Style Library File?

Is it possible to serve out a paragraph and charater style sheet for indesign that is independent of a specific document?
I'm standardizing many styles across multiple documents and was wondering if there was a way I could edit a master style sheet that could be linked to all my indesign files?
If not is there a plugin in existence that would give you this capability?

Beaten again! Anyway
You could put all files into the Book panel and make a "Book", and then synchronize all files styles to one master file in th Book Panel.
I've done this for campaigns where all collateral has identical styles, but each file was separate document.
But as far as I know, you can't save out styles like color swatches to a file.
You can Load Paragraph and Character Styles from the respective styles menus and that will bring in the styles from your master document also. Then delete the old style and a pop up menu asks for what style to replace it with. A little tedious but workable.

Similar Messages

Style library files give Path Not Found in Process Monitor (sysinternals)

Hello,
i have a question, i am using Process Monitor to diagnose SharePoint performance issues.
I am getting a lot of the following types of messages
11:27:54.3064738 w3wp.exe
3160 CreateFile
C:\INETPUB\WWWROOT\WSS\VIRTUALDIRECTORIES\{site}443\SITES\{SC}\STYLE LIBRARY\BRANDING\JS\BOOTSTRAP.MIN.JS
PATH NOT FOUND Desired Access: Generic Read, Dis, Options: Sequential Access, No Buffering, Attributes: RE, ShareMode: Read, Write, Delete, AllocationSize: n/a, Impersonating: NT AUTHORITY\IUSR
This only occurs with files stored in SharePoint (Style library/document libraries), i have seen this behavior on multiple servers so it appears to be working by design, does anyone have an explanation as to why this happens? is there also anyway to stop
this happening?
my concern is that this happens on every page load accumulating to a lot of wasted disk reads.
Thanks for your time!
Ben

Hi,
11:27:54.3064738 w3wp.exe
3160 CreateFile
C:\INETPUB\WWWROOT\WSS\VIRTUALDIRECTORIES\{site}443\SITES\{SC}\STYLE LIBRARY\BRANDING\JS\BOOTSTRAP.MIN.JS
PATH NOT FOUND Desired Access: Generic Read, Dis, Options: Sequential Access, No Buffering, Attributes: RE, ShareMode: Read, Write, Delete, AllocationSize: n/a, Impersonating: NT AUTHORITY\IUSR
This bootstrap is usually for the CSS/ SharePoint styling. It may have some code to access this path. While I checked on my environment, it seems I am not seeing this actual path, and from my registry editor as well.
Please have a check if it should have the same path at your environment. If not, I do believe some of the code are directing to the path, and since the path is not available, then the issue may appear.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

How to Include JS file already available in SharePoint Site(Style Library) in Command action

I have included JS file in command Action Using below command
<CommandUIHandlers>
<CommandUIHandler
Command="EnableCustomGroup"
CommandAction="javascript:return true;" />
<CommandUIHandler
Command="CustomGroupHelloWorld"
CommandAction="javascript:openPopup();" />
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
<CustomAction Id="Ribbon.Library.Actions.Scripts"
Location ="ScriptLink"
ScriptSrc="/_layouts/15/images/Scripts/Popup.js" />
It was working fine now I am embeding my project to Development Project in which we have divided the Modules in to two different projects One project with all Branding work including all CSS and JS files (including the above Popup.JS file) which once deployed
and the js file is residing in Style Library.
The Second project has the Command Action to call the JS file which is already residing in Site (Style Library) I am unable to refer that file path I tried using "/Style Library...... Popup.js" and also the full URL "http://site collection/style
Library/... Popup.js" just to make sure if it is working or not. But it is throwing error saying file is not found. Can anyone help me how to refer the file what source URL should i give. Thanks in Advance
Thanks and Regards,
Raj Kamal Singh Rathore

Hi,
According to your description, my understanding is that you want to reference the custom JavaScript file which stored in the style library in custom action.
I suggest you can reference the js file using the relative path of Style library like below:
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction
Title="test"
ScriptSrc="~SiteCollection/Style Library/jquery-1.11.2.min.js"
Location="ScriptLink"
Sequence="100"
>
</CustomAction>
More information:
Referencing JS files using CustomAction element
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Image file not visible in style library where it is situated but still visible in site

Hi all,
I'm a bit stumped by this one - there are a set of images that are part of my masterpage in my site, and they are "in" (according to the link/url) the "/style library\branding2010/images/..." folder, however when you GO to this folder,
these images are nowhere to be found... how is this possible?
Has this item been deployed incorrectly?
What is the correct way to (a) fix, (b) do this in future?
There is a "branding2010.wsp" file ON the server, there is also the "*.master page that refers to these "phantom" images appear fine even in SharePoint Designer, and while you CAN see them in the "Browse" for picture window
IN SharePoint Designer, you can't add edit or delete these things...
I don't know much about branding (or sharepoint really) but I'm "in charge" - I'm site collection admin, but I can't seem to "see it" using Sharepoint designer, Sharepoint "proper", or "View/Manage All Site Content".
Any help or guidance would be great!
UPDATE: Hmmm... in "All Files" (Sharepoint Designer) you CAN get to and manage these files... is this the recommended workflow?

Hi,
As you said that you can view the image files inside All Files in SharePoint Designer, so what is the image files’ location? Are they still inside the style library?
I suppose that the images may not be stored in the Style Library.
Please right click the file in SharePoint Designer and select Preview in Browser to check the URL of the images.
Per my knowledge, if the images are stored in the style library and you have permission to view or edit
the files, you can view or edit the files in the browser.
And you can also choose to edit the files in SharePoint Designer, both the two methods are supported.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

TryGetList("Style Library") is missing in different languages

hi,
i working a englisch Sharepoint and the "Style Library" to store some css js...
i often use something linke this and i works fine.
using (var spSite = new SPSite(SPContext.Current.Web.Url))
using (SPWeb spWeb = spSite.OpenWeb())
// Try load 'Style Library' List
SPList styleLib = spWeb.Lists.TryGetList("Style Library");
// If List exsit
if (styleLib != null)
-- do some... --
But now i have a german and france Sharepoint and it doesnt work anymore because
the Style Library has got an other name in other languages!
What would be a good way to handel this problem?
cheers
Matthias

you need to perform to create multilingual web part, and use resources file (.resx)
Alternatively you can use list GUID instead list name:
1. use below referece to get list GUID:
http://nickgrattan.wordpress.com/2008/04/29/finding-the-id-guid-for-a-sharepoint-list/
2. read list with GUID:
using (var spSite = new SPSite(SPContext.Current.Web.Url))
using (SPWeb spWeb = spSite.OpenWeb())
// Try load 'Style Library' List
SPList list = web.Lists[new Guid("53bd7850-49cc-4747-aded-e053659ace79")];
// If List exsit
if (styleLib != null)
-- do some... --
The following shows an example of using this method when the literal server-relative URL of the list is known at design time.
using (SPSite siteCol = new SPSite("http://server/sites/Contoso"))
using (SPWeb web = siteCol.RootWeb)
SPList list = web.GetList("/sites/Contoso/Lists/Books");
then use below line of code to read list items
SPBuiltInFieldId
string title = listItem[SPBuiltInFieldID.Title] as string;
Thanks, ShankarSingh

Library files not updating

Hi,
I have successfully used library files in my web pages for
years using a past version of Dreamweaver.
I have just started using Dreamweaver MX 2004, and whenever I
update a library file (that has already been inserted in an html
file) the html file is not updated. I started a new web site from
scratch, so am using only files that have been created by this
version of Dreamweaver.
In other words, updating the library file only updates the
library file itself, and doesn't alter the html document that has
the library file inserted into it. This pretty much means that the
library file functionality in Dreamweaver MX 2004 is useless.
Was there a bug fix for this that I needed to get?
Cheers

Try this -
Use Site Manager to export this site definition to a place
you can find.
Then REMOVE this site definition. Then IMPORT the one you
just exported.
Does it work now?
If it does not, can you confirm that your Library items are
in a folder
named "Library" and that this folder is in the root level of
the local site?
Also, are you uploading the local files after you have
changed the Library
item?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"chuckee" <[email protected]> wrote in
message
news:[email protected]...
> Hi there,
> yes I am using 7.0.1.
> I've attached the code of the page that has the Library
file inserted in
> it
> (support.htm).
> Below, I have also attached the library file -
header.lbi - (notice how it
> has
> two links that I added to it later, that did not update
the file that it
> was
> inserted in, after I saved the library file).
>
>
> SUPPORT.HTM
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
> "
http://www.w3.org/TR/html4/loose.dtd">
> <html>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> <title>SMTP2Go - Signup</title>
> <style type="text/css">
> 
> </style>
> <link href="style.css" rel="stylesheet"
type="text/css">
> <style type="text/css">
> 
> </style>
> </head>
>
> <body>
> <table width="80%" border="0" align="center">
> <tr>
> <td><div align="right">
> <div align="right">
> <p>Log In</p>
> </div>
> <table width="100%" border="0" cellspacing="2"
cellpadding="0">
> <tr>
> <td width="16%">Home</td>
> <td width="23%">How It Works </td>
> <td width="21%">Sign Up </td>
> <td width="18%">FAQ</td>
> <td width="22%">Support</td>
> </tr>
> </table>
> </div>
> <form name="support" method="post"
action="supportresponse.php">
> </p>
> <table width="65%" border="0" align="center">
> <tr>
> <td colspan="2"><p>We welcome all feedback
to do with SMTP2Go,
> and
> any questions you may have.</p>
> <p> </p></td>
> </tr>
> <tr>
> <td width="28%">Name:</td>
> <td width="72%"><input name="name" type="text"
id="name">
> </td>
> </tr>
> <tr>
> <td> Email Address: </td>
> <td><input name="email" type="text"
id="email">
> </td>
> </tr>
> <tr>
> <td valign="top"><span
class="style2">Message::</span></td>
> <td><textarea name="message" cols="45" rows="6"
> id="message"></textarea>
> <br> </td>
> </tr>
> <tr>
> <td> </td>
> <td><input type="submit" name="Submit"
value="Send"></td>
> </tr>
> </table>
> <p> </p>
> </form>
> </td>
> </tr>
> </table>
> </body>
> </html>
>
>
> HEADER.LBI
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> <div align="right">
> <p>Log In</p>
> </div>
> <table width="100%" border="0" cellspacing="2"
cellpadding="0">
> <tr>
> <td width="16%">Home </td>
> <td width="23%">How It Works</td>
> <td width="21%"><a href="signup.htm">Sign
Up</a> </td>
> <td width="18%">FAQ</td>
> <td width="22%"><a
href="support.htm">Support</a></td>
> </tr>
> </table>
>

Site not Opening as it is saying Cannot make a cache safe URL for "1033/style library/lg/jquery-1.9.1.js

Please can any one help on this
When try to open site it is giving this error
Cannot make a cache safe URL for "1033/style library/lg/jquery-1.9.1.js
but same site is opening for other users

Solution 1 :Deploy your script files under Style Library of your site.
if it is not working try the below
Sometimes you will get the error as "Cannot make a cache safe URL for "1033/sp.debug.js", file not found. Please verify that the file exists under the layouts directory. " For this you can copy the sp.debug.js file and put it inside C:\Program Files\Common
Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\1033.
- Another solution is you can add Localizable = false attribute to SharePoint:ScriptLink like below:
<SharePoint:ScriptLink language="javascript" name="/foldername/JS/newjsfile.js" Localizable = false runat="server"/>
- Apart from this you can also give file path simply using script tag like below (provided file should be deployed inside StyleLibrary):
<script src="/Style%20Library/foldername/scripts/slides.min.jquery.js"type="text/javascript"> </script>
Mohamed Basith ,MCTS - MCP . Please remember to mark your question as "answered" if this solves your problem.

Getting into the .pat -pattern library file

Is there anyway to open up the .pat file (photoshop pattern library file)
When I load it in my photoshop file, of course it tiles and fills the page.
I want access to the SINGLE TILE that's saved inside the .pat file, to use it as web background pattern.
Thanks

I don’t know any such method.
But if one hovers the cursor over a Pattern’s icon in Preset Manager the pixel-dimensions of the tile are indicated; rasterizing a 100% instance of that pattern and selecting with the Marquee Tool set to Style – Fixed Size with those measurements should allow to select a patch of the correct size.

Library file not the same when inserted.

Hello all.
In Dreamweaver 8.0, I have a library item. When I insert it
into a page, I thought Dreamweaver kept inserting an older version.
I open the library file from the Assets panel, make sure it is
correct, save it, hit the refresh button in the Assets panel, and
I'm still getting an older version on my page.
I've also tried recreating the site cache.
However, I'm wondering if I'm getting a different problem.
My library item is a set of navigation links, and the whole
site is a subdomain. Not so unusual in itself. But because this
file is in the folder 'library', all of the links are pointing to
the library folder instead of the (sub) root folder. So I added the
folder name to the links. Would Dreamweaver be automatically
stripping the information, thinking it's redundant?
This is my library item, a drop-down menu.

Use a server-side include instead....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> This isn't going to work in a subdomain.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Virginia Oh My" <[email protected]>
wrote in message
> news:[email protected]...
>> Hello all.
>> In Dreamweaver 8.0, I have a library item. When I
insert it into a page,
>> I
>> thought Dreamweaver kept inserting an older version.
I open the library
>> file
>> from the Assets panel, make sure it is correct, save
it, hit the refresh
>> button
>> in the Assets panel, and I'm still getting an older
version on my page.
>> I've also tried recreating the site cache.
>>
>> However, I'm wondering if I'm getting a different
problem.
>> My library item is a set of navigation links, and
the whole site is a
>> subdomain. Not so unusual in itself. But because
this file is in the
>> folder
>> 'library', all of the links are pointing to the
library folder instead of
>> the
>> (sub) root folder. So I added the folder name to the
links. Would
>> Dreamweaver
>> be automatically stripping the information, thinking
it's redundant?
>> This is my library item, a drop-down menu.
>>
>>
>>
>>
>>
>> <div style="position:absolute; width:288px;
height:23px; z-index:11;
>> left:
>> 607px; top: 238px;">
>> <div align="right">
>> <select name="name"
onchange="MM_jumpMenu('parent',this,0)">
>> <option selected="selected">Quick pick
Menu</option>
>> <option value="../subdomain/page1.htm">Page
1</option>
>> <option value="../subdomain/page2.htm">Page
2</option>
>> <input type="button" name="Button1" value="Go"
>> onclick="MM_jumpMenuGo('name','parent',0)" />
>> </div>
>> </div>
>>
>>
>> When I insert it into my page, it is all the same
except for the links,
>> which
>> are changed to this:
>>
>> <option value="../page1.htm">Page
1</option>
>>
>> This is telling the link it's in the Library folder,
which it's not.
>>
>> Thanks for your help.
>>
>> Virginia
>>
>

Problem with Batch Processing an Action using a Graphic Style Library

Hi,
I have ~100 files in which I need to change the fill and stroke of all the linework. I created Graphic Styles for all my new features. I then created an Action that sets a fill and stroke color, Select Same Fill and Stroke, then applies the new Graphic Style. This repeats for about 20 variations (ie; select all Fill=X, Stroke=Y, then apply Graphic Style A. Select all Fill=X2, Stroke=Y2 then apply Graphic Style B). It runs fine in my test file. The problem occurs when I try to run it in batch mode. I have my new Graphic Style Library set to Persistent, so that it is open for every file. But the action does not apply the new Graphic Styles. It's like it doesn't see/read the Graphic Style Library. I don't get any errors, the action completes. It just doesn't apply anything.
Does anybody know what I am doing wrong? Are you not able to use an action to apply a graphic style from an added Library? Do I need to add the graphic styles to the Graphic Styles Panel and have the action reference the Panel, not the Library?
Any help or insight is appreciated.
M

Try this:
Copy an item that has the Graphic Style to the clipboard before starting the action. Then put a paste step followed by a delete step at the start of the action.
Hope that helps.
Mike D.

HOW CAN I USE ONE OF MY "PREVIOUS ITUNES LIBRARY" FILES?!

Sorry about the caps lock. I searched for thsi question and got like 10 good results, none of which had answers. iTunes asked me to choose a pervious iTunes library before, but how do I do it now?!

you can hold shift when starting iTunes to force it to ask you to create a new or select an existing library file.

HT1391 I have accidantally created anoth iTunes library file and ripped a lot of music in it. Than I discovered that this music was not arrived in one library file. Know I would like to merge all my music in one library file but don't see which library is

Hi,
Regarding my Itunes library:
I'll try to explain my situation (sorry for my english).
I have a networkdrive where all my music is stored on. Itunes is installed on my macbook and I entered the network drive as my media file location.
I use my macbook to rip music and buy itunes music assuming it will all be placed in the media folder that I once entered.
Recently I found out that itunes had changed the location of my media folder to the local drive.
Since a time now (I can't exactly say when) I'm ripping many of my music collection to itunes.
Today i discovered the change of my media file location by itunes after I ripped some collections. When clicking the info button on some of the ripped files I see that they are not stored on my networkdrive, very normal, since the location of the media file is changed to local computer.
When I look in the finder I can find a local libray file (xml file) from 13 april and also one on my network drive but the date is from March. So this one is even older.
I suppose that the libray file is updated each time I add a song in itunes. So there must be anonther library file somewhere?
Is there a way to see which libarary file is used in itunes? I know you can start Itunes with the option key to select another library file but is it also possible to view in itunes which library file is used so I can consult the path of the library file in use?
What should i do to put all the local music to to my network drive and update the correct library to the new location of these files?
Why is there no alert when Itunes changes the location of the media files path?
Thanks

hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music' then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

I have multiple libraries on an external drive. Somehow all the iTunes library files i.e. iTunes Library.itl, xml, itdb, Media folder, etc disappeared! Only the music files remain. Now when I start iTunes w/option it can't find any of the old libraries!

Help! I 'm using an old G4 powerbook, Mac OSX 10.5.8, iTunes ver 10. I have multiple iTunes libraries on an external drive. Everything was fine for a while, then all of the iTunes library files, i.e. iTunes Library.itl, xml, itdb, artwork folder, Media folder, etc mysteriously disappeared! Only the music files remain (thank god) So now when I start iTunes w/option key to choose a library, I can't choose any of them because iTunes won't recognize them. Because all the library stuff is missing. So can I re-create the library files? (I don't care if I lose my ratings)
Or should I create a new empty library on the external drive, then manually move all the music files to the Media folder in the new library?
I tried some stupid ideas like creating a new library just to start iTunes, then going into prefs and advanced, then under iTunes Media folder location, selecting the location of the old library on the external, to see if iTunes would then find all the music which is still there, but no workee.
I'm out of ideas, and I searched the archives.
Help! anyone?
Scott

I don't know if this is me adding files to iTunes when the external wasn't connected
it is.
is it OK to just keep deleting that library on the Air?
i wouldn't - at least not until i
mount the external
point iTunes media folder location back to the external via preferences > advanced
consolidate my library via file > library > organize library
The ntfs hasn't seem to be causing any problems, but I've always wanted to know.
in order for your Mac to write to NTFS drives, it needs some help by installing e.g. the NTFS 3G driver. apparently that or something similar is installed on your Mac already. preferably, it would be formatted for Mac but then windows machines would need to have e.g. MacDrive installed to recognize the drive.

Can't back up Library file

Hi All,
Problem: I'm trying to create a backup of my Aperture Library file by simply doing a drag copy of it to an external drive. I get about 2/3 of the way done, when the copy process stops and I get an error that the process has stopped, due to a corrupt file. I get the same result copying to my internal back up, external back up and even doing a file copy on the same drive. I've now done the consistency check and rebuild the database, but there were no errors, so I'm assuming that I will get the same result as before. I'm trying the copy again any way, just to check. If this doesn't work, I see two next steps.
1. Open the contents of the Library file, try the drag copy again. With the contents exposed, I think I may be able to find the offending file and get rid of it. I know this is dangerous, to muck around in the Library like this, will this work?
2. Export my library, project by project, then rebuild (import) on to the new drive.
I guess my third option is to just trust that the Vault will work, but after my last experience, I wanted to look at all options.
Thanks.
Background: I have had a bad run with hard drives lately and just after recovering from having a Samsung 1TB die (lots of hours to restore everything), I had my new WD Caviar Black 2TB start to act funny, with corrupt file issues etc. Here's my config, Mac Pro Quad G5, Mac OS 10.5.8 and Aperture 2.1.4. My current back up plan has been simply drag copies of my data to both an internal and external drives on a regular basis. Simple, yes but it has served me well until this latest bout of hard drive problems.
My short term plan is to get two new 2TB drives to raid in my system, with my external 2TB as a clone of my drive. That should hold me over, till my sales pick up and I can spend my savings on a new Intel Mac Pro with new OS and Aperture 3.
My current problem is getting fully updated copied of everything backed up. I've had some corrupt file issues, which stops the copy process and makes me hunt for the offending file. All that's done, except my Aperture Library. Yes, I have multiple copies of my Vault file, but in the process of rebuilding the last time, I learned that the Vault doesn't keep thumbnails and previews. I got uneasy about this process, when it took forever to rebuild thumbs and previews. It didn't seem like it was working, when I realized I had a copy of my Aperture Library, so I copied it over and everything was cool.

A few thoughts. First when you do the drag of the library file is Aperture closed? Don't know for sure if it would make a difference but it's probably a good thing to do.
Second have you done a disk verify of the volume your Aperture library is on? I would suggest you run disk utility and do a disk verify on this volume just to rule out the possibility of a bad sector.
Finally I would really advise against going into the Aperture library and mucking about unless you have a definite know good backup of the library. You could select all your projects at once and then export them all in one operation as a new library directly onto the external drive. The you could just open this new library in Aperture, no need to import anything.

Syncing iPhone to new iTunes w/o iTunes library file

My MBP's hard drive died and I got it replaced, so it's good as new - everything was clean, iTunes was empty, etc. I'm filling up the computer again, and I realised that I backed up all my music (the mp3 files/iTunes media folder), but I stupidly forgot to back up the iTunes library file.
So I have my iTunes filled with songs but no play count, playlists etc. All the playlists and information, however, still exist in my iPhone 4, which I haven't synced to my new laptop yet.
I'm preeetty sure because of my ****-up with not saving the library file, there's no way, but I still have to ask: is there any way to sync the song data and playlists from the iPhone back into iTunes? It's not the end of the world if I can't, but I built up all the playcounts, playlists, mixtapes over the past few years and I'm a little sad to lose them.

" This iphone already has content on it but I want to add songs from my old computer."
You cannot do this. You can have content from one and only one computer at a time on the iphone.
Have you tried restoring the iphone?

Style Library File?

Similar Messages

Maybe you are looking for