Stylus rmx/atmosphere gone after reloading tiger?

Hello,
I had to reinstall tiger for an unrelated problem, but when I open logic 7, and on the tracks where I used stylus rmx or atmosphere, the tab is x'ed out and it seems as though the link between logic and stylus is broken? Any suggestions?
im using tiger and logic 7 i believe.

Hi Manny,
try to make alias folders of both rmx and atmosphere and drag the alias to the new system,
search in the manual where to drop the alias.
Also, Spectrasonics forum may help you more in case you need it.
Cheers,
Jorge

Similar Messages

Can't open Stylus RMX in GB

I followed the instructions in the Spectrasonics Knowledge Base at
http://support.spectrasonics.net/viewtopic.php?t=150
and I can select Stylus RMX as a generator, but when I click on the pencil icon (to the right of "manual"), the Mac "bouncing ball" rotates for a while, but no RMX window opens. Also, the drop-down menu on "manual" only shows "Pres 0:Preset 0".
The problem is not just with RMX (v. 1.5.1c), but oddly, some Virtual Instruments load okay in GB and some don't. I think it may have something to do with how presets/libraries are loaded & handled in GB.
FM7, for instance, loads fine, but with no graphic interface, just a list of 127 presets. Tassman loads with the GUI but the top part is obscured by GB's menu bar. Albino & Lounge Lizard won't load at all, Absynth 3 loads with a User bank.
My RMX library has a lot of presets, so maybe that's too much for GB. RMX works fine in Logic, of course. I'd love to use it in GB, too!
Nigel
G5 Dual 2.5 /4.5 GB RAM Mac OS X (10.3.8)

I'm not sure about the size when it was open, only that the layered tiff is now 2.33GB. I've worked with larger files with more layers than this one and haven't had a problem. But then again, I used to save those as PSBs instead of tiffs. For no particular reason, I decided to try to save most files in tiff rather than psb where possible. I've never had a problem with larger PSBs.
I have an internal scratch disk with about 750GB of free space - it's not set up with a separate scratch partition though. Perhaps I should do that.
I just created a similar file that is 2.45GB when closed (according to the Finder info) and 3.11GB when opened (according to PS). After several closes/opens there seems to be no problem. When viewing the tiff file in TextEdit, the date is correct.
So at this point, I still can't open the 2.33GB file that seems to have had the wrong XMP data written, but I can open up a slightly larger file. I'm wondering if it is in fact just the EXIF data that's causing the problem. The progress bar while reading tiff format gets to about 60% before the error message appears.
I can open the file from Lightroom if I open it as a copy with LR adjustments applied, but that flattens the file. If all else fails I'll be able to work from there. Trying to avoid that since there were some layer elements I wanted to either remove or modify.
One other note: I did download some new brushes for this project and loaded them into PS. I've gone back and reset them to the default set in case there was some issue related to a corrupt abr file (just reaching here....); but the file still won't open.
Still hoping the layered file can be saved but am out of ideas.

Stylus RMX not working correctly.

I have been using this plug in on PPC machine with Logic Pro 8.0.1 before. After I upgraded my system to MBP, I open up this project, and Stylus RMX track won't play multi-channel regions. I don't mean the multi-output.
I have setup 5 channels and 5 tracks, all assigned to corresponding MIDI channels. The problem is that only the MIDI region on channel 1 plays, and it triggers all 5 channels! On top of that, if I mute the channel 1 track, rest of the track (2-5) won't trigger the sample at all. Another problem is that even though RMX is set to sliced beats, it plays the whole **** loop, as if it were on groove mode.
This is really annoying and the whole production is halted just because of this one plug-in error. Could someone please help me?
My system:
MBP 2.4G
4GB ram
Leopard 10.5.2
Logic Pro 8.0.1
Stylus 1.6.0
PS : everything worked just fine with my previous system.....

Hi G,
I suppose you have the last drivers (universal) for RMX?
What did spectrasonics say?
Jorge

SAPMMC All Settings Gone after running CCCleaner , How to get all settings

Hello All
SAPMMC All Settings Gone after running CCCleaner , How to get all settings back .
I donot know what is SID ( System ID ), Instance etc.
If this is not relevant to this forum plz let me know which forum ....
Regards
Rohit

Turns out those error messages it gave me were because it didn't sync properly and create a backup. Which is why when I restored from backup it didn't reload my old info. Instead of assuring me that I would have the option to restore my info, it would have been nice had it told me that a backup hadn't been completed and that restoring my phone without it would leave me with nothing.
Tech support had me use my old SIM card to import my old contacts. This worked, but I've entered contacts since getting the new phone that aren't on my old SIM. And doing so left me with a bunch of re-organizing to do (deleting, combining, entering First and Last name fields...) it took me several hours.
I didn't get my appointments back, cause my old phone was just a phone, and that info wasn't on the old SIM, but I'm REALLY glad I got my contacts.

Odd Multi-Channel Leakage with Stylus RMX...help please

Ok, so I've been to the Stylus site, I got the nice little pdf explanation of how to set up a Stylus as a multi-instrument, works like a charm, but then I went to set up my multi-channel set up so that I can add some Logic plugs to individual Stylus elements and heres what happens:
I have 4 elements going in one Stylus instrument, each has it's own track on the arrange now, but I want to get it to aux's so I've sent Djembe's which is the first element out B of the Stylus mixer which translates to Stylus RMX 3/4, no problems so far. Until I play back. When I play the Djembes back I notice this. That almost all of the Djembe slices are playing through Aux 1 (which is receiving B from Stylus as Stylus RMX 3/4), but not all of the slices, some in fact are still playing through the Audio Instrument track. This is not good, as it means I don't get the desired affect of being able to effect each element individually. Has this happened to anyone else, am I missing something blatantly obvious? Pointing me in the right direction would be greatly appreciated, as always, thanks in advance,
Graham
ps - the Djembe element was just an example this problem is occuring in all situations where I've tried to set up a multi-channel Stylus arrangment

Hi Jim,
you were 100% correct, I'd been fiddling with the edit groups while I was watching the video on edit groups to get a feel for it, and see how it works, it's an amazing tool.
However, here is another follow up question, it seems that although now I've gone through my settings and made sure that each element is sending to A, B, C or D respectively, the Aux's ie delay or flange, on appears on the original instrument track (out A). I've gone over and over this in the edit groups and they are all selected to send to B, C, or D only, but the effects seem to default to A and I can't figure out for the life of me where I can change that. Any ideas on this one. It works like a charm right now until I add stylus effects to the elements then it gets a bit messed up again. Any help would be greatly appreciated. Thanks, you get points for your last reply! Cheers,
Graham

Problem with stylus rmx and LE

hi folks!)
have since short time following problem:
when i take stylus rmx and collect a groove group, every thing is fine as long as i save in logic express, after saving rmx lost his connections to some grooves i have selected.
could someone give me a hand?
i also saved it as a new user "multi" in stylus, but also when i call this setting back i can't get the loops(sounds)
konfig: powerbook g4 1,67mac - osX10.4.6 - logic express 7.2
thxalot4yourhelp

Hey,
I believe there's an Universal update on that version you have, that can not be only for Intel, take a peak at Logic Pro Forum the guys have been posting on RMX yesterday.
Cheers,
Jorge

Stylus RMX - importing your own sounds?

After buying Stylus RMX I was disappointed to learn that I need ReCycle in order to import my own sounds/loops.
Does anybody know of a way to do this without using ReCycle?
Thanks.

recycle doesn't cost much and its the best way to convert all your samples
if you ask me its better than using apple loops utility to convert your audio to apple loops
pay a little for the best or use a free apple loops utility for a standard loops
stash
i guarantee you won't be disappointed

Stylus RMX and Logic Pro 9

Hi Everyone and forgive me for this ancient question but.. . .I have just spent an agonizing three days rebuilding my hard drive after the new Mac upgrade totally trahsed mine (and apparrently a lot of other people's as well). I'm not at home and therefore the restore disc is unavailable so I'm having to do it all by hand, so to speak.
Here's my question: Could someone walk me through setting up Stylus as a Multi-Timbral Instrument again? What's happening now is that, when I go to 'Create New Instrument/Multi-Timbral/8' I'm getting 8 tracks but they're all connected (i.e. you move one fader and they all move). Secondly, my old set up had MIDI tracks where (what seem to be) audio tracks are. I've tried to approach this from every possible angle, but still no luck. If I can't get MIDI tracks to appear on the Arrange Page, how can I insert the MIDI file from Stylus that I want to use?
OK, thanks for your help and please, do not, under any circumstances install the new upgrade!!! The forums are crammed with people who've had the same problem I had. Cheers, John

John Landi wrote:
Here's my question: Could someone walk me through setting up Stylus as a Multi-Timbral Instrument again?
John,
I'm just learning about RMX and Omnisphere and believe I ran across your answer while studying some tutorials. The screen shot below is from a RMX/Logic tutorial on Spectrasonics website: http://spectrasonics.net/products/stylusrmx-videos.php?p=4&f=&q=&InstrumentID=3& VideoTypeID=3 (it's an imbedded video towards the bottom of the page titled; Stylus RMX Tutorial RMX and Logic)
The video is based on Logic 7 and RMX 1.5, but still provide the basics for you to reset RMX as a Multi-Timbre instrument. Cheers!
Stylus RMX Tutorial
RMX and Logic

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. An

I recently moved all my logic audio sessions to a back up hard disk. Also updated to Loin OSX. My Stylus RMX is not working. I get a message Missing Element on Part 1...Currently not installed on their computer or has been moved to a different folder. Any help out there?

Hi
Sounds like you may have moved the RMX library folder?
Is RMX fully updated (for Lion)?
Check your hard drives for a file called SAGE:
It (or an alias of it) is normally found in the <USER>:Library:Application Support:Spectrasonics.
Note that on Lion, the <User> Library is 'hidden'... quickest way to get there is to hold down Option (Alt) whilst using the Finder:Go menu
CCT

My Disk Utility Is Gone After a Restore On My Mac.

My Disk Utility Is Gone After a Restore On My Mac.
How can i get it back?

First make sure it's really gone by looking in the Utilities folder. That folder opens when you press the key combination shift-command-U in the Finder. If it is gone, reinstall the OS.

I am unable to edit information I have typed into a spacebar, this includes backspace, and when I highlight it, even after reloading the page

I recently upgraded to Firefox 4 on my 3 yr old Macbook, though I am unsure if this is in fact connected. Now I am often unable to edit information I have typed into a search bar or text box (such as this one) even after reloading that page or pressing first the back, then the forward buttons. Has anyone else run into this, and does anyone know what is going on?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
Create a new profile as a test to check if your current profile is causing the problems.<br />
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

LMS 4.0.1 software distribution 3 out of 7 fail to pass traffic after reload

I've distributed (7) IOS C3560-ipbasek9-mz.150-1.SE2.bin upgrades on identical 3560G PS-S platform using LMS 4.0.1. All jobs come back successfully completed with the /MD5 hash matching exactly what Cisco has on their website. All devices have sufficient 32MB worth of Flash and verified enough was available prior to distribution.
Issue: After reload 2 of these 3560G devices would not pass traffic. Also, neighboring devices could see these devices through "show cdp neighbors detail" but the management IP was not being displayed. After consoling into these devices via (console port) the management IP address was there but was unable to ping this address locally and neighboring devices were unable to be pinged as well. Performed the "sh run" command and verified the config was correct.
***Cisco's engineers suggestion was to load a lower IOS.***
***I've perused the caveats with this release and have not found any solutions.***
I've already replaced the offending switches with new devices but don't want to keep upgrading with this many failures after reloading.

Your devices with the NX-OS versions you indicate should be OK per the LMS 4.0.1 Supported Devices Table.
Have you updated your LMS with the latest device packages? See the procedure here.

Multicast VPN Extranet Support doesn't work after reload

Hi!
We have Cat6500 with configured Multicast VPN Extranet Support feature. After reload of the 6500 customers in the receive MVPN cannot get mcast stream. We connect test device into source MVPN on that 6500 - everything is OK, mcast stream is available.
Workaround is "no mls ip multicast/mls ip multicast". After these commands mcast in the receive MVPN works fine.
IOS 12.2 SXJ2
Looks like a bug. We have several Cat6500 but only two of them have this issue.
Does anybody faced with such trouble?

Hi!
We have Cat6500 with configured Multicast VPN Extranet Support feature. After reload of the 6500 customers in the receive MVPN cannot get mcast stream. We connect test device into source MVPN on that 6500 - everything is OK, mcast stream is available.
Workaround is "no mls ip multicast/mls ip multicast". After these commands mcast in the receive MVPN works fine.
IOS 12.2 SXJ2
Looks like a bug. We have several Cat6500 but only two of them have this issue.
Does anybody faced with such trouble?

10000: PPPoE session recovery after reload

Hi.
We have seen that there are a feature that recover the PPPoE sessions closed in one side and up in the other. This feature is called 'PPPoE Session Recovery After Reload '.
In the feature navigator, we can see that this feature is available for 7200 series. It seems not available for 10000.
But in the release notes of Cisco IOS 12.3(7)XI3,
http://www.cisco.com/en/US/partner/products/hw/routers/ps133/prod_release_note09186a008040929e.html
appears this bug as resolved:
CSCsa46626
PPP PADT messages are not sent by a PPPoX PTA router to a client when the PPPoX user is no longer connected to the PPPoX PTA router.
This feature is enabled only within the BBA Group configuration using:
bba-group pppoe pppoe1
sessions auto cleanup
This issue can occur when a Cisco 10000 Series router is used as a PPPoX PTA router, and there has been a network flap causing the PPPoX users to lose their connections. PPPoE will experience this issue when BBA Groups are in use. VPDN Group configuration does not support this feature.
There are no known workarounds.
We have tested the IOS 12.3(7)XI6, but the router (10000) doesn't send the PADT (auto cleanup). In 7200, it works correctly.
Anyone have has this problem?
Anyone can confirm if this feature is supported?
Regards.
Jose

Hi Jose ,
I checked it using feature navigator and noticed that cisco 10000 doesn't support ""PPPoE Session Recovery After Reload"" feature.
The following platforms support the feature.
1700
1800
2600
2800
3200
3600
3700
3800
7200
7301
7400
Thanks,
satish

All bought titles and albums gone after upgrading I Tunes

Hi Guys,
unfortunately all my recently bought titles and albums from the I Tunes store are gone after upgrading to 10.7.0.21
Can somebody please help me?
Thanks you very much...
Best regards - Greg

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Stylus rmx/atmosphere gone after reloading tiger?

Similar Messages

Maybe you are looking for