Sub node is not getting created

Hi Experts
I have IDOC to SOAP scenario, here the subnode is not getting created in the main node. please help me
Structure is given below
Source
Matmas
      IDOC
          e1m -
(1...9999 ) occurance
Target
Target
XMLDATA  --- (1.. UNBOUNDED)
     SUBNODE1 ---(1.1)
          SUBNODE2 ---(1.)  -- UNDER SUBNODE1
          SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
Quesion 1.
now i want XMLDATA node to be repeated as many times as e1m comes from source along with both the subnodes 2 and 3 at target side.
but i could see only subnode2 is getting created not the subnode3 while testing.
May i know why is this happening.
I want the SUBNODE3 also be created.
Note the occurance of SUBNODE3  is 0.. unbounded
Question 2:
I want the SUBNODE3 also to be repeated as many times as e1m node comes from source.
For example:
e1m comes twice then the target should be as below
XMLDATA  --- (1.. UNBOUNDED)    
SUBNODE1 ---(1.1)
          SUBNODE2 ---(1.)  -- UNDER SUBNODE1
          SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
XMLDATA  --- (1.. UNBOUNDED)    
SUBNODE1 ---(1.1)
          SUBNODE2 ---(1.)  -- UNDER SUBNODE1
          SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
SUBNODE3----(0...UNBOUNDED) -- UNDER SUBNODE1.
Regards
Lara

Please see the below logic:
E1MARAM --> XMLNODE
E1MARAM --> useOneAsMany_customUDF -->SUBNODE3
E1MARAM/MATNR -->  useOneAsMany_customUDF --> SUBNODE3/MATNR
E1MARAM/xyzfield -->  useOneAsMany_customUDF --> SUBNODE3/xyzfield
Source:
<?xml version="1.0" encoding="UTF-8"?>
<MATMAS05>
   <IDOC>
      <E1MARAM>
         <MATNR>123</MATNR>
      </E1MARAM>
      <E1MARAM>
         <MATNR>1234</MATNR>
      </E1MARAM>
   </IDOC>
</MATMAS05>
Target
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Test xmlns:ns0="urn:test-2:test:area">
   <XMLDATA>
      <SUBNODE1>
         <SUBNODE2/>
         <SUBNODE3>
            <MATNR>123</MATNR>
         </SUBNODE3>
         <SUBNODE3>
            <MATNR>1234</MATNR>
         </SUBNODE3>
      </SUBNODE1>
   </XMLDATA>
   <XMLDATA>
      <SUBNODE1>
         <SUBNODE2/>
         <SUBNODE3>
            <MATNR>123</MATNR>
         </SUBNODE3>
         <SUBNODE3>
            <MATNR>1234</MATNR>
         </SUBNODE3>
      </SUBNODE1>
   </XMLDATA>
</ns0:MT_Test>
useOneAsMany_customUDF
for(int i =0;i<var1.length;i++)
   for(int j=0;j<var1.length;j++)
      result.addValue(var1[j]);
    result.addContextChange();
Hope it helps!

Similar Messages

  • Sub Order not getting created

    Hi All,
               i am debuggin a code which is creating SUB ORDER (iw36) through call transaction method.
    The transaction is filling the superior oder ,but after OK CODE it doesnt navigate to the next screen, instead it shows a message log, without any messages.
    In the debugging mode I could notice that it fails at the point where FM CO_ZF_ORDER_LOCK_MULTI is called in SAPLCOIH. The parameter 'NOT_LOCKED' is having 2 records, as a result of which the FM CM_F_ANALYSIS is getting called which displays the log.
    Please guide me in understading why the sub order is not getting created.
    Thanks,
    Vasuki
    Edited by: Vasuki S Patki on Jul 14, 2009 3:03 PM

    Hi Gajesh,
    1)                 The Work center does not exist , I checked it in IR02..
    2)                 I created the sub order manually , but it works fine. There is no error when creating manually.. But whne it is called from the program it takes a wrong entry for Workcenter that does not exist. But when I change it to the existing Workcenter it proceeds further.
    3) I want to know where in the program the KTEXT is being populated,  as it is taking an entry that does not exist in the superior order, it is a new entry.
    Thanks,
    Vasuki

  • SRM PR is not getting created in ECC backend

    Hello Experts,
    We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping.  We do have PI 7.11 running in the Environment as well.
    We are on ECC 6.0 with Ehp 4.0
    Purchase Order:
    However we can see the PO creating successfully using PI.
    Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
    is this the reason that we need PI?
    Purchase Requisition:
    PR Creation is not working:
    PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
    I also have a question to ask:
    1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
    Please advice.
    Thanks
    Kumar

    yes, i could see a PR number with all this additional details as below.
    Table   BBP_PDBEI
    CLIENT                       453                                                              Client
    GUID                         4CAEFA58EB9D005CE1008000AC1C2031                                 Globally Unique identifier
    BE_LOG_SYSTEM                QA1400                                                           Logical System of Logistics Backend
    BE_OBJ_ITEM                                                                                Follow-On Object Item in Back-End System
    BE_OBJECT_TYPE               BUS2105                                                          Follow-On Document Object Type in Back-End System
    BE_OBJECT_ID                 2000000167                                                       Follow-On Document Object ID in Back-End System
    BE_REFOBJ_TYPE                                                                                Reference Object Type in Back-End System
    BE_REFOBJ                                                                                Reference Object in Back-End System
    BE_REFOBJ_ITEM                                                                                Reference Object Item in Back-End System
    BE_REFOBJ_SBITM                                                                               Reference Object Sub-Position in Backend System
    BE_REFOBJ_TYPE2                                                                               Reference Object Type in Back-End System
    BE_REFOBJ2                                                                                Reference Object in Back-End System
    BE_REFOBJ_ITEM2                                                                               Reference Object Item in Back-End System
    BE_REFOBJ_FYEAR2             0000                                                             Reference Document Object - Fiscal Year in Back-End System
    BE_STGE_LOC                                                                                Storage location
    BE_PLANT                     2016                                                             Plant
    BE_BATCH                                                                                Batch Number
    BE_VAL_TYPE                                                                                Valuation type
    BE_MOVE_REAS                 0000                                                             Reason for Movement
    BE_EXPERYDATE                00000000                                                         Shelf Life Expiration Date
    BE_PUR_GROUP                 206                                                              Purchasing group
    BE_PUR_ORG                   2000                                                             Purchasing organization
    BE_CO_CODE                   2000                                                             Company Code
    BE_DOC_TYPE                  CLRQ                                                             Purchase Requisition Document Type
    BE_ACCREQUIRED                                                                                Account Assignment for Logical Backend Required
    BE_SP_STK_IND                                                                                Key for Special Stock Section
    BE_INFO_REC                                                                                Number of purchasing info record
    BE_MOVE_TYPE                 201                                                              Movement type (inventory management)
    BE_PACKNO                    0000000000                                                       Package number
    BE_INTROW                    0000000000                                                       Internal line number for limits
    BE_ITEM_TEXT                                                                                Short Text of a Service Purchase Order Item
    BE_PO_PRICE                  1                                                                Price from Backend
    BE_UNLOAD_PT                 200                                                              Unloading Point in Backend
    BE_DEL_IND                                                                                Deletion Indicator in Backend Documents
    BE_TRACKING_NO                                                                                Requirement Tracking Number
    BE_COND_TYPE                                                                                Condition Key
    BE_COND_STEP                 000                                                              Level Number
    BE_COND_COUNTER              00                                                               Condition counter

  • Excise invoice should not get created without PGI

    Hi,
    I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
    This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
    Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
    Kindly advise as to how this can be done.
    Regards,
    T Saravanan

    Dear Saravanan
    Two options are there
    -  in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
    -  apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
    thanks
    G. Lakshmipathi

  • Invoice is not getting created in Order related billing

    Dear all,
    I am trying to do a Order related billing. After creating the order i am going to VF01 and selecting the billing type i have created and trying to create the invoice. I am getting the error "No billing documents were generated. See log" when i am checking the Log its showing now errors.
    In case if my account determination procedure is wrong, system should allow me to create a Sales invoice and accounting document will not be generated. But in this case even the sales invoice is also not getting created.
    Please suggest me if there are any configuration changes i need to do to overcome this problem.

    Apart from the suggestion already given, also ensure that
    the order is not showing in incomplete log
    the order is not blocked for credit limit
    You can also cross check in VF04 whether system is fetching that sale order.  For information, once you execute VF04, by default, system will check only "Delivery related" check box.  You have to manually select "Order related" check box.
    G. Lakshmipathi

  • File not getting created in a different server

    My requirement.
    I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
    I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
    When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
    Is there any function module or any other way for the file to get generated in the PI system.
    Please explain with an example.
    Regards,
    Vish

    Try to use  search FTP in se37 or checkout the below FM
    CALL FUNCTION 'EPS_FTP_MPUT'
      EXPORTING
        RFC_DESTINATION            =
    *   FILE_MASK                  = ' '
    *   LOCAL_DIRECTORY            = ' '
    *   REMOTE_DIRECTORY           = ' '
    *   OVERWRITE_MODE             = ' '
    *   TEXT_MODE                  = ' '
    *   TRANSMISSION_MONITOR       = 'X'
    *   RECORDS_PER_TRANSFER       = 10
    *   MONITOR_TITLE              =
    *   MONITOR_TEXT1              =
    *   MONITOR_TEXT2              =
    *   PROGRESS_TEXT              =
    * IMPORTING
    *   LOCAL_DIRECTORY            =
    *   REMOTE_DIRECTORY           =
    *   LOCAL_SYSTEM_INFO          =
    *   REMOTE_SYSTEM_INFO         =
    * TABLES
    *   FILE_LIST                  =
    * EXCEPTIONS
    *   CONNECTION_FAILED          = 1
    *   INVALID_VERSION            = 2
    *   INVALID_ARGUMENTS          = 3
    *   GET_DIR_LIST_FAILED        = 4
    *   FILE_TRANSFER_FAILED       = 5
    *   STOPPED_BY_USER            = 6
    *   OTHERS                     = 7
    IF SY-SUBRC <> 0.
    * Implement suitable error handling here
    ENDIF.

  • Weblogic Domain not getting created in SOA Suite 11g R2

    I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
    1) Is this problem related to Oracle repository for SOA suite 11g?
    2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?

    Hi,
    Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
    Perform server start and then check if it gets created or not.
    ## rank answer if it is helpful ##
    Thanks,
    Ranjan

  • BP not getting created while creating employee

    Hi,
    When I Hire an employee a BP should be created for it. It used to happen earlier in the system but after we moved to another system this is not working.  Can someone please let me know the necessary config for this?
    I've the following settings:
    HRALX   ONUMB  = 2
    HRALX   OSUBG = MD
    The MD number range is from 90000000 to 9999999999. Should this number range be internal or external?
    When I use the HR_SYNC_PERSON report for an employee I get the error as
    "Determination of connections to object 'BP' of 'CP' '50000201' failed"
    "Object of type 'US' with ID '1122' does not exist or is inconsistent"
    "Determination of connections to object 'BP' of 'O' '50000101' failed" etc
    Also I need to upload the employee master data using LSMW and BP does not get created with LSMW also? Is there some specific config while using LSMW?
    Please help.

    Whenever you are uploading employees using LSMW, you need to run program HR_SYNC_PERSON.
    Pls refer to the following thread for further info:
    Assignment: Business partner for person '50000029' is not unique
    Regards,
    Dilek

  • AUC Asset not getting created when Internal Order is created

    Dear Experts,
    While Creating the internal order ( Object Class - Investment Measure)
    AuC (Asset Under Construction) not getting created automaticall . Note Investment profile is already there in the order.
    Following steps below are configured -
    1. Define the AuC Asset Class (with investment measure) - OAOA
    2. Define the Asset Class u2013 for Main Asset - OAOA
    3. Define Investment Profile - OITA
    a. Assign the AuC Asset Class (Step-1) in the investment profile
    4. Assign Investment Profile to Model Order - OITA
    5. Define Order Type (Investment) - KOT2
    a. Settlement Profile - OKO7
    b. Maintain Allocation Structures - OKO6
    Thanks
    Sanjai

    Hi Sreekanth,
    What is the setting needed to create AUC Automatically when an Internal order is created ?
    I have done all the setting, but still when I save Internal order neither AUC asset is getting created.
    So I went to extras selected create AUC and it went to AS01, but when I came back (F3) from AS01 to Internal Order and save , Auc Asset is not getting captured in the settlement rule. I even tried to give manually the AUC Asset in the settlement rule, for which sys is not allowing in the settlement rule.
    Any thoughts are highly appreciated
    Advance Thanks
    Sanjai

  • Accounting doucment not get created for Credit Memo

    Hi
        When creating a cancellation doucment(vf11) for credit memo accounting document not get created.While I go for analysis then it is determining the G/L account.But not getting created the accounting doucment.
    When i select "Release to accounting" then it is giving a message like this:
    "Automatic clearing of billing document 951
    and canc. doc. 90000572 not poss."  as informatiion first
    and then later it is throwing an error message that "maintain correct number range"
    While for the same material or earlier cancellation happened and accounting doucment get created.
    Please help me out;How would i get this solved?
    Thanks in advance

    Hi,
    You may also check for Number Range - Maintainance & Assignment.
    T. Code: SNRO
    Table/ View: RV_BELEG
    Here, Mantain Number Range.
    To Assign,
    T. Code: SM30
    T.Code: Bill_Num (or select if different in your case)
    Assign No. range to your combination of Sales OrgDist.ChannelBill Type i.e. for Cancelled Billing Doc. Type
    To Maintain Number Range for Accounting Documents,
    T. Code: FBN1
    Best Regards,
    Amit

  • WBS Elements not getting created in ECC Project System from CRM 7.0

    Dear all,
    We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
    1.       Set up the RFC connections between the two systems
    2.       Selected the connection type as Middleware in CRM system.
    3.       Installed the cProject Add on in CRM box.
    4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
    5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
    6.       Created and released the campaign ids being created in the CRM system.
    As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
    Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
    Thanks and Kind Regards,
    Aditya Shrivastava

    Hello Aditya,
    We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
    Some inputs related to our system,
    We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
    Your help is highly appreciated.
    Thanks & Regards,
    Sumukh Kapoor.

  • Attachment not getting created in PI from CRM

    Hi Everyone,
    I am trying to create attachments in PI from CRM but it is not getting created there. I am executing the following steps:
    By default I am getting the attachment data in Binary format so I am using this function module to convert it into XSTRING format.
              CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
                              EXPORTING
                         input_length = lv_input_length
                         first_line   = lv_first_line
                         last_line    = lv_last_line
                       IMPORTING
                         buffer       = lv_xbuffer
                       TABLES
                         binary_tab   = file_content_binary.
       2. Then I am getting the server context and the protocol.
                           obj_server_context = cl_proxy_access=>get_server_context( ).
                           obj_attch_protocol ?= obj_server_context->get_protocol( if_wsprotocol=>attachments ).
    * Assign File naame to STRING Variable
                           lv_name =  lv_filename.
    * Attach file to the service response.
                           obj_attachment = obj_attch_protocol->get_attachment_from_binary(
                                      data = lv_xbuffer
                                      type = if_ai_attachment=>c_mimetype_pdf
                                      name = lv_name ).
                           APPEND obj_attachment TO t_prx_attach.
                           obj_attch_protocol->set_attachments( t_prx_attach ).
       3. Then I am using a proxy class which has Input and Output structures for sending data to PI and getting the response respectively. And then in the end I am calling the proxy and passing the structures.
         With this I am unable to see the attachmenmts in sxmb_moni transaction. Please help.

    Hi Gurus,
    Can you please help with some pointers on this.
    I have used below links as reference for coding.
    Link 1 :
    http://help.sap.com/saphelp_nw04/helpdata/en/a7/3b2a2d45a34a23b75e3b18745c63bc/content.htm
    Link 2:
    http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/10/19/abap-proxy-protocols-use-cases-and-examples
    After setting attachment(Method SET_ATTACHMENTS) i am not getting any exceptions,but still i am not able to see any attachment created in SXMB_MONI.
    Thanks in Advance,
    Manil.

  • File not getting created in Target Directory..........

    Hi All,
               We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message  monitoring as well, which is also successful...
    What could be the reason of such behaviour, and is there a way to track the where the target file is getting placed?
    Please Help
    Regards,
    Jayashri

    >
    Jayashri Rade wrote:
    > Hi All,
    >            We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message  monitoring as well, which is also successful...
    i
    Did you check the receiver communication channel in communication channel monitoring?
    Are there any errors?

  • Spool not getting created in batch job

    Hello experts,
    We have a requirement of printing BA00, BA01 and LD00 from different application.
    We have done same code for all BA00, BA01, and LD00.
    Normally the code is working fine except in few cases, when batch job is created but spool is not created.
    DATA: job_name TYPE tbtcjob-jobname,
                  number   TYPE tbtcjob-jobcount,
                  print_parameters TYPE pri_params,
                  wv_pripar    TYPE pri_params,
                  wv_arcpar    TYPE arc_params,
                  wv_val       TYPE c VALUE 'X',
                  wv_false     TYPE c VALUE 'X',
                  gv_mandt     TYPE tsp01-rqclient,
                  gv_user      TYPE tsp01-rqowner.
              CLEAR: gv_mandt, gv_user, number.
              gv_mandt = sy-mandt.
              gv_user  = sy-uname.
              job_name = 'DELIVERY_PRINTING'.
              CLEAR: range1.
              range1-sign = 'I'.
              range1-option = 'EQ'.
              range1-low = 'LD00'.
              CLEAR: range1-high.
              APPEND range1 TO range.
              CALL FUNCTION 'JOB_OPEN'
                EXPORTING
                  jobname          = job_name
                IMPORTING
                  jobcount         = number
                EXCEPTIONS
                  cant_create_job  = 1
                  invalid_job_data = 2
                  jobname_missing  = 3
                  OTHERS           = 4.
              IF sy-subrc = 0.
                SUBMIT sd70av2a WITH  rg_kschl IN range
                                WITH  rg_vbeln IN deli_tab
                                TO SAP-SPOOL
                              SPOOL PARAMETERS print_parameters
                              WITHOUT SPOOL DYNPRO
                              VIA JOB job_name NUMBER number
                              AND RETURN.
                IF sy-subrc = 0.
                  CALL FUNCTION 'JOB_CLOSE'
                    EXPORTING
                      jobcount             = number
                      jobname              = job_name
                      strtimmed            = 'X'
                    EXCEPTIONS
                      cant_start_immediate = 1
                      invalid_startdate    = 2
                      jobname_missing      = 3
                      job_close_failed     = 4
                      job_nosteps          = 5
                      job_notex            = 6
                      lock_failed          = 7
                      OTHERS               = 8.
                  IF sy-subrc <> 0.
                  ENDIF.
                ENDIF.
                WAIT UP TO 10 SECONDS.
    ** to give the data to the printer***
    *            CLEAR gv_rqident.
                SELECT SINGLE listident INTO gv_listident FROM tbtcp
                              WHERE jobname = job_name
                               AND  jobcount = number.
              IF sy-subrc = 0.
                MOVE gv_listident to gv_rqident.
                CALL FUNCTION 'RSPO_OUTPUT_SPOOL_REQUEST'
                  EXPORTING
                    spool_request_id = gv_rqident.
              ENDIF.
    The same code is for all the output BA00, BA01 and LD00.
    The issue is that for few batch jobs (which is created in the above code) , spool is not getting created.
    Thanks and Regards,
    Paritosh Pandey

    Hi,
    The code starting from WAIT UP TO 10 SECONDS. - not only does it look attrocious, is error prone (if no free process for executing batch job is available for 10 seconds, or if the job runs for more than 10 seconds, what will happen...?), but seems utterly unnecessary... Is there any reason immediate spool output can not be handled by simply setting PRINT_PARAMETERS-PRIMM = 'X'?
    cheers,
    Janis
    Edit in:
    Ok, i just read Document in spool but not printed... Do not use an output device relying on frontend access methods to do printing from background processing. Frontend is not available during background processing, period. To my knowledge there is no easy, clean solution to this problem other than defining and assigning, per user, output devices not relying on frontend printing. What if the dialog user has logged off by the time batch job finishes..? May the spool remain unprinted?
    Has the SAP Basis refused to define output devices (I have hard time believing this...)? Well, tell them one time to stop being silly and if they do not cooperate, tell the owner of the requirement that it can not be implemented due to uncooperative Basis then... and that the users will have to keep going to SP01 and manualy start the output!
    Message was edited by: Jānis B

  • File not getting created at the Reciever

    Hi All,
    I have implemented a simeple file to file scenario. The file is getting deleted from the source directory but is not getting created in the target directory. It shows a checkered flag in SXMB_MONI . When i do Communication Channel monitoring for the reciever Comm. Channel, it shows no messsages .
    I have refreshed the Cache in Integration directory. it is still not working.
    I tried using a different Communication channel with the Mail adapter that is working fine.
    I cant figure out what the problem is please help.
    Many Thanks,
    Neha

    Hi! Neha,
    Here i want to add some points :
    Even I faced same problem in project....... then I followed this procedure...
    My scenario is FILE TO RFC via FTP Server in file adapter.
    Here issue is file is picking from FTP and showing success in MONI but data is not reaching to BW system..
    Most of the times I checked and I did successfully.
    Main issue are due to:::
    1. Check Queues in Inbound queue SMq2
    2. Trace teh step by step in message flow in message monitoring that means check whether message flows
            from a) Intergration Engine
                   b) Adapter Engine..
    3. Check and trace the flow in Message monitoring in Run Time work Bench
    4. Check Status of Receiver communication Channel in Communication channel Monitoring
    5) Check whether Business Services are Scheduled in Availability Time planning or not
    6  Also Check in Visual admin whether the services are released or not if any others are might using the same servivcees and cahnnels and suppose if they are scheduled or not
    7. Do Cache Refresh mainly SXI CACHE, ADAPTER ENGINE CACHE
    8 Finally if still not resolved J2EE ENgine SOFT Restart..instead of doing restarting entire XIengine server.
    Once the Server is started then defintely all the messages if suppose if 40 messages are picked from source directory and not reached to Target then all those definetely 100% become success and reached
    Note:: All above needs to check only if development part is correctly configured.
    Also check the Receiver target and sender directory Permissions in FTP Server i.e., rwx permissions okay
    Thanks
    Amar Srinivas Eli
    Reward Points if useful

Maybe you are looking for

  • Creative Cloud Packager 1.2 problem

    One of my customers created a package with Creative Cloud Packager 1.2. And he tries to install it, but the installation stops halfway and starts rolling back. Here is the PDApp.log 07/24/13 11:26:12:660 | [INFO] |  | ASU | PIM | PIM |  |  | 8396 | B

  • Help in SAP in iPhone

    Good day experts, I have a lots of questions regarding to this matter. I just already downloaded the SAP Apps in my iPhone and this are my questions. 1. How can I connect my iPhone in my SAP Server or in my localmachine to view my database. 2. How ca

  • 945GCM478-L Standby Issue

    I have had a 945GCM478-L running for a year or so with no issues, the kids do their gaming on and it runs well.  Recently I noticed the kids leaving it on more then I liked so I enabled the power management and set the system standby at two hours.  T

  • ITunes 11.0.4 pinwheels when I launch

    iTunes 11.0.4 pinwheels when I launch on new computer running OSX 10.8.4-not sure if it ever worked since I got the computer running .  I get no error code because it just pinwheels.  I can access iTunes on my iPhone and it is not an internet problem

  • Placing of a KF in order in cube

    Hi, I need to add a Keyfigure (TF amt)below another keyfigure(Amount) (in the order) in cube. When i place it in order and save it in cube . When i reenter the cube the KF (TF Amt) will be at the last of all KF. Kindly update me hoe to place the KF(T