2 with no dropped frames. The resulting AVI plays back in Windows Media Player 11 correctly. What I mean by that is the is no jerky video, I get no raster lines, and the video quality is very clear. When I load the video into the time line and play it back in the program monitor the video jerks like it is dropping frames, I get raster lines and it looks like video clarity fades in and out.
At first I thought nothing about it. I used Adobe Media Encoder, and burned a DVD. Playback on my widescreen TV looked jerky, rastered, and the video was only clear in static scenes. So I made some test projects with different settings. Still had no success. The original capture looks good, but whatever I do in Premiere the video jerks and looks like old VHS video.
I did another test. I set the XL2 to 30P and 4:3, and captured the video. Again the captured AVI looks good. Put it on the Premiere timeline and played it in the program monitor. It plays fine - good video quality, no rastering, and no jerking. Made a DVD with no problems in the video. So my question is what setting in Premiere do I need to capture, edit, and export 24fps 16:9 widescreen video so that it plays back with with the same video quality as it was captured? Do you think it is an encoder problem? The captured AVI is what ever encoder came with Windows/Premiere as I have not added any other encoders.
Any help would be apperciated. If I have not supplied enough information, please just ask.

If the video is playing back badly in Premiere Pro from the timeline, then the things I would check would be the program monitor quality - is it set to highest...if you don't know where that it is, click on the 4 horizontal lines in the top corner of the program monitor - make sure highest quality is selected. It also may be a video card issue - are your drivers up to date? If the clips are only playing back badly on the PPro timeline (and anything exported from it), but fine in Windows Media Player - something is up.
As for the frame rate - no, you don't have to work at 24P...as mentioned before, the camera actually records at 29.97 fps, but is able to be played back and edited at 23.976 fps (or 24P)...it's a complicated explanation on how it all works...
If you're going to finish to a regular DVD, then working at 29.97 is the way to go. As for the interpret footage command, highlight the clips in your bin, then right click on them - in the menu, you'll see interpret footage - click on that and a new window should open...you should see a box with a check next to it that says remove 24P pulldown - click it (removing the check) and the footage frame rate should change to 29.97 - then click OK...create a 29.97 sequence (DV NTSC Widescreen 48Khz), and edit away.

Premiere Pro CS4 4.2.1 Halts rendering whatever I ask!

Hi there.
Finally I decided to post this.
I have been tracking in internet this situation for months... since PPro CS4 got out, I have been testing and working with it. However, I cannot say I prefer CS4 to other opponents (even one or two Linux apps oddly). The thing is when an app makes us spectate, we should have results! I cannot go back to previous releases of PPro because I need that queue in AME. So, let me beggin to explain the error:
The application (Premiere Pro CS4 or Adobe Media Encoder [AME]) halts forever when rendering video (a code loop? while "something"="some thing" then do "render frame again"?). So, happening the error in two aplications that use a bunch of files, I must say it is something used by booth like, my guess, PProHeadless. Moreover, the video it might have a filter or not, an opacity key, might be in a diferent format and created within adobe realm, or even outside like Fusion or Combustion, it can stop. And I say can because I am making tests these holy days to reach a conclusion: it's random. It might ocour in frame 150, or in 20 000, with some kind of format video or a filter or everything "as nature as" a PPro captured avi.
Graphics? Updated as today means. Windows? Up to date also! Adobe Premiere Pro? same thing as you already noticed.
This halt is documented by a png file atached to this post. With taskmanager also. That halt is typical. I am in windows 7 64bits, but also have winxp 64bits that produces the same error. The program can only be terminated by process kill and that sort of things.
As I have searched thoughout the internet, I have only seen a post in creative cows that appears similar to this. No luke for a solution yet. When update 4.2.0 came and I had an enormouse reliefe, thiinking it would "heal" the program... no good. I have not been able to respect some deadlines with clients. I will shift if necessary! At least the minimum would be an error ex spit by the program... nothing never came out. I'm blind and adobe might be also. All programs I've try to develop had error mannagement. CS4 release was something apparatuouse but could had wait for a 4.1.0 update in Premiere for instance... I am really tempted for a mac! At least I know what should I buy to make a program run in there... just a mac!
As I see, no software seems to be the problem. It's a fresh install of windows 7 and PPro CS4. Nothing else installed in the system but flash, vlc, acrobat reader MSN live, calim av, proDVD mercalli
Hardware bug or incopatability?
So... my specs if this helps:
Processor:     AMD Athlon(tm) 64 Processor 3500+ 2.21 GHz
Ram:             5,00 GB 667Mhz
OS:               Windows 7 Ultimate 64-bit Operating System
Graphic board: NVIDIA GeForce 7300 LE
MB:               Asus M2N-E with Serial 3Gb/s RAID
Disks:            1 SATA for OS.     SATA Disks for footage and project storage 7000 rotations all I think
I believe everything is Adobe PPro supported... so... where the hell is the problem?
Thanks in advance!

OK
I have been these days arround this issue. Done many troubleshooting... trying to understand problems. Here is what I got:
Getting the hauppauge board off the PC seems to have stopped the "halt" of the encoders and renderings in Premiere and AME. Hope it won't happen again, but, It's kind an exclusion game... What was diferent from the setups I have seen in many forums and posts was this ancient board. Adobe shoulde analyse this one against Premiere CS4 and AME: Hauppauge WinTV-Go bt848 conexant board (or it's a lost of time... as it's not supported anymore in Windows, but is in Linux :] ).
As for the playback... a fine tune for performance options of my graphic board was able to reduce the jerkiness of video... so I had the idea to also overclock both processor and graphics. The result is this:
Before: Processing of video with the timeline in view (default workspace) was allways 100%, skipping so many frames that even entire clips coundln't send a sigle frame. Where only the output frame (ç shortcut) playback was almost aceptable, with processing at 100% and some times going leaving a tiny space for other things to process.... The fine tune of graphics board, was able to get in default workspace the insertion of may more frames in there, and with ç shortcut - output full mode, it was 95-100 spiking frequently between them.
Now: Default workspace: 80% processing... Output frame: 60-70% My pc is now in test to seach for the optimal (aceptable) overclock parameters. And it seems I can overclock even more (not in graphics but the processor).
This is good and aceptable for the computer setup...
However, to everyone reading this, please be very carfull at how you overclock. Be shure you read everything you can find (from reliable sources - your hardware suppliers, as for the processor, the mother board, the graphic board... etc..). If you mess something, better you have the money to replace :].
Thanks for everyting

I need a definitive answer for using Premiere Pro CS4 to work with .m2ts and .mts files

I have a Canon Vixia HF20 and a Sony HDR-XR350V. The Canon gives me .MTS files and the Sony produces .M2TS files. What do I need to do to be able to work with these files in Premiere Pro? I've searched and gotten that I'll need to purchase a codec. But are both file types going to be good with one codec?
Also, what are the steps to getting started? Purchase the codec, load the codec...Will there be any other steps to working with the files in Premiere?
I'm sorry for the basic questions, I'm a photographer! I've never worked with video before, and this is HARD!
Thank you for your help,
Michelle

Hi, Michelle.
I'm nowhere near the authority on this stuff that many of the others are here, but I have Premiere Pro CS4 and I work directly with AVCHD .mts files from my Panasonic camera. I simply browse to the directory where the .mts files are located and drag them into the project. I didn't need to purchase any additional codec, this is natively supported in Premiere CS4.
I can't speak to m2ts files as I don't have any gear that generates them.
One thing you do need to know, however, and this is important. Whether you're running a Mac or a PC, if you're going to work with high def footage such as AVCHD, you're going to need a fairly high performance computer with sufficient RAM, good performing hard drives and a fast CPU.
I tried this on a PC that was fine for my recording studio (audio), fine for professional software development, but choked and stuttered working with HD material. That's not a problem with the Adobe software, it's just the nature of the beast. HD is extremely demanding stuff, so you need top flight gear to work with it. I bought a higher performance PC and now it runs just fine.
Hope this helps,
Chris

Premiere Pro CS4.2.1 preview window has become jerky (more details)

I am using a PC, Quadcore (Athlon II X4) 64 bit Windows 7, 4 internal Hard drives (all single partitions, NTFS), 8GB RAM. I am using Production Premium CS4. My graphics card is an ATI Radeon 4850 running the latest Catalyst drivers (or at least the ones from 3 days ago). I am using 2 TFT monitors, both running at a resolution of 1280x1024.
The hard drives are arranged as:
80GB windows drive (where CS4 is installed): 14GB free
500GB: Cache files stored here: 270GB free
2TB: raw footage for a new project: 844GB free
1.5TB: scratch files and all other project files stored on here: 204GB free
I put in a new Internal 2TB harddrive & installed a black magic plugin for some high def footage (the decklink software from www.blackmagic-design.com)
All preview playback in Premiere Pro has become jerky and unmanageable: only a few frames per second. Before installing the blackmagic plugin playback was smooth with all video sizes, now I can only achieve smooth playback with a tiny (~10% size) preview video.
I tried uninstalling the black magic plugin and changing catalyst control centre settings (regarding playback) neither of which worked. I tried to do a system restore on the windows drive, but this failed. I also tried disabling hard disk indexing for windows search in case this was having an effect, but it seems to have made no difference.
I have tried everything could find on message boards; old DV footage that was fine previously will no longer play smoothly it seems likely to me that this is a software configuration issue.
I have an ATI Radeon 5670 card which I'm going to try today. Other people have mentioned switching to nVidia cards, but I don't want to shell out for a new graphics card unless it is guaranteed to solve the problem once and for all.
Any help would be greatly appreciated, if any more details would be useful then let me know and I'll post more information.

I've just removed a large number of temporary files, uninstalled a few unnecessary programs (e.g. nero) and have moved the swap space away from the OS drive to being spread over the other drives. I've disabled disk indexing, removed unnecessary windows services and run CCleaner. I also followed (most of) your guide on setting a system up for optimum performance.
I should note that Windows Media Player doesn't have a problem with playing large files, and so it appears the problem is localised to Adobe software.
The time taken to render DV footage has increased dramatically almost tenfold. This is something of a guess, but could Adobe be using the CPU to render video instead of the GPU?
This might not be relevant, but the timeline bar flickers when I'm previewing a video.
Disk space is now:
80GB:    43GB free
500GB:   255GB free
2TB:       696GB free
1.5TB:    349GB free
I tried creating a project that didn't use the 1.5TB disk, but it exhibited the same problem.

Premiere Pro CS4 and Canon 600d problems

Hello,
Recently I've been having a few recourring problems when trying to edit footage I captured on my Canon 600D on Adobe Premiere Pro CS4.
The footage shot on the Canon is 1920x1080 at 24fps, when I create a setup preset for these settings in Premiere the clips appear to import absolutely fine. The setup Ive created is shown in the screenshot below.
The problems start when I place the clip on the sequence and render it, once the clip renders the playback in the program/timeline preview window goes all weird and doesn't play the clip properly. Shown in the screenshot below.
First of all I thought this might just be a playback error but when I try to export it as a video file it says error and closes down. This is extremely irratating so i wondered if anyone would be able to offer me a soloution. I have a feeling it may be my setup preset but if so would someone be able to tell me the correct way to set it up for a canon 600d camera because whenever I try a preset found within premiere it exports the video at 720 resolution and very low quality.
Thanks very much for whoever replies, I appreciate it very much
Mike

Ahhh okay that sucks, is there anyway to convert the footage that I already have without drastically reducing the quality as I want my film to be the best quality that is possible?

Stuttering Playback in Premiere Pro CS4

Similar Messages

Maybe you are looking for