SUB: Problem in executing RSA1 TC in BIW
Hi Friends,
I am new to this forum, i need help for the following scenario.
Please follow the flow
Actually i have installed R3 4.7 and BW3.0 in two different servers(systems) and after that as a part of integration from R3 to BW i have executed the following transaction successfully.
Here initially i have logged into R3 using the following login details.
Client ID: 800
UID: SAP*
P/W: 06071992
Executed TC SU01 to create a user
Transaction Codes:
SALE, SCC4, SM59.
And from BW to R3
Here initially i have logged into BW using the following login details.
Client ID: 000
UID: SAP*
P/W: 06071992
Transaction Code
(am not sure about the transaction code which i have executed here to create client 800)
Saved settings
logged out and logged in back using the following login details.
Client ID: 800
UID: SAP*
P/W: PASS
Executed TC SU01 to create a user
Executed SCCL TC
Selected "SAP_ALL" profile
source code as 000
Clicked on start immediately
Selected "Source client user masters" as 000
Appeared verification screen->pop up screen->clicked on continue.
Executed SM59 TC
When tried to execute RSA1 TC got a message saying "client must 000"
Then i logged in back using the following details.
Client ID: 000
UID: SAP*
P/W: 06071992
Now again i tried to execute RSA1 TC the i got the message saying "BW cannot use client 000".
Many thanks for your help.
Regards,
Lucky
dont duplicate the thread all over the place. your question has nothing to do with ITS.
Raja
Similar Messages
-
Problem in executing RSA1 TC in BIW
Hi Friends,
I am new to this forum, i need help for the following scenario.
Please follow the flow
Actually i have installed R3 4.7 and BW3.0 in two different servers(systems) and after that as a part of integration from R3 to BW i have executed the following transaction successfully.
Here initially i have logged into R3 using the following login details.
Client ID: 800
UID: SAP*
P/W: 06071992
Executed TC SU01 to create a user
Transaction Codes:
SALE, SCC4, SM59.
And from BW to R3
Here initially i have logged into BW using the following login details.
Client ID: 000
UID: SAP*
P/W: 06071992
Transaction Code
(am not sure about the transaction code which i have executed here to create client 800)
Saved settings
logged out and logged in back using the following login details.
Client ID: 800
UID: SAP*
P/W: PASS
Executed TC SU01 to create a user
Executed SCCL TC
Selected "SAP_ALL" profile
source code as 000
Clicked on start immediately
Selected "Source client user masters" as 000
Appeared verification screen->pop up screen->clicked on continue.
Executed SM59 TC
When tried to execute RSA1 TC got a message saying "client must 000"
Then i logged in back using the following details.
Client ID: 000
UID: SAP*
P/W: 06071992
Now again i tried to execute RSA1 TC the i got the message saying "BW cannot use client 000"Hi Friends,
I am new to this forum, i need help for the following scenario.
Please follow the flow
Actually i have installed R3 4.7 and BW3.0 in two different servers(systems) and after that as a part of integration from R3 to BW i have executed the following transaction successfully.
Here initially i have logged into R3 using the following login details.
Client ID: 800
UID: SAP*
P/W: 06071992
Executed TC SU01 to create a user
Transaction Codes:
SALE, SCC4, SM59.
And from BW to R3
Here initially i have logged into BW using the following login details.
Client ID: 000
UID: SAP*
P/W: 06071992
Transaction Code
(am not sure about the transaction code which i have executed here to create client 800)
Saved settings
logged out and logged in back using the following login details.
Client ID: 800
UID: SAP*
P/W: PASS
Executed TC SU01 to create a user
Executed SCCL TC
Selected "SAP_ALL" profile
source code as 000
Clicked on start immediately
Selected "Source client user masters" as 000
Appeared verification screen->pop up screen->clicked on continue.
Executed SM59 TC
When tried to execute RSA1 TC got a message saying "client must 000"
Then i logged in back using the following details.
Client ID: 000
UID: SAP*
P/W: 06071992
Now again i tried to execute RSA1 TC the i got the message saying "BW cannot use client 000" -
Hi everyone,
I have an URGENT issue, cannot execute RSA1.
Already modify WE20 with the missing entry (BWDCLNT700, LS) but in table RSBASIDOC I dont see it.
When I execute RSA1 display the same error and delete from WE20 the new entry.
Please help me to solve this!!!
<b>Entry in inbound table already exists
Message no. E0412
Diagnosis
Inbound parameters already exist in the partner profile under the following key:
/BWDCLNT700/LS//RSSEND////
This relates to the key fields in table EDP21:
SNDPRN Partner number
SNDPRT Partner type
SNDPFC Partner function
MESTYP Message type
MESCOD Message code
MESFCT Message function
TEST Test indicator
Procedure
Please check the EDI partner profile.</b>Hello All,
HERE THE RELEVENT ANSWER:
I found solution for this error.
1. Go to WE20 and check whether Partner profile T90CLNT090 exist in LS type,if not just add Parnter profile with same and save.
Partner profile Name: T90CLNT090
TYPE: LS
Give:
Ty: US
User: User Name
Lang: EN
and Save.
2. Again re-click on Partner Profile: T90CLNT090
you will see ,there will be some entries in Inbound & out Bound Tabs.
Delete the following from outbound:
1.RSRQST
Delete the following from inbound.
1.RSINFO
2.RSSEND
and save your partner profile.
3. now execute - RSA1, it will ask to active Workbench. Just activate it . it will work now.... Cheers.
Regards,
K.Ramesh
Note: Please give some points ,if it solves your problem. -
Re: [iPlanet-JATO] Experiencing problem while executing model.
Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed] -
Problem While Executing T.CODE DP90
Hi,
We have Upgrade our system from 4.6C to ECC6.
We are facing following problem while executing Resource Related Billing request
Through Transaction code DP90.
Process.
1. We are creating Sales Order and system will create Service order automatically as per the configuration.
2. In service order we have External as well internal operations ,
Internal operations will be confirmed through IW41, and External Operations we are creating Purchase Requisition then creating PO and MIRO,
After all Operations confirmed we will make Service order status as technically completed, then we are executing DP90 for Resource Related Billing, System will determine the material, combination of Cost element and Activity Type (Which is configured in T.Code ODP1) For External Operations System is Considering Activity Type for material determination in 4.6c but it is not considering Activity Type for Material Determination in ECC6 for External Operations.
Please Help me,
Edited by: D B on Apr 29, 2008 6:13 PMHi Prashanth,
Thanks for your reply, but all activity are valid in current period, in our Scenario in the old system for External Operations with combination of Activity type and Cost element system is determining material but where as in the new system for external operations it is not considering the Activity type and system is determining the material in the combination of Cost element and Blank activity type so, we are getting different material in DP90. -
Problem in executing the adobe form
Hi,
Using the SFP tcode i have createda an interface and a form for that interface.
i have to import parameters from vbap table which i have mapped in the form..there is no problem while executing and activating the form...
but while i am executing the form after passing the values i am getting an exception : SYSTEM ERROR
Meassage ID: FPRUNX
ADS: SOAP Runtime Exception: CSoap Exception Transport.
Are the forms craeted using SFP tcode are Standalone forms i.e. non-interactive forms?Hi friend,
Its not like that the Adobe created using SFP is non interactive.
We can create interactive forms using SFP transaction using java code.
I think it will be the problem with ADS just check with your basis people i think they will configure you the settings which works fine.
To check whether the settings are perfect you can try executing the standard programs FP_TEST_00 and
FP_PDF_TEST_00. If it works fine then some other problem exists else check with your basis team.
Just check this and revert me if you have any issues. I will help you
Thanks,
Sri Hari -
Problem in executing JFCunit test case
Hi all,
I have problem in executing a simple test case that checks for input blank fields entered.
Below is the code for the test class that i am trying to run, but i am unable to execute it. Please can anyone try to resolve this.
package unittest.com.erp;
import junit.extensions.TestSetup;
import junit.extensions.jfcunit.*;
import junit.extensions.jfcunit.finder.*;
import junit.extensions.jfcunit.eventdata.*;
import junit.framework.Test;
import junit.framework.TestSuite;
import junit.textui.TestRunner;
import com.erp.client.swing.ClientLoginDialog;
import com.erp.client.swing.workspace.ClientWorkspaceFrame;
import com.erp.client.swing.workspace.data.LoginResults;
import javax.swing.*;
public class LoginScreenTest
extends JFCTestCase {
private ClientLoginDialog loginScreen = null;
private JButton login = null;
private JButton cancel = null;
private JTextField username = null;
private JTextField password = null;
private JFCTestHelper helper = null;
LoginResults loginSuccess = null;
ClientWorkspaceFrame workspaceFrame = null;
public LoginScreenTest() {
public LoginScreenTest(String name) {
super(name);
public static Test suite() {
return new StartApp(new TestSuite(LoginScreenTest.class));
private static class StartApp
extends TestSetup {
* Construct the test decorator, which starts the application *
* @param test
* Test case.
public StartApp(final Test test) {
super(test);
* Start the LoginScreenTestapplication.
public void setUp() {
new Thread(new Runnable() {
public void run() {
try {
new LoginScreenTest().setUp();
} catch (Exception e) {
}).start();
try {
Thread.currentThread().sleep(10000);
} catch (InterruptedException ex) {
* Tear down the LoginScreenTest application.
public void tearDown() {
protected void setUp()
throws Exception {
super.setUp(); // Choose the text Helper
setHelper(new JFCTestHelper()); // Uses the AWT Event Queue.
// setHelper( new RobotTestHelper( ) ); // Uses the OS Event Queue.
ClientWorkspaceFrame workspaceFrame = ClientWorkspaceFrame.getHandle();
// loginScreen = new ClientLoginDialog( "LoginScreenTest: " + getName());
loginSuccess = ClientLoginDialog.login();
loginScreen = ClientLoginDialog.login(new JFrame(), true);
if (loginSuccess != null && loginSuccess.isSuccess()) {
workspaceFrame.initFrame();
workspaceFrame.loggedInUser = loginSuccess.getName();
workspaceFrame.loggedInFullUserName = loginSuccess.getFullLoginUserName();
workspaceFrame.loggedInUserPassword = loginSuccess.getPassword();
workspaceFrame.setVisible(true);
workspaceFrame.validate();
flushAWT();
protected void tearDown()
throws Exception {
login = null;
cancel = null;
username = null;
password = null;
loginScreen = null;
flushAWT();
// getHelper.cleanUp( this );
super.tearDown();
public void testInitialState() {
NamedComponentFinder finder = new NamedComponentFinder(JButton.class, "Cancel");
finder.setName("Cancel");
JButton exitButton = (JButton) finder.find(loginScreen, 0);
assertNotNull("Could not find the Exit button", exitButton);
NamedComponentFinder finder1 = new NamedComponentFinder(JButton.class, "Login");
finder1.setName("Login");
JButton enterButton = (JButton) finder1.find(loginScreen, 0);
assertNotNull("Could not find the Enter button", enterButton);
getHelper().enterClickAndLeave(new MouseEventData(this, enterButton));
assertEquals("", workspaceFrame.loggedInUser);
assertEquals("", workspaceFrame.loggedInUserPassword);
public static void main(final String[] args) {
TestRunner.run(LoginScreenTest.suite());
Thanks & Regards,
VishalMessage was edited by:
vishal_vj
Message was edited by:
vishal_vj
Message was edited by:
vishal_vj
Message was edited by:
vishal_vjhi All,
can any one guide me how to run the test casese in JFCunit ? as when i tried to run thru command prompt its not recognising the main class at all.
Now i m trying with eclipse problem here is that it is showing error to this line of code
DialogFinder dFinder = new DialogFinder(loginScreen);
error is constructor is undefined?
So looking for some solution.
with regards
kin -
Problem in executing a javascript link on a jsp page
I am having a problem in executing a javascript function from a link. For example if i click some link let say Discover and behind the scene some applet method is supposed to be called, but it is not called? However the the function name comes in the url area (address bar of internet explorer) like javascript:document.switchApplet.discover()
Can anybody help me solving this problem?
Moreover, just for a hint, i think i have deleted some registery value of such time so that's why it is not working. But i am not sure.what is d error u r getting ???
Is it java script error? yes then u can find the line no.
view the source code or ur page and find whether ur .js is including properly or not? means whether the path is correct ? -
Problem in executing EXE from browser-URGENT
Hi all,
I am facing a problem in executing "c exe" file from my web based application, iam using IAS
on Solaris. my program is able to catch the path but its not executing (this is wirking fine in windows) i am giving a sample code here
Runtime rt=Runtime.getRuntime();
Process pro=rt.exec("/datadisk1/java/runsol.exe");
pro.waitFor();
runsol.exe will generate s text file when executed, when i run this in a independent java program then it is executing, on browser it is not executing and output text file is not creating.
Note: i am working on Solaris / Oracle AS 9i
Thanks
Bye.Security issue. Calling .exe from applet not possible by default.
-
Hi all,
I am getting an error I can't solve until now.. Who can help?
The Default Trace in the EP 7.0/NWA gives the following information:
Severity: Error
Message: Problem in executing function module:[date]:com.sap.mw.jco.JCO$AbapException: (126) ERROR_IN_PDO: ERROR_IN_PDO
Category: /uwl/service
Location: com.sap.netweaver.bc.uwl.core.connect.abap.FunctionModuleActionHandler
Application: sap.com/tcwddispwda
The UWL connection tests are correct! So, who can help!
There is nothing to find in sap notes or sdn forum
Best regards,
G. LeursHi john,
I am also facing hte same issue.
when the user is trying to approve the Compleated shopping cart from the button availble in the UWL preview , I am getting the below error.
Exception type:com.sap.netweaver.bc.uwl.connect.ConnectorException Message:Wed Aug 25 12:16:52 CEST 2010 (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Wed Aug 25 12:16:52 CEST 2010 (Connector) :com.sap.mw.jco.JCO$AbapException:ERROR_IN_PDO
we are not passing any ABAP role from teh SRM system.
it would be great if you can share your views regarding this.
Raji -
Expdp problem when executing from pl/sql transportable tablespaces
Hello
i have a very strange problem for which your assistance is really appreciated. i am applying the transportable tablespaces approach and i have a problem when executing expdp from commandline in comparison to the procedure generated to make the exact same thing.
more precisely when running:
expdp etl/etl dumpfile=TBSP090609_DMP.dmp logfile=TBSP090609_DMP.log directory=EXPDP transport_tablespaces=TBSP090609 transport_full_check=y
the dmp file produced is over 200MB.
when runng the below pl/sql code the volume produced is around 50MB. any idea what i am missing?
job_handle :=
dbms_datapump.OPEN (operation => 'EXPORT',
job_mode => 'TRANSPORTABLE',
job_name => 'export_tablespace',
VERSION => 'COMPATIBLE'
dbms_datapump.add_file (handle => job_handle,
filename => dump_file_name,
DIRECTORY => export_dir_name
dbms_datapump.set_parameter (handle => job_handle,
NAME => 'TTS_FULL_CHECK',
VALUE => 1
dbms_datapump.metadata_filter (handle => job_handle,
NAME => 'TABLESPACE_LIST',
VALUE => '('''
|| tablespace_name
|| ''')'
dbms_datapump.start_job (job_handle);thanx you for your response. the problem was eventually managed to be resolved as follows:
job_handle :=
dbms_datapump.OPEN (operation => 'EXPORT',
job_mode => 'TRANSPORTABLE',
job_name => 'export_tablespace',
VERSION => 'COMPATIBLE'
dbms_datapump.add_file (handle => job_handle,
filename => dump_file_name,
DIRECTORY => export_dir_name
dbms_datapump.set_parameter (handle => job_handle,
NAME => 'TTS_FULL_CHECK',
VALUE => 1
dbms_datapump.metadata_filter (handle => job_handle,
NAME => 'TABLESPACE_EXPR',
VALUE => 'IN('''
|| tablespace_name
|| ''')');
dbms_datapump.start_job (job_handle); -
Hi all,
There is a error when I execute RSA1 using my accounts in BI 7, but there is no error when I execute other T-code, and it can not occur error when I use other's accounts, why? What can I do?
The error in blow:
Runtime Errors STORAGE_PARAMTERS_WRONG_SET
Short text The system is configured incorrectly.
u2026u2026
u2026u2026
u2026u2026
Best Regards & Thanks!Hi.........
Check the memory status in DB02...... if its consuming too much of memory. refresh/free unwanted memory.......It also depends upon the workload on the system when you execute the system.Analyse this using tcode ST03/STAD.
Thirdly, again check the system profile parameter :
abap/heap_area_dia
abap/heap_area_nondia
If nothing works........contact the Basis people......
Regards,
Debjani..... -
Facing Problem while executing a command through WLST
Hi,
Iam using Weblogic 11g(10.3.2).Whenever I execute the below command in WLST on windows it is working fine.
reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hostname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idmhost1")
But whenever i execute the same in Linux,it is throwing the error as below:
wls:/base_domain/serverConfig> reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hoistname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idm1")
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: reassociateSecurityStore
Please suggest....
Regards
PavanFacing Problem while executing a command through WLST
-
Problem while executing the transaction code FMBV (Reconstruct)
We are facing a problem while executing the transaction code FMBV
(Reconstruct Availability Control in Funds Management) in it when we
execute this transaction system only updates the expenditure which is
made before technical upgrade from 4.6c to ECC6 EHP6, against the
Assigned Budget (KBFC budget type) in the Annual Budget Table (BPJA)
and
the expenditure which we made after the upgrade, the program just
ignore
it. We can also see the expenditure in the standard FBL3N report.
Please guide us.
Thanks and Best Regards,Dear Abrar
In your description, you refer to missing update after an upgrade. First of all, see if table FMIT is consistent, as it is the basis for calculating the assigned values during AVC reconstruction.
Refer to this note:
977016 FMIT: Missing totals records in Funds Management And perform following steps:
1.- Run program RGZZGLUX
2.- Run program RFFMRC04 to match totals table with line items. A test run after a successful effective run should not find inconsistencies.
3.- If RFFMRC04 does not show more inconsistencies, run FMBV as final step.
Note that this reconstruction must be done without any other budgeting/posting activities at the same time, otherwise you may cause other inconsistencies.
Please let me know the results.
Best regards,
977016 - FMIT: Missing totals records in Funds Management
Symptom
After the upgrade to ERP 2004 or higher you realize that the FMIT totals table is no longer updated in Funds Management. You start the RFFMRC04 report to reconstruct the totals, but the report still displays the missing totals after an update run.
Other Terms
FMIT, EA-PS, ECC 5.00, ECC 6.00, ECC 7.00
Reason and Prerequisites
This problem occurs due to a generation error.
Solution
Start the RGZZGLUX report to generate missing source code in FI-SL. Then start the RFFMRC04 report to reconstruct the totals, now another run of the report should no longer display any errors. -
Facing a small problem while executing WDA application from portal
Hi Experts,
I developed web dynpro for ABAP application and placed table UI control, which contains 270 records. Executing from SE80, it is working fine and showing clearly all records.
This application integrated in portal, while executing this applicaiton from portal, it is working fine and showing all records.
Here I facing a small problem i.e Pager ( footer area ) of table.
When the table is displayed there are the small box in the below of the table showing ROWS 244 of 270.
244 will be available in a small box. this 244 is not showing clearly, while executing from portal ( last digit 4 displying half part only). but 244 showing clearly while executing from SE80.
Kindly suggest how to resolve this problem.
Thanks & Regards
SridharHi Gopi Krishna,
Thanks for your time. From SE80, it is working fine and showing clearly row number. There is no property for increase width of small box, which contains current row number).
Facing problem while executing from portal.
Thanks & Regards
Sridhar
Maybe you are looking for
-
i upgraded to lion when it first came out but today i tried to open my photoshop cs2 and its telling me the powerpc applications are no longer supported is there any fix out there for this
-
I recently cracked the bottom part of my iPhone 5 right by the home button, would it be beneficial to put a screen protector over the cracks so it won't break anymore? I've cracked it twice now and can't afford to fix it again
-
Searching task from API by process instance id
Hi, I am having problem retrieving tasks by process instance id throught API. I've look at the help, http://help.adobe.com/en_US/livecycle/9.0/programLC/help/index.html, it got sample code to retrieve tasks, it retrieve all tasks by process name, but
-
Hooking up 17" LCD Flat Panel Apple Monitor to an older G4
I have an older G4 and bought a 17" LCD Flat Panel Apple Monitor Studio Display to use with it. However, the plug from the monitor doesn't fit into any of the G4 connections. Am I crazy? I thought these monitors were created for the G4s. I tried the
-
Vendor Login ID and Vendor Password?
I am totally new to this adobe reader software. Today has been frustrating because I bought a book through google play, and cannot move it to my e-reader because I can't seem to login to authorize the software. I tried my google ID and password becau