Sub pictures can't be seen on DVD

I've created a project in Encore CS3 and everything works properly in preview. However, when I burn a DVD the rollovers (sub-pictures) are not visible. The DVD will work properly on my laptop but not in a DVD player. I've tried both DVD-R and DVD+R blanks. Thanks for any assistance.

Please tell us a bit more about the Menu used, and the Buttons' Sub-picture Highlights. A screen-cap of the Menu in PS, or the Menu Editing Panel, with the Layer Sets opened will be very helpful.
Also, what brand of blank media are you using?
That you get correct Highlights on the Computer, but not on the set-top player might indicate an issue with the burned DVD and the set-top player. Problems can come from using media, like Memorex, TDK and store brands.
Still, there might be something in the Button Layer Sets' Sub-picture Highlight Layers, and the screen-cap should rule those out quickly.
Good luck,
Hunt

Similar Messages

How do I save my video in jpeg format so I can add picture to it and burn a DVD through Photo Explosion version 4

How do I save my video in jpeg format so I can add picture to it and burn a DVD through Photo Explosion version 4

LRP
Thanks for the follow up.
In Premiere Elements 13/13.1, your export choices are in the Publish+Share section of the project. There are several choices and sub-choices.
Example: Publish+Share/Computer/and then a list of choices under that, such as, MPEG, AVI, AVCHD, XAVC-S, Windows Media, QuickTime, Image, Audio.
And each has Presets which define the export settings. Adobe offers default settings which are usually optimized ones. But, it also allows you to customize the preset selected. You do that by clicking on the Advanced Button of the selected preset and customizing the settings under the Video Tab, Audio Tab, and, if applicable, Multiplexer Tab.
From what you wrote, I thought that you might be asking about exporting a video with a video codec = Photo JPEG.
To do that you would to to
Publish+Share
Computer
QuickTime
with Presets = either the one for 4:3 of 16:9 as appropriate for your project,
and then clicking on the Advanced Button, and then the Video Tab under the Advanced Button.
Then selecting Photo JPEG for the video codec field.
Tip: The QuickTime choice is not seen unless you scroll down the list of Computer choices. Use the thin scroll bar to the right of the Computer choices.
Please explore Premiere Elements 13/13.1's Publish+Share/Disc/DVD with standard or widescreen preset for your creation of the DVD-VIDEO on DVD disc.
The Premiere Elements timeline destined for this choice could consistent of supported photos and or videos.
Please consider.
Any questions and need clarification, please do not hesitate to ask.
ATR

Sub Picture Problems HD project to SD build/burn for DVD Menu

Encore CS5 on OSX
Created a project for HD Blu-Ray that has sub pictures for buttons that work wonderfully when built and burned on Blu-ray, but when I use the same project and build and burn to SD DVD, the sub pictures are visible as horizontal lines with no chroma. This issue is prevelent in stand alone players, both blu-ray and DVD, but when played in the computer DVD player they are fine. Any ideas on how to fix this?
Thx

Thanks, yes I kept the same HD menus and output to DVD.
>>> Bill Hunt <[email protected]> 06/09/10 5:38 PM >>>
Welcome to the forum.
Did you keep the same HD Menus, and just Output to DVD, or did you alter your Menus for the SD Project?
Can you post a screen-cap of your Menu in PS, with the Layers Palette open, so that we can see the look of the Sub-picture Highlights?
Good luck,
Hunt

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

Iphoto 9.2.1 leopard scrapbook theme not working correctly. THe opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there. It works fine in LION "only 1 image" on opening slide.

Hi.
iphoto 9.2.1 on iMac Leopard "scrapbook theme" not working correctly.
The opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there.
It works fine in LION "only 1 image" on opening slide.
All updated. Any suggestions
Thanks in Advance

Hi.
iphoto 9.2.1 on iMac Leopard "scrapbook theme" not working correctly.
The opening slide has 2 pictures; the bottom one can barely be seen and probably shouldn't be there.
It works fine in LION "only 1 image" on opening slide.
All updated. Any suggestions
Thanks in Advance

Version 3 can't be seen by iTunes or iTV to share pictures

Since I upgraded to Version 3 my database can't be seen by iTunes or iTV to share pictures. It says that I need to set preferences to share pictures. I have it configured that way. Help please.
Randy

Check Aperture Preferences and make sure Share previews with iLife and iWork is not set to Never.

I want to burn dvds so they can be seen on dvd player, i want to burn dvds so they can be seen on dvd player

IDVD is no longer available so what is best to use to burn i movies to DVD so as they will be seen on DVD players?

Export them from iPhoto:
File -> Export
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
to a folder on the desktop.
Burn that to disk with the Finder's Burn command.

Why is the button sub-picture on all the time?

I have been told to create a menu with just one button on it... PLAY.
Don't ask me why. I think it is weird too...
I insert the DVD in the player, menu appears, and, a fraction of a second later, the sub-picture comes on.
Same thing happens in PREVIEW and on an actual burned DVD.
"Automatically Route Buttons" is OFF.
"Default Button" is set to NONE.
It is just a small annoyance, but I'd like the user to see the sub-picture go on and off as they move the cursor.
Anybody have any idea what I can do?
JP

When you have one button, it is the default. And it is always "selected," because there is no other button. On a two button menu, the selection doesn 't ever go off, it goes from one to the other.
You could make an invisible button, set it so no highlights ever show, and make it the default.
But as soon as your button get selected, it won't go back "off" until the other button is selected.
Remember too that cursor movement (i.e. mouse over effect) is only on the computer; on a TV, the remotes moves to the options.

Sub Picture problem in Encore CS6

I am working on my first bluray project. I made the Menu for Encore as I have make many in Photoshop.
The video is 1280 x 720 so I made the Menu 1280 x 720.
The problem is with the Highlight layers, but not all of them.
Here is a composite of 3 screen shots of a preview of the menu in Encore.
The top shows the left most button the Highlight shows only 3/4 of the button.
The middle shows how middle three buttons work fine.
The lower section shows the second from the right button, it does not work fully and part of the 6th button is on.
When I let Encore create a sub picture the same thing happened.
I have made sure that the GROUP boundaries do not over lap. I have moved the 1st, 5th and 6th button further away from each other but it still happens.
Anyone have any ideas?
Thanks

I know this is old but just in case someone sees this and has the same problem. I am using 5.5 and I found this same issue. Upon playback before making it a dvd, portions of the highlight boxes were gone. The 4th outline of the box was not appearing. My project was a 2 dvd set and I had saw this problem in the first dvd and was going to find the answer but ended up burning it to dvd and the boxes looked as they were supposed to. Very strange but glad that it worked.

Can't burn photos to DVD - iPhoto 5.04

Greetings,
I asked this long ago, but has anyone succesfully figured out how to burn discs with iPhoto 5.04?
I've seen many discussions on subject, but has it ever been resolved? prior versions seemed to work fine, all I ever get now is the "Finishing Burn" dialog.
Does iPhoto 6 resolve this?
Any help would be appreciated!
Thanks,
Jim

Can you play DVD movies on the drive? I ask because it is not uncommon for one feature on multifunction drives (like a CD-DVD drive) to stop functioning. There are actually multiple lasers in there for the separate functions. In other words the CD part can work fine but the DVD part go bad.
Is this an external DVD burner or the one built into the laptop?

Why might some sub-picture hilights be partially obscured?

I create a sub-picture or use a standard sub-picture hilight (e.g. the music notes from the "Blue Notes" video button template). Using say 3 or 4 of this same hilights on a Menu. They appear to be complete and look perfect when previewed. But when burned to a DVD, often one or more of these sub-pictures will be partially blocked out in appearance. I have worked through all obscuring possibilities. I have ensured that buttons boundaries are well away from each other. I have checked the menus in photoshop and ensured that the offending hilight's group is top level. There appears to be no invisible blockages. Yet like I say - all appears fine in Encore preview, but when watching the DVD, one or more buttons will still be partially blocked. All buttons continue to work perfectly.
I have spent many hours without solving this, so any thanks for reading - any clue would be really welcome.
David

This THREAD might be useful, but not so much as the other two.
Still searching for an earlier thread and will link to it, when I find it.
Good luck,
Hunt

PICTURES ARE FUZZY WHEN IMPORTED TO DVD DISC

I'm new to creating dvds. Pictures are fuzzy when imported to dvd disc ( memorex DVD-R). What am i doing wrong?

Hi
Hard to say as You don't suply any info on
• What photo file format, size You use
• How You go from photo to iDVD
And ! - Please do not Yell ! - Capitalized letters = Yelling in most forums and here a low and polite conversation most often will get better and more rapid results.
Some thoughts about DVD Quality
• DVD can only be SD-Video what ever tool used to encode it. And that is much less than what Your Mac screen can show.
• Tools used to create the SlideShow - give a very different (quality) result
iMovie'08 to 11 - discard every second line = less resolution
iMovie HD6 and FinalCut - full interlaced video over to iDVD (as good as it can be)
FotoMagico™ _ Great and even more so if result is burned as a Blu-Ray Disk
Some notes follows - if You are of interest.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
Yours Bengt W

My bookmark icons can be fully seen in bookmark toolbar. But on the address bar and on tab most of the icons are blank and when I open most of the websites, their icons are also blank, too. I've already reinstall the firefox 3.6.3 but it is the same. Plea

My bookmark icons can be fully seen in bookmark toolbar. But on the address bar and on tab most of the icons are blank and when I open most of the websites, their icons are also blank, too. I've already reinstall the firefox 3.6.3 but it is the same. Please help me. Some of the websites show thier icon normally.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3

Yes, it doesn't work. I ran in safe mode. nothing changed. I uninstalled Mozilla firefox with only standard removal, no change. I finally uninstalled Mozilla with complete removal and reinstalled it, then it return to normal. Why does this happen? Thanks for your reply.

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

Item created at site level can not be seen in other responsibilities

Hi,
I've made changes to one of the iProcurement pages.
I added an item (type : Tip) at the site level . The context is as follows:
scope : page
site : include
organization : A
responsibility : B
The Tip item's rendering properties are as follows:
Site : True
Organization : Inherit
Responsibility : Inherit
Now, I go to another responsibility C and when I looked for this item, it can't be seen.. The item could not even be searched in the personalizations page.
The context for this as follows:
scope : page
site : include
organization : D
responsibility : C
I just want to know that when an item created at site level should be seen by all the responsibilities right?
why is that it is not getting displayed here?
Thanks in advance

Hi Ram,
I could clearly see that the item got created at site level.
The function in the context window is left blank.
site: include
organization : A
responsibility : B
I could see the item in the B responsibility.
But when I go to some other responsibility ( with a different organization), I could not see the item.
This page I'm talking about is NonCatalogShoppingPG (iProcurement).

Sub pictures can't be seen on DVD

Similar Messages

Maybe you are looking for