Sub domains not working? help

I recently got my server going with the dns being
server.domain.ca
I have domain.ca as primary zone
server.domain.ca as Machine with IP 10.0.1.14
gallery.domain.ca as Machine with IP 10.0.1.14
I also have both domain.ca and server.domain.ca as a service (SRV) for http port 80
I have added both to Web>Sites and left the folder destination etc in default, all seems to be working well with those names and server.domain.ca is hosting my calendars (although domain.ca goes there as well??)
Anyway Im trying to add gallery.domain.ca to Web>Sites
I added it to DNS as gallery.domain.ca machine and IP 10.0.1.15 and at times to 10.0.1.14 to see if its been working. It shows the default wiki etc but I assume this is wrong
I have changed the Web folder path and no go just the default wiki.
All site in Web>Sites are astrix not IP's
What im trying to do is get gallery.domain.ca with its own folder and use WebDav for images and permissions
What am I doing wrong for it to not even see the new folder?
Where I have the domain name registered I have
A record fo domain.ca pointing to my static IP
A record for gallery to my static IP
A record for server to my static IP
And a CNAME for www pointing to domain.ca
Im stuck I can't figure why gallery.domian.ca wont work on its own folder

I would suggest to start with a simple configuration and just have the two sites server.domain.ca and gallery.domain.ca on the same ip address. Then be sure the Web Server Alias does not contain a dot, I used the Host Name here too.
So your DNS server and web server are running on the same server?. When you type http://apple.com in your browser your answered by http://WWW.apple.com but is this handled by the DNS or webserver? Do you want a response from www.domain.ca or just domain.ca?

Similar Messages

  • After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • When i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    It all depends on the codec the file uses, Karli.
    What model of camcorder is this video coming from?
    Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
    BY THE WAY, KARLI--
    PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

  • My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    See this article:
    http://support.apple.com/kb/ht3964
    Find the section that applies to your computer, and follow the instructions.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • I cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please

    i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
    i updated my ipad in ios 6

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • Lower volume button control not working help?

    Lower volume button control not working help?

    If you only restored from backup, restore to factory defaults/new iPod.  If you then still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HP pavilion dv6 microphone not working . help please . . .

    HP pavilion dv6 microphone not working . help please . . .

    Hi,
    DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
       http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
    You may wat to try this first:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • After update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • On my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!

    on my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!

    Could you please describe how you are trying to delete a single text message and it will not work? What are you seeing in place of the trash can icon?

  • HT201210 I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

    Hello

    I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

  • TS2755 When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please

    When trying to open my mail, it opens then closes immediately, I've deleted the account and re-created it 3 times and also done a reset but still not working, help please

    Try closing all apps in Multitask Window
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe up on the screenshot of the app you want to exit.
    3. The app will fly off the screen

  • My iphone is not working HELP !!

    My iphone is not working HELP !!!!!!!!!!!?
    my iPhone is black and it's so hot !! and i cant open it am trying with the Home and lock button and still not working and it's very hot and it's out of the charger right now ... and still hot i tried everything not working ? ?can someone tell me what to do please
    now it's not cold at all !! it was so hot !! i plugged back to the charger and it's not working ! and i tried the BUTTON HOME and LOCK not working ?? ?any ideas ??

    Let it cool of for a while , While not charging it,  then try after while plugging it into the computer you normally use itunes with and see if itunes will recognize the phone.

  • Urgent: OSB FTP polling is not working, help!!!

    hi all,
    I am doing an onsite poc on customer site, and configuring and proxy service on OSB(11.1.1.5) using ftp , but it just not working, not picking files in the specified folder, no error message. seems it can connect and login, but just not picking the files, though I set the mask to *.*, poll interval 3 seconds. any tricky? someone can help?
    I've read all the documents abt ftp transport, and I can configure file proxy, ftp business service successfully.
    thank you very much in advanced.

    no log still, for DEBUG.
    error will throw in log only if I set the wrong user/password.
    seems it connected to the ftp server, but just not picking the files there. I don't know why. I doubted it's the problem of the path setting, but it's the same for phsical path and relative path. not working.
    help...........

  • SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

    SOMEONE PLEASE HELP ME THIS IS MY FIRST TIME DOING THIS MY IPOD IS DISABLED AND IT SAID CONNECT TO I TUNES I DID THAT AND ITS NOT WORKING HELP ME PLEASE AND THANK U

    Please turn off your caps lock.
    See http://support.apple.com/kb/HT1212.

Maybe you are looking for

  • How do I delete an iBook purchase from my account?

    I need to delete a purchased iBook which is not suitable for my children to read. How do I do it?

  • How to determine host status in a task via python api

    Hello all, using the python api I am having some issues trying to determine the status of a host within a task. For example I have a job, with one task and 10 hosts associated with that task. Eight hosts finish the task, 2 fail. However via the api I

  • Query: Accessing super class

    hi friends , i have a small doubt on accessing super class using super keyword. does the use of super as super(super(super(i))); work properly and what would be the result. kindly guide me.......... jay

  • Budgeting and PCP

    Hello all In the configuration of CM , what are the main aspects to be looked at other than Compensation Adminsitration in SPRO. BUdgeting is a must , I know. What abt PCP ? Can we go ahead and CM without PCP. We have already done the job pricing and

  • IPad is constantly connected to wireless and using up all my download limit

    My iPad is the only wireless device I have running and even when its turned off its still connecting to my wireless broadband. Its used up 5gb in less than two days!!! The only thing I can do to stop it is to put the iPad into flight mode or disable