Stylus for the Stream 7 and Windows 8.1

Ok, honestly I'm much more of a Mac guy these days, and used iOS since it's earliest incarnations.  Got the Stream 7 due to cost and curiousity.
What I've noticed is that with this size screen - it is almost impossible to use the desktop apps due to the extremely small size of controls, "hot points", etc.
I've used some of the "#75 rubber eraser bludgeon" type stylii, which I've never really liked, and have been looking for some kind of stylus that has a fine tip (around 2mm).  I can find some for iOS, but first, they are app specific (even on iOS), and due to that - only work on iOS.
So:
1.  2mm tip, or thereabouts
2.  capacitive - works on any capacitive screen - iOS, Android, Windows 8/10 tablets
3.  Do NOT care about pressure levels (if feature is there, and it still works as a capacitive stylus - fine)
4.  $50 USD or less
I might go more than that, but ONLY if it can work with basically ANY capacitive screen. 

Hi @tundrwd ,
I don't think there are any passive stylus models for capacitive screens with a 2mm tip. The tip needs a larger surface area to be registered by the sensors in the screen (unless you have a touchscreen device that works with a battery-powered active stylus).
The best solution I've found is the Adonit Jot Pro. It has a nice fine tip for detail work, but the tip is covered by a see-through plastic disk that gives it enough surface area to work. The disk swivels around on the ball point and adjusts instantly to a wide range of writing angles. It also works on every capacitive touchscreen.
Please click the thumbs up button to say "Thanks!"
Clicking "Accept as Solution" on a reply that solves your problem makes it easier for other people to find solutions.
I am an HP employee.

Similar Messages

  • I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

    I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
    Thanks

    You are mixing up a couple of things here.
    The TC drive cannot be partitioned without removing it.. did you do that?
    If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
    You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
    There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
    Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
    Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
    You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

  • Preparation for installing bootcamp and windows 7, and in the absence of a DVD drive

    I am not sure that I submitted this with the right boxes ticked, so i am re submitting it!
    In preparation for installing bootcamp and windows 7, and in the absence of a DVD drive on my MacBook Air, before starting, can I partition my external drive (for use with my Mac) to have an ISO image file location for Windows downloads? 
    Cyfromayo

    The Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/
    The Boot Camp Discussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp

  • Am I reading the absence of response of preparation for installing bootcamp and windows 7 correctly?

    Hi,
    Am I reading the absence of response on "preparation for installing bootcamp and windows 7", correctly?,
    There is a number of BOOTCAMP problems? which have no successful outcome yet?

    Pete
    I think that I should have said, Am I reading into the absense of response correctly, (after failed attempts to get a response) on the BOOTCAMP preparation issue.
    there is no Link that I can find solutons on, just a number of questions in the MORE LIKE THIS frame.
    Cy

  • I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office.  How easy or difficult is it to transfer data files between the iPad and Windows?  Are there obvious problems or the need for some form of conversion programs?

    I am thinking of buying a iPad but my main desktop machine uses Windows 7 and MS Office.  How easy or difficult is it to transfer data files between the iPad and Windows?  Are there obvious problems or the need for some form of conversion programs?
    Many thanks for any advice.
    David

    You don't need conversion programs, iTunes can copy most of your content over to the iPad via the file sharing section, and some apps also support Dropbox, email attachments, transfer via your wifi network. There are a number of apps that you can get that support Microsoft office file (microsoft don't make an app versions of their software) e.g. from Apple there are Pages (word support), Numbers (excel) and Keynote (powerpoint), and from third-parties there are apps such as Documents To Go and QuickOffice HD

  • I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1

    I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1

    Hi Jim, thank for the answer. It works thank you very much..
    Kind regards.
    Louis Dijksman
    Op 24 jan. 2015, om 20:55 heeft JimHess <[email protected]> het volgende geschreven:
    I have lost the possibility to control sharpness. I've lost the window to look at for the sharpness and the buttons... I am using a Mac 10.9.5 and Lightroom 5.7.1
    created by JimHess in Photoshop Lightroom - View the full discussion
    I am interpreting that to say that the detail panel is missing your develop module. If that is the case, right-click on one of the other panel headings and make sure there is a checkmark for detail.
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7128302#7128302 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7128302#7128302
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Attachments dont download from Gmail in Safari, They disappear,I even tried re-downloading Safari and that download disappeared, it is not in my downloads folder, I actually searched in finder for the file and it is nowhere on my computer.  Please help!

    Attachments dont download from Gmail in Safari, They disappear,I even tried re-downloading Safari and that download disappeared, it is not in my downloads folder, I actually searched in finder for the file and it is nowhere on my computer.  Please help!

    Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
    First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
    Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
    When I went back to my phone and tried installing them again (still on my computer), it worked!
    I hope this helps, because it was incredibly frustrating. Good luck!

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Need driver for iPod video and Windows Vista

    I had an iPod video and it synched no problem to my computer. There was a hardware issue inside the iPod so i sent it back and got a new one. Now when I connect it to my computer, it brings up the looking for a driver window and says it can't find it. Its only been a week since it worked fine.. I don't know if there is an issue with the new iTunes or what but has anyone had any experience with this issue or can simply tell me where to directly download or find the driver?

    I too have had a problem with needing a driver for ipod. My ipod was working fine, then my computer stopped recognizing the ipod. It says it needs a driver for the ipod and I can't find one anywhere...need help..please

  • The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • My purchases show partially downloaded. When I attempt to resume the download I recieve an error message " an unknown error occurred -50" Itunes has charged for the download and sent a reciept however the shows wont play?

    My Purchases show partially downloaded. When I attempt to resume the download I recieve an error message: "an unknown error occurred -50". I tunes has charged for the download and sent a reciept however the shows wont play?

    I had the same problem so (assuming under the Purchased items in the Store you have a song stuck at 'Downloading'):
    I went to Music, then Artists.
    From there I chose the album.
    The song that failed to download had the cloud symbol next to it.
    I clicked the cloud symbol and the song completed the download for me.
    (Please note this was in iTunes for Windows - I expect it to be similar in iTunes for Apple)
    Message was edited by: UbergeekRFC - parenthetical note added
    Message was edited by: UbergeekRFC - added note about song stuck as downloading

  • A document page opens that is too big for the display and runs off the end of the monitor

    How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Save for the web and devices

    Hi,
    Im trying to save for the web and devices my work, but the work is not displaying at the save window.
    Any ideas?
    Many thanks
    http://www.flickr.com/photos/92610801@N03/

    Emil,
    I'm not sure if I can trust my eyes, but isn't that emblem on a Template Layer which is not recognised by Save for Web?

  • How do I disable transparency for the menubar and addressbar in firefox?

    How do I disable transparency for the menubar and addressbar in firefox? (This does not mean disable windows aero or transparency in windows 7. A workaround has been posted. Stop spamming threads with disable transparency and aero everytime someone asks about this.)
    It is difficult to read.
    Edit:
    Is there a setting to tone down the Aero usage of the in Firefox 5 so it looks more like Firefox 3.6. Is there a way to do this in the preferences or inside about:config?
    I know what Aero is and how to turn it off.
    The 2nd reply has images attached show why it is difficult to read. An light spot on a desktop background or an icon can make it very difficult to read. This is the #1 reason why I keep going back to 3.6.

    If you are up to tweaking some CSS code in a style see
    "Color Toolbar(s) to identify profile (DM*)" -- in http://userstyles.org/styles/9514, and you must read all of the description material understand what has to be done.
    It is a style, and playing with the code is what styles are about. You will have to copy the section of code in the description to the bottom of the style for it to be complete to remove additional Aero effects, and choose two or three colors for the toolbars.

  • Simple MP games for OS X and Windows

    hello all,
    I am having trouble finding simple multiplayer games that have versions both for OS X and Windows XP.
    Have PC laptop and ibook, both with WiFi, and would like to play games with my girlfriend. That's why simple games as she doesnt like those Ghost Recon stuff etc. but freeware/shareware ones.
    Has anyone managed to find such games?
    Thnx
    Tom

    Hi, Thomas.
    When looking for new applications, including games, I recommend searching MacUpdate or Version Tracker. The user-submitted reviews accompanying the listings can be helpful in sorting the wheat from the chaff.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

Maybe you are looking for

  • Data Federator - Read timed out

    Hi, I'm using Data Federator XI 3.0 SP2. I have a datasource connecting to a web service. The web service may return take a long time to do heavy processing, etc., before returning any data. If I call the web service via Data Federator, I will get th

  • Error during call sqlldr - ODI version 11.1.1.3 and java 1.6.0_30

    Hey All, I have scroll thru forums for resolution of similar issue but no luck. Here is the problem this is working fine in ODI version 11.1.1.5, Except the file is mapped to local drive. Now below is the error message from ODI 11.1.1.3, Trying to us

  • Upgrade to DDR2 800 RAM

    This may be a silly question (for which apologies) but I did search and could not find an immediately obvious answer...in order to take advantage of the 800 Mhz FSB in the new iMacs, could I replace the DDR2 667 Mhz RAM modules with DDR 800 Mhz RAM m

  • Just installed ODT 11.1.0.6.20 but can't find Oracle Explorer

    I downloaded and installed the latest ODT but there is no Oracle Explorer under the View menu option of VS2008. Installation went fine with no errors. I could see the new debugging options under the Tools menu option. I even uninstalled just the deve

  • Quick paint stoke question

    Very quick and hopefully easy: How do you make a paint stroke in a straight line? I tried putting in a guide, but my hands aren't talented enough to do a perfect straight line. Thanks all