Style Rendering - PRINT Mode

QUESTION: How does one suppress relative links with CSS in
print-style rendering mode?
BACKGROUND
The following is a quotation taken from a webpage hosted by
Communication MX (see source page below).
quote:
In the following example, the rule ( a[href^="/"]:after )
selects a link whose href attribute begins with a slash (making it
root relative).
What seems odd, or at least incomplete, about this statement
is that many document relevant links are preceded not only by a
forward slash, but also by two dots. By way of illustration
../folderName/fileName.html is very different from
/folderName/fileName.html.
Does the compiler simply ignore the two dots, or must one add
an additional rule to cover them, say a[href^="../"]:after?
As everything contained in quotations is commonly treated as
a String, it would appear that an additional rule is necessary.
Have I got it right?
A truly useful answer might provide a reference that could
explain the rule construction a[xxx]:yyy. This is completely new to
me.
SOURCE
http://www.communitymx.com/content/article.cfm?page=6&cid=9F31F
Roddy

So you say "How does one suppress relative links " Do you not
want links to
show in your print doc? Or from what I just read in the
source doc you want
to put your link [inside here] ??
Dave
"kiusau" <[email protected]> wrote in
message
news:go286v$84s$[email protected]..
>
quote:
Back to your question "How does one suppress relative links
with CSS in
> print-style rendering mode?
> Can you expand more on what you want to do? I think now
that this has
> continued to this point I'm confused?
>
> Did you miss the SOURCE link in my original post? If you
scroll all the
way
> to the bottom, you will find the following remark:
>
quote:
In the following example, the rule ( a[href^="/"]:after )
selects a
link
> whose href attribute begins with a slash (making it root
relative). When
it
> finds such a link, it overrides the previous selector
that displayed the
URL by
> using the property/value pair content:"". The empty
value in the quotation
> marks causes nothing to render after the URL at all.
Thus, root-relative
links
> within your own site won't generate content.
> Hopefully this clarifies things for you.
>
> Roddy
>
>
CODE OF CONDUCT: My entries in this forum are provided free
of
any and
> all commercial gain related to webpage production. I
will neither lure,
> conceal, nor defame in an effort to obtain commercial
gain from those whom
I
> assist. Moreover, my motivation for participation in
this forum is to
exchange
> knowledge and experience in an open environment free of
false pretension
with
> regard to commercial gain.
>
>
WARNING: Let forum participants, especially junior members,
beware of
> other forum participants that do not abide by this same
principle of good
> conduct.
>
>
>

Similar Messages

Replacement for 'Style Rendering' toolbar in CC?

I understand the style rendering toolbar was removed in CC.
Is there some replacement feature I'm not finding that will display a page as styled for print? (Besides using the browser print preview?)
If not: Will a replacement be added to CC 'Real Soon Now', as the saying goes?

This user to user forum cannot give you an answer.
To place a request to Adobe, see here http://blogs.adobe.com/dreamweaver/2009/04/making_feature_requests.html

Sap scripts print modes

What are the print modes available in the sap scripts?

Hi
Parent Topic: SAPScript
HOWTO:Sap script
Edit this entry - Discuss - Rename - Watch - History -
Major contributors: gopang, cmurphy262 | All Contributors
Your votes have been tallied! See which wiki entry took top honors and find out who is this year's Wiki Ironman. View the winners.
White Papers
Do You Need a Fax Server? A Special Guide on Fax Servers and SAP Electronic Document Delivery
Achieving Real-Time Supply Chain Integration
E-Invoicing for Business Process Efficiency with SAP(R) Systems
Jobs
SAP Consultants (Any City) - SD, MM, PP, FI/CO, CS, ABAP (Dice)
SAP ABAP LEAD (Dice)
SAP ABAP Workflow Developer -Contract (Dice)
Community Content
3 days until GO-LIVE!!! (Blogs)
RE: RE: RE: RE: RE: Lost connection when using tcode FS00 (Groups)
SAP SCRIPT
Table of contents Show TOCHide TOC
1. 1 Concepts
1.1. 1.1 Modifying SAP Forms
1.2. 1.2 Forms: Concepts
1.3. 1.3 Client and Language Versioning: Concepts
2. 2 Componentes
2.1. 2.1 Header Data
2.2. 2.2 Paragraph Formats and Attributes
2.2.1. 2.2.1 Standard Paragraph Attributes
2.2.2. 2.2.2 Font Attributes for Paragraphs
2.2.3. 2.2.3 Tabs in Paragraph Formats
2.2.4. 2.2.4 Paragraph and Heading Numbering
2.3. 2.3 Character Formats and Attributes
2.3.1. 2.3.1 Standard Attributes for Character Formats
2.3.2. 2.3.2 Font Attributes for Character Formats
2.4. 2.4 Windows
2.4.1. 2.4.1 Default Paragraph
2.5. 2.5 Pages
2.5.1. 2.5.1 Defining Follow-On Pages in Duplex Print Modes
2.5.2. 2.5.2 Testing Tray Selection and Print Mode Selection
2.6. 2.6 Page Windows
2.7. 2.7 Text Elements
2.7.1. 2.7.1 Default Text Element
2.8. 2.8 Main Window
3. 3 Técnicas
3.1. 3.1 Displaying Versions of Forms
3.2. 3.2 Including Graphics
3.2.1. 3.2.1 Using Boxes, Lines, and Shading
3.2.2. 3.2.2 Supported Printers
3.2.3. 3.2.3 Boxes, Lines, Shading: BOX, POSITION, SIZE
3.2.3.1. 3.2.3.1 BOX Command
3.2.3.2. 3.2.3.2 POSITION Command
3.2.3.3. 3.2.3.3 SIZE Command
3.2.4. 3.2.4 Pre-Setting BOX Position Arguments
3.2.5. 3.2.5 Using the Commands in Texts and Forms
3.2.6. 3.2.6 Tips and Guidelines
4. 4 Design Tools
4.1. 4.1 Form Components
4.2. 4.2 Processing in Overview
4.2.1. 4.2.1 Defining Header Data
4.2.1.1. 4.2.1.1 Completing the Header Data After Defining the Attributes
4.2.1.2. 4.2.1.2 Passing Data to an External Program
4.2.2. 4.2.2 Defining Paragraph Formats
4.2.3. 4.2.3 Defining Character Formats
4.2.4. 4.2.4 Defining Pages
4.2.5. 4.2.5 Defining Windows
4.2.6. 4.2.6 Using Text Elements in Page Windows
4.2.7. 4.2.7 Defining Page Windows
4.2.7.1. 4.2.7.1 Filling Page Windows with Text
4.2.8. 4.2.8 Using Text Elements in Page Windows
4.2.9. 4.2.9 Defining Main Windows in Page Windows
4.3. 4.3 Test-Printing a Form
5. 5 Releasing Forms
6. 6 SAPscript Control Commands
6.1. 6.1 Syntax of Control Commands
6.2. 6.2 Explicit Page Break: NEW-PAGE
6.3. 6.3 Preventing Page Breaks: PROTECT
6.4. 6.4 Next Main Window: NEW-WINDOW
6.5. 6.5 Assigning a Value to a Text Symbol: DEFINE
6.6. 6.6 Formatting Date Fields: SET DATE MASK
6.7. 6.7 Formatting Time Fields: SET TIME MASK
6.8. 6.8 Country-Dependent Formatting: SET COUNTRY
6.9. 6.9 Position of the Leading Sign: SET SIGN
6.10. 6.10 Initializing Numbered Paragraphs: RESET
6.11. 6.11 Including Other Texts: INCLUDE
6.12. 6.12 Changing the Style: STYLE
6.13. 6.13 Formatting Addresses: ADDRESS
6.13.1. 6.13.1 Parameters
6.14. 6.14 Setting a Footer Text in the Main Window: BOTTOM
6.15. 6.15 Conditional Text: IF
6.16. 6.16 Finding a Match: CASE
6.17. 6.17 Calling ABAP Subroutines: PERFORM
6.18. 6.18 Inserting Print Controls: PRINT-CONTROL
6.19. 6.19 Boxes, Lines, Shading: BOX, POSITION, SIZE
6.20. 6.20 Hexadecimal Data: HEX, ENDHEX
6.21. 6.21 Summing a Program Symbol: SUMMING
6.21.1. 6.21.1 Summing and Carrying Forward is Incorrect
7. 7 SAPscript Symbols
7.1. 7.1 Syntax of Symbols
7.2. 7.2 System Symbols
7.2.1. 7.2.1 Current Date
7.2.2. 7.2.2 Current Day Number
7.2.3. 7.2.3 Current Month Number
7.2.4. 7.2.4 Current Year Number
7.2.5. 7.2.5 Current Day Name (Long Form)
7.2.6. 7.2.6 Current Month Name (Long Form)
7.2.7. 7.2.7 Current Time
7.2.8. 7.2.8 Hours Component of Current Time
7.2.9. 7.2.9 Minutes Component of Current Time
7.2.10. 7.2.10 Seconds Component of Current Time
7.2.11. 7.2.11 Current Page Number
7.2.12. 7.2.12 Page Number of the Next Page
7.2.13. 7.2.13 Selected Device Type
7.2.14. 7.2.14 Spaces
7.2.15. 7.2.15 Underline
7.2.16. 7.2.16 Vertical Line
7.3. 7.3 Program Symbols
7.3.1. 7.3.1 SYST: System Fields in the ABAP Programming Environment
7.3.2. 7.3.2 USR03: User Address Data
7.3.3. 7.3.3 SAPSCRIPT: General SAPscript Fields
7.4. 7.4 Standard Symbols
7.5. 7.5 Text Symbols
7.6. 7.6 Formatting Options
7.6.1. 7.6.1 Offset
7.6.2. 7.6.2 Output Length
7.6.3. 7.6.3 Omitting the Leading Sign
7.6.4. 7.6.4 Leading Sign to the Left
7.6.5. 7.6.5 Leading Sign to the Right
7.6.6. 7.6.6 Omitting Leading Zeros
7.6.7. 7.6.7 Space Compression
7.6.8. 7.6.8 Number of Decimal Places
7.6.9. 7.6.9 Omitting the Separator for Thousands
7.6.10. 7.6.10 Specifying an Exponent for Floating Point Numbers
7.6.11. 7.6.11 Right-Justified Output
7.6.12. 7.6.12 Fill Characters
7.6.13. 7.6.13 Suppressing Output of Initial Values
7.6.14. 7.6.14 Ignoring Conversion Routines
7.6.15. 7.6.15 Changing the Value of a Counter
7.6.16. 7.6.16 Preceding and Subsequent Texts (Pre-Text / Post-Text)
7.7. 7.7 Country-Dependent Formatting
7.7.1. 7.7.1 Date Mask
7.7.2. 7.7.2 Time Mask
7.8. 7.8 Formatting Conventions
7.8.1. 7.8.1 Primary Formatting of System Symbols
7.8.2. 7.8.2 Primary Formatting of Standard Symbols
7.8.3. 7.8.3 Primary Formatting of Program Symbols
7.8.4. 7.8.4 Primary Formatting of Text Symbols
7.8.5. 7.8.5 End Formatting
1 Concepts Edit section
1.1 Modifying SAP Forms Edit section
If you want to modify SAP forms, set up your development environment as follows:
1. Make sure that no SAP-standard forms are stored as client-specific copies in your development client. Such forms should be held only in client 000, the SAP development and installation client. If you access an SAP-standard form from another client, then the central copy in client 000 is used.
If you need to remove SAP-standard objects from your development client, see Notes 10388 and 3355 in the SAP Online Service System (OSS). These notes explain the procedure for saving modified forms and then deleting all forms.
2. To modify SAP standard forms,
Copy the forms you need from client 000 to your development client.
Rename the forms using a name from the customer name reserve (names starting with Y or Z).
Copy the forms to one of your own Y or Z development classes.
Renaming the SAP standard object makes it possible to manage and transport your changes with the SAP workbench organizer. The organizer is not activated for SAP-standard objects that are modified in clients other than 000.
3. To put your modifications into effect, you must also modify the ABAP print program used to print documents that use this form. You should rename such print programs and store them in your own Y or Z development classes.
You can use the SAP Customizing System to replace the SAP print program with your modified print program in the affected applications
1.2 Forms: Concepts Edit section
Forms are used to control the page layout and also the text formatting in your documents. Before formatting a document for output to the screen or to a printer, you must assign a form to it. If you do not specify a form for a document, then the SYSTEM form is assigned to the document by default.
Application-specific forms are used in SAP applications to specify the page layout for such special documents as invoice or checks. These forms specify the structure of the information on the page(s) of such a document. They define, for example, the address header, item lines, the footer, and so on. There are two ways to format texts with forms:
In the standard SAPscript text processing (Tools  Word processing  Standard text), you can select a form for a document. You can then type text into the main window of the form and output the document in the format defined in the form.
For example, you can select a form for a letter. You can then type the body text of the letter in the main window. When you print the letter, the default text elements in the other windows of the form (heading, footer, and so on) are printed with the body text.
A document can be generated by a print program in one of the SAP applications. The print program uses a form to generate the document. Most correspondence and document generation in the SAP System are handled by way of print programs.
A print program selects the text elements that are to be printed in the windows of a form. It may also collect information from the user or ask the user to input text directly, as in some correspondence functions. The print program may also provide data for variables defined in the form.
Finally, the print program uses the form to format the document for display or printing.
1.3 Client and Language Versioning: Concepts Edit section
Forms and styles are client-specific. That is, a form or style other than the SAP standard in client 000 is available only in the client in which it was created.
Forms and styles are also language-specific. That is, the definitions and texts in a form or style are defined for a particular language. Forms and styles can be translated using the standard SAP translation tools.
Client 000 Defaulting: SAPscript accords forms and styles in client 000 a special status.
If a form or style that is used in a document is not available in the client in which the document is being printed, then SAPscript checks for the form or style in client 000. If it is found there, then the client 000 version is used to print the document.
SAP standard forms and styles are always held in client 000. You can take advantage of the client 000 defaulting as well by storing your Yxxx and Zxxx forms and styles there. That way, if a local version of a form or style is not present in a client, the client 000 version is used instead.
Language rules: SAPscript uses the following rules to manage versions of forms and styles in different languages:
The language in which a form or style is created is its "original language." You can translate a form or style into other languages using SAPs translation tools.
If a form or style is needed only in its original language and need not be translated, then you can indicate this in the language attributes in the header data. The form or style then does not appear in work lists in the translation tools.
In versions other than the original language version, changes to a form or style are limited only to translation of texts. No changes to definitions and attributes are permitted.
2 Componentes Edit section
2.1 Header Data Edit section
You can find header data in both form and style maintenance. In style maintenance, it is used primarily to present important information information designed to make it easier for the end user to select a style. The header data in form maintenance, on the other hand, is used for information and control purposes. For this reason, the header data of a form will be described in more detail.
Below, the header data is described as it appears in the alphanumeric Form Painter.
Like the header data of a style, the header data of a form comprises two parts: the data set by the system and the data you are expected to enter. The latter is dealt with separately.
Device-independent entries.
Description
A short explanatory description of the form (also applies to the style), designed to make selection easier for the end user.
Form class
You can assign a form to a class to help you organize and search for forms. The default set of classes is the set of program classes in your system.
Start page
Tells the print program which page format in a form to use first for printing.
Default paragraph
Paragraph set to * in standard text maintenance.
Tab stop
A grid set at specified intervals in all windows defined in the form. However, you should note that the tab stops are only valid in paragraphs where you have not defined your own tabs.
Language, Original language, Translation applic
Use these fields to record the master language and language of the current version of a form. Marking Translation applic makes the form accessible for translation from the SAP Systems translation tools (transaction SE63).
Device-dependent entries.
You can only enter values here that are supported in the R/3 printer definition. If you make other entries, this leads to errors in the check routine.
Page format
Determined from the spool administration table with transaction SPAD. Make sure there is a printer assignment there must be an additional spool format for the printer with the same page format.
Orientation
Depends on the page format selected. This can also be determined from the spool administration table. Please note that the formats landscape and portrait are not supported by all printers.
Lines per inch (LPI)
Basis for converting the unit of measurement LN in style and form maintenance. The value 6.00 is set by the system, as this value is supported by all printers.
Characters per inch (CPI)
Basis for converting the unit of measurement CH in style and form maintenance. The value 10.00 is set by the system, as this value is supported by all printers.
Font attributes
With these fields, you can set the default font for a form. The default font applies if other objects do not specify a font. SAPscript suggests a default font, which you can change.
2.2 Paragraph Formats and Attributes Edit section
In SAPscript, paragraphs are formatted using formats and their corresponding attributes. Text processing is simplified by the use of different paragraph attribute groups:
Standard
Font
Tabs
Outline
There are naming conventions for paragraph tags:
The paragraph tag can have one or two characters.
The first character in the paragraph tag must be a letter, the second a letter, number, or blank; special characters are not valid.
The paragraph format must be identified in the Description field.
2.2.1 Standard Paragraph Attributes Edit section
In the Standard attribute group, you find the general attributes that can be defined in paragraph formats:
Description
Precise explanation of your paragraph tag, so that the user can immediately identify it.
Left or right margin
Amount of space between the paragraph and the left or right border of the form window.
Indent first line
Indent of the first line of a paragraph. If the value is positive, it is indented to the right, if it is negative, it is indented to the left.
If you specify a negative value, then you must place the minus sign after the number: 1- .
Space before and space after
Space before and space after control the amount of space between paragraphs. The actual space between paragraphs results from the space after the preceding paragraph and the space before the following paragraph.
Alignment
Alignment of a paragraph.
Left-aligned
LEFT
Right-aligned RIGHT
Centered CENTER
Justified BLOCK
Line spacing
Spacing between the lines. The default value is 1 line; the LPI value (lines per inch) in the header data is used to calculate the line spacing.
No blank lines
Suppression of blank lines. You can control whether the blank lines of a paragraph should be suppressed in the printout or not:
No entry
blank lines not suppressed
X blank lines suppressed
Page protection
Cohesion of a paragraph. It is possible to determine whether or not a paragraph can be divided by a page break.
No entry
no page protection (default)
X all lines of the paragraph are on one page
Next paragraph same page
Cohesion of two adjacent paragraphs. Here you can define whether the subsequent paragraph should begin on the same page (that is, at least the first line of the subsequent paragraph must be on the same page).
No entry
subsequent paragraph is output on the same page or the next page, depending on the amount of space (default)
X subsequent paragraph begins on the same page
2.2.2 Font Attributes for Paragraphs Edit section
You can specify font attributes for paragraph formats. They control the font used in the text. You can specify these attributes both for the default font in the header and for particular paragraph formats:
Font family
Enter a font supported in the SAPscript font maintenance.
Font size
Enter the size of a character font. It is measured in 1/10 point.
Bold/Italic
Specify whether to use bold-face printing or italics.
Underlined
Mark this attribute to underline entire blocks of text.
When defining a paragraph format, use More to specify these underline attributes:
Spacing between the base line and the underline
Thickness
Intensity
Intensity is expressed in percent: 0 % is a black underline; 100 % is no underline.
If you defined default underlining in the header, then the fields for underline attributes are already displayed on the screen.
The following selection criteria apply to the font attributes bold, italics, and underlined:
Off attribute is not set
Retain inherited
On attribute is set
The combination of font family, font size, bold type attribute and italics attribute is referred to as a system font or SAP font. To use the SAPscript font maintenance, choose Tools  Word processing  Font.
2.2.3 Tabs in Paragraph Formats Edit section
You can define as many tab positions as you require for each paragraph format. The text can be aligned in different ways:
Left-aligned with LEFT
Right-aligned with RIGHT
Centered with CENTER
At the sign with SIGN
At the comma or decimal point with DECIMAL
You can control the tab feed in a paragraph with tab positions. The tab stops you define in the paragraph format replace the tab spacing you defined in the header data of the form. However, this depends on the extent to which you have defined tab stops in the paragraph format. If there are fewer tabs in the paragraph formats than in the header data, the tab stops of the header data are used for the rest of the line. The tab stops are represented as, , in the text editor.
You can use different units of measurement to define a tab position:
CH Characters
CM Centimeters
MM Millimeters
PT Points
TW Twips (1/20 point)
The unit of measurement CH is converted to an absolute unit of measurement using the CPI value (characters per inch) from the header data of the form.
2.2.4 Paragraph and Heading Numbering Edit section
The paragraph numbering and marking attributes are used to structure texts into chapters, subchapters, and sections. Numbering is carried out automatically by SAPscript.
You can create an outline with the entry options available:
Outline
Enter the name of the highest-level paragraph in an outline hierarchy here. The outline hierarchy is created by assigning this paragraph to all outline paragraphs.
Outline level
Enter the level in the outline hierarchy. The outline levels of the paragraphs are numbered upwards from 1; the highest outline level therefore has the outline number 1.
Number margin
Specify the space between numbering and window border. Note that your numbering may extend into the text area of the paragraph if the difference between the left margin and the number margin is not great enough to hold the numbering characters.
Left/right delimiter
Specify the character that precedes or follows the numbering.
Number chaining
Specify whether you want the paragraph numbering of the paragraph to be preceded by the numbering of all higher paragraphs in the hierarchy.
Example for number chaining
with   without
3.     3.
3.1     1.
3.2     2.
3.2.1     1.
Character string
Specify the numbering format. The numbering can be assigned a different font or character format to the rest of the paragraph.
Numbering type
ARABIC
Arabic numerals: 1, 2, 3.
CHAR Fixed character: letter or numeral, entered in the field
LETTER Letters: A-Z
ROMAN Roman numerals: I, II, III, IV
Depending upon the numbering type that you select, the following attributes may also apply:
Fixed character
Define the fixed character to be used for numbering. You should only make an entry in the field Fixed character if you have specified CHAR as the numbering type. Fixed characters include + - and o .
Output length
Enter the number of characters for Arabic numerals.
Upper case
Specify for letters or Roman numerals.
2.3 Character Formats and Attributes Edit section
Character formats, as opposed to paragraph attributes, allow you to format entire blocks of text within a paragraph.
Character attribute groups can be:
Standard
Font
When you define character formats, observe the following naming conventions:
The character format can have one or two characters.
The first character must be a letter, the second a letter, number, or blank; special characters are not valid.
Enter a simple explanation in the field Description. It is intended to help the user make a selection.
2.3.1 Standard Attributes for Character Formats Edit section
Marker
Links a search key to the selected character string when the end user uses this character format. Examples include glossary, hypertext, and data element links. Here, selected character strings are assigned the appropriate key.
Bar code
Bar code that is required for certain variables and is known to the printer, for example EAN8. The character string is printed as a bar code if the character string concerned is selected.
Bar code names, such as EAN8, refer to system bar codes. These are defined in the SAPscript font maintenance (Tools  Word processing  Font).
Protected
The character string is not split by a line break, but printed together on the next line.
Hidden
The character string is not printed. The text is only visible in the text editor.
Superscript/subscript
The character string is printed half a line higher or lower.
The following options are available for defining these attribute types:
Off
Attribute is not set
Retain Attribute is inherited
On Attribute is set
2.3.2 Font Attributes for Character Formats Edit section
Font attributes can be specified for character formats as well as for paragraph formats. You have the same options as for defining font attributes for paragraph formats.
2.4 Windows Edit section
Windows are defined in form maintenance. They represent areas that are positioned on pages as page windows and in which at a later time text is printed. You must define at least one window for each form. Otherwise, SAPscript cannot format the text.
You can assign window names and window types. However, note that you can define only one main window per form.
Use one of these window types:
MAIN
Main window in which continuous text is printed. This is the window used by dialog users of a print program and form. For example, the body text of a letter would be entered in MAIN.
The text in the main window can extend over several pages. If the text fills one page, output continues in the window of the next and subsequent pages, as long as MAIN has been defined for these pages.
VAR
Window with variable contents. The text can vary on each page in which the window is positioned. Variable windows are formatted for each page.
To every window you can assign text, which is printed in the corresponding window when the form is formatted. To assign text, use text elements, which are stored with the form.
To create and maintain text elements with the SAPscript Editor, choose Text elements. Should the text selected for the window exceed the window size, then the text is cut off.
CONST
Window with constant contents that is formatted only once.
Currently, CONST windows are processed in the same way as VAR windows. You should only use windows of type VAR.
2.4.1 Default Paragraph Edit section
For a particular window, you can override the default paragraph format that is set in the form header. Enter the default format that should apply in the window in the Default paragraph field in the window definition screen.
2.5 Pages Edit section
You must define at least one page for every form. And you must designate a "first" page in the form header. Otherwise text formatting is not possible. In addition, you should inform the system which page is to be used after reaching the end of the first page. If you do not specify a next page, the output of your text ends at the end of the current page.
To define a page, give it a name and specify attributes for it:
Name of the next page
Page counter mode
INC Increases the counter by 1
HOLD Counter remains unchanged
START Sets the counter to 1
You can display the contents of the page counter with the system symbol&PAGE&.
Numbering type of the page counter
ARABIC Arabic numerals
LETTER Letters
ROMAN Roman numerals
Although CHAR is displayed as an entry option for the numbering type of the page counter, internally CHAR is converted to ARABIC.
Output length for page numbering with numerals
Upper or lower case for numbering with Roman numerals or letters
Resource name
With Resource name, you specify that the paper for this page should be taken from a particular paper tray at the printer.
In Resource name, enter the print control that has been defined for switching to the paper tray you want to use. In printer types pre-defined by SAP, these print controls are generally as follows:
TRY01 Select first paper tray
TRY02 Select second paper tray (if available at the printer)
TRY03 Select third paper tray (if available at the printer)
TRYEN Print envelopes (if available at the printer)
TRYMN Switch the printer to manual paper feed (if available at the printer). The printer pauses until you feed a sheet of paper into it.
TRYME Switch the printer to manual envelope feed (if available at the printer). The printer pauses until you feed an envelope into it.
You can use all tray selection print controls except TRY03 with suitably equipped printers that are defined with the following SAP device types: HPLJSTND, HPLJ_II, HPLJIIID, HPLJ4, LX4039, and SNI20XX8.
You can use TRY01, TRY02, TRY03, and TRYMN on suitably equipped printers that are defined with these device types: KYOF1000, KYOF1200, KYOFS1500.
See the spool system (transaction SPAD) to check on how your printers are defined.
Print mode
With Print mode, you can specify single- or double-sided printing for a page. You can choose from the following values:
' ' Currently active printing mode continues unchanged.
S The page is printed in simplex mode. That is, the printer should print on only one side of the paper. If another mode was previously active, then the printer is switched to simplex mode with the start of the page.
D The page is printed on the first side of a sheet in duplex mode. If another mode was previously active, then the printer is switched to duplex mode with the start of the pageand continues in this mode.
T The page is printed on the first side of a sheet in tumble duplex mode. That is, the printer prints on both sides. The page on the second side is always inverted, so that the footer of the second page is printed opposite the header of the first page.
If another mode was previously active, then the printer is switched to tumble duplex mode with the start of the page and continues printing in this mode.
Print modes are currently supported for printers that use the PCL-5 language. These are printers that are defined with the following SAP device types: HPLJ_II, HPLJIIID, HPLJ4, LX4039, SNI20XX8.
See the spool system (transaction SPAD) to check on how your printers are defined.
The print controls for these functions are SPMSI (begin simplex printing); SPMDU (begin duplex printing); SPMTU (begin tumble duplex printing); SPMFS (print on first side of sheet in duplex or tumble duplex mode); and SPMBS (print on second side of sheet in duplex or tumble duplex mode).
2.5.1 Defining Follow-On Pages in Duplex Print Modes Edit section
You switch to duplex or tumble duplex mode with a form page for which one of these modes is specified. To continue printing in the current mode, for follow-on pages you must define another page in which the Print mode field is empty. Otherwise, the following pages after the mode switch will continue to be printed only on the front sides of new sheets of paper.
The reason: When SAPscript sends a page with Print mode D or T to the printer, it not only sets the print mode accordingly. To ensure that the first page in the new mode is correctly output, SAPscript also instructs the printer to output the page on the front side of a sheet. If SAPscript sends a sequence of D or T pages to the printer, the output is printed only on the front side of each sheet.
You define a first page named FIRST for a form to be printed in duplex mode. You therefore set the Print mode in FIRST to D.
To make the duplex printing work correctly, you must define a second page FOLLOWER in which Print mode is left empty. In the form definition, you specify FOLLOWER as the follow-on page for FIRST and for itself as well.
Your text is then printed in duplex mode. FIRST switches the printer to duplex mode and forces printing of the first page on the front side of a new sheet. FOLLOWER accepts the duplex mode and sends no further mode print controls to the printer. The printer therefore alternately prints FOLLOWER pages on the fronts and backs of sheets.
2.5.2 Testing Tray Selection and Print Mode Selection Edit section
SAP provides predefined SAPscript documents with which you can test whether tray selection and print mode selection are working properly on your printers.
For tray selection, print the SAPscript document SAPSCRIPT-TRAYTEST, ID ST, Language D or E.
For print mode selection, print the SAPscript document SAPSCRIPT-PRINTMODETEST, ID ST, Language D or E.
2.6 Page Windows Edit section
When you define page windows, the window names are linked to page names. You must specify the position and size of the window on the assigned page.
Define the position of a window by specifying the left margin and upper margin and the size of a window by specifying its width and height.
Left margin
Space between the window and left margin of the page
Upper margin Space between the window and upper margin of the page
Window width Width of the window depending on the page format selected
Window height Height of the window depending on the page format selected
Note that the width of the main window must be the same on all pages. All other window types can have different sizes and positions on different pages.
To print multiple columns, define several main windows on a page. As text entry is continuous, once the first main window has been filled, output continues in the second main window.
Rewards if helpfull
Regards
Pavan

Report Rendering (Print & PDF) trashes report that looks fine on screen

Since installing SQL Server 2012 SP2 CU3 (11.0.5556) a number of reports look fine on screen but when printed or exported to PDF the format is totally altered so that either many blank lines are inserted between lines, or lines are squashed together. It
doesn't affect all reports. Reports (both affected and not affected) use Tablix with both Row Groups and Column Groups. There is no obvious consistency between those reports that are affected.
All of our SQL Server instances are hosted on VM-Ware virtual servers.
I've raised the issue via Microsoft Connect: https://connect.microsoft.com/SQLServer/feedback/details/1063641/report-rendering-print-pdf-trashes-report-that-looks-fine-on-screen
Any thoughts or workarounds? Is this a bug?
Thanks!

Hi nsam,
We installed the sqlserver 2012 sp2 cu3 in our lab, but unfortunately the issue cannot be duplicated, so I provided the following options for your reference.
1),Please help to provide a way with detail steps to duplicate the issue.
2),If you don't know how to duplicate the issue, please try to remove the sqlserver 2012 sp2 cu3 update by the following steps to see if the issue can be fixed.
In Control Panel, open the Add or Remove Programs item.
2. Click Change or Remove Programs .
3. To see all the updates for the SQL Server 2012 installation, click to select the Show Updates check box.
4.Uninstall the cumulative hotfix package.
3,)Please visit this link to see the various support options that are available to better meet your needs:
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone

CR VS2005 ActiveX Printing Mode print the report larger

Hi,
I have a problem with CR VS2005 for ActiveX printing mode. It will print the report larger than usual so when I print it to the printer, some parts will cut off. But the report will print okay if I export it to pdf and print from the acrobat reader.
Can anybody help me how to fix this?
I'm using this in my development:
OS: WIndows XP SP2
Visual Studio 2005
CR for VS2005
and the application is web application.
Thanks before...

1) Try this with SP 1 for CR 10.2 applied:
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
2) see if there are any updates for your printer driver
3) See if you can duplicate this with a different printer driver
4) I believe CR 10.2 had "No printer" option (Design | Page Setup). Enable that.
Ludek

The order of my ical 'all day' events changes when i go into print mode?

The order of my ical 'all day' events changes when i go into print mode. What can i do to keep the order of events i so painstakingly created?

My hp deskjet 9362c will not print in black and white/error message says the printer mode is set at

can not get my hp deskjet 932c to print in black and white. error message states print mode in auto, but I can't find the print mode to correct. printer was printing in black and white or color automatically til last night, then in middle of document quit altogether. new cartridges get the same results.

Check the paper type settings. If this is set to "automatic" and the paper type is detected as photo paper then black only print is not available. (The black pigmented ink is not compatible with photo paper.) What is your operating system?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do i switch from copy mode to print mode on my office jet 4500 wireless?

Having trouble switching back to print mode on my printer? I can only switch from copy to fax to scan. How do I switch to print???

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Lightroom 3 preview not working in Print mode

last week I updated my mac to Lion and encountered a problem with lightroom 3. It wont let me preview the print in print mode now! before it did! now when i try and print, it just prints a white blank print?!
luckily i used my macbook pro, the same problem happened in the lightroom too but it printed the image rather than blank printing
any reason why i cant see the print preview any more?

Did you get an answer to this? I have the same problem. dave

I have selected Print and a image is shown. When selected in library mode the image I want is shown, different image in print mode? How do I get the image in library mode to show and print?

When I select an image in library mode the image I want it is shown. When I go to print mode a different image is shown. Why doees this happen? How do I get my required image to show and print?
Thanks, Bob

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Lightroom print mode and Color mode grayed out

Both print mode and color mode selections are grayed out not allowing me to select them. Help

I see you haven't gotten much input so far from the Mac experts...
As a Windows user without an Epson printer myself, I can't comment on why you might have color problems under the covers where the software doesn't seem to be following the chosen settings. However, perhaps I can get you thinking about how to further diagnose the problem...
The obvious thing I see is that you've chosen "Photoshop Manages Colors" in the main dialog, which implies your intent is to shut off color-management in the printer driver itself. So to me the graying out of those settings in this case seems to make sense.
Have you tried a test print using the "Printer Manages Colors" setting?
Also, to try to test whether color-management isn't being turned off in the printer (regardless of what the grayed-out settings show), do you see any improvement if you use "Photoshop Manages Colors" but choose a standard profile, such as sRGB IEC61966-2.1 for the Printer Profile setting?
-Noel

Seeded reports with landwide style not printing correctly

Have are running into a problem where seeded reports with landwide as the style is printing with a blank line between each printed line. We have tried changing the font from 8 to 7 for the print driver. But that didn't resolve our issue either.
We have tried this with both a PASTA and non-PASTA print driver with the same results.
LANDSCAPE and XML/PDF report are all printing fine.
This is being done on an upgrade from 11.5.10 to 12.1.3
Any thoughts on what else to check?

Can you reproduce the issue if you print the output filea from the OS?
Did you bounce the CM after changing the font size?
Only First Line Of Concurent Output Prints And Then Blank Lines/Pages (Doc ID 452906.1)
PASTA Printing LANDWIDE on LETTER Truncated to the Right (Doc ID 269448.1)
PASTA 3.0 Release Information (Doc ID 239196.1)
Thanks,
Hussein

How can i set print mode at run time in smartforms???

Hi expert,
In smartforms how can I set print mode at run time.
I have one screen.In this screen one check box is there.If user select that check box then print should be come double side otherwise it is coming single side.
If it is possible then plz give me answer asap.

Hi,
Set These settings
While calling smartform, paas control_parameters and output_options as mentioned below and set
user_settings = ' '.
It will send the smartform output to spool.
DATA: wa_output_options TYPE ssfcompop,
wa_ctrl TYPE ssfctrlop.
wa_output_options-tdimmed = 'X'.
wa_output_options-tddelete = 'X'.
wa_output_options-tdimmed = ' '.
wa_output_options-tddest = 'LOCL'.
wa_ctrl-no_dialog = 'X'.
CALL FUNCTION lv_fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = wa_ctrl
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = wa_output_options
user_settings = ' '
x_adrp = x_adrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Kumar(Reward if helpful).

Develop Mode to Print mode problem

I cannot find a Lightroom 4 beta thread so I will ask my questiion here. When using the Develop mode in Lightroom 4 beta and then switching to the Print mode the photo I was just working on in Develop mode does not show on the screen but the last photo I actually printed shows again. What do I not have set right so that the current picture I was working on shows in the Print mode? I did not have this problem in Lightroom 3.

At the top of this forum, see the notice "Read this before posting about LR 4!!!"

Lost CSS style rendering

Help!
I've read the FAQ regarding toggling CSS styles as I've lost/inadvertanly switched off the detail in the design pane leaving me only with the code. This was the advice:
Sometimes, though, your CSS looks completely wrong or isn't displayed at all. Usually, this happens if you have accidentally turned off the display of styles, or if you have selected an option other than Screen Media Type in the View > Style Rendering submenu or the Style Rendering toolbar. Make sure Display Styles and Screen Media Type are selected (they should have checkmarks against them like this:
However, I'm running an old version - DreamWeaver MX 2004 v 7.0.1 - and it doesn't have Style Rendering etc. under the View tag. Please tell me what I must do. (Don't say upgrade!)
Thanks
Les

in a couple of pages I cannot see any text or image items in the Design View
Use the validation tools below and fix reported errors.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.

Style Rendering - PRINT Mode

Similar Messages

Maybe you are looking for