Stuttering with windows 8 using version 12

HELP!! I am going mad. Cannot stop the stuttering. Yes I have all the latest updates.

Hi melanie2927,
Thanks for the question. I see that you asked this question a few days ago, and received an answer from brenden dv. Have you given the steps in the following resource a try?:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly - Apple Support
http://support.apple.com/en-us/ts1362
- Matt M.

Similar Messages

Problem syncing 9360 with Windows Calendar using version 7.0

Hi. Since downloading BB desktop version 7.0 I am no longer able to sync my contacts, calendar, tasks and memo functions from my Curve 9360 to my laptop using the USB connection. When I attempt to do so I get the following error messages:
'Synchronisation Error - Error while reading field value'
also:
'Synchronisation Error - Error opening data store accessor object'
Also when attempting to configure and sync the MEMO function I get the following error message:
'The organiser applications on your computer aren't supported
Does anyone have a solution to this? Thanks

same problem here, need help. All was fine till i updated the bold9000 to 5.0 and than the same error on all my blackberry syncing devices Torch9800 and the bold9000. Message is in german:"Fehler beim öffnen eines Datenspeicherungs-Zugriffsobjekts" english:"Error opening data store accessor object".
I dont understand how this could happen.

How to connetct macair with windows laptop using wifi

how to connetct macair with windows laptop using wifi

m8,
You might need to download the latest driver for your Dell Latitude(D600). PAN(personal Area Networking or Piconet) is just one of the profiles(device support/services) of bluetooth(SIG). Blue Soleil are only for that blutooth that uses that chips, like that of widcomm. Toshiba/HP laptops have updates for their bluetooth I can't see why Dell wouldn't have also. And check if the driver,is one that is known to work with Nokia phones.
Good luck.
Message Edited by android on 25-Feb-2008 12:52 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Dashland plug in does not seem to work with my mac using version 33.1

I've followed instructions on uninstalling and then reinstalling the dashland plug in of my Mac using version 33.1. I just upgraded to 33.1 and Dashland is not working at all. Is there a workaround? Could I use the older version 33.0 until there is a bug fix with Dashland?

Several users have reported an issue with Dashlane according to comments on their Facebook page (note I do not use this software myself). However, this does not appear to be a Firefox issue, so you should contact Dashlane to see how you can get this problem resolved:
* http://support.dashlane.com/
* http://support.dashlane.com/customer/portal/emails/new

Dolby 5.1 with Windows 7 using an Audigy Platinum EX

Hello.
Long story short.
I've mashed together three old PC's to make one reasonably ok one as a media center.
I have an old MSI motherboard, running an AMD XP 2.GB Chip with .25GB of Ram and an AGP Video card (Soon to be upgraded to an ATI 4850 AGP Card with HDMI out.
My trusty Audigy Platinum EX has been re used (again!) and after finding some drivers, everything seems to be ok!
What's the problem you ask?
I cant seem to get true 5. surround, via the on board optical out (speaker calibration wont play front centre, sub or rear speakers.)
I'm running the lot through a Creative 5. Inspire speaker system (using the optical input) if i let the Inspire system sort out the sound, I can get surround, but only if i switch on the 5. manually, and like I said, it won't play via the speaker test in windows or the creative consul on screen.
Am I missing something real simple, or is this an issue anyone else has had dealings with?
Also (as if that weren't enough) there doesn't seem to be any support for the EAX and ESS systems, and I cant use the remote control that came with the Platinum EX.
If anyone can offer any sugestions, I'd be most grateful.
With Thanks.
Andrew. (UK)

Hello again.
I've got hold of a Vista Support Pack that supposedly fixes loads of the issues I've got with an old card on Windows 7, I've pasted the notebook specs and details that came with it, and if you've any idea how I can put a downloud link on this forum so you can download it from me, you are more than welcome to try it. I'm not knowledged enough to put a link on here, but others have done it, so it must be possible... Any Ideas?
Here Goes!!!
Sound Blaster Audigy series Vista Support Pack - Compiled on Feb 24 2008 by Daniel Kawakami
Changelog:
* 02/24/2008:
- Finally fixed Speakers and CMSS setting synchronization, so Audio Center was removed.
- Completely uninstall the previous version, including all applications, before installing this one.
* 02/2/2008:
- Under certain circunstances, Speakers and CMSS setting are still not synchronized.
- Now includes the full featured Creative Graphic Equalizer, with Preset saving, see screenshot below.
* 02/9/2008:
- Changed the driver version from v2.5.0004B to v2.5.0004EQ (with Equalizer).
- Windows speaker settings are now synchronized with Audio Console / Speaker Settings speaker configuration.
- Enabling CMSS in Audio Console or EAX Settings now properly activate effects in Creative APO; Stereo focus slider does not work, so Audio Center is still required for that.
- Audigy 2 ZS Notebook is now properly supported / detected by Setup
- Completely uninstall the previous release before installing this one.
Supports both 32-bit and 64-bit versions of Windows Vista (including Service Pack ).
Supports all Audigy card with a Hardware EMU0K2 DSP chipset (OEM / Retail models):
- Audigy (including ES, MP3+, X-Gamer and Platinum)
- Audigy 2 (including Value, Platinum and Platinum Ex)
- Audigy 2 ZS (including Platinum and Platinum Pro)
- Audigy 4 (including SE and Pro)
- Audigy 2 ZS Notebook (PCMCIA) - Uses software MIDI emulation that does not (currently) work in Vista.
Does NOT support the following OEM / Retail models:
- Host / software-based cards including Audigy LS / SE / Value, Audigy 2 SE, Li've! 24-bit)
- any external Audigy soundcards
Integrated setup program to install the following items:
- Audigy series driver 2.5.0004 (the latest X-Fi driver)
- APO Interface Module .30.00
- Audio Console .20.57 (including Graphic Equalizer)
- EAX Settings .0.05
- MediaSource DVD-Audio Player 2.00.76 (32-bit only)
- SoundFont Bank Manager 3.20.20
- Speaker Settings 2.00.60
Exclusi've features in this unofficial driver:
- Equalizer
- CMSS and Stereo Surround with Stereo focus control
- Advanced EQ and Special FX available (see notes below)
- Dolby/DTS decoder (working on 32-bit/64-bit, requires Windows Vista Service Pack )
- DVD Audio (32-bit only)
- Hardware MIDI synthesizer (includes 2Mb, 4Mb and 8Mb SoundFont banks)
- 4 Gb RAM approved (tested on Intel C2D E6400, Gigabyte 965P-DS3, 4Gb RAM)
Release notes / Known issues:
- Windows Security warning during driver installation
When prompted with ?Windows can't verify the publisher of this driver software?, choose ?Install this driver software anyway?.
- MediaSource DVD-Audio Player requires Audigy 2 or better
Do not install if you have the first Audigy model.
The application does not support Windows Vista 64-bit and setup will close with an error message.
- WaveRT Pull Mode enabled by default
Does not seem to cause any problems, but if you ever need to disable it, follow these steps:
- run the Registry Editor (Regedit) and open the following registry tree:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class
- select Search (or press the F3 key) and type EnableWaveRTPullMode, deleting the value when found.
Restart the computer.
For more information on WaveRT, access:
<a rel="nofollow" href="http://www.microsoft.com/whdc/device/audio/wavertport.mspx"]http://www.microsoft.com/whdc/device/audio/wavertport.mspx[/url]
- Built-in Decoder (requires Windows Vista Service Pack )
To use the built-in decoder, make sure it is enabled in Audio Console.
Select ?SPDIF Out (Creative SB Audigy (WDM))? as the output device of
your player and then configure the AC3/DTS filter to send the stream
through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
- EAX effects, Advanced EQ and Special FX
EAX effects only work in 4., 5. e 7. speaker settings.
Advanced EQ and Special FX only work in 2. speakers or Headphone settings.
- EAX effects, Advanced EQ and Special FX (Using SPDIF Out)
All effects work properly, but when you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
- There is no sound in games with OpenAL support or using Creative ALchemy
Disable Advanced EQ and Special FX selecting ?No effects? before running the game or program.
- Equalizer settings are lost
It happens after you run a game with OpenAL support or using Creative ALchemy. This issue also occurs in Windows XP, so it is not specific to this Windows Vista driver.
When you restart the computer or run Equalizer, the saved setting is automatically loaded.
- No sound when CMSS is enabled using Audio Console (4. or more speakers)
Just move the Stereo Focus slider and set it back to the desired position, even if it is 0 (zero). Once the setting is saved, works properly. This issue does not affect EAX Settings.
- Windows Vista MIDI Device Configuration Utility
Use this utility to change the MIDI playback device for 32-bit and 64-bit applications.
The driver installer automatically selects the first hardware MIDI synthesizer found.
Note: The Audigy 2 ZS Notebook (PCMCIA) does not have a hardware synthesizer.
Some screenshots:
- Equalizer:
- Stereo Surround:
- Decoder:
- Mplayer Classic: select ?SPDIF Out (Creative SB Audigy (WDM))? as the output device of
your player
- Mplayer Classic: configure the AC3/DTS filter to send the stream through SPDIF
- Hardware MIDI:
Hope this is of some help?
Let me know if you've any idea how to upload the programme!!
Kind regards.
Andrew.

Hot Sync problems with Windows Vista using a Tungsten E2

Need Help solving a hot sync problem. Have a Tungsten E2, about a year old. Use Windows Vista OS. Can not sync to desktop. It worked fine for awhile then stopped sync'ing. Have reinstalled Palm Software, Have downloaded Palm 6.2. Have deleted all 3rd party apps,,,and their back up files. Particulary,,,,Epocrates apps, Took over my PDA. Installations and updates gets to synchronizing Calender and 'freezes' have left it on overnight figurng lots of data,,,,no progress. I need help. I really enjoy using this equipment. I use my PDA for all my scheduling of work shifts appts etc. I would appreciate some suggestions. Thanks in advance. Mike.
Post relates to: Tungsten E2

Hi.. Welcome to the Palm forums. So if I am understanding you when you try to sync it goes to calendar and freezes and never completes the sync. That being the case the first thing you want to do is go to the conduits and turn off calendar then sync and all should be successful, except calendar will not sync. What this indicates is that you have corrupted data in your calendar, most likely on the E2. Do a google search on your computer for a utility 'dbfixit' and download it to your computer. Extract it so you have the dbfixit.prc file and double click on it to put it in the installer. Then, insuring the calendar conduit is off, sync to install it. Once installed run dbfixit. This utility is free or can be purchased for (I believe) 12.95. The free version will search for corruption and problems let you know where they are and you will have to manually fix or delete them. If you register it, when you run the utility it will find the errors and fix them as well. Once all errors are fixed, turn the calendar conduit back on and you should be able to sync.

ITunes "severe problem" with Windows XP Pro - Version: 6.0.2

I installed iTunes 6.0.2. It worked fine at very first time after that it refuses to reconzie my iPod. After installing iTunes, when i connect the iPod i got the New device found icon in the system tray and my iTunes got opened with my iPod detect in that. Then i uploaded my songs photos in it. Then safely removed my iPod. The next time onwards i connect my iPod my Windows XP detects it show icon in the system tray for new device found open iTunes but iPod is not detected in iTunes I tried install/uninstall/repair everything with iPod and iTune. (Tried all the possible combination and evrytime ending up my box rebooting...pathetic with no results )
I can't believe that Apple is boneheaded enough to release a version of iTunes that was buggy to Windows XP Prof machines, so if anyone figures out what's specifically wrong with a few including mine, please shout out.

Chech this link..i am not the only one
http://www.versiontracker.com/php/feedback/article.php?story=20051111211059649#c omments

Help with windows Prcesses - using "com.jniwrapper.win32.process.Process"

Hi everybody,
I'm trying to get a list of running processes, and for each process I need its Process ID, Process Name, and the command line that run this process.
I found a way to get everything but the command-line, by JNI wrappers (below are links to their documentation).
com.jniwrapper.win32.process.CurrentProcess (has the method - getCOmmanLine() ) :
http://www.teamdev.com/downloads/jniwrapper/winpack/javadoc/com/jniwrapper/win32/process/Process.html -
com.jniwrapper.win32.process.Process
http://www.teamdev.com/downloads/jniwrapper/winpack/javadoc/com/jniwrapper/win32/process/Process.html
I wrote the following code :
String a, b;
List processes = Process.getProcesses();
for (int i = 0; i < processes.size(); i++) {
Process process = (Process)processes.get(i);
a = "process: FileName = " process.getProcessImageFileName();
b = "id = " process.getProcessID();
But I need to create an object of "CurrentProcess" (that extends Process class) in order to get the command-line. However, this class only has an empty constructor:
CurrentProcess() - Creates an instance that corresponds to currently running process.
and I don't understand what does "corresponds to currently running process" means (Cause there are many running processes) , and how to use it in my code.
I would appreciate you help very much!
Thanks,
Nofar.
Edited by: Nofarb on Jul 11, 2010 2:38 AM
Edited by: Nofarb on Jul 11, 2010 2:41 AM

I'm trying that as well, :)
I was hoping maybe one of you have some experience with that.
Thanks anyway.

I have a HP compaq desktop computer with an Intel Pentium 4 with Windows XP Professional Version 2002 with Pack 3, how can I find out if it has SSE2 on it.

I am trying to find out if my computer uses SSE2 and how can I find this out. I am not sure of all the information you need to answer my question, if you need more please let me know and what it is. Thank you

http://en.wikipedia.org/wiki/Intel_Pentium_4
Instruction set x86 (i386), x86-64, MMX, SSE, '''SSE2''', SSE3

I have an iphone3gs which needs itunes 4.1 otherwise it doesn't restart. But 4.1 is compatible with windows 64 bits version. How am I gonna solve this? There are no on line solutions

I have an iphone 3gs which needs itunes 4.1. Otherwise it doesn't restart.

I have an iphone 3gs which needs itunes 4.1. Otherwise it doesn't restart.

Can't pair Windows 7 PC with 6500 slide using blue...

I am having problems connecting my Nokia 6500 slide to my new PC with Windows 7 using bluetooth. I am able to connect one time after installing Ovi Suite and sync with outlook, but when I try a second time, it can't connect to the phone. Reboot doesn't help.
I also tried to uninstall Ovi Suite and install PC Suite, but the exact same thing happened.
The IT department at the company I work for have not heard of similar issues.
Any help will be highly appreciated.
BR Jakob Carlsen

It seems that connection and sync is working until I try to use the Nokia Phone Browser under Win 7. After that the phone becomes unreachable via Bluetooth.
Phones firmware is on the latest version 10.0.0

Using traditional nidaq with windows 98

I have an e series DAQ and I want to use it with Windows 98. The software that came with the board (NIDAQ7) will only install on Windows 2000/NT/XP. Can I get hold of an earler version of NIDAQ so I can avoid changing my operating system?
I want to use Traditional Nidaq.

Hi,
The driver that you will need for E series board with Windows 98 is version 7.1. This can be downloaded here.
Have a Great Day!
George

HT5628 How start with windows 8 automatically using bootcamp?

How i can start with windows 8 using bootcamp?

When booted under MacOS, you can go to the System Preferences and select your "Startup Disk". This will allow you to indicate which partition you want your computer to boot from normally, or on just the reboot that you are initiating at that time. If you have already installed the Boot Camp Utilities under Windows, you can do similar from the tray icon that it loads. If you boot your Mac from teh Recovery Partition, one of the menu options is to specify the Starup Disk. You have many options to choose from.

HT1349 I have a laptop computer with Windows 7, powered intel core i7. I am trying to download a purchased movie from ITunes. I am on wifi g. Why is it taking 17 hours to download a simple movie? This is nuts!

Question: Why when downloading a purchased movie from ITunes does it take 8 to 17 hours to download? I have an HP Laptop with Windows 7 using a core processer i7. This is the second day to try to get the movie downloaded and I still cannot watch this movie. Seems like a problem with ITunes or a scam. I use a IPhone 4 with little issues, But when using this lap top -- it is a joke.

First thing to do is get the CC off your system. Then try the direct download option linked below...
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

Palm m500 Hotsync with Windows 7 Home Basic - 32 bit

I have a couple of old, but ever so useful, Palm m500/m505 PDAs, which I could hot-sync with my old PC running on Windows XP. Now I have up-graded to PC with Windows 7 Home Version - 32 bit and am at my wit's end trying to hot sync my PDA data on to my PC Palm Desktop.
I tried hot-syncing by installing Palm Desktop 4.1.4. and Palm 6.2. Have both on my PC. It did do a hot-sync but only to back-up data. I need to view the data on my PC/Monitor.
As I am of the older generation, (a senior citizen), could an expert give me step-by-step simple instructions on how to resolve my problem. My Palm m500 PDA has too many contacts to manually transfer.
Also can I convert PDA contacts to Outlook Address Book and then hot-sync with Palm m500 series PDA ?
Waiting anxiously for help and guidance ..........
Myra

You can give this a try if you havent done it yet...
How to import the Address Book from Palm Desktop to Outlook
You may need to install this too if it is Outlook 2007
Outlook 2007 Update (Windows installer) for Palm OS
For other outlook versions download from this link:
Downloads
There is another post that said you may be able to transfer it using the Infrared feature in the device.
Check POST
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Stuttering with windows 8 using version 12

Similar Messages

Maybe you are looking for