Sub-report link doesn't work at run-time

We have a main report and a sub-report linked to main-report. On clicking the sub-report link in the CR 2008 designer, sub-report page with data is rendered properly. Same doesn't work programmatically at run-time using Java SDK library (JRC). Any thoughts/suggestions?

Hi,
I am facing same problem. Please help.
Thanks,
Chanchal

Similar Messages

Error In ECC For Crystal Report Containing Sub-Report Link

Hi,
We are using Crystal Reports 2013. We extracted a Crystal Report from SAP ECC to modify it further utilizing the features of Crystal and export it back to SAP ECC.
The updated Crystal Report has a Sub-Report link within it, while exporting it back to SAP ECC, we get the attached error message as "layout.subreport should not contain any data connections".
However, on removing the Sub-Report link, the report can be successfully exported back to ECC and executes without any issues.
Is there any limitation on features to be used when exporting Crystal Reports to ECC?
Thanks & Regards,
Mitalee

Hi
I am facing the same issue when I try to open Crystal report Olap Grid via .net Crystal Report Viewer.
Getting the error message like not able to open OLAP Cube.
Please need urgent solution
Thanks a lot,
Usha

Sub report linking definition based on result, not on parameter value

Dear all,
I have created a report with CR 2008 SP6. The parameters from the referring BI query are period and customer. After the user enter parameter values, the report provides then Customer and product information.
I have add a sub report with additional information for product. I can transfer the parameter value (user input) for Customer to the sub report, but not for product, due to the fact that in the main report Product is not selected as parameter, but is a result set after the report is executed.
Is there a way to define in the Sub report linking exactly these result values of Product as new parameter for the sub report.
In the sub report linking definition I only see the possibility of defining the parameter as linking object, but not the report result set. See also the screenshot.
Any idea would be great. Best regards,
Stefanos from Munich/Germany

Hi Stefanos,
Where is the Subreport placed on the report?
Do you have a prompt in the Subreport for 'product'?
If yes, then here's open the 'Change Subreport Links' window > Move the Product field to the Pane on the right > From the drop down at the bottom left that says 'Subreport parameter field to use', choose the Product prompt.
If you don't have a prompt for product in the Subreport, then just move the Product field to the Pane on the right > From the drop down at the bottom right that says 'Select data in Subreport based on field', choose the Product field from the drop-down.
-Abhilash

How to I set an internal link in a PDF document using Preview? After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided.

How to I set an internal link in a PDF document using Preview? After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided via the Help menu other than it showing the pull-down menu selection to make.

No. I am able to use the other features such as underlining, highlighting, adding rectangles and oval and save those changes.

Personalize link doesn´t work

Hi Everybody,
I´m getting an access denied error when I click on the Personalize link in the portal masthead iview. This is what I did:
1) I copied the eu_core_role.
2) I copied the personalize workset.
3) I deleted the home content in the new eu_core_role.
4) I assigned the new personalize workset to the new eu_core_role as a delta link.
5) I assigned the new eu_core_role to users and user groups.
6) I checked the end user permissions for these users and user groups.
After these steps, the link doesn´t work.
We´re on Netweaver Portal SP14.
I tested the Personalize link with the portal URL fully qualified (DNS) and not fully qualified (just hostname).
Can somebody help me?
Thank You very much for Your help.
Regards.
SS.

Hi again,
Another question:
After I assigned the new eu_core_role to users and user groups, the tool area search doesn´t work. It shows an access denied error, too. This error seams to be related to changes on eu_role, isn´t it?
The tool area search and the Personalize link only work with administrators (users with admin roles).
I´ll appreciate Your help.
Regards.
SS.

JDeveloper 10.1.3.4 download link doesn't work.

Have anyone downloaded new version of JDeveloper (10.1.3.4) ? Download link doesn't work for me.
http://www.oracle.com/technology/software/products/jdev/htdocs/soft10134.html
Kuba

I also have the same issue.
Looks like they are working on it, this message is on the top level Downloads page:
Important Note: As of 2:30pm PT Sept. 18, OTN software downloads are currently unavailable. We apologize for any inconvenience and are working to restore them as quickly as we can.

WRT54GL Need the TFTP EXE link or file please, FTP link doesn't work 550 error.

Bricked the router, bad flash. Power LED is flashing.
Need the TFTP excutable please, FTP link doesn't work.
Thanks.

Try this link to unbrick the Linksys Router.Download 44.3 KB the TFTP utility.
Message Edited by Wizzard on 10-07-2009 09:38 AM

Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

Hi, everybody. After installing LION my D-Link doesn't work. So I don' t have Internet.

Safari show all tabs doesn't work all the time

It is annoying: safari show all tabs doesn't work all the time. The little icon to the right of the "New Tab" area sometimes works, and sometimes doesn't. The Shift Command Back-slash, sometimes works, and sometimes doesn't. I find no rhyme nor reason for this. I have a MacBook Pro, Mountain Lion, the latest updates. It doesn't matter if I am in Full Screen or not.
I am quite confused regarding this.

Open the Finder. From the Finder menu bar click Go > Go to Folder
Type of copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that helped, empty the cache more often from your keyboard.
Command + Option + E

My iPod touch 4th gen white's home button doesn't work the first time I press it, but the second time.

My home button doesn't work the first time I press it, but the second time. This is very annoying. Why is it doing this?

- Try a reset. It cures many ills and nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
-If a hardware problem see:
fix for Home button

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

[SOLVED] NET_PROFILES=('menu') doesn't work at boot time

Hi I've created two network profiles to change eth0 configuration on my laptop according to where I am.
The problem is that NET_PROFILES=('menu') (in rc.conf) doesn't work at boot time: the profile select dialog doesn't appear.
It works only if I do a /etc/rc.d/network restart.
Here is the relevant part of my rc.conf
lo="lo 127.0.0.1"
eth0="eth0 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
NET_PROFILES=('menu') #### I tried even without quotes with the same result!!
By the way, I tried this on three different machines (one is always up to date, the others aren't) with the same result.
Last edited by proc (2007-04-15 14:00:57)

iphitus thanks for your prompt reply, but I already have dialog installed. In fact the menu appears if I do a network restart, but it doesn't at boot.

Broken links report generator doesn't work

I found a website that didn't work with Firefox 3.6.15. I selected the Report broken website menu item. Typed in the problem description and clicked the Submit button. The popup broken link report continues to show 'sending report' with an in progress bar for the last 10 minutes! Apparently report sw cannot contact Firefox server to send report.

Mozilla Website Evangelism has ended, the '''Report Broken Website...''' function is gone in 4.0 & later versions, and the server was shutdown in December - which is the problem you are experiencing. You can use the Submit Feedback... feature in the Help menu in 4.0 & later, but if the report is about a website that doesn't work properly in Firefox, Mozilla isn't going to contact the website and encourage them to fix their issues.

HT1933 The Report a problem link doesn't work on my email receipt.

I want a refund for a piece of garbage app, but the report a problem or review link doen't work.

Yu can try contacting iTunes support via this page if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
It sounds like your son made an in-app purchase, you can turn them off on your iPad via Settings > General > Restrictions > In-App Purcahses 'off'. And depending upon what version of iOS that you have on your iPad you may also have a Require Password setting which you can set to 'Immediately' (the default is a 15 minute period during which it doesn't need re-entering).

Link in my customized Report Template doesn't work – Apex 3.1

I created a report template based on columns of my report
My query report is:
SELECT MEM_NAS ID, MEM_NOM NAME, MEM_DATE_NAIS BIRTH
FROM ACMT_MEMBRE;
My customized report template have this Row Template definition:
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td #ALIGNMENT# class="t16data_edit">#NAME#</td>
<td #ALIGNMENT# class="t16data_edit">#BIRTH#</td>
</tr>
This would redirect to the page 6 when user click anywhere on a row but it doesn’t work.
I have this error message:
CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');">
I realized that problem is caused by #ID# because if I hardcode this ID, it works.
How can my report template get the “ID” from my query report ?
Apex version: 3.1
Edited by: mario_romero77 on Jun 8, 2012 10:06 AM

mario_romero77 wrote:
I created a report template based on columns of my reportAlways post code wrapped in <tt>\...\</tt> tags to prevent the forum software mangling it.
My query report is:
SELECT MEM_NAS ID, MEM_NOM NAME, MEM_DATE_NAIS BIRTH
FROM ACMT_MEMBRE; My customized report template have this Row Template definition:
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td #ALIGNMENT# class="t16data_edit">#NAME#</td>
<td #ALIGNMENT# class="t16data_edit">#BIRTH#</td>
</tr>
Is the report template definitely of type Named Column (row template) (defined on App Builder page 4000:4654) and not Generic Columns (column template) (defined on page 400:258)?
Note that the <tt>#ALIGNMENT#</tt> substitution string is not supported in named column templates. Set column alignment explicitly using HTML attributes in the template, or use CSS.
This would redirect to the page 6 when user click anywhere on a row but it doesn’t work.
I have this error message:
CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');"> CHECK$01');">
{code}Where do you see this? It looks like there's a mismatch between the report columns returned by the query and those referenced in the report template. Or the data contains unsafe HTML characters that aren't being escaped.
Yes, my report query has a column called ID and it's set as Hidden. This could be the problem. In a report based on a named column template any columns referenced in the template must be +shown+ in the report, even if (as in this case) the column value is not visible to the user: the positioning of the <tt>#ID#</tt> column placeholder in the <tt>onclick</tt> attribute rather than in a table cell is what makes it "hidden". *The Show checkbox for the ID column must be checked.*
From the gobbledygook being generated it looks like there could be a row selector checkbox column in this report as well? Named column row templates must include substitution placeholders for every shown column. It's also advisable to keep the columns in the same order in the SQL, report column attributes and row template.
Something like
{code}
<tr onclick="redirect('f?p=&APP_ID.:6:&SESSION.:::6:P6_NAS:#ID#');">
<td class="t16data_edit">#CHECK$01#</td>
<td class="t16data_edit">#NAME#</td>
<td class="t16data_edit">#BIRTH#</td>
</tr>
{code}
I realized that problem is caused by #ID# because if I hardcode this ID, it works.
How can my report template get the “ID” from my query report ?If the above doesn't help then the easiest way to troubleshoot this would be for you to upload the app to apex.oracle.com and post guest developer credentials for the workspace so we can see the whole thing: template, SQL, and report attributes. Otherwise we're likely to and up with a lot of tedious to and fro here posting bits of code and attribute values.

Sub-report link doesn't work at run-time

Similar Messages

Maybe you are looking for