Sub Category Field

Dear All,
I need to sub divided my categories into Sub Category. I am planning to change the Subject Field into Sub Category Field and mainatain the sub category entries via Code and Code group.
I need to know some details
a. whether this subject field in used any where else.
b. Shall i create a new field and instead of changing the Subject Field. But I have 1 constraint in creating new field as this new field wil not reflect in the standard crm_dno_monitor report.
Please suggest the best solution.
Raj

Hi,
Better create a new Sub Profile & Code Group and assign it to your Txn Type.
Also, you can use this code groups in your CRM_DNO_MONITOR report.
Thx,
Waseem.

Similar Messages

OrgChart 3.0 SP1 - Sub Category Groups configuration?

According to the Admin Guide the Sub Category Groups configuration in Admin Console would allow me to group similar records within the same org chart box. I assume the Sub Category Filter will define the criteria for sorting the records but there is no description / example/ guidance on what the syntax should be for this field. 2 different results I would like to achieve are:
(1) to list names of multiple incumbents for one position in a box, rather than simply showing the phrase "multiple incumbents".
(2) to hide the whole group of multiple incumbents for a position, based on the Employee Group.
Any assistance appreciated.
Thanks,
Clementine

Hi Clementine,
I would suggest that you apply a filter to the data element. You can do this in the AdminConsole via OrgChart > Positions > Data Connection (that is "Positions" directly under "Organization Structure"). Add a filter, such as:
where EmpGrp != '9'
You can also do this for the Employees hierarchy too ( OrgChart > Employees > Data Connection ).
Please note that the field for exclusion must be a hierarchy field, i.e. it must exst in the list of Fields under OrgChart > Positions > Fields. You may have to change the data element configuration file in order to achieve this.
Best regards,
Luke

Web app: How can I make a web app input form post directly to a sub category

Please, how can I go about this? Some of the ideas coming to my head is to replace the section I require with the generated webapp input form code with this:
<input type="radio" name="CAT_Category" value="{module_category, ID} onclick="javascript: return false;" >2013 /> // Not tested because am not sure of the markup
Am I on point ? Or is there any other way I can get this done.

I Trickster, pardon me if am not clear enough. But this is it. I have many BC Categories setup for different web apps. If you use the module {module_categorylist} only. BC will populate all the categories on the BC site, instead of a specific category relevant to the web app. If it is {module_categorylist, categoryID}, you are telling BC to use the the categories in a specific category.
When you say that you want to assign a web app item to a sub-category... do you mean the built in BC categories . I want to do this via the web app input form not through the admin.
Do you have a top-level category that contains all the relevant sub categories that the user could use to classify/categorize the web app item upon submission? Yea I have a top category that the user could use. It is this top-level category ID, I have used with the categorylist module.
If you don't want the user to choose the sub-category themselves, how do you plan to derive the sub-category anyway? Thanks again Trickster. You have provided the solution to that with the hidden input field code you shared earlier. The sub-category has been pre setup as usual in BC and the sub-category ID would be used as you instructed in the code. This is intended for another web app that won't require users selecting a category. This is the example you shared:
<input type="hidden" name="CAT_Category" value="my category ID"/>
Using my example above I was able to test and have it working (using {module_categorylist} with the SELECT element) on a web app input form and when I submitted the new web app item it was classified in the category I chose. Yes Trickster, it works for me too that way. the web app item was classified perfectly, but if you go to your the web app item submitted at the admin-end, you will discover in that the category the user selected in the front-end is not selected, even though the item was classified
I have highlighted it here: http://screencast.com/t/dwiXzBFXp
The option selected by the user is not captured. It often defaults to the 2012, even when the user selected 2013 and the item has been classified as 2013.
I hope am more clearer. Thanks for all the effort.

For Z Po order type - Item category field is greyed out.

Hi MM Experts,
I am an ABAper working on PO creation with respect to PR( PR with account assignment N) for Z order type . The requirement includes to update item category of PO with B , But for this Z order type both PO transaction Create/Change(ME21/ME22) the field item category has been greyed out ( Non editable). I checked the SPRO setting for this order type ( SPRO-MM->Purchasing-PO->Define Screenlayout at document level .The field item category has been made as optional.
Please let me know why this field ( item category still showing in display mode) and How to make it as editable .I need it as editable in ME22 to implement the new requirement of updating that field with item ategory B.
Thanks in Advance
Pravee.

Hi All,
Since I was creating a PO with respect to PR - after running through all the screens the item category field was becoming non editable, But during the create in one of screen the field item category was still editable, so I updated the item category with B during the create and created the PO, I have used BDC to do the same and its working fine. Thanks for all your inputs.
Thanks
Pravee.

Risk category field is missing in dso for 0fiar_o09 credit management.

Hi BI Experts,
I am using the standard extractor for the credit management dso 0fiar_o09. The field for risk category originates from our R3 system in table knkk-ctplc. It displays correctly in the psa. The transformation rsds 0fi_ar_9 maps it to 0risk_categ. It appears as an infoObject in the infoSource. The trcs transformation maps the rule also.
However, when I try to display the data in the dso, the risk category field does not display at all.
Please help with any possible suggestions to display the missing field.
Kind regards,
Cheryl Adamonis

I resolved this issue by removing the check in the 'attribute only' selection on the general tab of the infoObject.

Hide grand total field on ALV report, But keep the sub total fields

Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document.

Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document.

AFS Elementary Field Extraction (Category Fields)

Hello Guru's,
I have a problem of extracting category fields. The problem is in the mapping of Characteristics (Category) to the Elementary fields in the R3 AFS BW interface. For an example if you take the category characteristic 'Quality" it has two elementary fields,
Stock(J_3ABWEL_QUAL ) & Requirement(J_3ABWEL_QUAL_R). But the problem in R3 is, there is only ONE Characteristic available for "Quality". In the AFS BW interface it is not possible to map one Characteristic into two Elementary Fields.
Please let me know how to handle this.
Any thoughts will be greatly appreciated.
Thanks
RJ

Hi AFS Gurus,
Could you please help me out?
Cheers,
DM

Sorting of Sum Totals at category & sub category levels in Answers

I have a requirement where i need to sort by $$ within a category and sub category, first i need to show the highest YTD $$ under the category with total & the sub categories also should be sort as given in the example, GM having the highest value is in top, in the same way AT&T having the highest value is at the top.
Category Sub Category YTD $$ by S
Automobile GM 12000
Toyota 10000
Honda 8000
Automobile Total 30000
Telecom AT&T 10000
Verizon 8000
Sprint 5000
Telecom Total 23000
I am able to achieve this if i do it at the Category level, and the sub category is sorted in alphabetical order and not by YTD $$ and the moment i add the sorting to the Sub category, it shows category & the sub category totals as individual line items instead of single category & multiple sub-categories .
Thanks again for your time & help!!

Thanks for the response, i can only select a value from the dimension if i select Sort Order, but the YTD value is from the fact. Let me try to show the requirement here again as in the last mail somehow the format was not correct. The text in bold refers to the Category & the text in italics refers to the sub category.
Category Sub Category YTD $$ by S
Automobile GM 12000
Toyota 10000
Honda 8000
Automobile Total 30000
Telecom AT&T 10000
Verizon 8000
Sprint 5000
Telecom Total 23000
The category with the largest total should be at the top and within the category, the sub category with the max $$ should be at the top.

How to Add Values in INVOICE SUB-TYPE field at the Invoice Header Forms

Hello,
Does any body knows how could I add/modify values in the INVOICE SUB-TYPE field at the Invoice Header Forms?. This values are related to the Globalization, in this case for the Chilean Localizations.
Thanks,
Alejandro R.

It gives any error or just does nothing?
Have you tried making another simple form with just one block and one or two items?
You can do this type of testing in these conditions.
Which version of forms are you using?

How to create the sub type field in hr abap infotype

hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.

Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan

SharePoint 2010 View Group By Category and Sub-Category

I have a document Library with Category and Sub-Category columns. In the view I am grouping by Category and then Sub-Category. However, most of the documents do not have a Sub-Category. My desired result would be that the document would appear underneath
the Category. However, if no Sub-Category is assigned then SP creates a generic Sub-Category and puts the document there. It should look something like this:
Category : Main Category
Document-1
Document-2
Sub-Category : Sub Category
    -Document-3
    -Document-4
Instead it is Creating a generic SubCategory:
Category : Main Category
Sub-Category : (1)
    -Document-1
    -Document-2
Sub-Category : Sub Category
    -Document-3
    -Document-4

Hi，
Per my knowledge, when you set group by Category and then Sub-Category, it should looks like the following:
Category : Main Category
Sub-Category : (2)
    -Document-1
    -Document-2
Sub-Category : Sub Category
    -Document-3
    -Document-4
I think there is no OOTB method that could make it looks like the following:
Category : Main Category
Document-1
Document-2
Sub-Category : Sub Category
    -Document-3
    -Document-4
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to create Sub- Category tags in PSE 12?

I want to be able to create Sub- Category tags in PSE 12 without using the map view. I have tags United States with sub- categories South Carolina and Charleston. I had no problem doing this in PSE11.

I found a very convoluted solution to creating a Places sub-category keytag in PSE12. First I created a new tag by placing an image on a map (using search). The resulting tag created a specfic location such as a street address. I then renamed the new tag with city name. The renamed tag can then be applied to all other desired and selected images. This is much more difficult than in PSE 11. Is there an easier way?

What is "Category" field for?

In the iTunes List View, you can change or enter info for most columns for a song, for example the name column, by simply clicking in that column. The insertion point appears and you can type or change the name of an item. However, this doesn't happen for the Category field. If you click it, no insertion point appears. Plus, the Category field doesn't appear in the "Get Info" window.
What is this Category field for?

I believe Category is mainly used for Podcast tagging where the author of podcasts can categorize the type of podcast. For example, Cartoon, Music, Comedy, Spoken Word, or whatever categories you normally see for podcasts in the Apple Store.
If you have podcasts, go to the podcasts and turn on the Category header to see what I mean.
Patrick

What is the Category field for and how do I edit it?

In the iTunes music list, there is a category field. However, I do not see it in the get info window. Not surprisingly, although the category field shows in my iTunes music list, none of my songs have anything entered for the category. What is this field for and how do I edit it? Thanks.

The only items I have that show a category are some iTunes U downloads.
You can see a list of iTunes U category and subcategory codes and associated names here: http://deimos.apple.com/rsrc/doc/iTunesUAdministrationGuide/iTunesUintheiTunesSt ore/chapter13_section3.html

SQL query to list the "Administrative category" field for all applications

yesterday i started a thread to list the "Optional reference" field for all cm applications in a SSRS report. I've got the query with the help of Torsten.
https://social.technet.microsoft.com/Forums/en-US/00419e6e-e3c2-4b80-b6af-2a24ced1032d/sql-query-to-list-the-optional-reference-field-of-all-packages-in-cm-2012?forum=configmanagersdk
But again today, i'm looking for a way to get "Administrative category" field in a SSRS report. Could someone point me to the right direction ?
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Hi,
You could monitor the SMSProv.log when you check the category of an application. It shows that SQL query the SCCM provider used is related to function fn_ListCategoryInstances.
Best Regards,
Joyce

Sub Category Field

Similar Messages

Maybe you are looking for