Sub Total Field to be bold in a ALV report
Dear Experts,
Thanks for your help till date.
I have an issue with an ALV report where the sub total field is coming, it is highlited and showing in Bold. But when I take the print of that particular report, the sub total field is not coming in bold. Is there any way to make the sub total field bold in an ALV report and the print also the same.
Regards
OP
Hello Experts,
Any replies for the above Scenarios...
Waiting for your's valuable Feedback
Regards
Om Prakash gupta
Similar Messages
-
Hide grand total field on ALV report, But keep the sub total fields
Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document.Dear Experts,
1) How to hide grand total field on ALV report, But keep the sub total fields.
2) How to populate rate per ton & calculate total price according to the qty in delivering document. -
Populate the KZWI1 to 6 fields (Sub-Total fields) in VBAP, in VA01
Hello,
Am looking to populate the KZWI1, KZWI2, KZWI3, KZWI4, KZWI5 and KZWI6 fields (Sub-Total fields) in VBAP, while in the process of creation of Sales Order - VA01.
So, Is MOVE_FIELDS_TO_VBAP is a good/appropriate user-exit for me?
Thank you.certainly userexit_move_field_to_vbap in MV45AFZZ will allow you to change the values of VBAP fields during order creation.
I do have concerns about fields KZWI1 etc, as they are subtotal fields on the pricing conditions and consequently derived.
But yes you should be able to change them here. -
Meaning and purpose of Sub Total field in Pricing
Hi Gurus,
Could you please explore what's the purpose of sub total field in pricing.
In standard pricing, why we keep Sub total 'S' in MM pricing or 2 if its additional duty and where these sub totals makes impact.
Regards
VivekHi,
Subtotal: -
u2022 The value of this field determines where the values of subtotals to be captured i.e. in which table and which field.
u2022 Controls whether and in which fields condition amounts or subtotals (for example, a customer discount or the cost of a material) are stored.
u2022 If the same fields are used to store different condition amounts, the system totals the individual amounts.
u2022 These condition amounts or subtotals are used as a starting point for further calculations. You may, for example, want a subtotal of all the discounts included in the pricing of a sales order.
Once you assign the below Subtotals in MM Pricing, it will carry over the values to EKPO Table in relevant fields, you can use these fields for calculations, in routines and also in report developments.
1 Carry over value to KOMP-KZWI1
2 Carry over value to KOMP-KZWI2
3 Carry over value to KOMP-KZWI3
4 Carry over value to KOMP-KZWI4
5 Carry over value to KOMP-KZWI5
6 Carry over value to KOMP-KZWI6
For e.g. if you assign subtotal "D" (XWORKD) to one condition and "E" (XWORKE) to another and create a subtotal line in pricing and assign AltCty as 12 to this line then system will give value for this line as XWORKD - XWORKE.
For e.g.
In Calculation Schema;
ZCT1 = 10000 (Subtotal "D" - XWORKD)
ZCT2 = 9000 (Subtotal "E" - XWORKE)
Subtotal = 1000 (AltCty - 12)
You can check existing routines in VOFM and also create new. -
Field description in two line in ALV report
Hi ,
In ALV report I want the description for each field to be displayed in two lines . For example
the description for field matnr is " Material No for grade A " which is displayed in one line . But i want to display it as : Material No
for grade A
in two lines . Is it possible . Please help me out .
NeeteshHi Neetesh,
Its not possible to display as you like in 2 lines header for single column. But i can provide the alternative way , it won't good logically. Please try the following logic.
Let suppose you have 10 fields F1-f10. Each field has the 2 lines header. So take 20fields in your fields catalog ie take 10 dummy fields which are equal lenght of the fields F1-f10. and for the last 10 fields(F11-F20) set the row pos as 2, set the second line header to these field(F11-F20). So you will succed to display the 2 level header for single column. But the problem here is you will get one empty row additional row for each row. Because you have taken (F11-F20) fields are dummy and don't have the data also. This solution will works only in the case of ALV List display not in Grid Display.
But Before that tell to your customer about this problem , Because I have done the same things when my customer giving important to 2 lines header and he accepeted that also.
If suppose you have the data in 2 lines for each column then this solution will work fine. Thats what i implemented in my ALV Report.
Warm Regards,
Vijay. -
How to add 2 more field to the Header of FBL5N ALV report output
Hi All,
I have copied and made some modification to the standard transaction FBL5N and added some fields to the ALV report line Items but how to add fields to the header part i.e if you execute the transaction FBL5n, you will get the ALV report, in the header part customer no, company code then I need to add the 2 more fields. can any one tell me that which structure or where I need to add these fields to be appear in ALV output screen.
Thanks in advance.
Swapna.Hi Mohamed,
If you copied Z-FM successfully, then you have to go to subroutine TOP_OF_PAGE to add your field:
*& Form TOP_OF_PAGE
FORM top_of_page.
DATA: b_suppress LIKE boole-boole,
opfi_text LIKE eptext OCCURS 10 WITH HEADER LINE,
n_color TYPE i.
* IF NOT it_items-bukrs IS INITIAL "737295
* AND NOT it_items-konto IS INITIAL "737295
* AND NOT it_items-koart IS INITIAL. "737295
gs_items = gt_alv.
* ENDIF. "737295
* skip first call at top of page:
IF NOT gd_first_top IS INITIAL.
CLEAR gd_first_top.
EXIT.
ENDIF.
IF x_grid = c_x OR x_inet = c_x. "1012201
PERFORM grid_top_of_page.
EXIT.
ENDIF.
*... open FI: get header text.
* first fill some RFXPO fields for general info:
CLEAR: s_rfxpo, wa_kna1, wa_lfa1, wa_ska1.
s_rfxpo-bukrs = gs_items-bukrs.
s_rfxpo-kkber = gs_items-kkber.
s_rfxpo-koart = gs_items-koart.
s_rfxpo-konto = gs_items-konto.
s_rfxpo-vrbez = gs_variant-variant.
s_rfxpo-waers = gs_items-waers.
* update master record:
PERFORM fill_master_rec USING gs_items-koart
gs_items-konto
gs_items-bukrs. " note 698396
CALL FUNCTION 'OPEN_FI_PERFORM_00001640_E'
EXPORTING
i_rfxpo = s_rfxpo
i_kna1 = wa_kna1
i_lfa1 = wa_lfa1
i_ska1 = wa_ska1
IMPORTING
e_suppress_standard = b_suppress
TABLES
t_lines = opfi_text.
*... display open FI text:
IF x_konto_sort = 'X'.
LOOP AT opfi_text.
CASE opfi_text-color.
WHEN 1.
FORMAT COLOR 1.
WHEN 2.
FORMAT COLOR 2.
WHEN 3.
FORMAT COLOR 3.
WHEN 4.
FORMAT COLOR 4.
WHEN 5.
FORMAT COLOR 5.
WHEN 6.
FORMAT COLOR 6.
WHEN 7.
FORMAT COLOR 7.
ENDCASE.
WRITE: / opfi_text-text.
ENDLOOP.
FORMAT RESET.
ENDIF.
*... display other header text:
IF b_suppress NE 'X'.
PERFORM display_custom_header.
PERFORM display_ccard_lines.
ENDIF.
" Put your field somewhere...
ENDFORM. " TOP_OF_PAGE
Good luck,
Thanks, -
How to add field to the header for FBL5N ALV report
Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
SwapnaYes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna -
How to make checkbox field inactive in the output of ALV report.
Dear All,
I am having one ALV report in whose output there are checkboxes against each record. Example: the output columns of my ALV report are:
Checkbox, Sales Document No, Billing Document No.
Now, my requirement is that if for the Sales Document No there exists any Billing Document No in the output then the Checkbox should be inactive but if the Billing document coloumn is empty for a particular Sales Document No then only the Checkbox field should become active.
Kindly guide me on how to make this checkbox field inactive.
Waiting for your reply.
Warm Regards,
N.JainHello,
Follow the below steps:
1.Define as--> GS_STATUS TYPE SLIS_STATUS,
2.check layout check box fieldname is not initial.
then set the status according to your logical conditions
GS_STATUS-FLG_CHECKBOXES_ACTIVE = 'X'
Hope this would help you.
Let me know your feedback.
Regards,
Raju -
Field column not found in the ALV Report
Hello all,
Sorry my problem is not solved.It is in hidden fields under the column set and it needs to be come
under displayed column for ever in the similar way the other fields like Bill to # , VAT registration number, company code etc. are getting dispalyed.
Thank you,
SirishaSnippet of the code
perform append_new_fieldcat USING:
'NAME1' 'TYPE_ALV' SPACE space 'Bill-To Name'
space space SPACE CHANGING ct_fieldcat.
FORM append_new_fieldcat
USING l_fieldname TYPE slis_fieldcat_alv-fieldname
l_ref_tabname TYPE slis_fieldcat_alv-ref_tabname
l_ref_fieldname TYPE slis_fieldcat_alv-ref_fieldname
l_cfieldname TYPE slis_fieldcat_alv-cfieldname
L_seltext TYPE SLIS_FIELDCAT_ALV-seltext_l
l_no_out TYPE slis_fieldcat_alv-no_out
l_no_zero TYPE slis_fieldcat_alv-no_zero
l_do_sum TYPE slis_fieldcat_alv-do_sum
CHANGING p_lt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: l_fieldcat TYPE slis_fieldcat_alv. "Field string
l_fieldcat-fieldname = l_fieldname.
l_fieldcat-ref_tabname = l_ref_tabname.
l_fieldcat-ref_fieldname = l_ref_fieldname.
l_fieldcat-cfieldname = l_cfieldname.
l_fieldcat-no_out = l_no_out.
l_fieldcat-no_zero = l_no_zero.
l_fieldcat-do_sum = l_do_sum.
if not l_seltext is initial.
move l_seltext to l_fieldcat-seltext_l.
move l_seltext to l_fieldcat-seltext_m.
move l_seltext to l_fieldcat-seltext_s.
MOVE 'L' TO L_FIELDCAt-ddictxt.
endif.
APPEND l_fieldcat TO p_lt_fieldcat.
ENDFORM. " append_new_fieldcat -
Urgent: regarding sub total button in alv report
hi,
i had made dis report and it is is fine till now,but now i want add the sub total field in it ,by making double click on the field sub-total should be displayed in it.
here is d code as i had tried the sub - total but when i execute it is giving some diferrent result.
*& Report ZTET2
REPORT ZTET2.
TABLES: ISEG,MARA.
TYPE-POOLS : SLIS.
DATA : DATE1(15) TYPE C,
DATE2(15) TYPE C,
TITLE(65) TYPE C,
DT(25) TYPE C.
DATA : ITEVENT TYPE SLIS_T_EVENT.
DATA: lv_sort TYPE slis_sortinfo_alv,
t_sort type slis_t_sortinfo_alv.
DATA : repid LIKE sy-repid.
INTERNAL TABLE FOR INVENTORY STOCK *****************
DATA: BEGIN OF ITS1 OCCURS 0,
MATNR LIKE ISEG-MATNR,
ITEMID(6) TYPE C,
MEINS LIKE ISEG-MEINS,
MENGE LIKE ISEG-MENGE,
WRTZL LIKE ISEG-WRTZL,
BUCHM LIKE ISEG-BUCHM,
WRTBM LIKE ISEG-WRTBM,
WERKS LIKE ISEG-WERKS,
BUDAT LIKE ISEG-BUDAT,
ZLDAT LIKE ISEG-ZLDAT,
MTART LIKE MARA-MTART,
ITEMDESC LIKE MAKT-MAKTX,
DIFFQTY LIKE ISEG-BUCHM,
DIFFVALUE LIKE ISEG-WRTBM,
GRUND LIKE ISEG-GRUND,
GRTXT LIKE T157E-GRTXT,
BWART LIKE T157E-BWART,
REAS TYPE C LENGTH 15,
END OF ITS1.
data: t_heading type slis_t_listheader.
SELECTION-SCREEN BEGIN OF BLOCK PAR1 WITH FRAME TITLE TEXT-001.
*SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
*********PARAMETERS*********
PARAMETERS : PLANT LIKE ISEG-WERKS OBLIGATORY.
*********SELECTION SCREEN OPTIONS*********
SELECT-OPTIONS : R_DATE FOR ISEG-BUDAT OBLIGATORY NO-EXTENSION,
M_TYPE FOR MARA-MTART,
IT_M FOR MARA-MATNR.
*********DEFINING VARIABLES*********
SELECTION-SCREEN END OF BLOCK par1.
CONCATENATE R_DATE-LOW6(2) '.' R_DATE-LOW4(2) '.' R_DATE-LOW+0(4) INTO DATE1.
CONCATENATE R_DATE-HIGH6(2) '.' R_DATE-HIGH4(2) '.' R_DATE-HIGH+0(4) INTO DATE2.
TOP-OF-PAGE.
PERFORM PG_HEADER.
START-OF-SELECTION.
SELECT AMATNR AMEINS AMENGE AWRTZL ABUCHM AWRTBM AWERKS ABUDAT AZLDAT BMTART AGRUND CBWART
FROM ISEG AS A INNER JOIN MARA AS B ON BMATNR = AMATNR
INNER JOIN MSEG AS C ON AMBLNR = CMBLNR
INTO CORRESPONDING FIELDS OF TABLE ITS1 WHERE BMATNR = AMATNR AND BMEINS = AMEINS AND AWERKS = PLANT AND ABUDAT IN R_DATE AND BMTART IN M_TYPE AND BMATNR IN IT_M.
LOOP AT ITS1.
ITS1-ITEMID = ITS1-MATNR+12(6).
ITS1-DIFFQTY = ITS1-MENGE - ITS1-BUCHM.
ITS1-DIFFVALUE = ITS1-WRTZL - ITS1-WRTBM.
SELECT SINGLE MAKTX FROM MAKT INTO ITS1-ITEMDESC WHERE MATNR = ITS1-MATNR.
SELECT SINGLE GRTXT INTO ITS1-GRTXT FROM T157E WHERE GRUND = ITS1-GRUND AND SPRAS = 'E' AND BWART = ITS1-BWART.
MODIFY ITS1.
ENDLOOP.
PERFORM PRN_SMSTOCK_ALV.
WRITING DATA FROM D TABLES**********
FORM PG_HEADER.
WRITE : 'PHYSICAL INVENTORY AUDIT REPORT PLANT : ', PLANT.
ENDFORM.
*& Form PRN_SMSTOCK_ALV
text
--> p1 text
<-- p2 text
form PRN_SMSTOCK_ALV .
data: w_title type lvc_title,
w_repid type syrepid,
w_comm type slis_formname,
w_status type slis_formname,
x_layout type slis_layout_alv,
t_event type slis_t_event,
t_fieldcat type slis_t_fieldcat_alv,
t_subtot TYPE slis_t_sortinfo_alv,
subtot LIKE LINE OF t_subtot.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
perform set_fieldcat2 using:
1 'MTART' 'MTART' 'MARA' '15' space 'MATERIAL TYPE' space space space space space space space space SPACE t_fieldcat 'L' 'L',
2 'ITEMID' 'ITEMID' 'MARA' '7' space 'ITEM ID' space space space space space space space space SPACE t_fieldcat 'R' 'C',
3 'ITEMDESC' 'MAKTX' 'MAKT' '25' space 'MATERIAL DESCRIPTION' space space space space space space space space SPACE t_fieldcat 'L' 'C',
4 'MEINS' 'MEINS' 'MARA' '5' space 'UOM' space space space space space space space space SPACE t_fieldcat 'C' 'C',
5 'MENGE' 'MENGE' 'ISEG' '13' space 'ORG.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',
6 'WRTZL' 'WRTZL' 'ISEG' '13' space 'ORG.INV.VALUE' space space space space space space space space SPACE t_fieldcat 'R' 'C',
7 'BUCHM' 'BUCHM' 'ISEG' '13' space 'PHY.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',
8 'WRTBM' 'WRTBM' 'ISEG' '13' space 'PHY.INV.VALUE' space space space space space space space space SPACE t_fieldcat 'R' 'C',
9 'DIFFQTY' 'MENGE' 'ISEG' '13' space 'DIFF.INV.QTY' space space space space space space space space SPACE t_fieldcat 'R' 'C',
10 'DIFFVALUE' 'WRTZL' 'ISEG' '13' space 'DIFF.INV.VALUE' space space space space space space space space SPACE t_fieldcat SPACE 'P',
11 'BUDAT' 'BUDAT' 'ISEG' '18' space 'CORRECTED DATE' space space space space space space space space SPACE t_fieldcat 'C' 'C',
12 'GRTXT' 'GRTXT' 'ISEG' '18' space 'REASON' space space space space space space space space SPACE t_fieldcat 'L' 'L',
13 'REAS' 'REAS' 'ISEG' '18' space 'AUTH.BY' space space space space space space space space SPACE t_fieldcat 'C' 'C'.
x_layout-zebra = 'X'.
perform set_top_page_heading using t_heading t_event.
perform set_events using t_event.
perform get_subtotals.
w_status = ''.
w_repid = sy-repid.
w_comm = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = w_repid
it_fieldcat = t_fieldcat
i_Callback_top_of_page = 'Top-of-page'
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
tables
t_outtab = ITS1
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM.
FORM set_fieldcat2 USING
p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
p_subtot
t_fieldcat TYPE slis_t_fieldcat_alv
P_JUST
P_FTYPE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
wa_fieldcat-t_subtot = p_subtot.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
IF NOT P_JUST IS INITIAL.
WA_FIELDCAT-JUST = P_JUST.
ENDIF.
IF NOT p_edit IS INITIAL.
wa_fieldcat-Input = 'X'.
wa_fieldcat-edit = 'X'.
wa_fieldcat-do_sum = 'x'.
wa_fieldcat-p_subtot = 'x'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
======================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_heading.
ENDFORM.
form set_top_page_heading using t_heading type slis_t_listheader
t_events type slis_t_event.
data: x_heading type slis_listheader,
x_event type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = 'PHYSICAL INVENTORY AUDIT REPORT'.
append x_heading to t_heading.
Plant Name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'PLANT : '.
x_heading-info = PLANT.
append x_heading to t_heading.
IF DATE2 = '00.00.0000'.
CONCATENATE DATE1 'to' DATE1 INTO DT SEPARATED BY SPACE.
ELSE.
CONCATENATE DATE1 'to' DATE2 INTO DT SEPARATED BY SPACE.
ENDIF.
X_heading-TYP = 'S'.
X_heading-key = 'PERIOD :'.
X_heading-INFO = DT.
APPEND x_heading TO t_heading.
Control Date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL NO. :'.
x_heading-info = ' ASDFADDFAAS DATE : 11.04.2007'.
append x_heading to t_heading.
Control date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL DATE : '.
x_heading-info = ''.
append x_heading to t_heading.
Time of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'DATE : '.
write sy-DATUM to x_heading-info.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
FORM get_subtotals.
CLEAR lv_sort.
lv_sort-fieldname = 'MENGE'.
lv_sort-up = 'X'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
*lv_sort-fieldname = 'MENGE'.
*lv_sort-tabname = 'ITS1'.
*lv_sort-subtot = 'X'.
*APPEND lv_sort TO t_sort.
lv_sort-fieldname = 'WRTZL'.
lv_sort-tabname = 'ITS1'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'BUCHM'.
lv_sort-tabname = 'ITS1'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'WRTBM'.
lv_sort-tabname = 'ITS1'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'DIFFQTY'.
lv_sort-tabname = 'ITS1'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
lv_sort-fieldname = 'DIFFVALUE'.
lv_sort-tabname = 'ITS1'.
lv_sort-subtot = 'X'.
APPEND lv_sort TO t_sort.
clear lv_sort.
ENDFORM.
form set_events using t_events type slis_t_event.
data: x_event type line of slis_t_event.
endform.
PLZ HELP ME and definately get rewarded.hi,
how did u declared ur internal table?
Declare a dummy field in your internal table to trigger subtotal text event.
TYPES: BEGIN OF ty_ekpo,
lifnr TYPE ekko-lifnr, "vendor number
ebeln TYPE ekko-ebeln, "purchase document number
ebelp TYPE ekpo-ebelp, "Item Number of Purchasing Document
matnr TYPE ekpo-matnr, "Material Number
bukrs TYPE ekpo-bukrs, "Company Code
werks TYPE ekpo-werks, "Plant
d, "Dummy field to fire the Subtotal text event
END OF ty_ekpo.
Prepare field catalog for that dummyfield also and set attributes like below
wa_fcat-col_pos = 7.
wa_fcat-fieldname = 'D'.
wa_fcat-tabname = 'IT_EKPO'.
wa_fcat-ref_fieldname = 'NETPR'.
wa_fcat-ref_tabname = 'EKPO'.
wa_fcat-no_out = 'X'.
APPEND wa_fcat TO it_fcat.
Fill sortinfo table as follows
wa_sort-spos = 1.
wa_sort-fieldname = 'LIFNR'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = 'X'.
wa_sort-group = 'UL'.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
wa_sort-spos = 2.
wa_sort-fieldname = 'D'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = 'X'.
wa_sort-group = 'UL'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO it_sort.
fill the event table
wa_event-name = 'SUBTOTAL_TEXT'. "--> this event is used to trigger subtotal text
wa_event-form = 'SUBTOTAL'.
APPEND wa_event TO it_event.
*& Form subtotal
FORM subtotal USING i_listhead STRUCTURE wa_ekpo i_subtotal TYPE slis_subtot_text.
READ TABLE it_sort INTO wa_sort WITH KEY fieldname = 'D'.
IF sy-subrc = 0.
IF i_subtotal-criteria = 'D'.
i_subtotal-display_text_for_subtotal = 'Sub total'.
ENDIF.
ENDIF.
ENDFORM. "subtotal
Thanks & REgards -
How to calculate Sub-Totals/Grand Totals on repeating row.
I have a this form that I need to calculate to produce a Sub-Total.... An end user can keep adding a line item but I would like to be able to add the amounts entered to calculate in a sub-total field. So basically, I need help with the actual script that would total the amount calculated from a Quantity*Amount which is -->"Sub Total" column then taking all of those to a new calculating script down to the "Sub-Total" field below it. I probably should rename them because its too similar.. I've tried the recommended scripts from the forums but just could not get it to work.
Excuse my editing...but this is what it looks like. If i need to clean it up so it looks more consistent please let me know if you have any advice. I just started working on acrobat forms 2 days ago and my eyes have gone blurry from reading the help forums
and here's the javascript on my "Sub-Total" (Which should probably be renamed to "Total" and my "Total" to "Grand Total". Any help would be much appreciated. Thanks!Try the LiveCycle Designer forums...
-
Is there anyway i can update subtotal KZWI6 with a value, becasuse of a configuration mistake in the pricing procedure the system took zero value into the sub-total for certain invoices.
Hi,
try to run report (se38) RV15B003
Regards,
JM -
Am getting SUB TOTALS. But, I do NOT wanna show up the GRAND TOTALS in ALV
Hi Experts,
Am getting Sub Totals(line in dim yellow color) for my_alv report.........fine.
But, for some reason, I do NOT wanna to show up the GRAND TOTALS(line in dark yellow color) for my_alv!!
So, pls. let me know, How to get it done?
thanqhi Srinivas,
is_layout-no_totalline = 'X'.
hope this helps
ec -
How to show the subtotal value of a field without showing the rows in ALV?
Dear All,
In my ALV I am showing the sub total value of a calculated field. But the requirement is, only the category and sub total value will be shown in the ALV not the all rows, i,e
CATEGORY VALUE
Z01 186,000 (the subtotal value)
Here, the rows whose values are calculated to 186,000 will not appear. Plz give some idea.
With regards,
Rosaline.Hi
Using the fieldcatalog, you can achieve this.
no_out(1) type c, " (O)blig.(X)no out
use this in fieldcatelog. u can achieve this.
All the best
Edited by: Sudeesh Ravindran on Mar 23, 2011 9:22 AM -
Sum hidden fields in web dynpro ALV reports
Hi everyone
Could anyone tell if it is possible to sum a field that is hidden in an ALV Report in Web Dynpro?
I need to hide a row so as not to be seen by the user (like the filter option) but with the need that the value that is stated in that hidden row must still impact in the Column Total.
Thanks!
FedeHi everyone
Could anyone tell if it is possible to sum a field that is hidden in an ALV Report in Web Dynpro?
I need to hide a row so as not to be seen by the user (like the filter option) but with the need that the value that is stated in that hidden row must still impact in the Column Total.
Thanks!
Fede
Maybe you are looking for
-
The iPod cannot be synced. The Required Folder Cannot Be Found.
I have tried the 5 R's in fixing iPod problems to no avail. I am trying to sync my itunes library with my iPod (40 GB dock connector) I keep getting this error message and since "restoring" my ipod I lost all my songs on the iPod and can't get them b
-
Laser Jet 1536dnf fatal error message while installing driver
HP Laserjet 1536dnf Windows 8.1 64-bit Got the printer a month ago and originally had no problems installing the full package software using the cd that was provided. The printer part worked great. I had to uninstall the software because the scanner
-
System asking me to fill MANDATORY fields, even I used EXIT-COMMAND for F3
HI Experts, issue- there is mandatory field in the screen, so, am using the folllowing code, system asking me to fillup the mandatory field. then, i used exit-command, but, still its asking me to fill the mandatory fiels??????????? code is, process a
-
Anybody have an issue where you have to press the power button on the back extremely hard or even unplug it completely from the power in order for it to turn on?
-
Time Machine Error sparse bundle could not be accessed
Issue: Time Machine Error "the backup disk image "/volumes/data/.sparsebundle" could not be accessed (error -1). Background: I have an '07 iMac with an external WD 1TB hard drive to store video, pictures and music as well as a 1TB Time Capsule to use