SU01 change password ECC 6.0

We are ugrading from 4.7 to ECC 6.0. In ECC 6.0 the administrator's password reset through SU01 does not allow to check the green arrow to accept the changed password - no response when clicking the green check.
Reset has to been done inside the user master record (logon data) - any thoughts ?
SAP_ABA     700     17     SAPKA70017     Cross-Application Component
SAP_BASIS     700     17     SAPKB70017     SAP Basis Component
ST-PI     2008_1_700     0          -     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     17     SAPKIPYJ7H     PI_BASIS 2005_1_700
SAP_BW     700     19     SAPKW70019     SAP NetWeaver BI 7.0
SAP_AP     700     14     SAPKNA7014     SAP Application Platform
SAP_APPL     603     3     SAPKH60303     Logistics and Accounting
SAP_HR     600     22     SAPKE60022     Human Resources

See the solution:
su01 change password does not work Initial password (set by administrator)
Tks
Marcelo Venancio

Similar Messages

Reset the Password: No authorisation to SU01 Change mode.

Hi All,
I do not have the authorization to the change mode of SU01 transaction.
Could any one please tell the procedure to re-set the password to "Initial123" for a user-id.
I am in ECC 6.0 system
Thanks & Regards,
Goutham.

If you are not authorized then you are probably the wrong person to change the password of another user.
Seems as if your security is well organized, so go to your help desk or system adminstration.
If you want to change the password for your own user klick on change password on the logon screen.
HTH, Rudi

How to restrict changing password for user ?

Hi All experts ,
We have created users . Users should not change their password without permission of Administrator . How to restrict them by setting Permissions / Authorizations ?
Thanks.
KISHORE SATPUTE

Hi,
In "USER MAINTENANCE- SU01" --> in the "logon tab" there are 5 different "user type"
1. dialog
2. system
3. communication
4. service
5. reference
Kindly mention the function and role of all the above mentioned user types specifically and hows is one user type different from another.
These are as follows:-
1. Dialogue:-
For this kind of users:-
GUI login is possible.
Initial password and expiration of passowrd are checked.
Multi GUI logins are checked.
Usage:- These are used for GUI logins.
2. System
For this kind of users:-
GUI login is not possible.
Initial password and expiration of passowrd are not checked.
Usage:- These are used for internal use in system like background jobs.
3. Communication
For this kind of users:-
GUI login is not possible.
Users are allowed to change password through some software in middle tier.
Usage:- These are used for login to system through external systems like web application
4. Service
For this kind of users:-
GUI login is possible.
Initial password and expiration of passowrd are not checked.
Multiple logins are allowed.
Users are not allowed to change the password. Only admin can change the password
Usage:- These are used for anonymous users. This type of users should be given minimum authorization.
5. Reference
For this kind of users:-
GUI login is not ible.
Initial password and expiration of passowrd are not checked.
Usage:- These are special kind of users which are used to give authorization to other users.
Rewads point if helpful
Thanks
Pankaj Kumar

How to Change Password throgh ABAP

Hi All,
Could you please tell me How to change password Through SU01 without having role.
When i am going to click change password button it giving error message you are not authorize to change password.
How to change through Debug mode.
Regards,
Arif

Hi,
Firstly ,you are not supposed to do something that you are not authorised to do.
But still you need access by bypassing the Authorization then here is the way.
Create a Breakpoint in FM RS_TRANSACTION_TEST at line no - 34 .
1.Go to tcode SE93.
2,Enter Tcode as 'SU01'
3.start the debugger by putting '/h' in the command line and then execute.
4.You debugger will stop at line no 34 of FM RS_TRANSACTION_TEST.
5.the value of sy-subrc will be '4' at that point...CHnage the value of su-subrc to '0'. and then execute.
OR use FM - BAPI_USER_CHANGE
Regards,
Vikas

How to change password in ESS

Hi all,
Is there any facility to change password in ESS?
Or this facility is available in HRUSER transaction ?
Thanks & regard,
Sameer

Hi,
Pls check in ESS screen itself, whether u have the option to change ur password.If u don't have then SU01 is the transaction code through which u can reset ur password. T
his SU01 authorization will be HR administrators. So ask the HR administrator to reset the password if it is locked.
Priya
<b>REMINDER : POINTS SHOULD BE GIVEN ON ANSWERS<b></b></b>
Message was edited by:
Priyadarsini Selvaraj

If someone has wiped my ipad and changed passwords on icloud how do i get my data back

if someone has wiped my ipad and changed passwords on icloud how do i get my data back? please could someone help me out thanks

How did they wipe it? By using Find My iPad and performing a wipe? If so, that means they have your icloud ID and password, not a good thing.
You could try connecting it to iTunes and performing a restore from iCloud. But if they changed password, then you are out of the loop. How did they get your password in order to change it?

How to Enforce User Change Password First Time User in Release 2?

Hi...
We discovered in Oracle Directory Manager(in unix is oidadmin), there actualy
column to expiry date.(the default is 60).
We follow this notes in metalink..
Note:176470.1 Subject: How To Pre-Expire Portal Passwords
Even though the note is for Portal30(release1), we just wangt to try it in our Release 2...
Extract from the note
"3. Set the value of the column LAST_PASSWD_CHANGE_TIME in the table WWSEC_PERSON$ in SSO schema to a value older than the password expiration period (default is 90 days) before the current time (e.g. sysdate - 100) for the appropriate user(s)
4. For example, if you have created a user called TEST
you would issue a command such as:
update wwsec_person$
set LAST_PASSWD_CHANGE_TIME =sysdate-70
where USER_NAME='TEST';
commit; "
But, when we try to login again in the portal, we can still login...
So, is the function still exist in Release 2?..
If not, why Oracle Portal throw that function away?
Why there still columns in WWSEC_PERSON$ that maybe linked to the password problem?
can anybody help/explain?
Thanks....

Rather than rehash what has already been thoroughly discussed, check this thread. This should answer your question.
Can a user change his own password after admin has set it
The english version of Jose Troya's blog: http://obiee101.blogspot.com/2008/08/obiee-change-password.html
Edited by: LC143 on Aug 27, 2008 1:36 PM

In Portal Anonymous mode - Change password option not coming- login fails

Hi Experts,
We are having some application which requires login in anonymous mode. When we click the application and give the user id password, it loggs in properly, there is no problem in that.
But if the password is reset by administrator, then when entering the reset password given by admin it should ask to change the password. This is happening in normal scenario(/irj/portal), but when try the same in anonymous mode(irj/portal/anonymous) where the prompt is from the login required application, then it says login failed instead of giving the change password and confirm password screen.
Appreciate your help in solving this issue. I hope many would have faced similar situation.
Thanks
Yusuf

Hi Yusuf.
Do you use a standard or custom login module for your application?
More likely the used login module does not have a logic that handles such scenario as a change of user's password.
In this case you need to implement a custom module with a required functionality.
Best regards,
Aliaksandr Zhukau

User cannot change password option is automatically getting unchecked while giving domain admin rights

user cannot change password option is automatically getting unchecked while giving domain admin rights

Greetings!
"Domain Admins" falls into the category of protected groups and it is included in ADminSDHolder process. It is normal and was designed in order to prevent the modification to these privileged groups. More information on the link below:
AdminSDHolder, Protected Groups and SDPROP
Regards.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

PO Changes from ECC to SRM 7.0 using PurchaseOrderChangedInformation_Out

Hello,
I am having an issue with sending PO changes made in ECC to SRM. When a PO is changed in ECC, I see an XML message with the sender interface name of PurchaseOrderChangedInformation_Out in namespace http://sap.com/xi/APPL/Global2 being created in ECC in SXI_MONITOR.
However this fails in XI because there is no configuration (receiver determination) in XI to handle this sender interface. I have setup the SAP supplied SE_Services_Procurement scenario in XI.
We are on XI 7.0 and SRM 7.0
Has anyone faced this issue before ? Are PO changes handled through PurchaseOrderChangedInformation_Out ? For PO creates I see a PurchaseOrderERPRequest_Out_V1 message being created in ECC and this is indeed transferred to SRM
Thanks
Anil

Dear Anil,
About SRM7.0 and XI please see url:http://esoadocu.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE4157EA06BD7BF1A3C7001A64D3F462&id=C66D0901602211DA36BB000F20DAC9EF

Changes in ECC 6.0 from 4.6

Hi Experts,
Can you give me some ideas on what are the changes in ECC 6.0 from the following SAP Transactions, Many Thanks
General ledger     FI
- post document with different document types     FI     "
FB50"
- display document     FI     FB03
- reverse document     FI     FB08
- print document     FI     F.62
- display/change line items     FI     FBL3N
- display balancies     FI     FS10N
- clear account     FI     F-03
reporting     FI
- P/L+B/S     FI     S_ARL_87012284
- document journal     FI     S_ALR_87012287
- general ledger     FI     S_ALR_87012282
Closing     FI
- valuation AP and AR     FI     F.05
- valuation G/L     FI     F.05
- valuation bank accounts     FI     F.05
Others     FI
- standard analysis     SD     MCSI
- creating order     CO     KO01
Master records
- creating account in chart of account     FI     FSP0
- creating account in company code     FI     FSS0
- edit financial statement     FI     OB58/FSE2
- exchange rates     FI     S_BCE_68000174
- open and close period     FI     S_ARL_87003642
Accounts payable     FI
- create vendor     FI     FK01
- document entry/fast entry     FI     FB10
- post/delete invoice     FI     FBV0
- vendor display/change line items     FI     FBL1N
- payment run dom/foreign test also with bank     FI     F110
- post manual outgoing payment     FI     F-53
- post manual incoming payment     FI     F-52
Reporting     FI
Accounts receivables
- change customer master data     FI     XD02
- post invoice     FI     FB70
- customer display/change line items     FI     FBL5N
- post manual incoming payment     FI     F-28
- dunning run     FI     F150
Reporting     FI
- open items     FI     F.27
- account statement     FI     F.27
- customer line items     FI

Dear Jaffer,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

Unable to change password while first logon on windows server 2008 R2 SP1 system

Hi Team,
Ad team has created new account for me with change password on first logon setting
When I logged in on Windows Server 2008 r2 SP1 system with my new credentials I get a error message stating that
"You must change your password before logging on the first time. For assistance, conatct your system administrator or technical support"
Concern:
I do not get password change screen on first logon on the server. How should I change my password on first logon?

Hi,
I got resolution for above issue
Run ==> type "tsconfig.msc" ==> double click "RDP-TCP" ==> change security layer to
RDP Security layer ==> Apply ==> OK

HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

settings - app/iTunes store - sign out and sign back in with your new id.
Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
You can't merge apple id.

How to trigger and change password for AD user after form based login

Hello,
We are authenticating against Active Directory with Weblogic 10.3 using FORM based security. Everything is working. I need to now change a password for an authenticated user. For example, I have set a user to have their password expire on next logon from the AD side. The user logs in but somehow I need to trap some info from Active Directory (or an LDAP conversation) to figure out if I need to force the user to change password.
Do I need to start looking at custom code with LDAP Java SDK's or can I use a canned MBean from Weblogic Server.
I am looking at http://www.mozilla.org/directory/ for LDAP.
Can I set/reset an AD user's password with an MBean like the following link?
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/javadocs/index.html?weblogic/management/security/authentication/UserPasswordEditorMBean.html
If anyone has any experience with this or can point me in the right direction let me know.
If anyone else is interested please add to the tread and I'll be sure to keep the found solution(s) updated here.
Thanks...........
JJ Everett

Hello JJ
Please see document ID 403484.1 in http://metalink.oracle.com. This may help to understand what you are aiming to do. Cheers
-- Nathan

How to allow users to change password

I have enabled users to change their passwords in the Server.app for the Default Site with SSL, and who can access is a group of individuals.
When I load up the Server site, I am presented with
a Login to which I then add my username and password and I am then presented with
Welcome to OS X Server
OS X Server makes it easier than ever for the people in your organization to collaborate, communicate, and share information.
I Choose My Settings and the site is redirected to /changepassword of which a page comes
Forbidden
You don't have permission to access /auth/ on this server.
The Directory /Library/Server/Web/Data/Sites/Default/auth/ exists with the corret permissions. This is an empty directoy tho
Apache Logs:
Directory index forbidden by Options directive: /Library/Server/Web/Data/Sites/Default/auth/
I cannot get this to work. WIki's are turned on but that doesnt work either.
If I Launch /wiki, I am prompted to login, to with I do, and i just get a blank web page
Apache logs:
File does not exist: /Library/Server/Web/Data/Sites/Default/__collabd
This is on a new install of OSX server
Any Suggestions?

Hi,
On the landing page at the bottom it should say "change password".
That brings you to a forbidden page?
On my server I do not have the /auth/ folder in my default site, but my changepassword page does work.
Can you check if going to https://127.0.0.1/changepassword does work? It will give an SSL error.
Then it might be DNS related conflicting with another router/server in your network
Or... charge $ 5 per user to change his or her password personally
Goodluck!
Jeffrey
StarPine Support

SU01 change password ECC 6.0

Similar Messages

Maybe you are looking for