Style Sheets

Hi All
Apart from the built in style classes, I want to be able to use additional style classes within my Portal page. Is there a way to extend the oracle portal style with custom classes? Any other way to accomplish this?
Regards
Harry

You could use an unstructured template for your page that references an external style sheet. This would allow for some customization.

Similar Messages

  • I am forced to hold shift and refresh the page on 99% of the sites I visit. How do I fix this from happening? If I don't the pages are missing style sheets and etc.

    When ever I go to sites they half load or are missing style sheets. If I view the source for the page and click on a style sheet link I get the following error:
    Content Encoding Error
    The page you are trying to view cannot be shown because it uses an invalid or unsupported form of compression.
    If I hold shift and refresh the page loads as normal.
    It's happening on 99% of the sites I visit. I have disabled my plugins and add-ons.
    I do have some add-ons or plugins that I would like to remove completely but there is no uninstall or remove option, neither in regular or safe mode.

    '''I'm NOT buying a backup Computer till, Firefox will Run on Windows 8 !'''

  • Problems with a style sheet in InDesign CS3

    Hello everyone. I was wondering if anyone had any clue as to what the holy heck is happening to me.
    I am attempting to standardize our documents and use style sheets--hey, what a concept, right? So I'm going through a recently completed document and grabbing text and using that to create paragraph style sheets and character based style sheets.
    With one paragraph style sheet, the text is set to Janson Text Lt Stnd 55 Roman. However, when you apply the style sheet to a paragraph, the first word sets to a missing font. The rest of the paragraph is OK. It's only the first word. The paragraph style sheet does not have a "+" next to it. Highlighting the individual word and reapplying the paragraph style sheet does not change this.
    I went to the character style palette, thinking that there was an override. Nope, the character style was set to "None." I clicked on "Override" to apply the paragraph style, and again, the first word is stubbornly refusing to change.
    What gives? I am stumped!
    Best,
    Chryss

    Styles based on Basic paragraph are a nightmare because every document starts with a basic paragraph style, and there's no guarantee that it will be the same from document to document. When you import styles based on Basic Paragraph from some other document, different attributes will be overridden depending on what is the same, and what is different.
    The best way to deal with this is to either import the basic paragraph stle along with everything else, or put all the docs in one book file and pick one to use as the master, then synchronize the styles.
    It sounds like your first word problem could be an applied character style, though, or less likely, a nested style.
    Peter

  • Is it possible to change the color of a layer of a Customs CSS from an External Style sheet?

    Hi,
    I have sucessfully link External .css  file to my HTML page and able to change the font size of the headlines and the paragraph.
    What I am not able to do is to ADD the color my Custom CSS from the External sheet.  I have difined the color attribute as a 'Advance'
    and gave it the same name "#bigwraper" that is has in my HTML file.
    Attached is the color outline of my 'Blank Layout' with colors?
    Thank you.
    Dreamer101.1

    Hi Murray,
    I am building a web site on which the entire content would be changed at least daily. The website would have similar design to www.Helium.com
    The page will have CCS layout boxes in which different content would  be pasted.
    To re-phrase my question:  I want to know how to change the color of a layer from an external style sheet?
    Because my home page 'Sidebar' and colors would be the same for all page, only the content of different pages would be different.  If I want to change a color of my web side pages, I need to learn how to do it in one spot through an External Style Sheet.
    I am amble to link my external style sheet and to change H1 tag and to give it different colors. But I was not sucess with change the color of a layer on which my content sits around.
    I took out the color from my HTML page and gave the same name to the layer in my External Style Sheet with the same color.
    Hope my question and the reason I was able to clarify.
    cheers,
    Dreamer101.1

  • Generate report from database using .xsl style sheet

    I am trying to view test result histories for specific uut serial numbers.
    We are logging all test data to the default access database template that was provided with Teststand.
    Is there a method of generating reports from the database that match the format of those generated at runtime?
    I was surprised to find that the default access database did not contain any gui or pre-made reports matching the xsl style sheets chosen in the report options dialog.
    My database skills are weak, I am able to browse the raw data and I see the relationships between some of the tables, but the prospect of recreating one of the xml report formats in access seems daunting. Am I missing something? what is the best way to print a uut report from test data stored in access?

    Hello msears,
    Thank you for posting on the NI Discussion Forums.  Unfortunately there are no tools available in TestStand for directly converting an Access database to a formatted .xsl report.  It is possible to have a step in a sequence that reads the information from the database, and create the .xsl report as if it had been generated at sequence run-time, by writing those values directly to Locals.ResultList.  Admittedly, this would require some knowledge of Microsoft Access, and the ability to write a program that will extract information from the database, in order to include it as a step in the sequence.
    Is there anything stopping you from creating a formatted .xsl report when the sequence is run (instead of trying to create it from previous data stored in an Access database)?
    Chris_G
    Sr Test Engineer
    Medtronic, Inc.

  • XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

    XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

    Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
    ''If it displays in Firefox:''
    It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
    ''If it displays in IE or embedded in another Microsoft application:''
    In a web search I found these suggestions:
    (1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
    (2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
    Any luck?

  • Can I add the same style sheet to multiple nodes in the same scene?

    I know this sounds like a dumb question, so I'll give an explanation below.  I've done this with FXML and Scene Builder and haven't noticed any negative effects yet.  I'm mostly curious what happens internally when I add a style sheet to a node and that same style sheet has already been added via a parent node.
    The reason I ask is because I use fx:include in many of my FXML files.  For example, I'll have something like this:
    MainPane.fxml - Uses shared.css and main-pane.css.  Includes SubPane.fxml.
    SubPane.fxml - Uses shared.css and sub-pane.css.  Included in MainPane.fxml using fx:include.
    I used to add shared.css to SubPane.fxml using Scene Builder's preview option, but the way this works has been changed in Scene Builder 2.  See this thread for an explanation of the change.  I also use TestFX and I'm convinced that I should be ensuring shared.css is applied to SubPane.fxml before running GUI tests.
    The easiest way to accomplish what I want is to add shared.css to the root node of both MainPane.fxml and SubPane.fxml.  However, I don't know if that's something I'm allowed to do.  Is it?

    No. http://www.adobe.com/products/creativecloud/faq.html
    Can I buy more than one membership to an individual offering of Creative Cloud? 
    No, Adobe has moved to identity-based licensing with a technology that will not support multiple same-product licenses, so you can buy only one membership per Adobe ID. If you need two Creative Cloud memberships, you will need to purchase each with a unique Adobe ID. You can also purchase a Creative Cloud for teams membership, which allows you to purchase and manage multiple seats under one account.

  • Is there any way to create a style sheet in APEX?

    Hi experts,
    I am in I am in Oracle Enterprise Manager 11g 11.2.0.1.0.
    Is there any way to create a style sheet in APEX any version?
    I want to create a style sheet and use APEX report column link to it.
    Thanks.
    Cow

    Well, if that is the case, then you'll need to do some PL/SQL programming to write a package to create all of that for you, then execute the package when the 'link' column is clicked.
    After your package is written, change the attributes on your link column to be a URL instead of page in your application and call it like:
    javascript:{MypopUp2('http://your.server.name/print/owner.package_name.sub_procedure?key=#COL01#',800,600);}
    On my system, I created a new DAD and user just for this one purpose, to read an select the information in my report, generate the HTML to display the data, etc. without leaving a loophole someone could exploit to get direct data manipulation access. My report though is a form-type report of all the data from about 40 tables for that one 'master' record, with css formatting included. I'm not directly generating a css file based upon data within the database, but simply adding the css formatting into the HTML file my package generates.
    Does this help your problem?
    Bill Ferguson

  • How can I get the link not to override my style sheet formatting?

    I have an html page with text that has a style sheet applied
    to it. When I insert a link into parts of the formatted text, the
    style sheet formatting is lost in the linked text (the text for
    mylars, shapes and number shapes becomes smaller: see code below).
    How can I get the link not to override my style sheet
    formatting?
    Here is the html code I am referring to:
    <span class="bodyheader20pt">Fall into winter's biggest
    celebration with our New Year's Day <a href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=A4&sc=184&PageNumbe r=1"
    style="text-decoration:none">mylars</a>, <a href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&sc=184&PageNumbe r=1"
    style="text-decoration:none">shapes</a>, and 2-0-0-9 <a
    href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&sc=166&PageNumbe r=1"
    style="text-decoration:none">number
    shapes</a>.</span>
    I am using Dreaweaver CS3 on a Mac running OSX
    10.4.11.

    Show us this rule --> bodyheader20pt?
    Also, having this in your three anchor tags -
    style="text-decoration:none" -
    will prevent your anchors from displaying any stylesheet
    style for
    text-decoration.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "ellfwar" <[email protected]> wrote in
    message
    news:geqiph$foq$[email protected]..
    >I have an html page with text that has a style sheet
    applied to it. When I
    > insert a link into parts of the formatted text, the
    style sheet formatting
    > is
    > lost in the linked text (the text for mylars, shapes and
    number shapes
    > becomes
    > smaller: see code below).
    >
    > How can I get the link not to override my style sheet
    formatting?
    >
    > Here is the html code I am referring to:
    > <span class="bodyheader20pt">Fall into winter's
    biggest celebration with
    > our
    > New Year's Day <a
    > href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=A4&
    > sc=184&PageNumber=1"
    style="text-decoration:none">mylars</a>, <a
    > href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&
    > sc=184&PageNumber=1"
    style="text-decoration:none">shapes</a>, and 2-0-0-9
    > <a
    > href="
    http://www.usballoon.net/web/default.asp?pagename=mg_cls&mg=A9&mg2=&cl=L2&
    > sc=166&PageNumber=1"
    style="text-decoration:none">number
    > shapes</a>.</span>
    >
    > I am using Dreaweaver CS3 on a Mac running OSX 10.4.11.
    >

  • Style Sheets: Retrofitting previously-numbered lists

    Hello wonderful INDD community!
    I have learned so much since my last visit here, and I want to say Thank you! You've helped me "up my game" with nested style sheets and grep!
    Working on the same catalog project as I was discussing before, and I've run into this quandary:
    This catalog has quite a lot of numbered lists, most of which were already numbered when I got them. I'm wanting to differentiate the numbers from the titles (which I've further differentiated from the descriptions using Nested Styles), but am having trouble deciding the best way to do it.
    The reason I bring my woes here is because this group, I know, members here will help me find the BEST way to do it! Not just any ole way.
    I sort of see two ways of approaching it:
    Using GREP Styles to identify the item numbers and also to insert a second tab to allow me to right-align the numbers. The 1st part, I think I can do, the 2nd part kind of makes my head spin.
    Converting these hand-typed numbered lists to INDD auto-numbered lists. The hurdle here, to me, is how to get rid of the debris of the hand-typed numbers in some easy automated way? This concept is kind of the reverse of INDD's "Convert Bullets and Numbering to Text" feature. A "Convert Text to Numbering" command.
    Now, it's easy for me to believe that somebody here in this forum has a better idea. I just wanted to prove to you that I've done my homework. Hours of it, in fact.
    Can peoples take a look at the attached image which attempts to illustrate what I'm after?
    Thanks SO MUCH,
    Mick

    Howdy all--
    Ok with some begrudgement, I have to say that technically this works.
    It's kind of slow-going though..and it's not without anguish, which isn't an indictment of Jongware's implementation; probably more an indication of my ignorance.
    What I'm doing is:
    Highlighting a list
    Styling it to a paragraph style that uses INDD's built in auto-numbering feature
    Running Jongware's GREP pattern (thank you!) to get rid of the old hand-typed numbers
    Placing the cursor in the middle of the first entry and right-clicking and selecting "Restart Numbering."
    I know this isn't exactly what the Doctor ordered, Jongware, but I prefer this modified workflow because it kept me from needing to change the "find/change" box back and forth between two states (even if those two states were only the one format change). I was afraid that would start boggling my brain after doing it many dozens of times..
    SO-- The thing that bugs me is step #4. I don't really understand the INDD behavior when it comes to auto-numbering. In the paragraph style I created  (see screen cap), if I set it to "start at 1" with a series of items highlighted, it numbers them all "1". If I say "continue from previous number," it refers to some bit of previous numbering in the story and picks up from there. Hence step #4.
    Anybody care to shed some light on INDD's kind of odd auto-numbering tendencies (or my ignorance?) :-)
    thanks again,
    Mick

  • Safari 5.0.3 not loading CSS style sheets 1st time through

    When I go to my ecommerce site's https payment screen, the page HTML loads OK but the formatting is missing (so the screen is really messed up). If I hit the page re-load function the page re-loads with all the formatting corrected. It behaves the same with both the Mac and Widows versions of Safari 5.0.3. The problem did not occur on earlier versions of Safari (i.e., the Mac I use for testing the site worked perfectly on the now problematic page until I upgraded to the latest version of Safari).
    The problematic page works fine with all the other browsers that I have tried (IE7, IE8, Firefox, Chrome)
    My guess is that it has something to do with some @import url("css style sheet") directives that are imbedded at the beginning of the master style sheet for the page.
    This problem will stop all Safari 5.0.3 users from navigating our site so it is quite serious.
    Any help on this issues would be greatly appreciated.

    Further investigation has revealed that the following error message is being generated within Safari during the first time the that the page is loading,
    "Refused to load from document base URL. URL found within request."
    The <base> directive in the HTML, in this instance, is referring to a different URL than the one that the page is running from. The page with the problem is running on a remote server and back referencing to the home server for the <base> reference. This fails when the page first loads but seems to be accepted if a page-reload is done. It also works on all other browsers that have been tested.
    Is this related to a security setting in the browser?

  • Style sheets no longer working

    Style sheets created and used previously are no longer working (properly). What's up with that?

    Believe you called this correctly, and the first reply. Yes somehow imported text was tagged with a character style, and paragraph styles were then not applying themselves properly. When the character style was set to none; the paragraph styles suddenly worked as usual.
    Give yourself a perfect score (and end the discussion).
    Thanks.

  • FF 5 on mac is no longer displaying background images that are defined in style sheets. This has woeked correctly for years with older versions.

    The problem occurs both in safe mode with all add-ons turned off and in normal mode with add-ons active. I see the missing images error on most sites using style sheets including Mozilla.

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    * Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also http://support.apple.com/kb/HT1343#odd10

  • Style Sheet error in Transaction code ME21N

    After executing the Transaction ME21N.If we press "Help push button" the system should open help on the left side of the system. But in our case it is displaying only one line.                          
    <style type="text/css"><
    It seems to that some style sheet are missing. We have just upgraded the R/3 support pack from 39 to 48. Before support it was working fine.    
    we have the same problem with transaction ME51N.Please suggest.                                                          
    Thanks and Regard
    Amandeep Singh

    Hi
    That table stands for Customer/Vendor Tolerance
    Go SM30 and put V_T043G table and press maintain. Then Copy 0001 and change the Company code & currency - SAVE
    Hope your problem will solve
    Regards
    Tanmoy

  • How do I get back some files (such as what I believe are called style sheets after I cleanup my system by deleting what another program believes are temp files?

    I use Windows 7 and Firefox 23.
    I use either iSafe or WiseCare 365 to cleanup my system once in a while.
    In that process many "temporary" files are deleted, which is fine for really temporary files.
    What bothers me is that the next time I open Firefox, my previously open Web sites appear differently.
    I believe this is due to a loss of the style sheet files that they use.
    In the past I have fixed this problem by resetting Firefox to its basic state.
    But then I lose all the tabs that were previously open.
    How can keep those files that give the Web sites their appearance?

    Use build-in means to clear personal data in the Firefox profile folder and exclude the Firefox profile folder from those cleanup program because they usually do more harm than being useful.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Main profile folder:
    *C:\Users\&lt;user&gt;\AppData\Roaming\Mozilla\Firefox\Profiles\&lt;profile&gt;\
    Cache folder and other data:
    *C:\Users\&lt;user&gt;\AppData\LocalMozilla\Firefox\Profiles\&lt;profile&gt;\
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

  • When I try to attach my css style sheet Dreamweaver gives me an error saying that my .css file appears to be an .html file and will not attach. How do I fix this so I can attach my style sheet?

    I have built a css style sheet in Dreamweaver. When I try to attach it to my html website, it prompts me that my "css file appears to be an .html file and cannot attach". I've tried removing the /* */ as suggested by other forums, but this has not resolved the issue. I was using css style sheets with no problem 2 days ago. Now I get that error message. How do I fix this so I can attach my style sheet?

    What does the code of the CSS file look like?
    An external CSS file needs to be written in CSS only (no html tags like <html>, <body>, <head>, etc ).
    It also must have a .css file extension, if yours has a .html extension it won't work.

Maybe you are looking for