Stylus original/RMX in LP8 install

Ok I know this isn't directly related to Logic Pro but it's important that I get a quick answer so I was hoping for someone to help me with a quick answer.
Do I need to install the original STYLUS and then STYLUS RMX to have the original STYLUS sounds in RMX? Or can I just immediately install RMX and it will automatically have the ORIGINAL STYLUS sounds in there too?
Please really need this answer, can't seem to find it on spectrasonics website.
Thanks

Oh by the way I figured it out and the answer is yes, you install RMX and it has the 1st stylus data in also.

Similar Messages

I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

If it is the first CS version then you will need to check out the following. I believe it applies to CS as well even though it specifies CS2....
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

How to repair disc on second partition iMac 27? 10.6.8, but second is still 10.6.3. Can I use the original 10.6.3 install disc to start, and then go to the side needing repair?

Partitioned iMac 27, Sept. 2010. Verify disc on HD2 says "corrupted, needs repair," unspecified. "Use install disc to repair." HD2 is isolated from Internet since birth. HD 10.6.8, but HD2 is still 10.6.3. Can I use the original 10.6.3 install disc to start, and then go to the side needing repair, without a problem?
Part 2: After 4 years, suddenly when HD2 is revived from sleep, it makes an Internet connection, all settings are the same, Network shows Ethernet is unplugged, but the indicator from modem shows connection. Maybe connected to first part of my question, but maybe not.
Thank you.

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

I have an iPad that was setup on a laptop that has been reimaged. The iPad then had a password put on it and my kid doesn't rememer the password. Since I don't have the original laptop with iTunes installed I cannot reset the iPad to the factory default

I have an iPad that was setup on a laptop that has been reimaged. The iPad then had a password put on it and my kid who doesn't rememer the password. Since I don't have the original laptop with iTunes installed I cannot reset the iPad to the factory default. Any suggestions on how to reset to the iPad?
Thank you

Try recovery mode. I think this should work. You can read the instructions here.
http://support.apple.com/kb/ht4097

Epson Stylus Photo R1800: successful Firewire install on Intel iMac?

Has anyone been able to succesfully install the Epson Stylus Photo R1800 on an Intel iMac using the Firewire connection?
After installing the Intel drivers from the Epson website, if I connect the printer via the USB cable the printer and associated driver show up in the Printer Setup Utility just fine. But if I connect the printer via the Firewire cable I just see a printer named "E" in the printer setup utility and no R1800 driver at all.
Epson support just keeps instructing me to uninstall and reinstall the driver.
I've hunted around in the discussions here and have noticed some people having trouble with this particular printer, but I've been unable to establish whether anyone has been succesful with the Intel iMac/Firewire combination.
iMac 20" Intel Core Duo Mac OS X (10.4.5)

I am printing with a firewire connection. I have an intel iMac. Prior to buying the R1800, I checked out Epson's site for new intel printer drivers. A new update has been posted with an alert about the bundled software that comes with the R1800-don't install it! And if it was installed there's an uninstall walk through. The software did not come anywhere near my new imac. I downloaded the new software and I am printing with a firewire connection. I have one issue with the download. I can't print CDs because the application is on the original software cd. I contacted Epson and asked if I could install just the CD print software and not the printer driver. I will be waiting for an answer. I installed the software on a powerPC imac tiger. The printer is firewire connected and there are no printing problems, I can even print CD labels.
I will post epson's response.

I want to reload original software in IMAC G4 - i have original disks, can i install OSX first and then load "software restore 1 to 6" and not load OS9

I just purchased a used IMAC G4, cpu G4(1.1), powermac 4,2, 800MHz 15 inch FP and 55 Gig hard drive. I now have 750 k memory and it is working fine. i want to reload the original software. i have all original disks -CDs. These include OSX Install; OS9 Install; Software Restore 1 to 6 CDs; Imac applications.
Question, please, is which CD do i load first? Also i hope it is not necessary to load OS9. I would think OSX install first and then the software restore disks and then the imac applications?
Thanks.
Robert.

Boot from the disc labeled Disc One. Follow instructions and when you get to the part to select a Destination/Target drive click once on the drive then click on the Options button. Select the option for Erase and Install then click on the OK button and proceed.
You do not have to install OS 9. If you don't then you simply cannot use the OS X Classic emulator.
I believe there is a separate installer on Disc One for restoring pre-bundled software.

If ONLY the original Dev Beta is installed, will GM Candidate install over this without intervening betas?

I have an odd problem.
I installed the Yosemite dev beta back in August, and have all the intervening beta patches AND the GM Patch. My 7 1/2 year old iMac is failing, so I ordered a new one. It's supposed to be in today, and want to get it up to the Yosemite GM release.
So - is it possible to download and update JUST the original Yosemite beta, and then when I go to App Store, I will download and install ONLY the GM Candidate, and skip betas 2-8? It just takes my internet connection forever to download all the betas (due to size), and I'd basically just like to "cut to the chase" as they say.
Is that possible, or am I doomed to download and install each beta (fighting the debacles of beta 2 all over again)?

this is not possible. Snow leopard Mail will not work with any other version of OS X. you need to install Snow leopard if you want to run it.

Original 10.4 Tiger install disc keeps ejecting

Hello,
I am trying to re-install my 2007 white MacBook to its original state so I can sell it. It currently has Lion installed, when I insert the original Apple 10.4 Tiger CD/DVD into the super drive the disc just keeps ejecting. All other discs work and the install disc does not eject from my MacMini.
Why is this happening?
How can I get Tiger installed on it from the original disc?
Many thanks in advance for any help provided.

When trying to boot with a disc, it's say that the disc isn't compatible with your machine. ( I thing strongly. )
After you start up the machine normally, can you insert the disc?
You can manually delete things. You might miss a few things but you should get most.
Robert
start by deleting your id:
Create new Account
blue apple > system preferences
clicks on accounts icon
click on lock icon if locked.
enter logon password
click on + icon ( left side of screen just above the lock icon )
after creating new account, you need to logout of your current account.
blue apple > log out ... current count name ...
log on to new account. see if problem goes away.
if it has gone away rename finder preference ( Not sure of name ) ... reboot.

I have upgraded to a new computer and Windows 8. I cannot install Photoshop 6 which was an upgrade version from Windows 5.5, 5, 5. The original 5 will not install and without it, the Photoshop 6 has no original version to load from.

How do I install Photoshop 6 on Windows 8., when my original Windows 5 will not install?

If you were actually talking about CS5.5 and an upgrade to CS6, you only need the serial numbers from both products. Adobe's installer will look for CS5.5 on your system and when it doesn't find it, you will be prompted to enter that qualifying product's serial number.
Nancy O.

Upgrading from 10.5.8 to Snow Leopard using retail install disk. Do I need to have my original serial numbers to install? I've lost them.

I have a 2008 iMac currently with 10.5.8 OS. I finally have given in and need to upgrade to Snow Leopard. I ordered the retail disc and just received it, but I thought there would be a new install serial number with the disc. However, there is nothing. I lost my original install serial numbers ages ago, so I'm wondering can i even install this new OS?

Go ahead. Unless you got a Mac OS X Server DVD, you won't be asked to provide a serial number at any point of the installation.
(123221)

Changing my Hard drive, but lost original Mac OS X install disk...

Hi,
I'm changing my almost saturated 160 gigs HD in my 2009 MacBook for a 500 gigs, but I lost the Mac OS X installation CD (still have the app CD, though...)
I'm currently running Snow Leopard 10.6.8
Some posts indicate I can bypass the original CD and use my Snow leopard CD, some other posts suggest ordering a new original CD from Apple...
I'm a bit confused with all the different answers....
Can someone point me in the right direction ?
Thanks in advance,
G

G-Houet wrote:
I'm basically equiped to proceed in changing out my HD and retreive all my data from Time Capsule ?
Oh, slightly different question...
If you were to ask if you can retrieve all your data from a disk connected directly to your Mac (USB or FireWire, for instance) the answer would be yes.
However, I am uncertain about the exact procedure for restoring from a Time Capsule. You can try this yourself before changing your hard disk though.
Start from your Snow Leopard DVD, and when the Mac OS X Utilities screen appears, choose "Restore from Time Machine backup". See if it finds your Time Capsule, and presents you with a list of backups from which to choose.
If so, cancel that restoration and exit, since you confirmed this will work. You can then proceed with your hard disk replacement with the confidence that you will be able to restore your previous system. In this case there is no need to install a new copy of OS X. Simply restore from your Time Machine backup instead.

Original CS will not install on 10.6.5

I hope I won't get scolded for asking this question, but I bought the education version of CS when I was in college. I have had my emac since 2004 and have since bought a new imac with version 10.6.5. on it. I tried to reinstall my Creative Suite (the original version) Yes it's THAT old...but it said I needed to install rosetta to run it. I clicked yes, and nothing happened after that. Is it impossible to run CS on my new computer? I bought the computer refurbished and I can't believe I would have to spend more on new programs than the computer cost me. I use the old photoshop and illustrator all the time for personal use. Is there any way I can get my disks to load on my new computer? Please help!! I am the one and ONLY owner of these disks.
Thanks!

Well I guess I have an answer to my question. I had to close all programs that were running on the computer. I tried to install it again. It installed until the end, it said I didn't have sufficient privileges to install. I changed my administrator password and tried again. It took FOREVER! A good 30 minutes, but it DID install. So I am a VERY happy Mac user once again. In time I will purchase the new programs, but until I can afford it, I am very happy I can still use my VERY OLD programs and run them on 10.6.5. Instead of deleting I just added this reply, just in case there was another one out there like me! LOL
Cheers!

My Epson Stylus SX535WD printer is not installing properly after Mavericks upgrade

Hi,
This morning - to my deep, deep regret - I uninstalled my Epson driver and associated software. I forget why I even did it now; I think it wasn't working very smoothly and I read on a forum it was wise to uninstall and reinstall if I have recently upgraded my operating software. I put Mavericks on back in February - and the printer/scanner has worked since then.
Anyway - I have spent the best part of the last 4 hours trying to reinstally the software - but now have no printers availabe as my constant error message. Epson advised me to install a 1.9Gb fix - which I have - and the latest epson software. But I can't find them on my laptop now. It is only when I click on Epson uninstall that I can see them sitting there - but with no indication of where they are on the computer. They aren't in downloads or applications... where else can i look? How else can I get this printer/scanner up and running again?
All tips VERY VERY VERY welcome. Thanks

Have you installed Apple's latest Epson drivers?
They are here:
http://support.apple.com/kb/DL1398

Just formatted my mac but iLife (from original disc) will not install

hi all!
I've done a routine format of my Macbook Pro 13" a couple of weeks ago, it all went well but I seem not to be able to install the bundled applications from the orignal, grey cd that came with my mac.
I insert the cd, start the procedure then just after keying in my admin password the insatllation stops...i.e. it fails to start.
As new, my machine runs OSX 10.6.6 but I've already upgraded to 6.8 ... I've tried to install iLife before and after upgrading.
I've been to an Apple Store — since my laptop is less than a year old — but they say warranty doesn't cover software...in any case, I've also tried to install an iPhoto downloaded from the internet, but with the same results, so I'm thinking it might not be a corrupt disc...
Any idea other than re-formatting the machine?
thanks!
dani

Erase and install 10.6 again, but this time use the Security Option > Zero All Data on the drive, you have bad sectors.
Reducing bad sectors effect on hard drives
How to erase and install Snow Leopard 10.6
If that doesn't work, then your cd is bad. clean it and try again or try extracting iLife using Pacifist. (but you need your bad sector issue resolved)
Also run through this list and get back with me, I doubt anything else is a problem on a fresh install, but there might be.
Step by Step to fix your Mac

FCS 2 upgrade- do you need the original prog to be installed?

I'm just about to take delivery of a brand spanking new Mac Pro, 3.2GHz etc (and very excited I am).
Planning to install FCS2 as an upgrade from my existing copy of FCP3. Will the FCS2 upgrade package require that FCP3 is installed on the machine already, or does the upgrade package simply require the licence number from the version that I'm upgrading from?

You don't need the older version installed ... just enter the serial number from the older version when prompted.
To expound on what Dvaid Lsater said, if you upgraded from FCP 3, it would not be legal to sell that version after upgrading from it.
-DH

Stylus original/RMX in LP8 install

Similar Messages

Maybe you are looking for