STVN2.1 SP1 - Succession Planning Error

Hello,
We're running following environment.
Windows Server 2003 Std
STVN 2.1 SP1 with Japanese Language pack
  OrgChart
  Succession Planning
When I logon to SuccessionPlanning in Japanese and search something like Employee, Position and so on, I got following error on Log file in Nsaki_dir\SuccessionPlanning\SuccessionPlanning\Log.
2010/07/02 20:01:     ERROR: DynamicDll : Load & Invoke : Source : Message {Exception has been thrown by the target of an invocation}
2010/07/02 20:01:     ERROR: DllProcessor : getDataSet : Not able to load DLL or CLASS
But When I logon to SuccessionPlanning in English and search in like wise, the error did not occur.
Im not sure what's wrong...
Could you please tell me how to solve this error.
Thank you.
Naoki

Hello, Luke
Thank you for your suggestion.
Although I tried your suggestion by following sequence, I could NOT solve our problem. (The same error occurred)
*1.
Stop Nakisa system (Stop IIS service)
*2.
Modify my downloadSchema.xml on Nakisa_rootdir\SuccessionPlanning\SuccessionPlanning\XML
I replaced all 'encoding="ASCII"' and 'encoding="UTF8"' to 'encoding="Unicode".
Although there are some 'encoding=""' entries, I kept thoes entries unchanged.
*3.
Start Nakisa system (Start IIS service)
*4.
Check whether my error occur.
Do you have any other idea ?
If my procedure is wrong, could you tell me the correct procedure.
Thank you for your support.
Naoki

Similar Messages

  • Business Partner error in Nakisa 3.0 Succession Planning

    Quick question for the experts out there...
    ECC 6.0, EHP 4, Nakisa 3.0...
    In the Succession Planning module, when we click on all employees we see several pages of blank employees. When we click on one, we get an error message like this:
    An error occurred: Object CP50003101 attribute CENTRAL_DATA | Error reading the data for the business partner
    We've run HRALXSYNC - and otherwise we get good data about org units, positions, jobs, etc. But on employees we have this trouble.
    Any ideas or suggestions?
    Thanks much.
    David Watts

    Hi David,
    When running HRALXSYNC did you repair objects that had missing data? If not, this could be the cause of your problem.
    Regarding SAP notes, you should do a search on Service Marketplace under component PA-TM to see if you can find something that fixes the issue (should repair not fix the problem). However, the only SAP note I could find that may relate to this error was 1386433 (Undesirable PA framework initialization).
    Best regards,
    Luke

  • Upgrading SQL 2012 sp1 to sp2 error - Overlapped I/O operation is in progress.

    Hi Guys,
    Having an issue patching two of my SQL servers which are currently in an AlwaysOn, we use SCOM 2012 R2 to monitor it and it's installed on Server 2012, this is the current SQL version:
    Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64) 
    Dec 28 2012 20:23:12 
    Copyright (c) Microsoft Corporation
    Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
    I get the error when trying to install any SQL updates, I have tried the following:
    KB2977326
    KB2958429
    The installer gets to the end with error code: 997 when looking at the logs we get this:
    Action required:
    Use the following information to resolve the error, and then try the setup process again.
    Feature failure reason:
    An error occurred for a dependency of the feature causing the setup process for the feature to fail.
    Error details:
    § Error installing SQL Server Setup Support Files
    Overlapped I/O operation is in progress.
    Error code: 997
    Log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140826_104653\MSSQLSERVER\SqlSupport_Cpu64_1.log
    Visit http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=SqlSupport.msi%40ProcessComponents%40997 to get help on troubleshooting.

    C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140826_104653\MSSQLSERVER\SqlSupport_Cpu64_1.log 
    The end of that log:
    Property(S): MsiLogFileLocation = C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140826_104653\MSSQLSERVER\SqlSupport_Cpu64_1.log
    Property(S): PackageCode = {5756C162-DB51-41EE-AE83-C4DAEE74CC31}
    Property(S): ProductState = -1
    Property(S): PackagecodeChanging = 1
    Property(S): ADDLOCAL = SupportFiles
    Property(S): UPGRADE = SupportFiles
    Property(S): VSINSTALLDIR = C:\Program Files (x86)\Microsoft Visual Studio 10.0
    Property(S): REBOOT = ReallySuppress
    Property(S): EXTERNALMSICONTROL = 1
    Property(S): CURRENTDIRECTORY = y:\78f5c042a94a1c9d28
    Property(S): CLIENTUILEVEL = 3
    Property(S): MSICLIENTUSESEXTERNALUI = 1
    Property(S): CLIENTPROCESSID = 1876
    Property(S): VersionDatabase = 405
    Property(S): VersionMsi = 5.00
    Property(S): VersionNT64 = 602
    Property(S): WindowsBuild = 9200
    Property(S): ServicePackLevel = 0
    Property(S): ServicePackLevelMinor = 0
    Property(S): MsiNTProductType = 3
    Property(S): WindowsVolume = C:\
    Property(S): System64Folder = C:\Windows\system32\
    Property(S): SystemFolder = C:\Windows\SysWOW64\
    Property(S): RemoteAdminTS = 1
    Property(S): TempFolder = C:\Users\TEMP\AppData\Local\Temp\
    Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
    Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
    Property(S): AppDataFolder = C:\Users\TEMP\AppData\Roaming\
    Property(S): FavoritesFolder = C:\Users\TEMP\Favorites\
    Property(S): NetHoodFolder = C:\Users\TEMP\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
    Property(S): PersonalFolder = \\server\docs\user\My Documents\
    Property(S): PrintHoodFolder = C:\Users\TEMP\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
    Property(S): RecentFolder = C:\Users\TEMP\AppData\Roaming\Microsoft\Windows\Recent\
    Property(S): SendToFolder = C:\Users\TEMP\AppData\Roaming\Microsoft\Windows\SendTo\
    Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
    Property(S): CommonAppDataFolder = C:\ProgramData\
    Property(S): LocalAppDataFolder = C:\Users\TEMP\AppData\Local\
    Property(S): MyPicturesFolder = \\server\docs\user\My Documents\My Pictures\
    Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
    Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
    Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
    Property(S): DesktopFolder = C:\Users\Public\Desktop\
    Property(S): FontsFolder = C:\Windows\Fonts\
    Property(S): GPTSupport = 1
    Property(S): OLEAdvtSupport = 1
    Property(S): ShellAdvtSupport = 1
    Property(S): MsiAMD64 = 6
    Property(S): Msix64 = 6
    Property(S): Intel = 6
    Property(S): PhysicalMemory = 7680
    Property(S): VirtualMemory = 22117
    Property(S): AdminUser = 1
    Property(S): MsiTrueAdminUser = 1
    Property(S): LogonUser = user
    Property(S): UserSID = S-1-5-21-529874490-2830903538-1517016768-1630
    Property(S): UserLanguageID = 2057
    Property(S): ComputerName = sql02
    Property(S): SystemLanguageID = 1033
    Property(S): ScreenX = 1024
    Property(S): ScreenY = 768
    Property(S): CaptionHeight = 23
    Property(S): BorderTop = 1
    Property(S): BorderSide = 1
    Property(S): TextHeight = 16
    Property(S): TextInternalLeading = 3
    Property(S): ColorBits = 32
    Property(S): TTCSupport = 1
    Property(S): Time = 10:52:12
    Property(S): Date = 8/26/2014
    Property(S): MsiNetAssemblySupport = 4.0.30319.17929
    Property(S): MsiWin32AssemblySupport = 6.2.9200.16384
    Property(S): RedirectedDllSupport = 2
    Property(S): MsiRunningElevated = 1
    Property(S): USERNAME = 
    Property(S): COMPANYNAME = 
    Property(S): DATABASE = C:\Windows\Installer\3613360.msi
    Property(S): OriginalDatabase = C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Update Cache\KB2958429\ServicePack\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
    Property(S): UILevel = 2
    Property(S): Preselected = 1
    Property(S): ACTION = INSTALL
    Property(S): MIGRATE = {8CB0713F-CFE0-445D-BCB2-538465860E1A}
    Property(S): ROOTDRIVE = Z:\
    Property(S): CostingComplete = 1
    Property(S): OutOfDiskSpace = 0
    Property(S): OutOfNoRbDiskSpace = 0
    Property(S): PrimaryVolumeSpaceAvailable = 0
    Property(S): PrimaryVolumeSpaceRequired = 0
    Property(S): PrimaryVolumeSpaceRemaining = 0
    Property(S): DOTNETCOREPATH = 1
    Property(S): IsDotNet40Installed = 1
    Property(S): SOURCEDIR = C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Update Cache\KB2958429\ServicePack\1033_ENU_LP\x64\setup\sqlsupport_msi\
    Property(S): SourcedirProduct = {977887EC-1C9B-47FA-8489-88E5E7F43D5E}
    MSI (s) (94:B0) [10:52:12:328]: Windows Installer installed the product. Product Name: Microsoft SQL Server 2012 Setup (English). Product Version: 11.2.5058.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status:
    1603.
    MSI (s) (94:B0) [10:52:12:328]: Deferring clean up of packages/files, if any exist
    MSI (s) (94:B0) [10:52:12:328]: MainEngineThread is returning 1603
    MSI (s) (94:B0) [10:52:12:328]: MainEngineThread is returning 1603
    MSI (s) (94:FC) [10:52:12:328]: RESTART MANAGER: Session closed.
    MSI (s) (94:FC) [10:52:12:328]: No System Restore sequence number for this installation.
    === Logging stopped: 26/08/2014  10:52:12 ===
    MSI (s) (94:FC) [10:52:12:344]: User policy value 'DisableRollback' is 0
    MSI (s) (94:FC) [10:52:12:344]: Machine policy value 'DisableRollback' is 0
    MSI (s) (94:FC) [10:52:12:344]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (94:FC) [10:52:12:344]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 
    MSI (s) (94:FC) [10:52:12:344]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2 
    MSI (s) (94:FC) [10:52:12:344]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (94:FC) [10:52:12:344]: Destroying RemoteAPI object.
    MSI (s) (94:60) [10:52:12:344]: Custom Action Manager thread ending.
    MSI (c) (54:A4) [10:52:12:344]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (54:A4) [10:52:12:344]: MainEngineThread is returning 1603
    === Verbose logging stopped: 26/08/2014  10:52:12 ===

  • Succession Planning - German text displayed

    Hi,
    We are experiencing a  problem where a German text appears in Career Type column for a position that is displayed on Nakisa screen. The text in the Postion Attribute though is in English.
    This happens when slecting Positions ==> All Positions  ==> then search for position using position title or position ID.  Position ID, Title, Career Type, Career Level, etc columns are then displayed. The Career type text for a position where Career Type and Level  values are captured are displayed in German. Can you advise how to fix this.
    Succession Planning 2.0; Nakisa 2.1; SAP ECC 6.0, Service Pack 6.
    egards,
    Ike

    Hi Ike,
    Ah ha! Now I know the problem! I have correction instructions from SAP that I know are fixed in a later service package for SAP, but I haven't seen a SAP note released with the fix. This is from the OSS message:
    there is an error in the Enterprise Search modelling which has been
    corrected by support packages in the meantime.
    In the technical template SUBTYP the field SUTXT in the node
    T777U is not marked as text field. So the search does not know
    that this field contains a language dependent text which has only
    to be provided in the logon language.
    The modeling in SAP-Standard has been corrected in the meantime
    by support packages. You can correct the error in advance by
    changing the technical template subtyp as indicated in the attached
    picture: You only have to check the field "contains text".
    For this you probably need to create your own software package and then include EA-HRGXX because some nodes in the standard software component cannot be changed.
    Best regards,
    Luke

  • Issues in career and succession planning in talent mangement

    Dear Experts
    We are configuring career and succession planning on EHP5, but observing following issues like I'm getting errors when running the calibration grid in Talent Assessment.
    No entry for BAdI field RISK in table T77TMCAESFIELD
    No entry for BAdI field CHANGE_NEED in table  T77TMCAESFIELD
    No entry for BAdI field RISK in table T77TMCAESFIELD
    No entry for BAdI field IMPACT_LOSS in table T77TMCAESFIELD
    Now as per the SCN inputs, while trying to enter these BADI fields in the above table by creating some dummy VB objects in existing appraisal template, its throwing me following dump, not sure the issue. Can someone please help me urgently in this regard.
    Also in MSS, i am not finding any separate tab for career and succession planning. Please provide guidance where to find those also.
    Please help
    Regards
    Tandrima

    Please see this document:
    Calibration Grid error "No entry for BAdI field xxx in table T77TMCAESFIELD"

  • Remove Actions for Org Unit & Positiin in Succession Planning.

    Hi,
    We are in process of implementing Nakisa 3.0 SP1.
    In succession planning, we want to remove few actions for org units & position. I tried to look for the configuration of the same in admin console in detailed configuration for my positions & my org units, but could not find it. Please help.
    Thanks
    Prashant

    Hi Prashant,
    Do you mean the items in the Actions drop-down menu on the OrgUnit/Positions details panels? This cannot be done in the AdminConsole. You need to go to the <build>\AppResource\linkconfiguration folder and copy the files you want to change to <build>\.detla\AppResource\linkconfiguration folder and then change them.
    I believe the files you want are SAPOrgUnitDetailsConfiguration.xml and SAPPositionDetailsConfiguration.xml. Just delete or comment out the lines for the actions you want to remove.
    Best regards,
    Luke

  • Succession planning the Evaluation path

    What evaluation path is used for Succession planning to determine the structure, IN OC we know it is standard delivered
    MSS_OCI_MIN

    Hi Siddharth,
    STVN SuccessionPlanning 3.0 SP2 uses the HR-OCI view TMC_O_S_CP_ORG. The parent view is TMC_O_S_CP_SUPO. For 3.0 (and I believe SP1) it uses TMC_O_SUCC_T.
    Best regards,
    Luke

  • Succession Planning Manger My Reports

    Hi,
    I am logging into Sucession Planning Manager for the first time and the "My Reports" view does not show witht he error message stating that it could not find my root org unit.
    Is it checking that my user ID in the backend SAP system is a chief?  Or should it use the root org unit that I have configured in the admin console for Succession Planning Manager.  The root did work for our Org Chart solution.
    thanks.
    JB

    Hi Jamie,
    The Manager application looks for your reports based on US > P > S > O where the S to O is relationship 012 (chief). Then it looks for all positions/employees that are assigned to that orgunit.
    So, in principle your user ID needs to be linked to an employee in a chief position. No root ID should be added to this orgchart in the AdminConsole.
    I hope that helps!
    Luke

  • What is the different between old and new succession planning?

    Hi
    I have worked a lot on succession planning in 4.6c. In ECC 6.0, the succession planning has shifted to e-recruitment section.
    1. What is the difference between succession planning in 4.6C and ECC 6.0
    2. Can I still use the old succession planning in ECC 6.0
    3. Is there a requirement to transfer data from old succession planning to new succession planning if we move to ECC 6.0?
    Thanks

    http://java.sun.com/overview.html
    I found that link in five seconds.

  • Can I show a webform success or error message on a PageID redircted page?

    I have the web app edit form redirecting to the members main area.
    Is it possible to add a success or error feedback box in this area? Does BC pass any module data that can accessed?
    Thanks in advance.
    * I have feeling it is something to do with the AJAX code that is floating about. However I must admit I have no idea how to parse any formResponse.FormProcessV2Response.success results into actual html. I don't know if this even applies to a web app form, or just contact forms.

    To deauthorize all computers associated with your account
    If you find you have reached 5 authorizations, you can reset your authorization count by clicking Deauthorize All in the Account Information screen.
    Click iTunes Store in the menu on the left side of iTunes.
    If you're not signed in to the store, click the Account button, then enter your account name and password.
    Click the Account button again (your ID appears on the button), enter your password, and then click View Account.
    In the Account Information window, click Deauthorize All.

  • ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1

    Hi,
    i have the following message when i tried to install LR 5.6
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example, ERROR: DW006 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe Photoshop Lightroom 5.pkg_5.6 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
    how can i solve this issue?
    I am running on Mac with OSX 10.9.4
    thanks in advance
    Olivier

    olebreth wrote:
    how can i solve this issue?
    A search of the site would probably be a good start:
    https://forums.adobe.com/search.jspa?q=dw006

  • ITune - Windows 8.1 Upgrade error : Installation success or error status: 1603

    Hello,
    When I try a upgrade itunes automaticaly ( IE, open iTunes and iTunes tells me there and update ), it fails to update.
    When I manually download the latest copy of itunes and double click to install it, it failes with :-
    iTunes installer completed
    The installer encountered errors before iTunes could be configured
    Errors occured during installations. your system has not been modified
    Please run the installer again. finish to exit
    When I look at the event loggs I can see :-
    Windows Installer installed the product. Product Name: Apple Mobile Device Support. Product Version: 7.1.1.3. Product Language: 1033. Manufacturer: Apple Inc.. Installation success or error status: 1603.
    Windows Installer reconfigured the product. Product Name: Bonjour. Product Version: 3.0.0.10. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
    Windows Installer reconfigured the product. Product Name: Apple Application Support. Product Version: 3.0.1. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
    Please can someone help me fix this ? and tell me what I need to do to stop it happening inthe furture ?
    Many Thanks

    Hello there, G-Oker.
    The following Knowledge Base article offers up some great recommendations for the very error message you are receiving:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Particularly:
    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Photoshop CS6 could not update successfully.  Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7  Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7  Please help me figure out how to call customer service. 

    Photoshop CS6 could not update successfully.  Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7  Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7  Please help me figure out how to call customer service.  I would prefer to talk to someone directly.

    Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
    Regards,
    Ashutosh

  • ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1

    Hi All, anyone with this problem with Acrobat Pro XI, IM USING MAC, also Yosemite if that helps.
    Also Adobe CC, BASICALLY IT just quit and i had to uninstall, re install, and I get this
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1
    Anyone with same issues...

    Same problem. Creative Cloud subscriber running Mac 10.10.2 on iMac (Retina 5K, 27-inch, Late 2014). All apps work fine EXCEPT for Adobe Acrobat XI. I have tried 100 times and 100 solutions. NOTHING works.

  • Mail on success or error in message processing

    Hi experts
    I need to configure a scenario
    1. Receive idoc from an SAP system
    2. Convert the Idoc into File and Place it in the NFS File directory.
    3. On success of the message, I need to mail to SAP Owner regarding the success of the message.
    4. On error as well , i need the error details to the SAP Owner.
    I had configued all the basic steps in IR. I had struck with the BPM part.
    Please suggest with the steps in the BPM.
    Thnz

    hi Mohamed,
    For sending the mail on success or error in message processing you need to go to the runtime workbench and configure the scenario for mail alerts.
    You need to create the alert rules for the success scenario and the failure scenario.
    While creating the rules you can specify the message id's to which the mail should be sent.
    Please refer to the below link for more clarification.
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    Kindly search SDN also as there are several threads in the forum answering the same question.
    Regards,
    Alpa.

Maybe you are looking for

  • Adobe Premiere Elements 10 - missing and relinking files

    I have adobe premiere elements 10 and I am hoping someone can please help me with an issue I am having with unlinked files. The problem:  somehow the files in adobe premiere elements organizer have lost the link w/ the originals.  Whether I manually

  • Need to reload firefox as my default brower. How do I do this?

    Got a nasty bug and among other things it ate up my browser. Was using Firefox. Can I just download a new version?

  • How Can a Blog Be Featured?

    I am the Cloud E&C communication manager and would like our blog featured on PartnerEdge nteractive, "Cloud and Clear - Ramping Up Sales to SMEs" as Featured Content.  The blog is currently #1 at the Top Liked Content and has received 153 page views,

  • Duplicity: include and exclude files

    I think I'm missing something about duplicity's include/exclude mechanism. 1) This might be obvious but still... Where is the difference whether I use --exclude-filelist or --include-filelist? A dry-run showed the exact same size for my backup. 2) Us

  • Unable to edit/display Solution Monitoring after selection of Solution

    Hi, Solution Monitoring cannot be displayed/edited after selecting the Configure System monitoring setup, we are on Solution Manager EHP1 SPS 22 (1). Transaction SOLMAN_WORKCENTER (2). Workcenter System Monitoring (3).  Select ABAP&JAVA Systems (4).