Stylized type out of indesign disapers when creating pdf
stylized type out of indesign disappears when creating pdf
You need to be more specific.
Are you viewing in Overprint Preview (you should) in InDesign.
A screenshot would help this.
Similar Messages
-
Grey Out a Field only when Creating a New Campaign
Hi ,
I Have a requirement to Grey out the Language Field when Creating a new Campaign.
The same field should be in editable mode when we go and edit an existing Campaign.
Method GET_I_LANGU.
if parent_entity->is_changeable( ) = abap_true.
rv_disabled = 'FALSE'.
else.
rv_disabled = 'TRUE'.
endif.
endmethod.
I tried changing the rv_disabled = 'TRUE'.
But it will grey out the field even when editing an existing Campaign also.
Any Suggestions.
Regards,
sijoHi,
At the Left handside there will be Runtime Repository tree u can see the Campaign in the Root Nodes , under go to the relations and u will get the CPGDescriptionRel (Description) as the relation . Get the attribute EXTERNAL_ID from the parent_entity variable in the GET_I_LANGU method.
data lv_campaign type CRM_MKTPL_CAMPAIGNID.
CALL METHOD PARENT_ENTITY->IF_BOL_BO_PROPERTY_ACCESS~GET_PROPERTY_AS_VALUE
EXPORTING
IV_ATTR_NAME = 'EXTERNAL_ID'
IMPORTING
EV_RESULT = lv_campaign.
now make use of the lv_campaign . -
How can i set Color Conversion field in Export to PDF dialog to No Color Conversion when creating PDF Export preset? i have done a bit of searching and have found where it has been recommended to set effective pdf destination profile to use no profile but it doesn't seem to be producting the expected results.
Yes, it seems that i had to make the change after creation, not while creating the preset. thank you.
tell application "Adobe InDesign CC"
set newPreset to make new PDF export preset with properties ¬
{name:"preset name", standards compliance:none, acrobat compatibility:acrobat 7}
tell newPreset to set PDF color space to unchanged color space
end tell -
Error message: Helvetica Medium outline font missing when creating PDF's
Error message: Helvetica Medium outline font missing when creating PDF's. Where can I downlaod it and why is it suddenly happening?
OS? Version of ID?
This means that either you have an extra Helvetica Medium font installed and it's interfering with ID finding the T1 version, or the T1 version is damaged. I found this really old thread that explains it fairly well: http://www.asadesigner.com/22-indesign/2d812de56777cc90.htm
The good news is that it's probably only affecting the page information marks. -
Acrobat distiller keeps on quitting when creating pdf
Hi there, my Acrobat distiller 10 in OS X Mountain Lion keeps on quitting when creating pdf. Please help.
Hello,
1. Please try updating the Acrobat to 10.1.10 and then check the issue.
2. Go to Settings -> Font Locations. You'll see a list of sources that Distiller gets its fonts from. Make sure that the paths actually exist, delete them if they don't.
3. Try with different joboptions.
Regards,
Anoop -
When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks
When creating PDFs from WORD 2010 I cannot get the TOC heading entries as hyperlinks. I used to be able to do this in WORD 2003. I tried to create a PDF from Acrobat by selecting File > Create PDF >navigate to the WORD file > select three checkboxes >
Any help with getting the TOC heading entries as hyperlinks?Try to do it from Word using the ribbon.
-
PDF Bookmarks - Change Default Width When Creating PDF File from InDesign
When creating a PDF file (from Indesign CS4) I automatically create the PDF bookmarks based on the InDesign document's Table of Contents.
But by default the width in the bookmarks is always set at "Fit Page".
Is there a way to change the default to "Fit Width" in Indesign before the PDF is created?
It's too much trouble to change every bookmark in the PDF after it's created.
Thanks for any help in advance!Thanks, Steve. I have actually previously done what "fogharty" suggests and it does work if I want to set the pages to "fit width" or a variety of other options. However, none of the options is inherit zoom which is what I, and many other from the sound of the thread, need and want. We want to respect our end users--not dictate how they must view our PDFs. Hopefully, Adobe will listen and make this option available soon.
-
Indesign crashes when placing pdf created in Xinet Fullpress.
Indesign crashes when placing a pdf from Xinet Fullpress. Xinet thinks the problem is in inDesign.
What to do?
The pdf files works fine in acrobat and apple preview.Hi Peter, here is the link to the crashreport:
http://pastebin.com/xzpp717i
If you need the a test file that crashes, please download it on the attached link below.
regard Martin
Xinet pdf crash
Hi, click on the link to download
Tue Sep 18 2012, 15:47:53 -
Images Disappear when creating PDF
When creating a PDF out of InDesign we are having issues with images diappearig when Postscript Overprint / Overprint Preview is on. When printing images also do not show up. When viewing in Reader Images do not show up. Has anyone run into this issue, we are running CS3 & CS4. Any help will be appreciated
Most likely cause is that the images are set to non-printing in some way, either inidvidually through the Atrributes Panel, or they're on a layer that is set to non-printing.
-
Exception: cx_fp_runtime_usage when creating pdf object
Hi, experts,
i found out that every time we call the method create_pdf_object to get an reference of a pdf object, there always a exception occurs, any way to get ride of it?
somehow , the pdfobj work even the exception occurs.
l_fp = cl_fp=>get_reference( ).
TRY.
l_pdfobj = l_fp->create_pdf_object( connection = 'ADS' ).
l_pdfobj->execute( ).
CATCH cx_fp_runtime_internal
cx_fp_runtime_system
cx_fp_runtime_usage INTO l_fpex.
endtry.Hi ,
I am getting this exception too!
CALL METHOD cl_gui_frontend_services=>file_open_dialog
CHANGING
file_table = lt_file_table
rc = lv_rc
USER_ACTION =
FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
READ TABLE lt_file_table
INTO lv_filename
INDEX 1.
cl_gui_frontend_services=>gui_upload(
EXPORTING
filename = lv_filename
filetype = 'BIN' "Binary
IMPORTING
filelength = lv_filelength
CHANGING
data_tab = lt_rawtab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19 ).
Get FP reference
DATA: lo_fp TYPE REF TO if_fp VALUE IS INITIAL.
lo_fp = cl_fp=>get_reference( ).
For handling exceptions
DATA: lo_fpex TYPE REF TO cx_fp_runtime VALUE IS INITIAL.
TRY.
Create PDF Object using destination 'ADS' (<-- this is how it is
defined in SM59)
DATA: lo_pdfobj TYPE REF TO if_fp_pdf_object VALUE IS INITIAL.
lo_pdfobj = lo_fp->create_pdf_object( connection = 'ADS' ).
FIELD-SYMBOLS: <ls_rawtab> LIKE LINE OF lt_rawtab.
Move to XSTRING
LOOP AT lt_rawtab ASSIGNING <ls_rawtab>.
CONCATENATE pdf_data <ls_rawtab>-data INTO pdf_data IN BYTE MODE.
ENDLOOP.
Set document
lo_pdfobj->set_document(
EXPORTING
pdffile = lv_filename
pdfdata = PDF_DATA
Tell PDF object to extract data
lo_pdfobj->set_task_extractdata(
EXPORTING
xsltdata = pdf_data
Execute the call to ADS
lo_pdfobj->execute( ).
CATCH cx_fp_runtime_system.
ENDTRY.
Any idea what could be wrong? The ADS connection, when tested with report seems to work fine!
Regards,
Poonam -
White boarders around artboard when creating pdf in CS4
Hi,
have been trying to find solution for this issue for 4 hours now and im loosing my mind:)) ... so decided to ask some help from you guys.
Problem: im trying to create pdf file with black background in Illustrator cs4 and white thin boarders keep appearing to the right and bottom of the page. I have streched the background image so that its bigger than the artboard but white lines are still there when pdf is opened?!? I guess there is extremeley easy solution for this (kind a "you forgot to tick the box from x menu") but i just cant figure out .... so all the help is most wellcome!!!
Thank you in advance!
Jimi@ Jacob --- you're half correct, in that it's a small bug, or smoothing artifact in the Preview application from Apple.
White boarders go away when you uncheck "Smooth text and line art" in Preview Preferences, under the PDF tab. Since that makes everything very pixelated, I don't recommend keeping that setting on.
Instead, consider installing Adobe Reader or using Acrobat Pro, where incidentily, the very same phenomonen can occur. In Acrobat Pro, you can also toggle "Smoothing" in the Preferences, Page Display dialog.
TIP: Preview works best with RGB PDFs, whereas if you are doing print production work, I would suggest using either Acrobat Reader, or Pro which is my preference because of the soft-proofing and print production tools. -
Acrobat 9 Quits When Create PDF from Scanner Selected
Hi. I wonder if anyone can advise please.
I have recently installed Acrobat 9 on my MacBook Pro and have plenty of RAM. However, I can "Create PDF from Scanner" just the once. After that, Acrobat quits when I select Scan or quits if I cancel the scan.
I have tried the following:
1. Troubleshoot System Errors & Freezes
2. New User account
3. Recreated Preferences
4. Booted from separate disk
5. Repaired disk permissions
6. Have no third party plug-ins installed
7. Have run Repair Acrobat
8. Changed Universal Access
9. Defragmented disk & repaired files
10. Safe Boot and reinstall Acrobat
Nothing has worked except when I clean install I can scan through Acrobat once.
I can scan from the scanner software - Lexmark 4850 - with a jpeg straight to Acrobat but want to try to solve the issue of scanning straight from the app.
Thanks for your help people.
Regards
PaulAfter I discovered my problem of quitting after completing the scan of the first side of a 2-sided document and decided to go to Adobe for help, I should have known I was in real trouble after following their instructions for locating the Acrobat serial number. After bringing up the splash screen and clicking on it, instead of seeing the number the splash screen disappeared! So I had no option but to use the phone. Then their help person couldn't give me the serial number- he had to transfer me- and I chose to stay with him for help instead. He decided it was a conflict between the Acrobat & HP software and ended the help session.
I then did some on-line research and discovered others with the same problem, and came up with the comparison test with the Windows version. Adobe's phone system didn't recognize my Case #, but the second Help person said it worked fine. At that point, I got the feeling that I was in real trouble. After another hour going over the same ground and repeated denials that their software was at fault, the Helper refused my request that they do a Windows comparison test or send me a Windows version to test myself and promised to call me back with results of their "research". That call never came.
On the third call, again with the Case # unrecognized by the phone system, the Helper was even more unhelpful, probably after reading the record of the first two calls. He insisted on going back to the machine and over the same ground once again, and I ended the call.
I agree that the on line approach is better, and I may have to make a double call to get the serial number (neither of the two I have, each different on the case or on the CD worked) and try that if my request for a supervisor fails. Fortunately they are so incompetent that they can't track starting over.
I'm not a programmer, but have lots of varying experience with computers dating back to the first Atari-400. Since your Acrobat uses only the Twain driver component from your scanner software, the first place to look for a problem is in the Acrobat software, especially since the software doesn't run again after the first use without reinstalling, and the scanner continues to perform properly using it's installed software. The Windows comparison test such as Tim Whitfield was able to make, would clearly establish the Mac version of the Acrobat software to be at fault, but would still not resolve our problems. Unfortunately I hold out little hope for either you or I with Adobe, since neither their phone nor the online help has come up with a prior fix. This indicates a bug fix requirement, which for something like this looks to be a relatively long time in coming. -
When creating PDFs, the PDF does not open.
I am using Acrobat Pro X...and have had no problem creating PDFs. Suddenly today when I create the PDFs, although they are created, the PDF does not automatically open upon creation (I have to go to the file folder location and open the PDF).
I tried repairing the Acrobat installation and that didn't help. And actually when trying through the Control Panel, a 2nd PDF printer was created which I cannot figure out how to delete (they both are listed under the same Adobe PDF printer).
So, the main issue is fixing so I the PDF automatically opens upon being created.....but if someone can help with the 2nd PDF printer that would be appreciated.
SteveThe check box is in the default properties of the Adobe PDF printer, under the settings tab. Get there with Start>Printers>select Adobe PDF and right click to check printing preferences. This is a selection, not a reason to reinstall. How it got unchecked is a different question.
If there are Adobe PDF printers present, just delete one of them or rename the second one to something else (like Adobe PDF backup). -
Page size error when creating PDF from Excel 2013
Hello,
I am using Acrobat Pro XI, and am creating a PDF from Excel 2013. I have updated Acrobat to the latest version (11.0.4). I am using the Acrobat CreatePDF add-in inside Excel to convert a spreadsheet to PDF. However, when I create the PDF, the page size doubles from 8.5" x 11" to 17" x 22". I have checked the print settings inside Excel to insure that the content fits onto an 8.5" x 11" page. I also checked the Preferences->Advanced Preferences of the Create PDF add-in and confirmed that the default page size is set to 8.5" x 11". Does anyone know why it is creating the PDF with a 17" x 22" page size? Also, can the page be resized back down to 8.5" x 11" within Acrobat Pro XI?Hello - this did not happen when I printed the file to the Adobe PDF printer. It correctly sized the sheet as 8.5" x 11". Thanks for the suggestion. Also, it will properly print out to the physical printer.
The main problem is when I am combining several PDFs into one document, I have some sheets sized at 8.5" x 11" and some at 17" x 22", so the document looks strange when viewing it online. I am still not sure why the Create PDF add-in creates a different sized PDF than the Print to PDF function. -
Ability to turn headings into graphics when creating PDFs
I would like the ability to convert the text headings and footers into graphical images whenever I create PDFs.
My reason for this wish is that when you search for a text string in a PDF, it is very annoying when you keep getting hits that occur in headers or footers.
Thanks,
SusanSusan,
It would be much easier to convert the header and footer into a graphic
yourself. That way you could determine the type of graphic that would be
appropriate for your application---high def raster image, outline text, etc.
Mike
Maybe you are looking for
-
How can I share PDF documents in Ibooks
How can I share PDF between my Apple devices with Ibooks? I have on my Ipad a lot of PDF manuals that I want to see on my other devices so I don´t need to download them to Ibooks on every device. Sync is on in the setup but it seems only to work with
-
Nokia lumia 1520 network issue(SIM not active) aft...
Dear Nokia/Microsoft Team, can someone assist me on this issue. I was using my Nokia Lumia 1520 with W8. I got notification to update to W8.1. After update now Sim not getting active. I am unable to change from flight mode. Also I tried to downgrade
-
ILife does not appear as purchased in the Mac App Store
I already bought the CD iLife 11 but in the Mac App Store does not appear as Purchased, how can I do it? Thanksi
-
Outlook 2010 Auto Config doesnt tick the "use outgoing mail server auth" settings
Hi Guys I've got a domain here and an auto-config setup for Outlook whereby it goes to a website on the domain controller and downloads an xml looking like this: <?xml version='1.0' encoding='utf-8' ?> <Autodiscover xmlns='http://schemas.microsoft.co
-
Display is dead, how do I find if I have that nasty NVIDIA card???
Well, my laptop went out of warranty 2.5 weeks ago. Monday night I was using my computer just fine. Tuesday morning went to it and the display was dead. I checked the brightness, tried booting in different ways, and will try the PRAM and SMC clearing