Sub total error in BEX

Hi Guys,
I have 3 KFs in my report- C1, C2, C3.
Values in the all the KF are as follows -
c1 - 13.21 , 15.53
c2 - 35.21, 46.24
c3 - 64.23, 45.23
I want to calcuate the average sub total of all the records under KFs, based on the
following Condition ...
the decimal part of the value should not be more than 59 after the total. if its more than 59 it should add up to the before value.
say in the c1 case : 13.21 + 15.53 = 28.74. but by the above condition, the correct value is 28.24.
can i write the above condtion in my BEx report.
plz help.
thanks - pra

Hi pra.
I have read your question several times, but cannot understand clearly enough what you are saying, particularly the paragraphs:
the decimal part of the value should not be more than 59 after the total. if its more than 59 it should add up to the before value.
say in the c1 case : 13.21 + 15.53 = 28.74. but by the above condition, the correct value is 28.24.
What does 'after the total' mean? total of what, or do you mean decimal point? And how is the 28.24 calculated?
Patrick

Similar Messages

Short dump when I do total or sub total in the ALV report

Hi,
When I do total or sub-total on the currency field in the ALV report, it'll give a short dump like
" The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X)".
   Short text of error message:
   Technical information about the message:
   Message classe...... "0K"
   Number.............. 000
   Variable 1.......... " "
   Variable 2.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
   Variable 3.......... " "
   Variable 4.......... " "
Trigger Location of Runtime Error
    Program                                 SAPLSLVC
    Include                                 LSLVCF36
    Row                                     2,726
    Module type                             (FORM)
    Module Name                             FILL_DATA_TABLE
sometime when I do the page down on the ALV report, the same short dump is coming.
Can anyone help me out.
Thanks
Selva

Hi,
I'm getting this short dump in the standard program.
I'm getting ALV report display perfectly. the problem is, when I do total or subtotal on the currency fields.
2704
2705 ************************************
2706 * Column per Fieldcat Entry
2707 ************************************
2708         ls_lvc_data-value = space.
2709         clear ls_lvc_data-style.
2710         loop at it_fcat_local assigning <ls_fcat>
2711                 where tech ne 'X' and no_out ne 'X'.
2712           if l_invisible eq 'X'.
2713             clear l_invisible.
2714             if <ls_fcat>-do_sum is initial.
2715               continue.
2716             else.
2717               clear ls_lvc_data-col_pos.
2718             endif.
2719           endif.
2720
2721           add 1 to ls_lvc_data-col_pos.
2722
2723           assign component <ls_fcat>-fieldname
2724                            of structure <ls_data> to <l_field_value>.
2725           if sy-subrc ne 0.
>>>>>             message x000(0k).
2727           endif.
2728
in this standard program, I'm getting the dump. the line is mentioned above in the code.

SSRS 2008 Work order report , in sub total donot want to add the 0 level in ( how to add the expression )

working in Work order report, this report has different level , for example
0 level transaction
1 level transaction
in subtotal don't want to add 0 level transaction,
when I did the sub total it added all the level , so in sub total amount double up because of that
how to add the expression so I can the level 0 take out from sub total , so it does not include in sub total
can some one please help me with this
thanks in advance

Hi Simon_ Hou
I tried the expr the way you suggested , it did not work getting error message, the exp I added is below
this the expression I added on sub total where is highlighted in Yellow, under Cost amount column,
I really appreciate the help
=Sum(IIF(Fields!COLLECTREFLEVEL.Value=
"0",0,Fields!CostAMOUNT.Value),"DataSet1")
please see below my QUERY, can you please help and let me know what I did wrong in my exp
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate)

Force the Summary Sub totals on same page as the Repeating Group

Hello folks,
I have a Group by Left Report where I am showing Patients and the Visits that they have taken for each Department.
I am then doing a Sub Total of the number of Visits the Patient has taken. I would like to make sure that the sub total shows
up on the same page as the data in the Repeating Group. I tried using an Anchor but the Report does not like it.
It gives an Error: REP 1213 - Field references column at a frequency below its group when I anchor from Repeating frame to the sub total footer
and REP 1814 Report cannot be formatted. Object 'Horizontally' can never fit within 'M_1' when I try to anchor the other way.
My goal is to show the Sub Totals (Total) on the same page as the Patient and not go to the next page. I have enclosed the single dashed line and the Total (Label and field) in a Frame.
Output of Report:
Patient ID     Patient Name              Department              Visit
======================================================================
1001           Mary Poppins              Department 001              3
                                         Department 002              4
                                         Department 003              1
                                         Total                       8
1002           Peter Pan                 Department 001              2
                                         Department 002              1
                                         Department 003              2
                                         Total                       5
                                         -----------------------------Thanks in advance!

Pls set the property(page protect of the frame containing both sub total and patient details) to yes.

ALV Display - sub totals

hi gurus,
In my report program i have a monthly report displaying the data for that month.
1. Now in my ALV grid i want The SUB-TOTALS for the work center wise data for a field of the alv. there are many workcenters data in my report. So after the end of each work center , i want the subtotal of a calculated TAT field.
2. At the end of the report, I want the average TAT(field calculated by my report program) for that month.
So how can i make the coding for the above.
Iam a fresher to this field, so give me in detail.
regards,
chaitanya

Hi
i am giving a sample example for subtotals of alv.
REPORT z_alv_subtotal.
*& Table declaration
TABLES: EKKO.
*& Type pool declaration
TYPE-POOLS: SLIS. " Type pool for ALV
*& Selection screen
SELECT-OPTIONS: S_EBELN FOR EKKO-EBELN.
*& Type declaration
Type declaration for internal table to store EKPO data
TYPES: BEGIN OF X_DATA,
EBELN TYPE CHAR30, " Document no.
EBELP TYPE EBELP, " Item no
MATNR TYPE MATNR, " Material no
MATNR1 TYPE MATNR, " Material no
WERKS TYPE WERKS_D, " Plant
WERKS1 TYPE WERKS_D, " Plant
NTGEW TYPE ENTGE, " Net weight
GEWE TYPE EGEWE, " Unit of weight
END OF X_DATA.
*& Internal table declaration
DATA:
Internal table to store EKPO data
I_EKPO TYPE STANDARD TABLE OF X_DATA INITIAL SIZE 0,
Internal table for storing field catalog information
I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
Internal table for Top of Page info. in ALV Display
I_ALV_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
Internal table for ALV Display events
I_EVENTS TYPE SLIS_T_EVENT,
Internal table for storing ALV sort information
I_SORT TYPE SLIS_T_SORTINFO_ALV,
I_EVENT TYPE SLIS_T_EVENT.
*& Work area declaration
DATA:
WA_EKKO TYPE X_DATA,
WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_EVENTS TYPE SLIS_ALV_EVENT,
WA_SORT TYPE SLIS_SORTINFO_ALV.
*& Constant declaration
CONSTANTS:
C_HEADER TYPE CHAR1
VALUE 'H', "Header in ALV
C_ITEM TYPE CHAR1
VALUE 'S'.
*& Start-of-selection event
START-OF-SELECTION.
Select data from ekpo
SELECT EBELN " Doc no
EBELP " Item
MATNR " Material
MATNR " Material
WERKS " Plant
WERKS " Plant
NTGEW " Quantity
GEWEI " Unit
FROM EKPO
INTO TABLE I_EKPO
WHERE EBELN IN S_EBELN
AND NTGEW NE '0.00'.
IF SY-SUBRC = 0.
SORT I_EKPO BY EBELN EBELP MATNR .
ENDIF.
To build the Page header
PERFORM SUB_BUILD_HEADER.
To prepare field catalog
PERFORM SUB_FIELD_CATALOG.
Perform to populate the layout structure
PERFORM SUB_POPULATE_LAYOUT.
Perform to populate the sort table.
PERFORM SUB_POPULATE_SORT.
Perform to populate ALV event
PERFORM SUB_GET_EVENT.
END-OF-SELECTION.
Perform to display ALV report
PERFORM SUB_ALV_REPORT_DISPLAY.
*& Form sub_build_header
To build the header
No Parameter
FORM SUB_BUILD_HEADER .
Local data declaration
DATA: L_SYSTEM TYPE CHAR10 , "System id
L_R_LINE TYPE SLIS_LISTHEADER, "Hold list header
L_DATE TYPE CHAR10, "Date
L_TIME TYPE CHAR10, "Time
L_SUCCESS_RECORDS TYPE I, "No of success records
L_TITLE(300) TYPE C. " Title
Title Display
L_R_LINE-TYP = C_HEADER. " header
L_TITLE = 'Test report'(001).
L_R_LINE-INFO = L_TITLE.
APPEND L_R_LINE TO I_ALV_TOP_OF_PAGE.
CLEAR L_R_LINE.
Run date Display
CLEAR L_DATE.
L_R_LINE-TYP = C_ITEM. " Item
WRITE: SY-DATUM TO L_DATE MM/DD/YYYY.
L_R_LINE-KEY = 'Run Date :'(002).
L_R_LINE-INFO = L_DATE.
APPEND L_R_LINE TO I_ALV_TOP_OF_PAGE.
CLEAR: L_R_LINE,
L_DATE.ENDFORM. " sub_build_header
*& Form sub_field_catalog
Build Field Catalog
No Parameter
FORM SUB_FIELD_CATALOG .
Build Field Catalog
PERFORM SUB_FILL_ALV_FIELD_CATALOG USING:
'01' '01' 'EBELN' 'I_EKPO' 'L' 'Doc No'(003) ' ' ' ' ' ' ' ',
'01' '02' 'EBELP' 'I_EKPO' 'L' 'Item No'(004) 'X' 'X' ' ' ' ',
'01' '03' 'MATNR' 'I_EKPO' 'L' 'Material No'(005) 'X' 'X' ' ' ' ',
'01' '03' 'MATNR1' 'I_EKPO' 'L' 'Material No'(005) ' ' ' ' ' ' ' ',
'01' '04' 'WERKS' 'I_EKPO' 'L' 'Plant'(006) 'X' 'X' ' ' ' ',
'01' '04' 'WERKS1' 'I_EKPO' 'L' 'Plant'(006) ' ' ' ' ' ' ' ',
'01' '05' 'NTGEW' 'I_EKPO' 'R' 'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'
ENDFORM. " sub_field_catalog
*& Form sub_fill_alv_field_catalog
*& For building Field Catalog
*& p_rowpos Row position
*& p_colpos Col position
*& p_fldnam Fldname
*& p_tabnam Tabname
*& p_justif Justification
*& p_seltext Seltext
*& p_out no out
*& p_tech Technical field
*& p_qfield Quantity field
*& p_qtab Quantity table
FORM SUB_FILL_ALV_FIELD_CATALOG USING P_ROWPOS TYPE SYCUROW
P_COLPOS TYPE SYCUCOL
P_FLDNAM TYPE FIELDNAME
P_TABNAM TYPE TABNAME
P_JUSTIF TYPE CHAR1
P_SELTEXT TYPE DD03P-SCRTEXT_L
P_OUT TYPE CHAR1
P_TECH TYPE CHAR1
P_QFIELD TYPE SLIS_FIELDNAME
P_QTAB TYPE SLIS_TABNAME.
Local declaration for field catalog
DATA: WA_LFL_FCAT TYPE SLIS_FIELDCAT_ALV.
WA_LFL_FCAT-ROW_POS = P_ROWPOS. "Row
WA_LFL_FCAT-COL_POS = P_COLPOS. "Column
WA_LFL_FCAT-FIELDNAME = P_FLDNAM. "Field Name
WA_LFL_FCAT-TABNAME = P_TABNAM. "Internal Table Name
WA_LFL_FCAT-JUST = P_JUSTIF. "Screen Justified
WA_LFL_FCAT-SELTEXT_L = P_SELTEXT. "Field Text
WA_LFL_FCAT-NO_OUT = P_OUT. "No output
WA_LFL_FCAT-TECH = P_TECH. "Technical field
WA_LFL_FCAT-QFIELDNAME = P_QFIELD. "Quantity unit
WA_LFL_FCAT-QTABNAME = P_QTAB . "Quantity table
IF P_FLDNAM = 'NTGEW'.
WA_LFL_FCAT-DO_SUM = 'X'.
ENDIF.
APPEND WA_LFL_FCAT TO I_FIELDCAT.
CLEAR WA_LFL_FCAT.
ENDFORM. " sub_fill_alv_field_catalog
*& Form sub_populate_layout
Populate ALV layout
No Parameter
FORM SUB_POPULATE_LAYOUT . CLEAR WA_LAYOUT.
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'." Optimization of Col width
ENDFORM. " sub_populate_layout
*& Form sub_populate_sort
Populate ALV sort table
No Parameter
FORM SUB_POPULATE_SORT .
Sort on material
WA_SORT-SPOS = '01' .
WA_SORT-FIELDNAME = 'MATNR'.
WA_SORT-TABNAME = 'I_EKPO'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO I_SORT .
CLEAR WA_SORT.
Sort on plant
WA_SORT-SPOS = '02'.
WA_SORT-FIELDNAME = 'WERKS'.
WA_SORT-TABNAME = 'I_EKPO'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO I_SORT .
CLEAR WA_SORT.
ENDFORM. " sub_populate_sort
*& Form sub_get_event
Get ALV grid event and pass the form name to subtotal_text
event
No Parameter
FORM SUB_GET_EVENT .
CONSTANTS : C_FORMNAME_SUBTOTAL_TEXT TYPE SLIS_FORMNAME VALUE
'SUBTOTAL_TEXT'.
DATA: L_S_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 4
IMPORTING
ET_EVENTS = I_EVENT
EXCEPTIONS
LIST_TYPE_WRONG = 0
OTHERS = 0.
Subtotal
READ TABLE I_EVENT INTO L_S_EVENT
WITH KEY NAME = SLIS_EV_SUBTOTAL_TEXT.
IF SY-SUBRC = 0.
MOVE C_FORMNAME_SUBTOTAL_TEXT TO L_S_EVENT-FORM.
MODIFY I_EVENT FROM L_S_EVENT INDEX SY-TABIX.
ENDIF.
ENDFORM. " sub_get_event
*& Form sub_alv_report_display
For ALV Report Display
No Parameter
FORM SUB_ALV_REPORT_DISPLAY .
DATA: L_REPID TYPE SYREPID .
L_REPID = SY-REPID .
This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = L_REPID
I_CALLBACK_TOP_OF_PAGE = 'SUB_ALV_TOP_OF_PAGE'
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = I_FIELDCAT
IT_SORT = I_SORT
IT_EVENTS = I_EVENT
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.ENDFORM. " sub_alv_report_display
FORM sub_alv_top_of_page
Call ALV top of page
No parameter
FORM SUB_ALV_TOP_OF_PAGE. "#EC CALLED
To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_ALV_TOP_OF_PAGE.
ENDFORM. "alv_top_of_page
*& Form subtotal_text
Build subtotal text
P_total Total
p_subtot_text Subtotal text info
FORM SUBTOTAL_TEXT CHANGING
P_TOTAL TYPE ANY
P_SUBTOT_TEXT TYPE SLIS_SUBTOT_TEXT.
Material level sub total
IF P_SUBTOT_TEXT-CRITERIA = 'MATNR'.
P_SUBTOT_TEXT-DISPLAY_TEXT_FOR_SUBTOTAL
= 'Material level total'(009).
ENDIF.
Plant level sub total
IF P_SUBTOT_TEXT-CRITERIA = 'WERKS'.
P_SUBTOT_TEXT-DISPLAY_TEXT_FOR_SUBTOTAL = 'Plant level total'(010).
ENDIF.

Totals and Sub-Totals in ALV GRID

Could anyone advice, how to display sub-totals and totals in ALV Grid(using FM).
Ex:           value1    value2
                  100        50
                  200        50
    subtotal   300      100
    total                    400
Thanks in advance...

Refer below demo code and see perform Sort_list..
it wil serve ur purpose.
REPORT ZGILL_ALV    message-id rp                           .
type-pools slis.
tables: zgill_main,zgill_details.
data z_fieldcat type slis_t_fieldcat_alv.
data begin of itab occurs 0.
DATA ICON TYPE ICON-ID.
     include structure zgill_main.
data salary like zgill_details-salary.
data end of itab.
*data itab1 like table of itab with header line.
data : WA_SORT TYPE SLIS_SORTINFO_ALV,
       IT_SORT TYPE SLIS_T_SORTINFO_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
       IT_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
       WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
PARAMETERS: p_list radiobutton group A1,
            P_GRID RADIOBUTTON GROUP A1.
SELECT-OPTIONS: S_PERNR FOR ZGILL_MAIN-PERNR.
start-of-selection.
perform fill_itab.
perform sort_list.
**************Start of scenario without container******************************************
*********Method 1***********
perform fill_fieldcat. " Manuallly Preparing Fiedl Catalog
*********Method 2***********
*perform fill_fieldcat1 changing z_fieldcat.   "Preparing field catalog with merge function
perform display_alv.
*****************end of scenario without container*****************************************
*&      Form fill_itab
      text
--> p1        text
<-- p2        text
form fill_itab .
*select * from zgill_main up to 20 rows INTO CORRESPONDING FIELDS OF TABLE itab.
*ITAB1[] = ITAB[].
select apernr aname aorg adob b~salary INTO CORRESPONDING FIELDS OF TABLE itab
       from zgill_main as a join zgill_details as b on apernr = bpernr
       WHERE A~PERNR IN S_PERNR.
LOOP AT ITAB.
IF ITAB-PERNR < 1111.
ITAB-ICON = '@08@'.
ELSEIF ITAB-PERNR > 1111 AND ITAB-PERNR < 11111111.
ITAB-ICON = '@09@'.
ELSEIF ITAB-PERNR GE 11111111.
ITAB-ICON = '@0A@'.
ENDIF.
MODIFY ITAB INDEX SY-TABIX.
ENDLOOP.
endform.                    " fill_itab
*&      Form display_alv
      text
--> p1        text
<-- p2        text
form display_alv .
data repid like sy-repid.
REPID = SY-REPID.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'.
WA_LAYOUT-SUBTOTALS_TEXT = 'SUBTOTAL'.
WA_LAYOUT-TOTALS_TEXT = 'TOTAL'.
IF P_GRID = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = repid
   IT_FIELDCAT                       = IT_FIELDTAB
   IT_SORT                           = IT_SORT
   IS_LAYOUT                         = WA_LAYOUT
TABLES
    t_outtab                          = itab[]
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2.
IF sy-subrc <> 0.
   message e016 with 'Error in Display'.
ENDIF.
ELSEIF P_LIST = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = repid
   IT_FIELDCAT                       = IT_FIELDTAB
   IT_SORT                           = IT_SORT
   IS_LAYOUT                         = WA_LAYOUT
TABLES
    t_outtab                          = itab[]
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2.
IF sy-subrc <> 0.
   message e016 with 'Error in Display'.
ENDIF.
ENDIF.
endform.                    " display_alv
*&      Form fill_fieldcat1
      text
--> p1        text
<-- p2        text
form fill_fieldcat1 changing d_fcat type slis_t_fieldcat_alv.
data repid like sy-repid.
data d_fcat1 type slis_t_fieldcat_alv with header line.
REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
   I_PROGRAM_NAME               = repid
   I_INTERNAL_TABNAME           = 'ITAB'
   I_STRUCTURE_NAME             = 'ZGILL_MAIN'
I_CLIENT_NEVER_DISPLAY       = 'X'
I_INCLNAME                   =
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
CHANGING
    ct_fieldcat                  = d_fcat[]
EXCEPTIONS
   INCONSISTENT_INTERFACE       = 1
   PROGRAM_ERROR                = 2
   OTHERS                       = 3.
IF sy-subrc <> 0.
   message e016 with 'Error in preparing fiedl catalog'.
ENDIF.
loop at d_fcat into d_fcat1.
case d_fcat1-fieldname.
when 'NAME'.
d_fcat1-reptext_ddic = 'Emp Name'.
MODIFY D_FCAT FROM D_FCAT1.
WHEN 'PERNR'.
d_fcat1-reptext_ddic = 'Emp Num'.
MODIFY D_FCAT FROM D_FCAT1.
WHEN 'ORG'.
d_fcat1-reptext_ddic = 'Org Unit'.
MODIFY D_FCAT FROM D_FCAT1.
endcase.
clear d_fcat1.
endloop.
endform.                    " fill_fieldcat1
*&      Form sort_list
      text
--> p1        text
<-- p2        text
form sort_list .
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'DOB'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NAME'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
endform.                    " sort_list
*&      Form fill_fieldcat
      text
--> p1        text
<-- p2        text
form fill_fieldcat .
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'ICON'.
WA_FIELDCAT-SELTEXT_L = 'TRAFFIC'.
WA_FIELDCAT-ICON = 'X'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'PERNR'.
WA_FIELDCAT-SELTEXT_L = 'EMP NUMBER'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
when 'maktx'.
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'NAME'.
WA_FIELDCAT-SELTEXT_L = 'EMP NAME'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-OUTPUTLEN = 15.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'ORG'.
WA_FIELDCAT-SELTEXT_L = 'ORG UNIT'.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'DOB'.
WA_FIELDCAT-SELTEXT_L = 'BIRTH DATE'.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-OUTPUTLEN = 12.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'SALARY'.
WA_FIELDCAT-SELTEXT_L = 'SALARY'.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-OUTPUTLEN = 25.
WA_FIELDCAT-do_sum = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
endform.                    " fill_fieldcat

URGENT:-Regarding sub-total in alv code

Hi,
i had made dis report and it is working fine but now i want to add the sub total feature in dis report as it is the new requierment of report.
plzz help me out by providing the code of sub-total feature in dis report .
Help will be definately rewarded. here is d code of report:-
TABLES: ISEG,MARA.
TYPE-POOLS : SLIS.
DATA : DATE1(15) TYPE C,
DATE2(15) TYPE C,
TITLE(65) TYPE C,
DT(25) TYPE C.
DATA : ITEVENT TYPE SLIS_T_EVENT.
DATA: lv_sort TYPE slis_sortinfo_alv,
      t_sort type slis_t_sortinfo_alv.
DATA : repid LIKE sy-repid.
INTERNAL TABLE FOR INVENTORY STOCK *****************
DATA: BEGIN OF ITS1 OCCURS 0,
      MATNR LIKE ISEG-MATNR,
      ITEMID(6) TYPE C,
      MEINS LIKE ISEG-MEINS,
      MENGE LIKE ISEG-MENGE,
      WRTZL LIKE ISEG-WRTZL,
      BUCHM LIKE ISEG-BUCHM,
      WRTBM LIKE ISEG-WRTBM,
      WERKS LIKE ISEG-WERKS,
      BUDAT LIKE ISEG-BUDAT,
      ZLDAT LIKE ISEG-ZLDAT,
      MTART LIKE MARA-MTART,
      ITEMDESC LIKE MAKT-MAKTX,
      DIFFQTY LIKE ISEG-BUCHM,
      DIFFVALUE LIKE ISEG-WRTBM,
      GRUND LIKE ISEG-GRUND,
      GRTXT LIKE T157E-GRTXT,
      BWART LIKE T157E-BWART,
      REAS TYPE C LENGTH 15,
      END OF ITS1.
data: t_heading type slis_t_listheader.
SELECTION-SCREEN BEGIN OF BLOCK PAR1 WITH FRAME TITLE TEXT-001.
*SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
*********PARAMETERS*********
PARAMETERS : PLANT LIKE ISEG-WERKS OBLIGATORY.
*********SELECTION SCREEN OPTIONS*********
SELECT-OPTIONS : R_DATE FOR ISEG-BUDAT OBLIGATORY NO-EXTENSION,
                 M_TYPE FOR MARA-MTART,
                 IT_M FOR MARA-MATNR.
*********DEFINING VARIABLES*********
SELECTION-SCREEN END OF BLOCK par1.
CONCATENATE R_DATE-LOW6(2) '.' R_DATE-LOW4(2) '.' R_DATE-LOW+0(4) INTO DATE1.
CONCATENATE R_DATE-HIGH6(2) '.' R_DATE-HIGH4(2) '.' R_DATE-HIGH+0(4) INTO DATE2.
TOP-OF-PAGE.
PERFORM PG_HEADER.
   START-OF-SELECTION.
SELECT AMATNR AMEINS AMENGE AWRTZL ABUCHM AWRTBM AWERKS ABUDAT AZLDAT BMTART AGRUND CBWART
   FROM ISEG AS A INNER JOIN MARA AS B ON BMATNR = AMATNR
   INNER JOIN MSEG AS C ON AMBLNR = CMBLNR
   INTO CORRESPONDING FIELDS OF TABLE ITS1 WHERE BMATNR = AMATNR AND BMEINS = AMEINS AND AWERKS = PLANT AND ABUDAT IN R_DATE AND BMTART IN M_TYPE AND BMATNR IN IT_M.
SORT ITS1 BY MTART.
LOOP AT ITS1.
     ITS1-ITEMID = ITS1-MATNR+12(6).
     ITS1-DIFFQTY = ITS1-MENGE - ITS1-BUCHM.
     ITS1-DIFFVALUE = ITS1-WRTZL - ITS1-WRTBM.
     SELECT SINGLE MAKTX FROM MAKT INTO ITS1-ITEMDESC WHERE MATNR = ITS1-MATNR.
     SELECT SINGLE GRTXT INTO ITS1-GRTXT FROM T157E WHERE GRUND = ITS1-GRUND AND SPRAS = 'E' AND BWART = ITS1-BWART.
     MODIFY ITS1.
ENDLOOP.
PERFORM PRN_SMSTOCK_ALV.
WRITING DATA FROM D TABLES**********
FORM PG_HEADER.
WRITE : 'INVENTORY REPORT             PLANT : ', PLANT.
ENDFORM.
*&      Form PRN_SMSTOCK_ALV
      text
--> p1        text
<-- p2        text
form PRN_SMSTOCK_ALV .
data: w_title   type lvc_title,
      w_repid   type syrepid,
      w_comm    type slis_formname,
      w_status type slis_formname,
      x_layout type slis_layout_alv,
      t_event   type slis_t_event,
      t_fieldcat type slis_t_fieldcat_alv,
      t_subtot TYPE slis_t_sortinfo_alv,
      subtot LIKE LINE OF t_subtot.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
perform set_fieldcat2 using:
1 'MTART'     'MTART'     'MARA' '15' space 'MATERIAL TYPE'        space space space space space space space space SPACE t_fieldcat 'L' 'L',
2 'ITEMID'    'ITEMID'    'MARA' '7'   space 'ITEM ID'              space space space space space space space space SPACE t_fieldcat 'R' 'C',
3 'ITEMDESC' 'MAKTX'     'MAKT' '25' space 'MATERIAL DESCRIPTION' space space space space space space space space SPACE t_fieldcat 'L' 'C',
4 'MEINS'     'MEINS'     'MARA' '5'   space 'UOM'                  space space space space space space space space SPACE t_fieldcat 'C' 'C',
5 'MENGE'     'MENGE'     'ISEG' '13' space 'ORG.INV.QTY'          space space space space space space space space SPACE t_fieldcat 'R' 'C',
6 'WRTZL'     'WRTZL'     'ISEG' '13' space 'ORG.INV.VALUE'        space space space space space space space space SPACE t_fieldcat 'R' 'C',
7 'BUCHM'     'BUCHM'     'ISEG' '13' space 'PHY.INV.QTY'          space space space space space space space space SPACE t_fieldcat 'R' 'C',
8 'WRTBM'     'WRTBM'     'ISEG' '13' space 'PHY.INV.VALUE'        space space space space space space space space SPACE t_fieldcat 'R' 'C',
9 'DIFFQTY'   'MENGE'     'ISEG' '13' space 'DIFF.INV.QTY'         space space space space space space space space SPACE t_fieldcat 'R' 'C',
10 'DIFFVALUE' 'WRTZL'     'ISEG' '13' space 'DIFF.INV.VALUE'       space space space space space space space space SPACE t_fieldcat SPACE 'P',
11 'BUDAT'     'BUDAT'     'ISEG' '18' space 'CORRECTED DATE'       space space space space space space space space SPACE t_fieldcat 'C' 'C',
12 'GRTXT'     'GRTXT'     'ISEG' '18' space 'REASON'               space space space space space space space space SPACE t_fieldcat 'L' 'L',
13 'REAS'      'REAS'      'ISEG' '18' space 'AUTH.BY'              space space space space space space space space SPACE t_fieldcat 'C' 'C'.
x_layout-zebra = 'X'.
perform set_top_page_heading using t_heading t_event.
perform set_events using t_event.
w_status = ''.
w_repid = sy-repid.
w_comm   = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program       = w_repid
      it_fieldcat              = t_fieldcat
      i_Callback_top_of_page   = 'Top-of-page'
      is_layout                = x_layout
      it_sort                  = t_sort
      i_callback_pf_status_set = w_status
      i_callback_user_command = w_comm
      i_save                   = 'X'
      it_events                = t_event
      i_grid_title             = w_title
      tables
      t_outtab                 = ITS1
      exceptions
      program_error            = 1
      others                   = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM.
FORM set_fieldcat2 USING
      p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
    p_subtot
      t_fieldcat TYPE slis_t_fieldcat_alv
      P_JUST
      P_FTYPE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
IF NOT P_JUST IS INITIAL.
    WA_FIELDCAT-JUST = P_JUST.
ENDIF.
IF NOT p_edit IS INITIAL.
    wa_fieldcat-Input     = 'X'.
    wa_fieldcat-edit     = 'X'.
    wa_fieldcat-do_sum = 'x'.
   wa_fieldcat-checkbox = 'x'.
   wa_fieldcat-hotspot = 'x'.
    ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
======================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
          it_list_commentary = t_heading.
ENDFORM.
form set_top_page_heading using t_heading type slis_t_listheader
                                t_events type slis_t_event.
data: x_heading type slis_listheader,
      x_event   type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = 'PHYSICAL INVENTORY AUDIT REPORT'.
append x_heading to t_heading.
Plant Name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'PLANT        : '.
x_heading-info = PLANT.
append x_heading to t_heading.
IF DATE2 = '00.00.0000'.
CONCATENATE DATE1 'to' DATE1 INTO DT SEPARATED BY SPACE.
ELSE.
CONCATENATE DATE1 'to' DATE2 INTO DT SEPARATED BY SPACE.
ENDIF.
X_heading-TYP = 'S'.
X_heading-key = 'PERIOD         :'.
X_heading-INFO = DT.
APPEND x_heading TO t_heading.
Control Date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL NO. :'.
x_heading-info = ' ASDFADDFAAS DATE : 11.04.2007'.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
form set_events using t_events type slis_t_event.
data: x_event   type line of slis_t_event.
endform.
Edited by: ric .s on Jan 29, 2008 5:21 AM

Hi,
    U can do subtotal for a field based on some other field in ur ALV report using slis_t_sortinfo_alv.
see the sample code below...
data: int_sort TYPE slis_t_sortinfo_alv,
          fs_sort TYPE slis_sortinfo_alv.
Sort the output based on ORG UNIT.
CLEAR fs_sort.
fs_sort-fieldname = 'ORGEH'.
fs_sort-subtot = 'X'.
fs_sort-up = 'X'.
APPEND fs_sort TO int_sort.
perform f_alv_catsfieldcat.
Fieldcat calculates the sum for SMPCNT field.
FORM f_alv_catsfieldcat.
   DATA: loc_fieldcat TYPE slis_fieldcat_alv.
DEFINE define_field.
    clear loc_fieldcat.
    loc_fieldcat-fieldname = &1.
    loc_fieldcat-seltext_l = &2.
    loc_fieldcat-key = &3.
    loc_fieldcat-outputlen = &4.
    loc_fieldcat-do_sum = &5.
    append loc_fieldcat to int_fieldcat.
END-OF-DEFINITION.
REFRESH int_fieldcat.
CLEAR int_fieldcat.
define_field 'PERNR' text-029 'X' '8' ''.
define_field 'ENAME' text-030 '' '40' ''.
define_field 'KOSTL' text-037 '' '10' ''.
define_field 'SMPCNT' text-040 '' '' 'X'.
endform.
Then call REUSE_ALV-GRID_DISPLAY with ur internal table with int_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            i_callback_program       = sy-repid
            i_callback_top_of_page   = 'TOP_OF_PAGE'
            it_sort                  = int_sort
         i_callback_pf_status_set = 'F_PF_STATUS_SET'
            i_callback_user_command = 'F_USER_COMMAND'
            it_fieldcat              = int_fieldcat
            i_save                   = 'X'
          TABLES
            t_outtab                 = int_outputcpy
          EXCEPTIONS
            program_error            = 1
            OTHERS                   = 2.
        IF sy-subrc <> 0.
          WRITE / 'error'.
        ENDIF.
Hope it will help u..
Reward points if helpful
Cheers,
Shanthi
Edited by: shanthi ps on Jan 29, 2008 5:37 AM
Edited by: shanthi ps on Jan 29, 2008 5:38 AM

Own text in sub total

Hi All,
I have the following requirement in ALV grid display- thru ALV FMs (not using OO ALV)
Inv no           Inv type    amount
1          A          6
3          A          8
     Total average for for A is 14 (14/2)
2          B          6
9          B          3
8          B          4
10          B          7
     Total average for for B is 5 (20/4)
Here after every Invoice type i need to calculate average and display with my own text as explained above.
I have searched many sites and tried but not able to get it..
Request you to please help if u have any idea on it.
Thanks.
Regards,
Lokesh

*& Report Z_ALV_SUBTOTAL
REPORT z_alv_subtotal.&----
*& Table declaration
&----TABLES: ekko.&----
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV&----
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.&----
*& Type declaration
&----* Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
       ebeln TYPE char30, " Document no.
       ebelp TYPE ebelp,   " Item no
       matnr TYPE matnr,   " Material no
       matnr1 TYPE matnr,   " Material no
       werks TYPE werks_d, " Plant
       werks1 TYPE werks_d, " Plant
       ntgew TYPE entge,   " Net weight
       gewe   TYPE egewe,   " Unit of weight
       END OF x_data.&----
*& Internal table declaration
DATA:* Internal table to store EKPO data
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
Internal table for ALV Display events
i_events TYPE slis_t_event,
Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.&----
*& Work area declaration
&----DATA:
wa_ekko TYPE x_data,
wa_layout     TYPE slis_layout_alv,
wa_events         TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.&----
*& Constant declaration
&----CONSTANTS:
   c_header   TYPE char1
              VALUE 'H',                    "Header in ALV
   c_item     TYPE char1
              VALUE 'S'.&----
*& Start-of-selection event
&----START-OF-SELECTION.* Select data from ekpo
SELECT ebeln " Doc no
         ebelp " Item
         matnr " Material
         matnr " Material
         werks " Plant
         werks " Plant
         ntgew " Quantity
         gewei " Unit
         FROM ekpo
         INTO TABLE i_ekpo
         WHERE ebeln IN s_ebeln
         AND ntgew NE '0.00'. IF sy-subrc = 0.
    SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.* To build the Page header
PERFORM sub_build_header.* To prepare field catalog
PERFORM sub_field_catalog.* Perform to populate the layout structure
PERFORM sub_populate_layout.* Perform to populate the sort table.
PERFORM sub_populate_sort.* Perform to populate ALV event
PERFORM sub_get_event.END-OF-SELECTION.* Perform to display ALV report
PERFORM sub_alv_report_display.
*&      Form sub_build_header
      To build the header
      No Parameter
FORM sub_build_header .* Local data declaration
DATA: l_system     TYPE char10 ,          "System id
        l_r_line     TYPE slis_listheader, "Hold list header
        l_date       TYPE char10,           "Date
        l_time       TYPE char10,           "Time
        l_success_records TYPE i,           "No of success records
        l_title(300) TYPE c.                " Title
Title Display
l_r_line-typ = c_header.               " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.* Run date Display
CLEAR l_date.
l_r_line-typ = c_item.                " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
         l_date.ENDFORM.                    " sub_build_header
*&      Form sub_field_catalog
      Build Field Catalog
      No Parameter
FORM sub_field_catalog .* Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING:     '01' '01' 'EBELN' 'I_EKPO' 'L'
     'Doc No'(003) ' ' ' ' ' ' ' ',     '01' '02' 'EBELP' 'I_EKPO' 'L'
     'Item No'(004) 'X' 'X' ' ' ' ',     '01' '03' 'MATNR' 'I_EKPO' 'L'
     'Material No'(005) 'X' 'X' ' ' ' ',     '01' '03' 'MATNR1' 'I_EKPO' 'L'
     'Material No'(005) ' ' ' ' ' ' ' ',
     '01' '04' 'WERKS' 'I_EKPO' 'L'
     'Plant'(006) 'X' 'X' ' ' ' ',     '01' '04' 'WERKS1' 'I_EKPO' 'L'
     'Plant'(006) ' ' ' ' ' ' ' ',     '01' '05' 'NTGEW' 'I_EKPO' 'R'
     'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.ENDFORM.                    " sub_field_catalog&----
*&     Form sub_fill_alv_field_catalog
*&     For building Field Catalog
*&     p_rowpos   Row position
*&     p_colpos   Col position
*&     p_fldnam   Fldname
*&     p_tabnam   Tabname
*&     p_justif   Justification
*&     p_seltext Seltext
*&     p_out      no out
*&     p_tech     Technical field
*&     p_qfield   Quantity field
*&     p_qtab     Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos    TYPE sycurow
                                        p_colpos    TYPE sycucol
                                        p_fldnam    TYPE fieldname
                                        p_tabnam    TYPE tabname
                                        p_justif    TYPE char1
                                        p_seltext   TYPE dd03p-scrtext_l
                                        p_out       TYPE char1
                                        p_tech      TYPE char1
                                        p_qfield    TYPE slis_fieldname
                                        p_qtab      TYPE slis_tabname.* Local declaration for field catalog
DATA: wa_lfl_fcat    TYPE slis_fieldcat_alv. wa_lfl_fcat-row_pos        = p_rowpos.     "Row
wa_lfl_fcat-col_pos        = p_colpos.     "Column
wa_lfl_fcat-fieldname      = p_fldnam.     "Field Name
wa_lfl_fcat-tabname        = p_tabnam.     "Internal Table Name
wa_lfl_fcat-just           = p_justif.     "Screen Justified
wa_lfl_fcat-seltext_l      = p_seltext.    "Field Text
wa_lfl_fcat-no_out         = p_out.        "No output
wa_lfl_fcat-tech           = p_tech.       "Technical field
wa_lfl_fcat-qfieldname     = p_qfield.     "Quantity unit
wa_lfl_fcat-qtabname       = p_qtab .      "Quantity table IF p_fldnam = 'NTGEW'.
    wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM.                    " sub_fill_alv_field_catalog&----
*&      Form sub_populate_layout
      Populate ALV layout
      No Parameter
FORM sub_populate_layout . CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'." Optimization of Col widthENDFORM.                    " sub_populate_layout&----
*&      Form sub_populate_sort
      Populate ALV sort table
      No Parameter
FORM sub_populate_sort .* Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.* Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.                    " sub_populate_sort&----
*&      Form sub_get_event
      Get ALV grid event and pass the form name to subtotal_text
      event
      No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'. DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 4
    IMPORTING
      et_events       = i_event
    EXCEPTIONS
      list_type_wrong = 0
      OTHERS          = 0.* Subtotal
READ TABLE i_event INTO l_s_event
                    WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
    MOVE c_formname_subtotal_text TO l_s_event-form.
    MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.ENDFORM.                    " sub_get_event&----
*&      Form sub_alv_report_display
      For ALV Report Display
      No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .* This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = l_repid
      i_callback_top_of_page   = 'SUB_ALV_TOP_OF_PAGE'
      is_layout                = wa_layout
      it_fieldcat              = i_fieldcat
      it_sort = i_sort
      it_events                = i_event
      i_default                = 'X'
      i_save                   = 'A'
    TABLES
      t_outtab                 = i_ekpo
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
   MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.ENDFORM.                    " sub_alv_report_display&----
      FORM sub_alv_top_of_page
      Call ALV top of page
      No parameter
----FORM sub_alv_top_of_page.                                   "#EC CALLED* To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_alv_top_of_page.
ENDFORM.                    "alv_top_of_page&----
*&      Form subtotal_text
      Build subtotal text
      P_total Total
      p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
               p_total TYPE any
               p_subtot_text TYPE slis_subtot_text.
Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
    p_subtot_text-display_text_for_subtotal
    = 'Material level total'(009).
ENDIF.* Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
    p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM.                    "subtotal_text

Regarding totals and sub totals text in alv

Hi all,
i am displaying Totals and subtotals ......but i want to display the text before the the Totals and Subtotals.
Please help me in regarding this..
Thanks in advance,
S.Gangi reddy.

hi,
check this report.
*& Report ZGM_ALV_SUBTOTAL_TEXT                                       *
*& Author :
*& Date :
*& Description :
*& Modification History
REPORT ZGM_ALV_SUBTOTAL_TEXT                   .
*& Table declaration
TABLES: ekko.
*& Type pool declaration
TYPE-POOLS: slis. " Type pool for ALV
*& Selection screen
SELECT-OPTIONS: s_ebeln FOR ekko-ebeln.
*& Type declaration
Type declaration for internal table to store EKPO data
TYPES: BEGIN OF x_data,
       ebeln TYPE char30, " Document no.
       ebelp TYPE ebelp,   " Item no
       matnr TYPE matnr,   " Material no
       matnr1 TYPE matnr,   " Material no
       werks TYPE werks_d, " Plant
       werks1 TYPE werks_d, " Plant
       ntgew TYPE entge,   " Net weight
       gewe   TYPE egewe,   " Unit of weight
       END OF x_data.
*& Internal table declaration
DATA:
i_ekpo TYPE STANDARD TABLE OF x_data INITIAL SIZE 0,
Internal table for storing field catalog information
i_fieldcat TYPE slis_t_fieldcat_alv,
Internal table for Top of Page info. in ALV Display
i_alv_top_of_page TYPE slis_t_listheader,
Internal table for ALV Display events
i_events TYPE slis_t_event,
Internal table for storing ALV sort information
i_sort TYPE slis_t_sortinfo_alv,
i_event TYPE slis_t_event.
*& Work area declaration
DATA:
wa_ekko TYPE x_data,
wa_layout     TYPE slis_layout_alv,
wa_events         TYPE slis_alv_event,
wa_sort TYPE slis_sortinfo_alv.
*& Constant declaration
CONSTANTS:
   c_header   TYPE char1
              VALUE 'H',                    "Header in ALV
   c_item     TYPE char1
              VALUE 'S'.
*& Start-of-selection event
START-OF-SELECTION.
Select data from ekpo
SELECT ebeln " Doc no
         ebelp " Item
         matnr " Material
         matnr " Material
         werks " Plant
         werks " Plant
         ntgew " Quantity
         gewei " Unit
         FROM ekpo
         INTO TABLE i_ekpo
         WHERE ebeln IN s_ebeln
         AND ntgew NE '0.00'. IF sy-subrc = 0.
    SORT i_ekpo BY ebeln ebelp matnr .
ENDIF.
To build the Page header
PERFORM sub_build_header. "* To prepare field catalog
PERFORM sub_field_catalog. "* Perform to populate the layout structure
PERFORM sub_populate_layout."* Perform to populate the sort table.
PERFORM sub_populate_sort."* Perform to populate ALV event
PERFORM sub_get_event.
END-OF-SELECTION.
* Perform to display ALV report
PERFORM sub_alv_report_display.
*&      Form sub_build_header
      To build the header
      No Parameter
FORM sub_build_header .
Local data declaration
DATA: l_system     TYPE char10 ,          "System id
        l_r_line     TYPE slis_listheader, "Hold list header
        l_date       TYPE char10,           "Date
        l_time       TYPE char10,           "Time
        l_success_records TYPE i,           "No of success records
        l_title(300) TYPE c.                " Title
Title Display
l_r_line-typ = c_header.               " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR l_r_line.
* Run date Display
CLEAR l_date.
l_r_line-typ = c_item.                " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO i_alv_top_of_page.
CLEAR: l_r_line,
         l_date.ENDFORM.                    " sub_build_header
*&      Form sub_field_catalog
      Build Field Catalog
      No Parameter
FORM sub_field_catalog .
Build Field Catalog
PERFORM sub_fill_alv_field_catalog USING:     '01' '01' 'EBELN'
'I_EKPO' 'L'
     'Doc No'(003) ' ' ' ' ' ' ' ',     '01' '02' 'EBELP' 'I_EKPO' 'L'
     'Item No'(004) 'X' 'X' ' ' ' ',     '01' '03' 'MATNR' 'I_EKPO' 'L'
     'Material No'(005) 'X' 'X' ' ' ' ',     '01' '03' 'MATNR1' 'I_EKPO'
     'L'
     'Material No'(005) ' ' ' ' ' ' ' ',
     '01' '04' 'WERKS' 'I_EKPO' 'L'
     'Plant'(006) 'X' 'X' ' ' ' ',     '01' '04' 'WERKS1' 'I_EKPO' 'L'
     'Plant'(006) ' ' ' ' ' ' ' ',     '01' '05' 'NTGEW' 'I_EKPO' 'R'
     'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'.ENDFORM.
" sub_field_catalog*&----
*&     Form sub_fill_alv_field_catalog
*&     For building Field Catalog
*&     p_rowpos   Row position
*&     p_colpos   Col position
*&     p_fldnam   Fldname
*&     p_tabnam   Tabname
*&     p_justif   Justification
*&     p_seltext Seltext
*&     p_out      no out
*&     p_tech     Technical field
*&     p_qfield   Quantity field
*&     p_qtab     Quantity table
FORM sub_fill_alv_field_catalog USING p_rowpos    TYPE sycurow
                                        p_colpos    TYPE sycucol
                                        p_fldnam    TYPE fieldname
                                        p_tabnam    TYPE tabname
                                        p_justif    TYPE char1
                                        p_seltext   TYPE dd03p-scrtext_l
                                        p_out       TYPE char1
                                        p_tech      TYPE char1
                                        p_qfield    TYPE slis_fieldname
                                        p_qtab      TYPE slis_tabname.
                                       Local declaration for field
                                       catalog
DATA: wa_lfl_fcat    TYPE slis_fieldcat_alv.
wa_lfl_fcat-row_pos        = p_rowpos.     "Row
wa_lfl_fcat-col_pos        = p_colpos.     "Column
wa_lfl_fcat-fieldname      = p_fldnam.     "Field Name
wa_lfl_fcat-tabname        = p_tabnam.     "Internal Table Name
wa_lfl_fcat-just           = p_justif.     "Screen Justified
wa_lfl_fcat-seltext_l      = p_seltext.    "Field Text
wa_lfl_fcat-no_out         = p_out.        "No output
wa_lfl_fcat-tech           = p_tech.       "Technical field
wa_lfl_fcat-qfieldname     = p_qfield.     "Quantity unit
wa_lfl_fcat-qtabname       = p_qtab .
"Quantity table
IF p_fldnam = 'NTGEW'.
    wa_lfl_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_lfl_fcat TO i_fieldcat.
CLEAR wa_lfl_fcat.
ENDFORM.
" sub_fill_alv_field_catalog*&----
*&      Form sub_populate_layout
      Populate ALV layout
      No Parameter
FORM sub_populate_layout . CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'.
" Optimization of Col width
ENDFORM. " sub_populate_layout*&----
*&      Form sub_populate_sort
      Populate ALV sort table
      No Parameter
FORM sub_populate_sort .
Sort on material
wa_sort-spos = '01' .
wa_sort-fieldname = 'MATNR'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
Sort on plant
wa_sort-spos = '02'.
wa_sort-fieldname = 'WERKS'.
wa_sort-tabname = 'I_EKPO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.
" sub_populate_sort*&----
*&      Form sub_get_event
      Get ALV grid event and pass the form name to subtotal_text
      event
      No Parameter
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'. DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 4
    IMPORTING
      et_events       = i_event
    EXCEPTIONS
      list_type_wrong = 0
      OTHERS          = 0.
Subtotal
READ TABLE i_event INTO l_s_event
                    WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
    MOVE c_formname_subtotal_text TO l_s_event-form.
    MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.ENDFORM.
" sub_get_event*&----
*&      Form sub_alv_report_display
      For ALV Report Display
      No Parameter
FORM sub_alv_report_display .
DATA: l_repid TYPE syrepid .
l_repid = sy-repid .
This function module for displaying the ALV
report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = l_repid
      i_callback_top_of_page   = 'SUB_ALV_TOP_OF_PAGE'
      is_layout                = wa_layout
      it_fieldcat              = i_fieldcat
      it_sort = i_sort
      it_events                = i_event
      i_default                = 'X'
      i_save                   = 'A'
    TABLES
      t_outtab                 = i_ekpo
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
   MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.
ENDFORM.
" sub_alv_report_display*&----
      FORM sub_alv_top_of_page
      Call ALV top of page
      No parameter
FORM sub_alv_top_of_page.                                   "#EC CALLED*
*To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_alv_top_of_page.
ENDFORM.
"alv_top_of_page*&----
*&      Form subtotal_text
      Build subtotal text
      P_total Total
      p_subtot_text Subtotal text info
FORM subtotal_text CHANGING
               p_total TYPE any
               p_subtot_text TYPE slis_subtot_text.
Material level sub total
IF p_subtot_text-criteria = 'MATNR'.
    p_subtot_text-display_text_for_subtotal
    = 'Material level total'(009).
ENDIF.
Plant level sub total
IF p_subtot_text-criteria = 'WERKS'.
    p_subtot_text-display_text_for_subtotal = 'Plant level total'(010).
ENDIF.
ENDFORM.                    "subtotal_textSelection screen:
\[removed by moderator\]
Edited by: Jan Stallkamp on Sep 3, 2008 6:17 PM

Creation of Sub-Totals within Groups

Hi - hope this is me just being a plank but I've hit a brick wall whilst trying to recreate a set of management accounts. So far the report has just two Groups - call them A & B for ease. Group B summarizes the detail and Group A neatly collects the results from Group B.
Group A comprises 6 parts all doing their bit and all the standard Crystal Sub-Totals (Summaries) work just fine. The problem I encounter is when I need to insert another Sub-Total into Group A which summarizes multiple parts of Group A e.g. Part 1 is Sales, Part 2 is Cost of sales, Part 3 is Labour, Part 4 is Expenses, Part 5 is Other and Part 6 is Depreciation. I need to insert a Sub-Total between Parts 3 and 4 which basically gives a total of Sales minus Cost of Sales minus Labour and to then continue with Parts 4 to 6. This is obviously a huge simplification of the issue but an answer to this would let me proceed with everything else.
I've tried creating an line so I can add a formula for this by giving it a name of its own in Group A but it fails to appear on the report. I've also tried the 'Insert Section Below' option and whilst I can suppress it where necessary the formula just picks up values from the last entry on the Detail Section.
Any ideas where I am making some elementary mistakes and is there an easy solution? Many thanks

Hi,
Try to create a manual running total formula for summing the fields with a condition.
Create a @reset formula and place it report header:
formula:
whileprintingrecords;
numbervar i:=0;
Create a @eval formula and place it in group header A:
formula:
whileprintingrecords;
numbervar i;
if {groupname.field} = 'Labour' or {groupname.field} = 'Expenses' then
i:= i + {summary.field};
Create a @display formula and place it in report footer;
formula:
whileprintingrecords;
numbervar i;
Hope this helps!
Regards,
Vinay

T-code or Table to find total errors in SAP APO like ST22 in ABAP

hi all,
Could please tell me the T-code or Table to find total errors in SAP APO like ST22 t-code in SAP ABAP.
Thanks.
Suryam S

Hello Venu,
Do you mean other functional errors?
You can check SLG1, /SAPAPO/C3, STAD
Best Regards,
R.Brahmankar

Alv sub total problem

hi,
in alv i want sub total text for purchase order.
can you check my code . i am not getting.
TYPE-POOLS: slis.
TABLES: ekko,ekpo,eket.
TYPES: BEGIN OF ty_ekko,
        lifnr TYPE elifn,
        ebeln TYPE ebeln,
        ebeln1 TYPE ebeln,
        bsart TYPE esart,
        ekorg TYPE ekorg,
        ekgrp TYPE bkgrp,
        ernam TYPE ernam,
       END OF ty_ekko,
       BEGIN OF ty_ekpo,
        ebeln TYPE ebeln,
        matnr TYPE matnr,
        ebelp TYPE ebelp,
        ebelp1 TYPE ebelp,
        menge TYPE bstmg,
        meins TYPE bstme,
        netpr TYPE bprei,
        werks TYPE ewerk,
       END OF ty_ekpo,
       BEGIN OF ty_eket,
        ebeln TYPE ebeln,
        ebelp TYPE ebelp,
        etenr TYPE eeten,
        eindt TYPE eindt,
       END OF ty_eket,
       BEGIN OF ty_final,
        slno TYPE sy-dbcnt,
        lifnr TYPE elifn,
        ebeln TYPE ebeln,
        ebeln1 TYPE ebeln,
        bsart TYPE esart,
        ekorg TYPE ekorg,
        ekgrp TYPE bkgrp,
        ernam TYPE ernam,
        matnr TYPE matnr,
        ebelp TYPE ebelp,
        ebelp1 TYPE ebelp,
        menge TYPE bstmg,
        meins TYPE bstme,
        netpr TYPE bprei,
        werks TYPE ewerk,
        eindt TYPE eindt,
       END OF ty_final.
DATA: it_ekko TYPE STANDARD TABLE OF ty_ekko,
      it_ekpo TYPE STANDARD TABLE OF ty_ekpo,
      it_eket TYPE STANDARD TABLE OF ty_eket,
      it_final TYPE STANDARD TABLE OF ty_final,
      it_fieldcat TYPE slis_t_fieldcat_alv,
      it_alv_top_of_page TYPE slis_t_listheader,
      it_sort TYPE slis_t_sortinfo_alv,
      it_event TYPE slis_t_event,
      l_repid TYPE syrepid,
      slno TYPE i VALUE 1.
DATA: wa_ekko TYPE ty_ekko,
      wa_ekpo TYPE ty_ekpo,
      wa_eket TYPE ty_eket,
      wa_final TYPE ty_final,
      wa_fieldcat TYPE slis_fieldcat_alv,
      wa_alv_top_of_page TYPE slis_listheader,
      wa_sort TYPE slis_sortinfo_alv,
      wa_layout   TYPE slis_layout_alv.
     wa_event TYPE slis_alv_event.
CONSTANTS:
   c_header   TYPE char1
              VALUE 'H',                    "Header in ALV
   c_item     TYPE char1
              VALUE 'S'.
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_aedat FOR ekko-aedat.
SELECTION-SCREEN END OF BLOCK blk.
START-OF-SELECTION.
PERFORM validation.
PERFORM retrive_data.
PERFORM sub_build_header.
PERFORM sub_field_catalog.
PERFORM sub_populate_layout.
PERFORM sub_populate_sort.
PERFORM sub_get_event.
*END-OF-SELECTION.
Perform to display ALV report
PERFORM sub_alv_report_display.
*FORM validation .
SELECT SINGLE * FROM ekko WHERE aedat IN s_aedat .
IF sy-subrc <> 0.
   MESSAGE e001(zram).
ENDIF.
*ENDFORM.                    " validation
FORM retrive_data .
SELECT lifnr
         ebeln
         ebeln
         bsart
         ekorg
         ekgrp
         ernam FROM ekko INTO TABLE it_ekko
        INTO CORRESPONDING FIELDS OF TABLE it_ekko
         WHERE aedat IN s_aedat .
IF it_ekko[] IS NOT INITIAL.
    SELECT ebeln
           ebelp
           ebelp
           matnr
           menge
           meins
           netpr
           werks FROM ekpo
           INTO corresponding fields of TABLE it_ekpo
           FOR ALL ENTRIES IN it_ekko
           WHERE ebeln = it_ekko-ebeln .
      if sy-subrc = 0.
         SELECT ebeln
           ebelp
           etenr
           eindt
           FROM eket INTO TABLE it_eket
           FOR ALL ENTRIES IN it_ekpo
           WHERE ebeln = it_ekpo-ebeln .
        endif.
ENDIF.
ENDIF.
LOOP AT it_ekko INTO wa_ekko.
    READ TABLE it_ekpo INTO wa_ekpo
                          WITH KEY ebeln = wa_ekko-ebeln.
    READ TABLE it_eket INTO wa_eket
                            WITH KEY ebeln = wa_ekpo-ebeln.
    wa_final-slno = slno.
    wa_final-lifnr = wa_ekko-lifnr.
    wa_final-ebeln = wa_ekko-ebeln.
    wa_final-bsart = wa_ekko-bsart.
    wa_final-ekgrp = wa_ekko-ekgrp.
    wa_final-ekorg = wa_ekko-ekorg.
    wa_final-ernam = wa_ekko-ernam.
    wa_final-ebelp = wa_ekpo-ebelp.
    wa_final-matnr = wa_ekpo-matnr.
    wa_final-menge = wa_ekpo-menge.
    wa_final-meins = wa_ekpo-meins.
    wa_final-netpr = wa_ekpo-netpr.
    wa_final-werks = wa_ekpo-werks.
    wa_final-eindt = wa_eket-eindt.
    slno = slno + 1.
    APPEND wa_final TO it_final.
ENDLOOP.
ENDFORM.                    " retrive_data
FORM sub_build_header .
Local data declaration
DATA: l_system     TYPE char10 ,          "System id
        l_r_line     TYPE slis_listheader, "Hold list header
        l_date       TYPE char10,           "Date
        l_time       TYPE char10,           "Time
        l_success_records TYPE i,           "No of success records
        l_title(300) TYPE c.                " Title
Title Display
l_r_line-typ = c_header.               " header
l_title = 'Test report'(001).
l_r_line-info = l_title.
APPEND l_r_line TO it_alv_top_of_page.
CLEAR l_r_line.
Run date Display
CLEAR l_date.
l_r_line-typ = c_item.                " Item
WRITE: sy-datum TO l_date MM/DD/YYYY.
l_r_line-key = 'Run Date :'(002).
l_r_line-info = l_date.
APPEND l_r_line TO it_alv_top_of_page.
CLEAR: l_r_line,
         l_date.
ENDFORM.                    " sub_build_header
FORM sub_field_catalog .
REFRESH it_fieldcat.
wa_fieldcat-row_pos        = '01'. " p_rowpos.     "Row
wa_fieldcat-col_pos        = '01'.       "p_colpos.     "Column
wa_fieldcat-fieldname      = 'SLNO'.       "p_fldnam.     "Field Name
wa_fieldcat-tabname        = 'IT_FINAL'.      "p_tabnam.     "Internal Table Name
wa_fieldcat-just           = ' '.       "p_justif.     "Screen Justified
wa_fieldcat-seltext_l      = 'SLNo'.       "p_seltext.    "Field Text
wa_fieldcat-do_sum         = ' '.
wa_fieldcat-outputlen      = '4'    .
wa_fieldcat-no_out         = ' '.       "p_out.        "No output
wa_fieldcat-tech           = ' '.      "p_tech.       "Technical field
wa_fieldcat-qfieldname     = ' '.       "p_qfield.     "Quantity unit
wa_fieldcat-qtabname       = ' '.       "p_qtab .      "Quantity table
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-row_pos        = '01'. " p_rowpos.     "Row
wa_fieldcat-col_pos        = '02'.       "p_colpos.     "Column
wa_fieldcat-fieldname      = 'LIFNR'.       "p_fldnam.     "Field Name
wa_fieldcat-tabname        = 'IT_FINAL'.      "p_tabnam.     "Internal Table Name
wa_fieldcat-just           = ' '.       "p_justif.     "Screen Justified
wa_fieldcat-seltext_l      = 'Supplier Name'.       "p_seltext.    "Field Text
wa_fieldcat-do_sum         = ' '.
wa_fieldcat-outputlen      = '12'    .
wa_fieldcat-no_out         = ' '.       "p_out.        "No output
wa_fieldcat-tech           = ' '.      "p_tech.       "Technical field
wa_fieldcat-qfieldname     = ' '.       "p_qfield.     "Quantity unit
wa_fieldcat-qtabname       = ' '.       "p_qtab .      "Quantity table
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-row_pos        = '01'. " p_rowpos.     "Row
wa_fieldcat-col_pos        = '03'.       "p_colpos.     "Column
wa_fieldcat-fieldname      = 'EBELN'.       "p_fldnam.     "Field Name
wa_fieldcat-tabname        = 'IT_FINAL'.      "p_tabnam.     "Internal Table Name
wa_fieldcat-just           = ' '.       "p_justif.     "Screen Justified
wa_fieldcat-seltext_l      = 'PO No'.       "p_seltext.    "Field Text
wa_fieldcat-do_sum         = ' '.
wa_fieldcat-outputlen      = '15'    .
wa_fieldcat-no_out         = ' '.       "p_out.        "No output
wa_fieldcat-tech           = ' '.      "p_tech.       "Technical field
wa_fieldcat-qfieldname     = ' '.       "p_qfield.     "Quantity unit
wa_fieldcat-qtabname       = ' '.       "p_qtab .      "Quantity table
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-row_pos        = '01'. " p_rowpos.     "Row
wa_fieldcat-col_pos        = '03'.       "p_colpos.     "Column
wa_fieldcat-fieldname      = 'EBELN1'.       "p_fldnam.     "Field Name
wa_fieldcat-tabname        = 'IT_FINAL'.      "p_tabnam.     "Internal Table Name
wa_fieldcat-just           = ' '.       "p_justif.     "Screen Justified
wa_fieldcat-seltext_l      = 'PO No'.       "p_seltext.    "Field Text
wa_fieldcat-do_sum         = ' '.
wa_fieldcat-no_out         = ' '.       "p_out.        "No output
wa_fieldcat-tech           = 'X'.      "p_tech.       "Technical field
wa_fieldcat-qfieldname     = ' '.       "p_qfield.     "Quantity unit
wa_fieldcat-qtabname       = ' '.       "p_qtab .      "Quantity table
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM.                    " sub_field_catalog
FORM sub_populate_layout .
CLEAR wa_layout.
wa_layout-colwidth_optimize = 'X'." Optimization of Col width
ENDFORM.                    " sub_populate_layout
FORM sub_populate_sort .
Sort on material
wa_sort-spos      = '01' .
wa_sort-fieldname = 'EBELN'.
wa_sort-tabname   = 'IT_FINAL'.
wa_sort-up        = 'X'.
wa_sort-subtot    = 'X'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
Sort on plant
wa_sort-spos      = '02'.
wa_sort-fieldname = 'EBELP'.
wa_sort-tabname   = 'IT_FINAL'.
wa_sort-up        = 'X'.
wa_sort-subtot    = 'X'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
ENDFORM.                    " sub_populate_sort
FORM sub_get_event .
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
                                                  'SUBTOTAL_TEXT'.
data : wa_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 4
    IMPORTING
      et_events       = it_event
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Subtotal
READ TABLE it_event INTO wa_event
                    WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
    MOVE c_formname_subtotal_text TO wa_event-form.
    MODIFY it_event FROM wa_event INDEX sy-tabix.
ENDIF.
ENDFORM.                    " sub_get_event
FORM sub_alv_report_display .
l_repid = sy-repid .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
     i_callback_program                = l_repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
     i_callback_top_of_page            = 'SUB_ALV_TOP_OF_PAGE'
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
   is_layout                         = wa_layout
   it_fieldcat                       = it_fieldcat
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
   it_sort                           = it_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
i_default                         = 'X'
i_save                            = 'A'
IS_VARIANT                        =
IT_EVENTS                         = i_event
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
I_HTML_HEIGHT_TOP                 = 0
I_HTML_HEIGHT_END                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it_final
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " sub_alv_report_display
FORM sub_alv_top_of_page.                                   "#EC CALLED
To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = it_alv_top_of_page.
ENDFORM.                    "alv_top_of_page
FORM subtotal_text CHANGING
               p_total TYPE any
               p_subtot_text TYPE slis_subtot_text.
Material level sub total
IF p_subtot_text-criteria = 'EBELN'.
    p_subtot_text-display_text_for_subtotal
    = 'The Nett price of PO No'(009).
ENDIF.
Plant level sub total
IF p_subtot_text-criteria = 'EBELP'.
    p_subtot_text-display_text_for_subtotal = 'Total Purchase Order value placed'(010).
ENDIF.
ENDFORM.                    "subtotal_text

hi ,
try the given below code ...
"*************INTERNAL TABLE FR SORTING***********************
DATA: it_sort TYPE slis_t_sortinfo_alv.
"******** WORK AREA FR FIELD CATALOG *************************
DATA: wa_sort TYPE slis_sortinfo_alv.
   wa_sort-fieldname = 'EBELN'."field name
wa_sort-tabname = 'IT_TAB'."internal table name
wa_sort-up = 'X'.
wa_sort-subtot ='X'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_sort                           = it_sort
ENDFORM.                    "alv
hope this helps
Regards
RItesh J

Only sub total in alv report

hi,
I have a report on ALV with sub totals for some fields, it is working fine but my requirement is whether i can get only the sub totals of that report.
regards,
Prabhu

HI
refer this code.
REPORT ZALV.
TYPE-POOLS: SLIS.
DATA: G_REPID LIKE SY-REPID,
GS_PRINT            TYPE SLIS_PRINT_ALV,
GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
GT_EVENTS           TYPE SLIS_T_EVENT,
GT_SORT             TYPE SLIS_T_SORTINFO_ALV,
GS_LAYOUT           TYPE SLIS_LAYOUT_ALV,
GT_FIELDCAT         TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF GT_FIELDCAT,
COL_POS TYPE I.
DATA: BEGIN OF ITAB,
FIELD1(5) TYPE C,
FIELD2(5) TYPE C,
FIELD3(5) TYPE P DECIMALS 2,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB1.
DATA: BEGIN OF ITAB_FIELDCAT OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB_FIELDCAT.
Print Parameters
PARAMETERS:
            P_PRINT AS CHECKBOX DEFAULT ' ', "PRINT IMMEDIATE
            P_NOSINF AS CHECKBOX DEFAULT 'X', "NO SELECTION INFO
            P_NOCOVE AS CHECKBOX DEFAULT ' ', "NO COVER PAGE
            P_NONEWP AS CHECKBOX DEFAULT ' ', "NO NEW PAGE
            P_NOLINF AS CHECKBOX DEFAULT 'X', "NO PRINT LIST INFO
            P_RESERV TYPE I.                  "NO OF FOOTER LINE
INITIALIZATION.
G_REPID = SY-REPID.
PERFORM PRINT_BUILD    USING GS_PRINT.      "Print PARAMETERS
START-OF-SELECTION.
TEST DATA
MOVE 'TEST1' TO ITAB1-FIELD1.
MOVE 'TEST1' TO ITAB1-FIELD2.
MOVE '10.00' TO ITAB1-FIELD3.
APPEND ITAB1.
MOVE 'TEST2' TO ITAB1-FIELD1.
MOVE 'TEST2' TO ITAB1-FIELD2.
MOVE '20.00' TO ITAB1-FIELD3.
APPEND ITAB1.
DO 50 TIMES.
APPEND ITAB1.
ENDDO.
END-OF-SELECTION.
PERFORM BUILD.
PERFORM EVENTTAB_BUILD CHANGING GT_EVENTS.
PERFORM COMMENT_BUILD CHANGING GT_LIST_TOP_OF_PAGE.
PERFORM CALL_ALV.
FORM BUILD.
DATA FIELD CATALOG
Explain Field Description to ALV
DATA: FIELDCAT_IN TYPE SLIS_FIELDCAT_ALV.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD1'.
FIELDCAT_LN-TABNAME   = 'ITAB1'.
*FIELDCAT_LN-NO_OUT    = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
FIELDCAT_LN-KEY       = ' '.   "SUBTOTAL KEY
FIELDCAT_LN-NO_OUT    = ' '.
FIELDCAT_LN-SELTEXT_L = 'HEAD1'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD2'.
FIELDCAT_LN-TABNAME   = 'ITAB1'.
FIELDCAT_LN-NO_OUT    = 'X'.
FIELDCAT_LN-SELTEXT_L = 'HEAD2'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME     = 'FIELD3'.
FIELDCAT_LN-TABNAME       = 'ITAB1'.
FIELDCAT_LN-REF_FIELDNAME = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
FIELDCAT_LN-REF_TABNAME   = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
FIELDCAT_LN-NO_OUT        = ' '.
FIELDCAT_LN-DO_SUM        = 'X'.   "SUM UPON DISPLAY
APPEND FIELDCAT_LN TO GT_FIELDCAT.
DATA SORTING AND SUBTOTAL
DATA: GS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD1'.
GS_SORT-SPOS      = 1.
GS_SORT-UP        = 'X'.
GS_SORT-SUBTOT    = 'X'.
APPEND GS_SORT TO GT_SORT.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD2'.
GS_SORT-SPOS      = 2.
GS_SORT-UP        = 'X'.
*GS_SORT-SUBTOT    = 'X'.
APPEND GS_SORT TO GT_SORT.
ENDFORM.
FORM CALL_ALV.
ABAP List Viewer
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = 'ITAB1'
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = GT_SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = GT_EVENTS[]
IT_EVENT_EXIT =
IS_PRINT = GS_PRINT
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM.
HEADER FORM
FORM EVENTTAB_BUILD CHANGING LT_EVENTS TYPE SLIS_T_EVENT.
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            I_LIST_TYPE = 0
       IMPORTING
            ET_EVENTS   = LT_EVENTS.
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
define END_OF_PAGE event
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
                         INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
ENDFORM.
FORM COMMENT_BUILD CHANGING GT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: GS_LINE TYPE SLIS_LISTHEADER.
CLEAR GS_LINE.
GS_LINE-TYP = 'H'.
GS_LINE-INFO = 'HEADER 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
CLEAR GS_LINE.
GS_LINE-TYP = 'S'.
GS_LINE-KEY = 'STATUS 1'.
GS_LINE-INFO = 'INFO 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
GS_LINE-KEY = 'STATUS 2'.
GS_LINE-INFO = 'INFO 2'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
CLEAR GS_LINE.
GS_LINE-TYP = 'A'.
GS_LINE-INFO = 'ACTION'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
ENDFORM.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
WRITE: SY-DATUM, 'Page No', SY-PAGNO LEFT-JUSTIFIED.
ENDFORM.
FORM END_OF_PAGE.
WRITE at (sy-linsz) sy-pagno CENTERED.
ENDFORM.
PRINT SETTINGS
FORM PRINT_BUILD USING LS_PRINT TYPE SLIS_PRINT_ALV.
LS_PRINT-PRINT              = P_PRINT. "PRINT IMMEDIATE
LS_PRINT-NO_PRINT_SELINFOS = P_NOSINF. "NO SELECTION INFO
LS_PRINT-NO_COVERPAGE       = P_NOCOVE. "NO COVER PAGE
LS_PRINT-NO_NEW_PAGE        = P_NONEWP.
LS_PRINT-NO_PRINT_LISTINFOS = P_NOLINF. "NO PRINT LIST INFO
LS_PRINT-RESERVE_LINES      = P_RESERV.
ENDFORM.
*END OF ZALV PROGRAM
Reward all helpfull answers.
Regards.
Jay

Sub total wise Grand total in ALV report

Dear All,
I am displaying a list of material through material group wise so for each material i want to display sub-total for stock and grand total of stock(material group wise).Here it is adding up all the stock displayed for different AUOM(alternative unit of measure ) which is for same material so i want to pick only the sub-total and sum up in my Grand total.
How to pick only the Sub-total Results and Add in ALV List for Grand total.
Thanks & Regards,
Arun.
Edited by: Arun Kumaran on Sep 24, 2008 7:46 AM

Hi arun,
check these links
total and subtotal in alv
ALV SUBTOTAL
Regards,
Anirban

Hide grand total field on ALV report, But keep the sub total fields

Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document.

Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document.

Sub total error in BEX

Similar Messages

Maybe you are looking for