Stuttery audio when using ATV as airtunes

I've had no significant problems with ATV in most use cases, but - when streaming music from my Mac over airtunes, I get a bunch of dropouts. The ATV will just go silent while the mac keeps playing; ATV picks up again, with differing amounts of stutter.
The Mac is about 30 feet from my base station with a bunch of stuff in between - including a microwave - but manages to maintain full signal most of the time. The ATV, by contrast, has a direct line of sight to the base station over about half the distance.
The signal should be going via the base station, right? Or is it going directly to the ATV? Anyone else had issues like this?
thanks
-jk

I had the problem if trying to stream to an Airport Express (wireless) and AppleTv (wired) at the same time.
Not tried with 2.01 as I don't really use the feature.
AC

Similar Messages

  • HT201177 no audio when using a mini display port to HDMI cable to TV on my Macbook pro

    no audio when using a mini display port to HDMI cable to TV on my Macbook pro. can only see the video

    I keep saying this over and over, in the hope that people who do a search will find it.  Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there.  The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple.  They're expensive, but they work perfectly.
    My guess is that you bought a cheap MDP to HDMI cable, or have a defective one.  From my reading of these boards over the past few months, cheap cables have a high failure rate.  And the regular priced ones have only a slightly less of one.  Try a new one.  Make sure you do not damage the Thunderbolt port.

  • How can i detach the video from a clip so i can only use the audio when using imovie?

    how can i detach the video from a clip so i can only use the audio when using imovie?

    First, go to iMovie/Preferences and enable the Advanced Tools.
    Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

  • How do you turn off Flash audio when using captivate Nav bar?

    Hi Guys and Girls
    I have an imported flash file that plays an audio track,
    I have no problem turning the audio off, when the user uses
    the button within the flash file to go to the next slide in the
    captivate movie...
    on(release){
    stopAllSounds();
    _root.rdcmndNextSlide = 1;
    BUT if the user decides to use the navigation bar within the
    captivate movie it all goes pair shape.. The flash audio continues
    to play into the next slide. Anyone have a know how to solve this
    problem?
    How do you tell flash to stop playing the audio when using
    the captivate navigation bar?
    (The flash file is a flip book and the audio NEEDS to stay
    within the flash file)
    Cheers
    Aquil0

    Thank you! Thank you! Thank you! This totally solved my issue. I had a Captivate 4 movie using an embeded animation that had audio. It would play the audio again when the next slide appeared. I have to use Captivate 4, because my audience still uses Flash 7 (yikes). However, if you have Captivate 5 and are having this problem there is a widget that solves this issue: http://blogs.adobe.com/captivate/2010/11/animations-%E2%80%93-audio-sync-issue.html#commen t-3872
    Thanks!
    EliteEraser

  • HT201335 I can only get audio when using airplay through sky go on my apple tv on iphone 4

    I cn only get audio when using airplay through sky go on my apple tv on iphone4. Any ideas?

    Sky go is an app that does not support video AirPlay, not all apps do.

  • I have no audio when using chrome

    I have no audio when using chrome. I have audio when using Internet explorer and when playing from my pc. I have tried uninstalling chrome and flash player then reinstalling them. have tried FAQ on chromes site and Adobe's site. did not work.

    Hi Funkd, 
    The video / audio team is still hard at work trying to fix the audio problems introduced in 11.3.  Would you be willing to test a build of Flash Player that contains a few changes and additional debug logging functionality?  If so, please contact me directly at [email protected]
    Thanks,
    Chris

  • When phone not muted, why isn't there any audio when using facetime?

    When phone not muted, why isn't there any audio when using facetime?

    What version of iMovie?
    What camera?

  • No audio when using FaceTime on iPhone.

    No audio when using FaceTime on iPhone. The video works, but just static is heard during call. I have attempted multiple calls to another iphone and my mac. Should I send the phone in for repair?

    Hi Anne-Lill Holme,
    Thanks for visiting Apple Support Communities.
    If you are not being heard during FaceTime calls on your iPhone 6, I recommend starting with these troubleshooting tips:
    Restart your device.
    If using FaceTime over a Wi-Fi network, go to the steps to resolve Wi-Fi network issues.
    From:
    iOS: Troubleshooting FaceTime
    Next, I recommend testing your iPhone 6 microphone in other applications, such as Voice Memos. 
    If you cannot be heard on recordings in other apps, see this article for additional troubleshooting help:
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    Best Regards,
    Jeremy

  • How to sync/edit audio when using frame freeze or time remapping?

    how to sync/edit audio when using frame freeze or time remapping? in premiere pro cs6

    You need to give more information about what you want to happen to the audio when you freeze or time remap the associated video.
    Is it synch video?
    Is it music?
    Is it Voice?
    Generally .. you have to cut and design the audio around the video effect.

  • Has anyone experienced the loss of audio when using Apple TV when it has been working fine?

    I can't get any audio through my reciever when using Apple TV. It's been working fine until a week ago. I've check my reciever, unplug the TV, and Apple TV as described but nothing. I switch to my Direct TV input and I can get audio when not using ATV. I've tried most everything I've read on blogs but nothing. One of those "pull your hair out" issues. Any direction would be appreciated. Thanks, Vince

    Hi there Vfall!
    I have some information for you that can help you troubleshoot this issue:
    If you can see video but can't hear sound
    If Apple TV is connected to a receiver, make sure the receiver is turned on.
    Make sure the input setting you've selected on your receiver matches the input you have your audio cables connected to. See the documentation that came with your receiver for more information.
    Make sure the volume on your TV or receiver is turned up and isn't muted.
    Check whether you can hear sound while playing video only. Also, check whether you can hear audio feedback while clicking through menu options.
    If you're connected to the HDMI port on your TV and Apple TV, make sure your TV supports audio through its HDMI port. The HDMI ports on some older TVs support only video.
    If you are using HDMI audio, try disconnecting and reconnecting the HDMI cable.
    If you're connected to the HDMI port on your TV and Apple TV, make sure your TV is setup to receive audio from HDMI. For some TV's this is automatic, but for others there is a choice between digital and analog (for HDMI audio, choose digital). Read more about HDMI audio.
    Try the other audio outputs on Apple TV to see if they work.
    If possible, try using different audio cables.
    This information is taken from the following article:
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/ht1551
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • No Audio When using Video Out to Firewire

    I do not get any audio when I use Firewire ntsc as my video out. When I set video out to canvas playback then I get audio. I want to use print to video but I cannot because the audio will not work with Firewire. I get the image on my external monitor but not the audio. I checked to make sure and the audio was not on the recorded dvd. I cannot not use print to video with canvas playback.
    My Easy Setup is Format: NTSC, Use DV NTSC DV Converter. I tried using Firewire basic and got the same results.
    Please Help
    Ken

    The audio does not play at all from the timeline if video out is set to Firewire. To answer your question, no the audio does not play in the external monitor when playing back from the timeline when Canvas is used as the video out. However, I don't believe the converter box is the problem. The audio would play in the internal speakers when using firewire as video out but it does not.
    Is there a problem with FCE 4?

  • Buzz In Audio When Using DVI Output

    I've had this problem for a while now, but everytime I plug in a monitor to the DVI port I get a horrible buzz out of my audio interface. I've tried everything: using different DVI cables and audio cables, using different audio interfaces, disconnecting everything except the necessary things, etc. and no matter what, the buzz comes when I plug something into the DVI port. I'm assuming that this has to do with the video card, I'm just wondering if anyone else has had problems like this.

    Are the TV and the Mac plugged into different wall outlets in the room? It could be they are on widely different circuits, considering the wiring behind the wall, and that stray currents are flowing through the signal cables and upsetting the signals carried on those cables.
    If the above is true, try plugging the TV into the same outlet as the Mac and see if things improve.

  • Call Pickup - Users experience One Way Audio when using Call Pickup Orbit to pickup internal calls with internal Lync 2010 Callers

    Hi
    Noticed an issue where when using Call Park Function with users you receive one way audio when answering the call
    The scenario is
    1) If a user is internal and is homed on Lync 2010 Pool and calls an internal user who is homed on a Lync 2013 Pool and another internal user homed on a Lync 2013 Pool picks up the call with Call Pick Up orbit, Lync 2010 users only hears one way audio and
    same for user who has picked up call
    2) If the scenario is an External PSTN call or another Lync 2013 user these calls are fine
    In Lync Tracing logs a SIP/2.0 481 Call Leg/Transaction Does Not Exist error is returned
    Is this a known bug or expected behavior - Call Pickup is basically useless until all users are migrated to Lync 2013 as there is no way of a user knowing whether call is internal or external and if the user is on Lync 2010 or 2013, obviously in my
    large organization 2000 users no an overnight thing
    Coupled with the fact no Team Call Group\ Simultaneous Ring can be in place for Call Pickup to work im thinking Call Pick Up is not going to happen for awhile
    Is there any fixes\ developments that may help this issue or is there a setting I am missing

    Hi,
    Please install latest update for Lync Server 2010 and 2013.
    http://technet.microsoft.com/en-us/lync/dn146015.aspx
    If the issue persists, please enable logging tool on Front end and Mediation server to get trace for troubleshooting.
    http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
    sure that you completely understand the risk before retrieving any suggestions from the above link.
    Kent Huang
    TechNet Community Support

  • No Audio when using firewire DV

    Hello!
    When I set SoundTrack to play the video using my firewire DV device (a little camcorder attached to an analog TV set) it reroutes all audio to that camcorder instead of using my otherwise fully functional 5.1 audio setup.
    How can I keep the audio playing through my external (USB) 5.1 audio setup while routing the video to an external firewire MiniDV camcorder?

    I've had a similar problem and posted a few questions myself regarding the "no audio" when going from FCP to STP.
    But I figured it out: If you connect a DV cam via Firewire, the audio in STP is routed to the camera only.
    In my case I also have a MOTU 828MKII audio interface connected via a separate FireWire, but it seems that in STP only the DV cam get the audio.
    As soon as I disconnect the DV cam, the Audio can be routed to my audio interface as per my Audio/Midi setup.
    In FCP I don't have this problem.
    So now, when using STP, I disconnect the DV Cam and get my Video via an RGB connection to the TV and the audio can be routed as I want.
    Not really elegant (and not really Apple-like not to have full Audio/Midi setup compatibility) but then again, when working in STP, it's the sound that matters and not the picture.

  • No audio when using headphones.

    Has anyone had issues when using headphones with the android maxx?

    On every devices iPod etc. Usually it's the head phones and not the device it self. Try swapping them out. Wow after participating in Apple support forums for years. I have to feel bad for how bad Verizon is trashed! They, Verizon are a great carrier and the post I read are ridiculous! Verizon likely replaces more devices, simply because people don't understand the hardware or software.

Maybe you are looking for

  • Obiee Report is very slow

    Hi, The report is looking very slow ,where should i tune it? Thanks-Bhaskar

  • I want to remove the audio I placed in the intro media page.  How do I do that?

    I want to remove the audio I placed in the intro media page.  How do I do that?

  • Anywhere access domain users and rights

    Hello, I am working with anywhere access on server 2012 R2, and I am wondering if it has the ability to use the existing domain user rights to existing file share's and folders instead of using its own system. For example I added a new share and poin

  • Query for vendor rating

    Dear All I want a query for Vendor rating, which is based on PO Date  PO Quantity GROP Date GRPO Quantity (i.e comparision on that and we can find out this vendor is good for me.) Pls Provide me solution.

  • What good is music sharing?

    Am I missing something? I recently purchased a Buffalo Terastation and moved all the music that my wife and I have. The Terastation shows up under SHARED, but all you can do is listen to the music. There are over 3500 songs in shared area, and there