Sub page total in the smart forms
Hi Experts
I am facing page total problem in smartform. In my first page sub total adding only first line item amount of second page and it keeps going on every page further i.e. always next page first line item amount is getting added and therefore in every page, page total comes wrong. I am not able to find out the error.
plse help me .. many thanks in advance.
with regards
aaryaa
hi
input parameters output parameter s
W_NET_PRICE W_CAARY_FWD
IS_BIL_INVOICE GS_IT_PRICE
V_NETAMOUNT GS_IT_GEN_W
W_NET_PRICE
w_net_price = w_net_price + v_netamount.
Similar Messages
-
How to get the PO no in the smart form and in the print program from ME23N
hello all,
I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
Subhabrata.Hello Everyone,
I am new to the forum and also to abap.
Excuse me if it is a basic question.
I am taking care of the output types.
This is 1st time SAP will be implemented .
For purchase order , I go to NACE ---EF----NEU---Processing routines
print output---SAPFM06P---ENTRY_NEU----MEDRUCK
FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
EDI------------RANASTED--EDI_PROCESSING
DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
Are the above settings fine ?
What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
I searched and found that IN ECC 6 , we have to install OSS notes .
Gurus, please help me . Let me know what all oss notes be implemented and how to proceed from here .
Any help will be greatly appreciated ,
Monalisa -
Getting error while activating the smart form
hi guys,
i am getting the following run time error while activating the smart-form.
'SQL error in the database when accessing a table'.
can anyone tell why this error is comingRefer to the below link, it may help you to close the thread.
[SQL error in the database when accessing a table|SQL error in the database when accessing a table.;
Regards,
saiRam -
For this program i could send the smart form thru mail but in the inbox ..
*& Report ZSFOO
REPORT ZSFOO.
*& Report ZSFINV
TABLES : KNA1, " General Data In Customer Master
KNB1, " Customer Master(Company Code)
BSID, " Accounting: Secondary Index for Customers
ZSMARTFORM, " Custom table for Storing Bank Details
zsf_exp_inv, " Structure that stores required fields from all tables used
KNVK. " Customer Master Contact Partner
data : Begin of it_struct occurs 0.
include structure zsf_exp_inv01.
data : End of it_struct.
types : begin of ty_bsid,
kunnr like bsid-kunnr,
WAERS like bsid-WAERS,
XBLNR LIKE BSID-XBLNR,
BUDAT LIKE BSID-BUDAT,
WRBTR LIKE BSID-WRBTR,
BUKRS LIKE BSID-BUKRS,
end of ty_bsid.
types : begin of ty_kna1,
kunnr like kna1-kunnr,
NAME1 LIKE KNA1-NAME1,
STRAS LIKE KNA1-STRAS,
MCOD3 LIKE KNA1-MCOD3,
LAND1 LIKE KNA1-LAND1,
SORTL LIKE KNA1-SORTL,
end of ty_kna1.
types : begin of ty_knb1,
kunnr like knb1-kunnr,
ZTERM LIKE KNB1-ZTERM,
end of ty_knb1.
types : begin of ty_knVK,
kunnr like kNVK-kunnr,
NAME1 LIKE KNVK-NAME1,
end of ty_knVK.
types : begin of ty_ZSMARTFORM,
SNO LIKE ZSMARTFORM-SNO,
CURRENCY LIKE zsmartform-currency,
BANKNAME LIKE zsmartform-bankname,
ADDRESS1 LIKE ZSMARTFORM-ADDRESS1,
ADDRESS2 LIKE ZSMARTFORM-ADDRESS2,
ADDRESS3 LIKE ZSMARTFORM-ADDRESS3,
ADDRESS4 LIKE ZSMARTFORM-ADDRESS4,
ADDRESS5 LIKE ZSMARTFORM-ADDRESS5,
ADDRESS6 LIKE ZSMARTFORM-ADDRESS6,
VALIDFROM LIKE ZSMARTFORM-VALIDFROM,
VALIDTO LIKE ZSMARTFORM-VALIDTO,
end of ty_ZSMARTFORM.
data : it_bsid type table of ty_bsid,
it_kna1 type table of ty_kna1,
it_knb1 type table of ty_knb1,
it_zsmartform type table of ty_zsmartform,
it_knVK type table of ty_kNVK.
data : wa_bsid like line of it_bsid,
wa_kna1 like line of it_kna1,
wa_knb1 like line of it_knb1,
wa_zsmartform like line of it_zsmartform,
wa_knVK like line of it_knVK.
*****************Selection Screen**********************************
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS : S_KUNNR FOR KNA1-KUNNR,
S_belnr FOR BSID-belnr,
S_BUKRS FOR BSID-BUKRS,
S_CURR FOR ZSMARTFORM-CURRENCY.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF IT_PARAM OCCURS 0.
INCLUDE STRUCTURE ZPARAMETERS.
DATA : END OF IT_PARAM.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
SKIP 1.
Parameters : OPTION1 AS CHECKBOX,
P_POINF(300) type c,
OPTION2 AS CHECKBOX,
P_DESC(300) TYPE C,
OPTION3 AS CHECKBOX,
P_MONTH(200) TYPE C,
OPTION4 AS CHECKBOX,
P_RATE(100) TYPE C.
SELECTION-SCREEN END OF BLOCK B2.
**********************PARAMETERS***********************************
data : l type i,
Y(300) type c,
j type i,
k type i value 1,
s type i,
m(300) type c,
p type i,
z type i.
data : l1 type i,
Y1(300) type c,
j1 type i,
k1 type i value 1,
s1 type i,
m1(300) type c,
p1 type i,
z1 type i.
data : l2 type i,
Y2(300) type c,
j2 type i,
k2 type i value 1,
s2 type i,
m2(300) type c,
p2 type i,
z2 type i.
data : l3 type i,
Y3(300) type c,
j3 type i,
k3 type i value 1,
s3 type i,
m3(300) type c,
p3 type i,
z3 type i.
IF OPTION1 = 'X'.
concatenate P_POINF ',' into P_POINF.
l = strlen( P_POINF ).
do l times.
Y = P_POINF+j(k).
case Y.
when ','.
m = P_POINF+s(z).
s = j + 1.
z = -1.
p = p + 1.
if p = 1.
IT_PARAM-LINE1 = m.
endif.
if p = 2.
IT_PARAM-LINE2 = m.
endif.
if p = 3.
IT_PARAM-LINE3 = m.
endif.
when '.'.
if p = 4.
IT_PARAM-LINE4 = m.
endif.
endcase.
j = j + 1.
z = z + 1.
enddo.
ENDIF.
IF OPTION2 = 'X'.
concatenate P_DESC ',' into P_DESC.
l1 = strlen( P_DESC ).
do l1 times.
Y1 = P_DESC+j1(k1).
case Y1.
when ','.
m1 = P_DESC+s1(z1).
s1 = j1 + 1.
z1 = -1.
p1 = p1 + 1.
if p1 = 1.
IT_PARAM-LINE5 = m1.
endif.
if p1 = 2.
IT_PARAM-LINE6 = m1.
endif.
if p1 = 3.
IT_PARAM-LINE7 = m1.
endif.
when '.'.
if p1 = 4.
IT_PARAM-LINE8 = m1.
endif.
endcase.
j1 = j1 + 1.
z1 = z1 + 1.
enddo.
ENDIF.
IF OPTION3 = 'X'.
concatenate P_MONTH ',' into P_MONTH.
l2 = strlen( P_MONTH ).
do l2 times.
Y2 = P_MONTH+j2(k2).
case Y2.
when ','.
m2 = P_MONTH+s2(z2).
s2 = j2 + 1.
z2 = -1.
p2 = p2 + 1.
if p2 = 1.
IT_PARAM-LINE9 = m2.
endif.
if p2 = 2.
IT_PARAM-LINE10 = m2.
endif.
if p2 = 3.
IT_PARAM-LINE11 = m2.
endif.
when '.'.
if p2 = 4.
IT_PARAM-LINe12 = m2.
endif.
endcase.
j2 = j2 + 1.
z2 = z2 + 1.
enddo.
ENDIF.
IF OPTION4 = 'X'.
concatenate P_RATE ',' into P_RATE.
l3 = strlen( P_RATE ).
do l3 times.
Y3 = P_RATE+j3(k3).
case Y3.
when ','.
m3 = P_RATE+s3(z3).
s3 = j3 + 1.
z3 = -1.
p3 = p3 + 1.
if p3 = 1.
IT_PARAM-LINE13 = m3.
endif.
if p3 = 2.
IT_PARAM-LINE14 = m3.
endif.
if p3 = 3.
IT_PARAM-LINE15 = m3.
endif.
if p3 = 4.
IT_PARAM-LINe16 = m3.
endif.
endcase.
j3 = j3 + 1.
z3 = z3 + 1.
enddo.
ENDIF.
APPEND IT_PARAM.
select * from kna1 into corresponding fields of table it_kna1 where kunnr in s_kunnr.
select * from knb1 into corresponding fields of table it_knb1 for all entries in it_kna1 where kunnr = it_kna1-kunnr.
select * from bsid into corresponding fields of table it_bsid for all entries in it_kna1 where kunnr = it_kna1-kunnr and belnr in s_belnr and bukrs in s_bukrs..
SELECT * FROM KNVK INTO CORRESPONDING FIELDS OF TABLE IT_KNVK FOR ALL ENTRIES IN IT_KNA1 WHERE KUNNR = IT_KNA1-KUNNR.
select * from zsmartform into corresponding fields of table it_zsmartform .
DATA : AMT LIKE SPELL.
loop at it_bsid into wa_bsid.
read table it_kna1 into wa_kna1 with key kunnr = wa_bsid-kunnr.
read table it_knb1 into wa_knb1 with key kunnr = wa_bsid-kunnr.
read table it_zsmartform into wa_zsmartform with key CURRENCY = wa_bsid-WAERS.
READ TABLE IT_KNVK INTO WA_KNVK WITH KEY KUNNR = WA_BSID-KUNNR.
it_struct-name1 = wa_kna1-name1.
it_struct-stras = wa_kna1-stras.
it_struct-mcod3 = wa_kna1-mcod3.
it_struct-land1 = wa_kna1-land1.
it_struct-sortl = wa_kna1-sortl.
it_struct-zterm = wa_knb1-zterm.
it_struct-xblnr = wa_bsid-xblnr.
it_struct-currency = wa_zsmartform-currency.
it_struct-currency = wa_bsid-waers.
it_struct-budat = wa_bsid-budat.
it_struct-BANKNAME = wa_zsmartform-BANKNAME.
it_struct-ADDRESS1 = wa_zsmartform-ADDRESS1.
it_struct-ADDRESS2 = wa_zsmartform-ADDRESS2.
it_struct-ADDRESS3 = wa_zsmartform-ADDRESS3.
it_struct-ADDRESS4 = wa_zsmartform-ADDRESS4.
it_struct-ADDRESS5 = wa_zsmartform-ADDRESS5.
it_struct-ADDRESS6 = wa_zsmartform-ADDRESS6.
it_struct-CURR = WA_BSID-WRBTR.
IT_STRUCT-NAME = WA_KNVK-NAME1.
IT_STRUCT-AMOUNT = IT_SPELL-AMT.
append it_struct.
endloop.
data : x type i,
x1 type i,
a type string.
loop at it_struct.
x = strlen( it_struct-curr ).
x1 = x - 3.
a = it_struct-curr+0(x1).
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
AMOUNT = a
CURRENCY = ' '
FILLER = ' '
LANGUAGE = SY-LANGU
IMPORTING
IN_WORDS = AMT.
EXCEPTIONS
NOT_FOUND = 1
TOO_LARGE = 2
OTHERS = 3
*IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
endloop.
DATA: ws_ucomm LIKE sy-ucomm.
DATA: form_name TYPE rs38l_fnam.
DATA: wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop.
data : i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: t_otfdata TYPE ssfcrescl,
t_pdf_tab LIKE tline OCCURS 0 WITH HEADER LINE,
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
data : wa_objhead TYPE soli_tab,
wa_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
wa_buffer TYPE string,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
DATA: t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE string.
DATA: w_bin_filesize TYPE i.
wa_ctrlop-getotf = 'X'.
CALL FUNCTION '/1BCDWB/SF00000001'
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_outopt
user_settings = 'X'
IN_WORDS = amt
importing
job_output_info = t_otfdata
TABLES
I_ZSF_EXP_INV = it_struct
I_ZPARAMETERS = it_param.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
bin_filesize = w_bin_filesize
CODEPAGE = ' '
filename = 'c: est59.PDF'
filetype = 'BIN'
IMPORTING
filelength = w_filesize
TABLES
data_tab = t_pdf_tab
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10
IF sy-subrc <> 0.
*You should include message-id in the report heading
WRITE : sy-subrc.
ELSE.
WRITE : 'File Test.pdf downloaded succesfully'.
ENDIF.
loop at t_pdf_tab.
translate t_pdf_tab using '~'.
concatenate wa_buffer t_pdf_tab into wa_buffer.
endloop.
translate wa_buffer using '~'.
do.
i_record = wa_buffer.
append i_record.
shift wa_buffer left by 255 places.
if wa_buffer is initial.
exit.
endif.
enddo.
Attachment
refresh:
i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear wa_objhead.
i_objbin[] = i_record[].
Create Message Body
Title and Description
i_objtxt = 'test with pdf-Attachment!'.
append i_objtxt.
describe table i_objtxt lines v_lines_txt.
read table i_objtxt index v_lines_txt.
wa_doc_chng-obj_name = 'smartform'.
wa_doc_chng-expiry_dat = sy-datum + 10.
wa_doc_chng-obj_descr = 'smartform'.
wa_doc_chng-sensitivty = 'O'.
wa_doc_chng-doc_size = v_lines_txt * 255.
Main Text
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + strlen( i_objtxt )
clear i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
append i_objpack.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Hazard report-' p_load '.pdf' INTO i_objpack-obj_descr.
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-obj_descr = 'test'.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Attachment
(pdf-Attachment)
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
Länge des Attachment ermitteln
describe table i_objbin lines v_lines_bin.
read table i_objbin index v_lines_bin.
i_objpack-doc_size = v_lines_bin * 255 .
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'smart'.
i_objpack-obj_descr = 'test'.
append i_objpack.
clear i_reclist.
i_reclist-receiver = '[email protected]'.
i_reclist-express = 'X'.
i_reclist-rec_type = 'U'.
append i_reclist.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
COMMIT_WORK = 'X'
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = wa_objhead
CONTENTS_BIN = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
for this program i could send the smart form thru mail but in the inbox i could not
download it it says needed to be decoded properly.file not starting with pdf....
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'Mail sent'(003)
txt1 = 'The report is sent via e-mail.'(004)
txt2 = ' '.
LEAVE PROGRAM.
ENDIF.hi krishna,
u r right. there is no error in sending the mail and the file but the problem is that file created and converted to pdf is not done properly.jst verify whether the file is created properly or not .thats the only problem that can occurs else ur program is absolutely right. -
How to find the program name of the smart form?
How to find the program name of the smart form if output type is not known?
thanks in advance...How to find the program name of the smart form if output type is not known?
thanks in advance...
T-code SE16
Enter table name: TNAPR -> Press enter key
Enter smartform name in input field(SFORM): Z_your_smartform_name
Execute
you can find program name under the column PGNAM/Program name.
Regards
sudheer -
Driver program for the Smart form
Hi all.
I have an issue in smart forms.
we are implementing RE(Real Estate) module with the version ECC 6.0.
In the RE ,for printing the forms.I know the name of the SMART form only.
how can i know the corresponding Driver program.
Plaese help me to solve this issue.
Thanks on advance,
Regards,
EswarHi,
You can get your driver program name from tnapr table but some are also configured from others way also.
Try this will work in any case.
Open your Smartform then execute.
Then function module name is displayed
Open function module and put a break point on first executable statement.
May be break point on statement like
CLEAR DOCUMENT_OUTPUT_INFO.
After giving breakpoint trigger your Smartform for printing in fresh session then it will stop in debug mode then in call tab you can see your driver program name. -
Hi All,
Can any body guide me how to debug the smart forms.
Thanks & Regards,
Satish.Hi,
The the best way to debug the form is to put a breakpoint in the function module generated by the smartform.
Procedure:
Open the smartform we want to debug.
Goto Environment -> Function module name.
Open the function module in SE37. From the menu GOTO -> main program. Open the last include.
This incude contains the entire code ie the code we have written in initalization + form routines + program lines + sap generated code.
Even we can search for the text nodes, folders, templates, tables, graphics, address nodes etc with their names.
Put a breakpoint at any point you want.
If we issue any doc which triggers this form, when the control reaches the break point it will stop.
Please note that hard-coding the break points in the code ( Program lines ) is not recommended and it can´t be done unless if it is development server.
So, always put a session break point in the related function module.
We can use SFTRACE transaction to know the sequence of the control flow.
If you want to break at each and every text that is printed on the output form put the break points in the forms.
1. %write_text to break at text element.
2. %WRITE_TEXT_MODULE to break at text module.
3. %WRITE_INCLUDE_TEXT to break at include text.
Please put a break point at the first sy-subrc check.
If the control reaches this point, you can find the name of the element in the varible NAME and the content in the text node in %TEXT.
Its easy to understand the sequence of the printing if we put a breakpoint as stated above.
Regards,
Satish. -
Problem in multiple printing in the Smart Forms
Hi Experts,
From the driver program I am passing Internal table with multiple records for employee,
But the smart forms is printing only single form for the employee.
Could you please suggest what need to be done in order to print multiple forms for employee.
Regards,
IFFIF sy-tabix EQ 1 .------>only for first loop it will give dialog box
CALL FUNCTION fm_name
EXPORTING
user_settings = 'X'
vbeln = it_vbeln-vbeln
pdf = r2
rbiclear = c3
IMPORTING
job_output_options = job_out
einv = einv.
ELSE.
c_par-no_dialog = 'X'.----
> if u set this then u will not get dialog box again and again
out_opt-tdnoprev = 'X'.
out_opt-tddest = job_out-tddest.
out_opt-tdprinter = job_out-tdprinter.
CALL FUNCTION fm_name
EXPORTING
control_parameters = c_par
output_options = out_opt
user_settings = space
vbeln = it_vbeln-vbeln
pdf = r2
rbiclear = c3
IMPORTING
job_output_options = job_out
einv = einv.
ENDIF. -
Where the smart forms stored in Package
Hi,
Where the Smart forms are stored in package,
In package only following option is there,
1.Dictionary Object.
2.Programs,
3.Includes,
4.Transactions,
5.Message class.Hi Udaya,
When you activate a smartform a function module is generated, so smartform is nothing but a function module.Once your smartform is activated, run it check the function module name.When you activate a smartform it generates a function module in a function group the name of both will be same.
Go to SE80 select function group and give the name of function module since both are same.You will be able to view your smartform.
regards,
Nikhil Moghe -
My I phone has plenty of storage but will not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original form with the price or free on the right hand side.
Call 1-800-275-2273...ask to talk to "Customer Relations"...no one else.
Good luck. -
GRAND TOTAL SOULD BE DISPLAYED ON THE LOST PAGE OF THE SMART FORM
Hi friend,
i calculated the grand total value in my smart form, i want to display it in a smartforms lost page only can any one help me pls.
In my footer i gave the grand total in a separate line type and condition i gave only before end of main window check box activated but in every pages i got the grand total value.
kindly any one help me to accuire the exact value.
Thanks .
M.S.Amirtharaj Vijay.HI Vijay,
What Sowmya said is correct
check the table SFSY
and PAGENO holds current page no
FORMPAGES holds all page numbers
Check the condition like
SFYS-FORMPAGES > SFSY-PAGENO
or
SFYS-PAGENO > SFSY-FORMPAGES
any of above condition will work
Thanks
Surendra -
In Top Gap is coming after first page in print preview (SMART FORMS)
Dear Guru's,
I created the one smart forms with one main window with four secondry window in secondry window i have taken the logo,address subject and footer .
And in main window i had taken 10-15 text all second window and main window in my first page ,now my problem is that, in my second and third page at upper side some gap is coming i don't want that gap in my page.
I am thinking that gap is coming because of my other secondry window such as logo address and all but i need only these information at first page so i selected the only first page check box.
Kindly help me how to rmove the gap from the other pages which is coming in print preview .
thanksHi,
I think you should create a page next (then indicate first page to page next).
In page next, you copy main window of first page and resize as you want. Moreover, you can copy secondary windows in page first to next page that your want to show.
Hope this help.
Thien -
Text inversed in the smart form table
Dear all,
I'm new in ABAP and working on a smart form which has a cell in table shows an article description in both Arabic & English
but the Arabic text appears in reversed sequence in the print preview and after printing it shows like this ##### #########.
any idea how to solve this problem
thanksHello,
Please see the following SAP Note about printing Arabic:
587150 - Support of Arabic-script languages
For your Unicode system, then you should be able to print Arabic
characters via device type ARSWIN or device type SWINCF.
The Unicode cascading fonts solution with the device type SWINCF
described in the following SAP Note:
812821 - Cascading Font settings
So you need to configure a Frontend output device that uses device type
ARSWIN and use this to create the print with the Arabic characters.
Regards,
David -
Is it possible to get direct print without preview of the Smart Form?
Hi,
I developed a custom report where line items are coming with a check-box in front of each item. User can select single/multiple line-items by checking those check-boxes. The report also has a PRINT button in application tool bar by clicking which a Smart Form will be printing for each item. Thats mean, for 10 selected line items, 10 forms will be printed.
But, after clicking the PRINT button, print preview of the form is coming and from there I can go for a print/printer. I do not need the print preview and want to have the direct print option while clicking the PRINT button. How can I have this functionality?
Thanks in Advance
RoyHi,
Initially I get the Form Name by calling FM: SSF_FUNCTION_MODULE_NAME and I store it in l_fm_name. now calling the FM: l_fm_name like below:
LOOP AT i_item INTO wa_item.
CALL FUNCTION l_fm_name
EXPORTING
wa_item = wa_item
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDLOOP.
As I have multiple form need to print, I am calling the smartform in loop. -
Error in opening the PDF file created from the smart form output.
Hi All,
i have a simple smart form which takes 3 values like customer no, name and no of times customer called and gives an out like
Customer 0001000000 with name Ravi called 5 times today.
I have to send this output to mail as an attachment.
for this i am coding as below.
******Call the SSF Function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = Form name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = lv_fmname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
lv_partner_number = '0001000000'.
lv_name_org1 = 'Ravi'.
lv_z_no_calls_day = '5'.
lw_ctrlop-getotf = 'X'.
lw_ctrlop-no_dialog = 'X'.
lw_compop-tdnoprev = 'X'.
lw_compop-tddest = 'LP01'.
*******Call the Form Function module and get the OTF of form output
CALL FUNCTION lv_fmname
EXPORTING
name_org1 = lv_name_org1
partner_number = lv_partner_number
z_no_calls_day = lv_z_no_calls_day
control_parameters = lw_ctrlop
output_options = lw_compop
user_settings = ' '
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i_otf] = w_return-otfdata[.
*********Now here if i look in to the OTF data i got in debug it has the data i aniticipated along with some other data.
the output is in the format
TDPRINTCOM(2) TDPRINTPAR(70)
ST XXXX.. customer 0001000000 with
name.....
i have my data in the above format spread in three lines of the output otf table where XXXX... is some number.
***********To convert to PDF Format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = lv_len_in
BIN_FILE =
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
*********For testing purpose i created a file on the desktop with the the data in i_tline. it created PDF file but when i tried to open it it's giving an error.
i_objtxt = 'test with pdf-Attachment!'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name = 'Smart Form'.
wa_doc_chng-obj_descr = 'Frequent Caller Alert_Day'.
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + STRLEN( i_objtxt ).
*********Creating the Entry for the document
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
i_objbin] = i_tline[.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objhead = 'Frequentcaller list_Day.pdf'.
APPEND i_objhead.
************Creating the entry for the attachment.
CLEAR : i_objpack.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'ATTACHMENT'.
i_objpack-obj_descr = 'FCA'.
i_objpack-doc_size = v_lines_bin * 255 .
APPEND i_objpack.
CLEAR i_reclist.
i_reclist-receiver = 'mail id'.
i_reclist-rec_type = 'U'.
APPEND i_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = i_objpack
object_header = i_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
This is all i am doing.
It is sending a mail with the attachment but we are not able to open the attachment. it's giving an error like file is damaged and couldn't be repaired.
I serched in the forum but i couldn't get the answer.
I suspect there is a problem in getting the OTF data..
Please help me in resolving this issue....
Thanks in advance.
RKCheck the sample , and see where you made the mistake.
REPORT ZPDF_MAIl.
DATA:
w_fm_name TYPE rs38l_fnam,
w_bin_filesize TYPE i,
w_filesize TYPE i,
w_lines_txt TYPE i,
w_lines_bin TYPE i.
DATA:
wa_ctrlop TYPE ssfctrlop,
wa_outopt TYPE ssfcompop,
wa_objhead TYPE soli_tab,
wa_buffer TYPE string,
wa_doc_chng TYPE sodocchgi1.
DATA:
BEGIN OF t_mail_ids OCCURS 0,
mailid TYPE ad_smtpadr,
END OF t_mail_ids,
t_otfdata TYPE ssfcrescl,
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
t_pdf_tab TYPE tline OCCURS 0 WITH HEADER LINE,
t_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z195_TEST'
IMPORTING
fm_name = w_fm_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION w_fm_name
EXPORTING
control_parameters = wa_ctrlop
output_options = wa_outopt
user_settings = 'X'
IMPORTING
job_output_info = t_otfdata
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = w_bin_filesize
TABLES
otf = t_otf
lines = t_pdf_tab
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF. " IF sy-subrc EQ 0.
LOOP AT t_pdf_tab.
TRANSLATE t_pdf_tab USING '~'.
CONCATENATE wa_buffer t_pdf_tab INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
t_record = wa_buffer.
APPEND t_record.
SHIFT wa_buffer LEFT BY 255 PLACES.
IF wa_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
t_objtxt = ' To Change the COR, Use the Transaction ZCOR_CHANGE'.
APPEND t_objtxt.
t_objtxt = ' Check the Attached PDF file for COR'.
APPEND t_objtxt.
DESCRIBE TABLE t_objtxt LINES w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
wa_doc_chng-obj_name = 'COR Display'.
wa_doc_chng-expiry_dat = sy-datum + 10.
CONCATENATE 'COR' "w_cornr
'-' "w_stat_descr w_action_desc
INTO wa_doc_chng-obj_descr SEPARATED BY space.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = w_lines_txt * 255.
CLEAR t_objpack-transf_bin.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
t_objpack-body_num = w_lines_txt.
t_objpack-doc_type = 'RAW'.
APPEND t_objpack.
t_objpack-transf_bin = 'X'.
t_objpack-head_start = 1.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
DESCRIBE TABLE t_objbin LINES w_lines_bin.
READ TABLE t_objbin INDEX w_lines_bin.
t_objpack-doc_size = w_lines_bin * 255 .
t_objpack-body_num = w_lines_bin.
t_objpack-doc_type = 'PDF'.
t_objpack-obj_name = 'COR'.
t_objpack-obj_descr = 'COR Test'.
* concatenate 'COR' w_cornr into t_objpack-obj_descr
* separated by space.
APPEND t_objpack.
*LOOP AT t_mail_ids.
CLEAR t_reclist.
t_reclist-receiver = 'INTENATEMAIL'.
t_reclist-rec_type = 'U'.
APPEND t_reclist.
*ENDLOOP.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = t_objpack
object_header = wa_objhead
contents_bin = t_objbin
contents_txt = t_objtxt
receivers = t_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc EQ 0.
ENDIF.
Maybe you are looking for
-
Trying to create a simple database program.....help, please
I am trying to create a database and I am having trouble gettig my code correct..........I think I am on the right track but I haven't a clue from this point, can anyone point me in the right direction as far as getting my program to have a master fi
-
Error in creating perfstat user for statspack
Hi Friends, DB: 11.2.0.2, SE and 64 bit OS: RHEL 5.7 My DB is on SE and hence i cannot use the diagonistic pack so when i am trying to use Statspack for the same, i am facing the following error when i am trying to create Perfstat user. SQL> @?/rdbms
-
i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those ima
-
Rejected Business Partner Disappears
Hi, When a business partner is rejected via workflow, the business partner data totally disappears from the system. If I try to look up the BP info, I get the message "Business Partner does not exist." Is there any way to keep the BP data in the sy
-
HI, I created a subcontracting PO . Then i need to do delivery through ME2O transaction. BUt i am not able to see the material for which i created the subcontracting Purchase order . PLease suggest what must be the problem . Is there any customising