Stylus for Tablets.. How about use on Cellphones as Well

I wanted to ask a Question i hope it doesn't come Over as Dumb one but here it Goes i want to Get a Stylus for My Droid X an my Razr Maxx i found one at Office Maxx. It's made by Targus i want to use it. As some times it's hard to hit those little Keys when Texting. Here's look at it.
Targus Stylus for Tablets- Green ,
The Targus Stylus for Apple iPad makes it easy to take notes, draw or simply turn a page. The stylus features a durable rubber tip that won't scratch the iPad's surface and allows the user to type accurately and comfortably. The stylus engages directly with your electronic, touch-screen device, requires no power or software to operate and instantly works right out of the box. Featuring a vibrant blue color to match the Apple iPad Smart Cover, this accessory is both stylish and convenient for daily use.

I don't think it's a dumb question! I used a stylus for years on my Palm Treos. At times it could be very handy. Then out came iPhones and Androids, and oh, a stylus is too crude and backward for these slick devices! (Oops, too sarcastic. )
But check this: http://pocketnow.com/android/samsung-announces-galaxy-note-smartphone-the-stylus-is-back . Everything old is new again, I guess.
I think the stylus is a personal preference. Some people like 'em and some hate 'em. If you want one and it works for you, go for it! But you should definitely try it out to see if it actually works on your phone before buying.
And for some light reading from an anti-stylus point of view: http://www.extremetech.com/computing/98923-how-steve-jobs-killed-the-stylus-and-made-smartphones-usable

Similar Messages

How about use partial key to loop at a hashed table?

Such as I want to loop a Internal table of BSID according to BKPF.
data itab_bsid type hashed table of BSID with unique key bukrs belnr gjahr buzid.
Loop at itab_bsid where bukrs = wa_bkpf-bukrs
and belnr = wa_bkpf-belnr
and gjahr = wa_bkpf-gjahr.
endloop.
I know if you use all key to access this hashed table ,it is certainly quick, and my question is when i use partial key of this internal hashed table to loop it, how about its performance.
Another question is in this case(BSID have many many record) , Sorted table and Hashed table , Which is better in performance.

You can't cast b/w data reference which l_tax is and object reference which l_o_tax_code is.
osref is a generic object type and you store a reference to some object in it, right? So the question is: what kind of object you store there? Please note - this must be an object reference , not data reference .
i.e
"here goes some class
class zcl_spfli definition.
endclass.
class zcl_spfli implementation.
endclass.
"here is an OBJECT REFERENCE for it, (so I refer to a class) i.e persistent object to table SPFLI
data oref_spfli type ref to zcl_spfli.
"but here I have a DATA REFERENCE (so I refer to some data object) i.e DDIC structure SPFLI
data dref_spfli type ref to spfli.
So my OSREF can hold only oref_spfli but it not intended for dref_spfli . That's why you get this syntax error. Once you have stored reference to zcl_spfli in osref then you will be able to dereference it and access this object's attributes.
data: osref type osref.
create object osref_spfli.
osref = osref_spfli.
"now osref holds reference to object, you can deference it
oref_spfli ?= osref.
osref_spfli->some_attribute = ....
OSREFTAB is just a table whose line is of type OSREF (so can hold multiple object references - one in each line).
Regards
Marcin

Type of stylus for iPad2 -- can I use one from a Treo

I have some old styluses from an old smart phone (Treo?) and wanted to know the specs for one to use for an iPad2. i.e., can I use that old soft-tipped stylus for my iPad2? How do I know which ones are "safe"?
Thank you,
Ron

The Treo used a different type of touch screen. The stylus won't work on the iPad. There are lots of different brands out there. Just search Amazon for iPad Stylus. It's important to note that any stylus that works with the iPad's capacitive touch screen will have a fairly wide, soft tip.

New Advanced tab for Calibration-how to use properly?

Dear Adobe and Lens profilers,
I have just used the newest Lens Profile version and noticed the new "Advanced" tab on the right beside "Calibration". There are lots of choices for rectilinear, fisheye, distortion, etc. I need information on how to use the advanced tab - I do not see updates to the user guides that are available that address this new tab. For example, there are "one parameter radial distortion" up to five parameters for various items, there is a sensor pixel shape choice - could someone from Adobe please address and explain these choices and how to properly set them for use,(including the vignette model and principal point choices, and all of these).
Thank you,
Debra

Hi Debra, in general, the higher the number of parameters, the better the potential for correction (especially for full frame cameras). For example, the three-parameter radial model in some cases will do a better job than the two-parameter radial model. I have not found cases yet where the 5 parameter (radial & tangential) model is helpful. As you can see, the default option is Auto which means Lens Profile Creator does an internal comparison of which model works best for your provided measurement data, and picks the appropriate model automatically. (This is largely why it is not necessary to fiddle with the Advanced settings.)
When you find cases where Lens Profile Creator is not building a satisfactory profile, my experience has been that the common issues cannot actually be addressed by using the Advanced settings. For example, if the profile is slightly overcorrecting for vignetting, changing the Vignette model parameters in the Advanced section often does not help. (This does not mean that future versions of ALPC won't provide other ways to deal with it. It just means that for now ALPC does not provide a direct means by which to tweak a profile that is slightly off.) If you are using Camera Raw or Lightroom, my suggestion is to use the "Correction Amount" sliders beneath the profile selection to adjust the correction. In the vignette overcorrection case, instead of using the default value of 100, dial it back to 80 or 60 (as an example)

IRecovery: who is it for? how to use it?

Is this something that jailbreaks your phone?
I've tried downloading the downloads that it says to for a windows computer but when i go to open them to "unzip" them it asks for which program to use.
What do i do?

Hi Ria,
From what I understand, you cannot use JOINS with FOR ALL ENTRIES in 4.5b & lower versions. In general the SELECT..FOR ALL ENTRIES statement has been in use from 3.1i versions. For more information, PL take a look at OSS Note #652634.
Regards,
Suresh Datti

After installed language for solaris, how to use it in Netscape

After installed languages for solaris,
How can I see them in Netscape:
View/Character set/...
Do i need to modify some files?
Thanks
Joanna

Hi,
Not certain what your external system is, but it may be worthwhile to go through the QM-IDI documentation to see if that meets your requirements
http://help.sap.com/saphelp_erp60_sp/helpdata/en/26/b43927506511d182c20000e829fbfe/frameset.htm
Alternately, take a look at BAPI_INSPOPER_GETDETAIL to determine how the lot expects to receive results, and BAPI_INSPOPER_RECORDRESULTS to set the results accordingly
Regards,
JL

How about using a 60fps video for a smooth slow motion effect in a 30fps project ?

Hey all,
I happen to have a video camera that is able to shoot either in 720p/60fps or 720p/30fps.
As you guessed it, 60 fps mode is very useful for action sports when you want to do some slow motion effect running very smoothly.
I have few questions I would love to be answered, and I was not able to find answers till now.
Here they are :
1/ If I want my final video file to be, let's say, 25 fps, is it mandatory that my project is 25 fps too ?
What will happen if I do a 30fps project and that I export to a 25fps file ? Does Premiere simply remove some extra frames ? Or will it lead to a longer video ? What consequence on the final result if frames are removed ? I mean, will I be able to see any difference or will the difference remain theorical ?
2/ Let's say I have both 30fps and 60fps videos. I set my project to 30fps. If I import my 60fps video to the timeline, it will be adjusted to 30fps and some frames disappear to keep the duration the same. Okay, this is clear to me.
But now, what if I import my 60fps to the timeline, but set the speed to 50% ? Will Premiere apply the 50% to the original file (therefore I should have all the frames displayed on the timeline : 60/2=30 fps), or to the 30fps-adjusted file of the timeline, leading to some jerky footage?
3/ If I want to use my 60fps for slow motion purpose in my 30fps project, would it be a good idea to right-click on this file in the project windows, going to the "modify" menu to set the image frequency to 30fps ?
Because while doing so, if I drag the file to the timeline, I noticed it would last 2 times longer (resulting in a slow motion video) Does that mean that ALL the frames of the original video are displayed ? Can someone tell me what exactly does Premiere ?
I would be very grateful if someone could tell me what are the correct settings to chose in order to realise the best slow motion videos as possible.
Thanks in advance !

With due respect... this does not answer my question and does not help me that much , but anyway, thank you for the very constructive answer ^^.
I'm not sure I would even have considered doing this by myself...
I hope I do not get this kind of answer because you feel like my question was silly or unpolite... To my mind this was a pretty serious question.
Shooternz, next time you need to go 150 km far away from where you are, go by feet rather than with a car, I'm sure you will have plenty of satisfaction too. Just cross the fingers for you not to be in a hurry while it's raining outside.
Well, I may be naive but i thought some experts already had the answer to this (I guess I'm not the only one who intend to do some slo mo), and would have been kind enough to share this knowledge with me. That's what sometimes happens in communities.
Please note I do not intend others to do the job for me, I'm just asking if someone already knows the answer.
I asked this question because I couldn't find any documentation about this, and I guess asking on internet was the next step, as testing would be like the last resort, being very time consuming.
It was easy to check the effect of dragging a file to the timeline to see if it played normally or not, but it's definitely not to count and compare each frame of some sample file to find if some are lacking, or have been doubled or what....
I assume I would be very happy with just a simple theorical answer either...
So once again, if someone already has been into such questions, I would really pleased him or her to share or report what they experienced. Thanks in advance.

Hi,I'm a new mac user and happy about it so far. I've heard there is a built in pdf creator in OS X. Any tips for me how to use it?

Any tips on how to create pdf's on my mac will do I've installed Mountain Lion by the way and it's working great!

Go to Print and in the bottom left hand corner is a button "Print to PDF".

Scan to PDF files too large! - Why?? Solution for Windows - How about Mac? (HP-8630)

Scanning a document to a PDF file of reasonable size has been addressed many times - it is always an issue! My wife is a realtor and frequently needs to scan multiple page documents. I found an actual solution last night:
27 page letter-size B&W document - Scan to PDF on my HP-8630 AIO using HP software at 300dpi, small file size, BW: 27MB! Too big to email.
Solution (in Windows 7 at least), if you have Adobe Acrobat:
Open Adobe Acrobat, go to File Menu - Create - PDF from Scanner - Configure Presets. Select and configure "Black and White Document":
Select TWAIN device (NOT WIA) as the scanner; black and white, 300dpi, file size one notch to left (smaller) from center, check "optimize after scan". Select paper size and one- or two-sided scanning. Uncheck "make searchable". Save the preset. (The TWAIN driver was apparently installed with the HP installer, since I did not have to look for it.)
After placing pages in the Doc Feeder, go to File Menu, Create - PDF from Scanner - Black and White Document. Watch the magic!
File size 768k! Quality indistinguishable from the 27MB version, sharp and clear, all 27 pages! Really!
Using the HP software, using a lower resolution or sliding the file size slider to smaller makes a muddy scan, and the file is still huge compared to the Acrobat technique. MUCH worse quality than the Acrobat 768k version.
Interestingly, using Acrobat to open the 27MB scan and "PRINT" it to the PDF Printer reduced the size to 10MB, with no change in appearance. "Save as smaller PDF" did not reduce the size further.
What gives, HP?? What can Acrobat do to scan from your AIO that you can't do?
I tried on my Mac as well - we use both. No go. On Mac OSX 10.10.1 with latest HP drivers, Acrobat does not see any TWAIN or other driver from within the dialog box described above. Scanning from HP software again yields about 1MB per page.
Anyone know how to make Acrobat see the scanner on Mac?

Hi @JosephWit ,
I see by your post that you are having issues with the PDF scanning size being too big. I will do my best to assist you with this issue.
The drivers for 10.10 are installed by the Apple Updates. Did you install the 10.9 drivers or are did up run the Apple Updates to install the printer?
Uninstall the 10.9 printer software and run the Apple Updates to install the proper drivers. Then you can scan with the Apple Software.
Connect the printer to the Mac by a USB cable and run the Apple Updates to install the printer drivers.
Go to the Apple, About this Mac, click on the Overview tab and select Software Updates.
Go to the Apple, Printers and Scanners, delete the USB drivers and disconnect the USB cable.
Then add the wireless printer as a Bonjour printer if the printer is networked.
Click on the + sign, highlight the printer, below beside Use: make sure just the printer name is listed. (you might have to click on the drop down to select your printer from the list)
Here is a document for Scanning in OS X v10.10 Yosemite Without HP Software.
If you are having issues with Adobe, run the updates. Product updates.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Thought I already asked this, but don't see it. Want to know what the "Render" feature is for and how you use it.

I've watched several of the tutorials. I was able to upload a video yesterday to YouTube, but today, I made a new video, and after three tries, never could get it to upload. Kept getting an error asking if I wanted to TRY AGAIN.
As I was editing my video, the sound never seemed to work right with the video. The video would freeze, and the sound would keep going. Strange. I figured I needed to push "Render", but have no idea what it does. Can't find a tut on it.
Any help will be much appreciated. I have six versions of PS, and I have never been able to get videos to upload to YouTube except for the one I got to go yesterday. Failure today.
Joy

Joy
Big question. After you pressed the Render button and the Timeline rendering was completed, did the video portion play back better in the Edit area monitor?
Timeline rendering is just a preview feature. It does not fix a problem. It is the program telling you if you are viewing the best possible preview that the project has to offer. The program uses a color indicator line over the Timeline content to tell you if you are seeing the best possible preview.
No color line or green line = you are seeing the best possible preview, no Timeline rendering needed or available. In this condition, if you hit the Render button, all you will do is play back the Timeline content in the monitor...no Timeline Rendering. An orange line over the Timeline content is the program telling you that you do not have the best possible preview and in order get that you need do Timeline rendering. You can do that
a. pressing the Render button above the Timeline area
b. going to Timeline Menu/Render Work Area or use the shortcut for that, just press the Enter Key of the computer main keyboard.
You do not have to do Timeline rendering, but it is your window of opportunity to catch a problem sooner than later. It is particularly indicated
when for titles, effects, transitions, and non native formats.
And, if you are getting the orange line over content suggesting that you do Timeline rendering, you can select the area where you
want the rendering done under that orange line.....you set the gray tabs of the Work Area Bar to span the area that you want rendered.
Also, the process of Timeline rendering deposits preview files on your hard drive automatically. These preview fields for a SD project are DV AVI files (whether you render a still or video file) and for HD project are MPEG2.mpg files (whether you render a still or video file). You should keep watch for pile ups of those preview files if you are getting in a free hard drive space crunch.
Screenshot from Premiere Elements 11
This screenshot is from Premiere Elements 12
I could go on and on about Timeline Rendering. Do you want more?
As for the workflow problems that you are now having, have we discussed them before. I will look for any of your prior threads to see
if we have talked about these problems before.
Please let me know if you are OK with the above.
Thanks.
ATR

What chair stand for and how to use it ?

I cannot find any explanation about "chair" and "group" in lightning, when to use them, and what difference there is between chair and required or optional attendee.
Moreover if I send an appointment to a list, do I have to use chair and individual or optional attendee and group ?
Thanks

"Chair" means the owner or chairman (political correctness requires we say "chair" because "chairman" is apparently sexist, and "chairperson" annoys some people) of the meeting. There doesn't need to be one, I think; I can't ever recall using "chair" when issuing invitations. If it's ''your ''meeting then maybe you are the "chair". ;-)
"Group" probably means a Mailing List; a pre-built and ready-to use list of email contacts. I use these for project members at work, and for family at home. You can create these Mailing Lists in your Address Book.
In a business meeting, there may be particular experts or specialists who need to be there for the meeting to have any useful outcome, so they are "required". There may be others for whom it would be useful to attend the meeting but their absence wouldn't prevent the meeting being successful. They are "optional".
All rather a lot of overkill for informal appointments between friends or family. ;-)

What is best method for learning how to use mySQL with Coldfusion?

I have been using access databases for years with Coldfusion. I have a client that wants me to build an online classroom. I figure it's time to finally start using mySQL, but there is so much info out there, I don't know which way to turn.
Where do you experts recommend I get started?
Also, I am using coldfusion entrprise on my system at home. My machine is a 64-bit, 3.30Ghz AMD FX - 6100 six-core processor with 8gig of ram. Can I install mySQL on the machine and run CF8 without any problems?

How much RAM left on your system? If the computer is strictly for development, then you have more than enough to run ColdFusion, MySQL, browsers, and other development tools.
For MySQL download the MySQL Community Server and MySQL Workbench. There is also all-in-one package for Windows, http://dev.mysql.com/downloads/windows/installer/ that you don't need to download the server and workbench separately. The installation should be straight forward.
By the way, other CF users may suggest you to use MariaDB (https://mariadb.org/), which is a branch of MySQL.

One css for phone, one css for tablet : how ?

Hi
Here is my problem : i'm able to detect if the my mobile application run on a tablet or on a phone by calculating the diagonal of the stage
But then, i need to load the good css : the smarphone.css or the tablet.css
I try by compiling css as swf, BUT the problem : iOS doesn't permit to load external swf and in this case, smartphone.swf or tablet.swf are external swf
So my needs is to switch the css at runtime, but not by loading external swf
I try with <fx:Style source.myStateTablet="" /> but it's not possible
Any ideas ?
Thanks
Sebastien

Hi
Actually my css is like that :
tablet.css :
components|Header
    skinClass: ClassReference("com.zapmeeting.zinfotv.skins.tablet.header.HeaderSkin");
smartphone.css :
components|Header
    skinClass: ClassReference("com.zapmeeting.zinfotv.skins.mobile.header.HeaderSkin");
In fact, I use css juste to reference skinClass and so apply a skin
So your idea is to make juse one css, called main.css and then paste in the above code ?
components|Header
    skinClass: ClassReference("com.zapmeeting.zinfotv.skins.tablet.header.HeaderSkin");
components|Header
    skinClass: ClassReference("com.zapmeeting.zinfotv.skins.mobile.header.HeaderSkin");
but how redirect the user to the correct skinClass ?
could I insert a state query like :
components.tablet|Header
    skinClass: ClassReference("com.zapmeeting.zinfotv.skins.tablet.header.HeaderSkin");
where tablet and smartphone are two states ?

Good resources for learning how to use Aperture's adjustments

I'm a long-time visual artist who is just now getting into photography. I own both Lightroom and Aperture, and I must say that, for me, Aperture's interface and philosophy are my favorites. I love the way it handles photo organization. I have one problem, however. Being a relative photographic newbie, I have a terrible time with the adjustments. I seem to have a much easier time making good-looking adjustments in Lightroom. In Aperture, I just aimlessly noodle around, make a mess, and undo all my changes regularly.
I just found the Apple manual on making adjustments. I was wondering what other resources you more experienced photographers used to learn your way around.
Thanks,
Mark

Thanks I have that one on order from Amazon even as we speak. As an update, I've also found some information on bagelturf.com, and it looks as though Aperture Users Professional Network is going to start a 7-part series on Adjustments in Aperture. That sounds just like what the doctor ordered.
O'Reilly's "Inside Aperture" site also seems worthwhile. I'm sure you all know about these. I'm glad they're there. I've subscribed to a couple of podcasts as well.
Mark

The Element tag for CSS - how to use it?

Hi,
I was watching this video and this guy was using Inspect Element in Chrome to identify things he wanted to change in a web page. I remember him using this a lot:
element.style {
...and then write in Dreamweaver the changes to his CSS. I've not been able to figure out what that above element.style means though. Can someone help explain what it is? Do I need to use it every time I want to add a change to my existing CSS file? Sorry this is a vague question but I just want to understand it better. For some reason, I've gone to W3 school and still can't find anything.
Thanks.

At a guess
element.style {
is a generic term meaning exactly that.
element is the element that is being referenced as in p, div, span, h2 etc, etc.
.style is the class that has been assigned to the element for identification.
If we wanted to change the colour of the text of a particular heading we would use
h2.red {
color: red;
and our markup would look like
<h2 class="red">This is my red heading</h2>

Stylus for Tablets.. How about use on Cellphones as Well

Similar Messages

Maybe you are looking for