Sub-Organization's Network control Policy used by a vNIC Template causes Warning
Hi,
using UCSM 1.4.(1i) if a Network Control Policy defined in a Sub-Origaniziation is used by a vNIC Template the following warning shows up:
* Description:
** Policy reference nwCtrlPolicyName does not resolve to named policy.
* ID: 792882
* Cause: named-policy-unresolved
* Code: F4526851
This does not happen if the network control policy has been defined in the "root" organization.
Any ideas on how to get rid of that warning?
Ralph
Ralph,
I have had the same problem in my environment for awhile. I have been ignoring it because even though the warning says the policy can't be found when I check the NIC Templates in the server OS they are able to see the CDP information so the settings have been working. I found that if I just go ahead and create another policy in root with the same name the warnings all clear. I figure this is some buggy alert. I know the change in setting was getting recognized and if the vNIC Template can't find it then why would it be an option in the drop down right? Either way taking advantage of the fact that if it can't find it in the sub-org the UCS automatically searches for the same named item in the root org, I didn't need to change vNIC Templates I just had to let it find the new one in root.
I also find it interesting that no VNIC has this problem just VNIC Templates.
Similar Messages
-
have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciatedYou are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network. -
Network segmentation policy and QOS settings on Nexus1000v
Hi all,
has someone an example on applying QOS (marking cos) using a network segmentation policy with NSM feature enabled and VshieldManager/Vcloud on Nexus1000v?
I'm using the current default policy
network-segment policy default_segmentation_template
description Default template used for isolation backed pools
type segmentation
import port-profile NSM_template_segmentation
port-profile type vethernet NSM_template_segmentation
no shutdown
description NSM default port-profile for VXLAN networks.
state enabled
port-profile type vethernet <NSM Created>
vmware port-group
port-binding static auto expand
inherit port-profile NSM_template_segmentation
switchport access bridge-domain "xxxxxxxxx"
description NSM created profile.
state enabled
But Now i need to configure a cos marking for some org id (not for all organizations).Committed Information Rate (%) Peak Burst Size (ms) Committed Burst Size (ms) Max Queue Size: Can any of these be changed to optimize the NMH405? Thank you? Latency Measurements: Latency Boundary Boundary 1: 0 ms Boundary 2: 10 ms Boundary 3: 20 ms Boundary 4: 40 ms Boundary 5: 100 ms Boundary 6: 1000 ms Boundary 7: 3000 ms Latency Threshold (ms) Fragmentation Settings: IP Fragmentation Enable IP Fragment Size 100 148 244 292 340 388 436
-
Hello All,
Good day. May I ask if anyone experienced this error when trying to access remoteapps in Azure? We are using IaaS and set-up RDS using Windows 2012 R2 but we are getting an error below.
"Your connection was denied because of a Network Access Policy (TS_NAP). Please contact your server administrator.
Various roles and services (Broker, Session Host, RD Gateway and Web Access are installed on each VMs).
Please advise.
Thanks,
GlennHi Glen;
Looks like the set up was not done correctly. Please follow the guidelines given on this
blog by Keith Mayer.
Regards;
Prasant -
I need a list of all the organizational units, sub organizational units,
I need a list of all the organizational units, sub organizational
units,and their security groups which are present in all sub OUsHi,
There are lots of way to export OU, Sub OU and Security Group.
1> Open AD console > run query > export with CSV file.
2> Run “CSVD” command as per your requirement.
3>Download Manage Engine Software > Install to any computer of Domain member > Set credential for domain controller access > Export the customized information, as per your requirement with XLS, PDF,
CSV or Ect.
3rd option is very easy to export customized reports
Deepak Kotian.
MCP, MCTS, MCITP Exchange 2010 Ent. Administrator
Disclaimer:
Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognizes useful contributions. Thanks!
All the opinions expressed here is mine. This posting is provided "AS IS"
with no warranties or guarantees and confers no right -
Cisco Network Control System software
As far as I know, the NCS is an appliance. But today some people told me that he has a copy of Cisco's Network Control System software. I am confused. If what he said is true, can I install the software on the Windows platforms like Win2003 or Win2008?
Thanks in advance.
RobertHi Robert,
Here we go
Product Specifications for Cisco Prime NCS
Item
Specification
VMware ESX and ESXi Versions (Virtual Appliance on a Customer-Supplied Server)
If deploying Cisco Prime NCS as a virtual appliance, on a customer-supplied server, one of the following versions of VMware ESX or ESXi may be used:
• VMWare ESX or VMWare ESXi version 4.1
Minimum Server Requirements for Deploying Virtual Appliances
Cisco Prime NCS High-End Virtual Appliance:
• 15,000 lightweight access points; 5000 standalone access points; 1200 wireless LAN controllers and 5000 switches
• Minimum RAM: 16GB
• Minimum Hard disk space allocation: 400GB
• Processors: 8, at 2.93GHz or better
Cisco Prime NCS Standard Virtual Appliance:
• 7500 lightweight access points; 2500 standalone access points; 600 wireless LAN controllers and 2500 switches
• Minimum RAM: 12GB
• Minimum Hard disk space allocation: 300GB
• Processors: 4, at 2.93GHz or better
Cisco Prime NCS Low-End Virtual Appliance:
• 3000 lightweight access points; 1000 standalone access points; 240 wireless LAN controllers and 1000 switches
• Minimum RAM: 8GB
• Minimum Hard disk space allocation: 200GB
• Processors: 2, at 2.93GHz or better
Deploying Cisco Prime NCS Virtual Appliance on CiscoWorks Wireless LAN Solution Engine (WLSE) models 1130-19 or 1133
• Cisco Prime NCS is not supported on the Cisco WLSE hardware
http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps11682/ps11686/ps11688/data_sheet_c78-650051.html
Cheers!
Rob -
Network - subnetwork hierarchy using std networks.
I want to create network / subnetwork hierarchy using std. networks.
How is it done in PS.Create standard Network > Create Activities in Standard Network > Assign Milestone in Std NW > Define Milestone functions/Parameters > Now with the help of this Std network number you can create Sub Network as you wants [In CN21 Transaction code input Std NW number then automatically system will create all subnetwork from that Std Network
Swapnil Kharul -
Cisco NAC web agent Network Security Policy
I have a computer with an installed McAfee Antivirus that us up to date. However, each time try to access one of my client's server via VPN, I successfully connect to VPN using Cisco Anyconnnect but whenever I try to download the web agent and the device security check is being run, I get the feedback "Host is not compliant with network security policy". It also tells me a Remediation description of "please update your antivirus". (see attached screenshot)
Please note that I already have my McAfee antivirus updated and I have done everything to keep my computer in good shape in terms of security.
What is the possible cause for this?That means the CAM hasn't received an SNMP trap for that MAC address. Double-check that the WLC is set up to send traps to the CAM: http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/47/cam/m_woob.html#wp1290626
You can see if the CAM's received a trap for a specific MAC by looking under OOB Management > Devices > Discovered Clients. -
Network Control System - one device for whole world?
Hi all,
we have Network Control System located in South Africa. Would it be possible to effectively use it also for devices in e.g. LATAM, Europe or Australia? Round Trip Time for these locations can be up to 500 ms, ocassionaly, during busy hours, this can go up to 800 ms.
Thanks,
GorazdHi Scott,
Thanks for the response but I got to know that LMS and NCS are combined in single ISO image from PI 1.2 and can be installed on the same physical NCS appliance.
Can you pls check this.
Regards -
PFAL - Send a whole sub-organization unit
Hi,
I am trying to transfer data from SAP HR System to another SAP HR system susing the SAP XI. I want to know if there is way using the Tcode PFAL to send a whole sub-organization unit from 1 organizational unit.
Many Thanks for your help!!!
PMWe have a case where we need to determine all suborgs that belongs to a certain org:
CALL FUNCTION 'RH_STRUC_GET'
EXPORTING
act_otype = 'O'
act_objid = lv_parent_org_objid
act_wegid = lv_wegid
act_begda = lv_effective_date
act_endda = lv_effective_date
act_tdepth = 1
act_tflag = ''
act_vflag = ''
authority_check = 'X'
TABLES
result_tab = lt_result_tab
EXCEPTIONS
no_plvar_found = 1
no_entry_found = 2
OTHERS = 3.
lt_result tab will contain all suborgs belonging to the parent org you passed in.
We have a dynamic evaluation path determination, but in this case it should be the following sequence in your evaluation path:
No Obj. Type A/B Rel'ship Relationship Name Prio Rel.obj.type Skip
10 O B 002 Is line supervisor of * O
Transaction OOAW to maintain evaluation paths.
Hope that helps,
Michael -
OS X 10.5.7 Network control panel / diagnostics
Since updating to 10.5.7 the diagnostics accessed from the network control panel no longer show a correct status. That is, it shows both ISP and Internet as "failed", even though I am successfully connected to both. This persists even if I create a new location from scratch. Any suggestions?
Hi
I am sorry I am not sure what you are referring to. There is no such thing on a mac called the network control mac, control panels have not existed on a mac since OS9. Microsoft stole the term and they still use it on their systems.
If you are referring to the Network System Preference Panel found in
System Preferernces --> Network
Diagnostics are found by clicking on the 'assist me button'
If this is what you are referring to, when you say its not showing the correct status what exactly does it state.
Can you also state how you network is configured are you using DHCP or a fixed IP address. What is the make of your router? -
Hi
I use both Linux and Mac OS X. Under Linux, there are IP networking control files but I don't see any under OS X. I was curious how IP information is stored under OS X, if not in control files.
Thank you in advance.
PaulMac OS X uses its .plist for most elements of system configuration, including networking.
You can find the relevant file in /Library/Preferences/com.apple.networkConfig.plist
It's a binary plist file, which you can convert to text (XML) using plutil, or use a property list editor. -
Different sales organization single credit controle area
Hi,
Different sales organization single credit control area is it possibleYes. It is very much possible & pratically used by most of companies using SAP.
Just go thru SAP documentation in this menu paths & you will understand.
1. IMG - Enterprise Structure - Assignment - Financial Accounting - Assign company code to credit control area
2. IMG - Enterprise Structure - Assignment - Sales and Distribution - Assign sales area to credit control area
Hope this helps,
Thanks,
Jignesh Mehta -
In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.
I have checked with ISP, there response is like below:
Those are the NNI to GBNET IPs for Dominican Republic. They are Network IPs. You should be able to ping them-that means they are working.
WANRT01#show ip route | include 192.168.20.20
B 192.168.20.200/30 [20/0] via 192.168.20.226, 02:18:29
B 192.168.20.204/30 [20/0] via 192.168.20.226, 02:18:29
Here its shows from any of our MPLS site we are able to trace the IP and it seems like, 192.168.20.204/30 is one more site but in actual its not.
INMUMWANRT01#ping 192.168.20.205
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.205, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/232/260 ms
INMUMWANRT01#trace
INMUMWANRT01#traceroute 192.168.20.205
Type escape sequence to abort.
Tracing the route to 192.168.20.205
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.20.226 24 msec 24 msec 24 msec
2 192.168.20.206 [AS 8035] 232 msec 232 msec 252 msec
3 192.168.20.205 [AS 8035] 224 msec 224 msec * -
Unable to capture the Citrix network response time using OATS Load testing.
Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?
Hi keerthi,
1. I have pasted the code for the first issue
web
.button(
122,
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
.click();
adf
.table(
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
.columnSort("Ascending", "Name" );
}
Maybe you are looking for
-
2 Game Center Accounts on 2 iPads - with the same Apple ID. How to do that?
I really hope someone can help my daughter and I here... The story: My daughter and I had an iPad each - naturally, since she is a minor, both iPads had the same Apple ID & password. In Game Center, we had separate Accounts (so we wouldn't mess up ea
-
Do they send the ipod 5th generation to Puerto Rico?
Do they send the ipod 5th generation to Puerto Rico? I want to buy the new Ipod but i don't know if the Apple store sends it here. Help!
-
I want to install Lightroom 4 but I get an error message.
413 Header Length too Large I want to reinstall it on my PC (had to reformat) and I purchased the license in 2013 - it is currently installed on my mac, but I understood that was allowable because it was multi platform. Not interested in Creative C
-
ECP / OWA 500 internal error message
Good Afternoon all; We have just installed our first Exchange server (2013 SP1) on a 2012 r2 Standard server. The installation went without any errors. I installed the mailbox and client access in one server. I followed technet 2013 help for installa
-
Hi there, Before I start this question, I have to confess, I am a Windows user, my Linux knowledge is limited. Our company is looking to move our apps to a Linux platform, and I am doing a little feasibility research. We have some custom designed har