Subclips sorting/naming problem
when i split a long captured clip into subclips with the dv-start-stop thingie, i get a bunch of subclips that are named something like
"subclip 1, subclip 2, subclip 3" etc.
problem is, when i open the browser, the sorting does something like
subclip 1
subclip 11
subclip 12
subclip 19
subclip 2
subclip 20
subclip 21
which is really quite confusing.
is there a way to fix this, or change it to include leading 0s when naming subclips?
thanks
okay, thanks for the CatDV tip, i'll look into it later tonight. first glance looks promising, though.
second, i have 30 hours of tapes to capture, and the dvcam deck is a rental.
third, logging and THEN capturing from tape is tedious.
so, i got am extra hard drive (i'm almost at the terrabyte barrier , and load everything at once.
THEN i do scene detection, and end up with about 300 scenes per tape.
now to weed out the stuff i don't want, i'll go through the browser items one at a time. and it's here that this weird sorting gives me headaches, since i'm looking at the tape, i know the sequence of events as they took place, i klick around and then i jump ahead an hour, then back again.
if i can't add a 0, why can't i tell FCP to go by numbers and interpret numbers as such.
anyways ... i guess there's not really a solution except for third party software like CatDV.
thanks for your replies, guys.
Similar Messages
-
Hi,
I have recently updated my iMac from OS x mountain lion to OS X Mavericks.
After that I can't upload any video and some files to my personal email account.
I have tried to send a small video clip to the sender as attachment. i have done this before
with the same video same and same email account. This problem found just after installed the
OS X Movericks. Can anyone please help me to sort this problem.
Thanks.
RomanPlease follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in earlier versions there is only one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
How do I uninstall an application or software from my Macbook Pro? I have been having all sorts of problems updating Adobe Reader and Flash player on my mac that I need to uninstall them so I can re-install them.
Uninstall Flash
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
For Reader search "unistall adobe reader mac" for the version you are running
https://forums.adobe.com/message/4793407 XI
http://helpx.adobe.com/acrobat/kb/installing-uninstalling-acrobat-x-mac.html X -
Sorting records problem in BOE
Hi all.
I have a problem. I have created a new Crystal Reports Report which I uploaded to BOE. I tested it firstly locally in my machine, refreshing it through Crystal Reports at design time. It gives me the results I want.
This reports gets called from another application via URL using the opendocument command. Such application sends the proper parameters to my report when I upload it to BOE. The BOE server connects to the same DatabaseServer which I get connected locally. The problem comes when I execute the Report in BOE through the opendocument command, cause it sorts the records in a different order from the order I get when I run it locally which is a big issue since the main functionality of this report is based on the order it presents the information.
The DataSource for my Report is an Oracle Stored Procedure.
This would be the output of my local Report (It would be clearer if I could upload the PDF file itself, but I'm afraid I can't)
CPM FOP_01 Produccion
CPM FOP_01 C2 Produccion
Cemento Granel Tipo V
Clinker Gris 02 Tipo I
Harina Gris - es
CPM FOP_01 Inventarios
CPM FOP_01 C2 Inventarios Amounts
CPM FOP_01 C2 Inventarios Units
CPM FOP_01 C1 Income
Own production
This would be the output of the Report called from the application. As you can see the record containing CPM FOP_01 C1 Spread should not be placed there, according to my local test
CPM FOP_01 Produccion
CPM FOP_01 C2 Produccion
Cemento Granel Tipo V
Clinker Gris 02 Tipo I
Harina Gris - es
CPM FOP_01 C1 Spread
CPM FOP_01 Inventarios
CPM FOP_01 C2 Inventarios Amounts
CPM FOP_01 C2 Inventarios Units
CPM FOP_01 C1 Income
Own production
The record containing CPM FOP_01 C1 Spread does exist in my report, but should be placed in another section below the section it is placed now.
Besides, the report in BOE is doing weird things such as hiding some totals is should not hide.
I wonder is this has something to do with some sort of problem involving the services, or maybe some cache memory or something alike. I tried as many things as have come to my mind in order to solve this issue, but now I'm out of ideas.
As always, any help will be very useful for me and my team
Edited by: GABRIEL SANCHEZ VALDEZ on Jun 22, 2010 7:11 PMHi Gabriel,
Since you are a BOE user you should also have a support contract. I suggest you log a new case and get a Support engineer working with your directly. Then you can attach the PDF to the case.
Thank you
Don
Also, I am moving this post to the BOE forum. -
Hi.
I have music sync'd via iTunes Match from my laptop to my iPad and to my iPhone. The names and order appear correct on both the laptop and on the iPad but on the iPhone several artists are either shown in all lower case or the last name will be used by the sort, rather than the first.
I've reset the artist, album artist and sort artist tags to different names (and they show up correctly then on the iPhone) and then set them back, but the problem remains.
I'm thinking that the iPhone has a corrupt file somewhere - but how can I reset that without losing everything on the phone?
A factory reset and restore from iCloud results in the same problem.
Any ideas?
Thanks guys.
--Cynan.I also have an Artist sort order problem. While the circumstances are quite different from yours, I wonder if it's due to a similar corruption problem. I don't use iTunes Match. I found Kenny G listed under letter T.
-
This is my Server Program
import javax.swing.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.awt.*;
import java.awt.event.*;
class Validation
Object object;
public static Vector v1=new Vector(1,1);
Vector vctUsername = new Vector(1,1);
public Validation(String ipAddress1, String message1)
message1.trim();
if(checkIP(ipAddress1))
else
v1.add(ipAddress1);
System.out.println("IP Added");
String check = new String(String.valueOf(message1.charAt(0)));
if(message1.length()==0)
else if(message1.equals("A"))
System.out.println("Join in Message .. not to be sent");
else if(check.equals("�"))
StringTokenizer str = new StringTokenizer(message1,"�");
String username13 = (str.nextToken());
String dust13 = (str.nextToken());
System.out.println(dust13);
if(dust13.equals(new String(" has joined the conversation")));
System.out.println(username13);
vctUsername.add(username13);
NewServer.listNames.setListData(vctUsername);
else
for(int i=0; i<v1.size(); i++)
try
object = v1.elementAt(i);
Socket socket = new Socket(object.toString(),4001);
System.out.println("Connection formed with Client "+object.toString());
ObjectOutputStream toClient = null;
toClient = new ObjectOutputStream(socket.getOutputStream());
toClient.writeObject(message1);
toClient.flush();
System.out.println("Message "+message1+"to IP -- "+object.toString());
toClient.close();
socket.close();
catch(ConnectException e1)
for(int ii=0; ii<v1.size(); ii++)
Object object1 = v1.elementAt(ii);
if(object1.toString().equals(object.toString()))
v1.removeElementAt(ii);
vctUsername.removeElementAt(ii);
NewServer.listNames.setListData(vctUsername);
else
catch(Exception e)
System.out.println("Error : "+e);
public boolean checkIP(String ipAddress2)
for(int i=0; i < v1.size(); i++)
Object object = v1.elementAt(i);
if(object.toString().equals(ipAddress2))
return true;
return false;
public class NewServer
public static JList listNames;
private ServerSocket chatSocket;
public NewServer()
Object object;
JFrame frameMain = new JFrame("Server");
JPanel panelMain = new JPanel();
JTextArea textAreaDisplay = new JTextArea(25,50);
JScrollPane scrollPaneBoard = new JScrollPane(textAreaDisplay);
listNames = new JList();
frameMain.getContentPane().add(panelMain);
frameMain.setVisible(true);
frameMain.setSize(200,200);
panelMain.add(scrollPaneBoard);
panelMain.add(listNames);
textAreaDisplay.setLineWrap(true);
try
chatSocket = new ServerSocket(4000);
catch(BindException e)
JOptionPane.showMessageDialog(frameMain, new String("Port Address in use"));
System.exit(0);
catch(Exception e)
System.out.println("Error 1 "+e);
while(true)
try
System.out.println("Waiting for connections .. ");
Socket client = chatSocket.accept();
String inetAddress = String.valueOf(client.getInetAddress());
StringTokenizer str = new StringTokenizer(inetAddress,"/");
String hostName = (str.nextToken());
String ipAddress = (str.nextToken());
System.out.println("Accepted connection from : "+hostName+" : "+ipAddress);
new Validation(ipAddress, "A");
try
ObjectInputStream fromClient = null;
client.setSoTimeout(1000);
fromClient = new ObjectInputStream(client.getInputStream());
String x;
x = (String) fromClient.readObject();
textAreaDisplay.append(x);
textAreaDisplay.append("\n");
new Validation(ipAddress, x);
catch(Exception e)
System.out.println("Error 3 "+e);
catch(NullPointerException e)
JOptionPane.showMessageDialog(frameMain, new String("An unexpected error occured while starting the Server -- Error - "+e));
System.exit(0);
catch(Exception e)
System.out.println("Error 2 "+e);
public static void main(String args[])
new NewServer();
this is my Client Program
import java.io.*;
import java.awt.event.*;
import java.awt.*;
import java.net.*;
import javax.swing.*;
public class NewClient
JFrame frameMain1;
JPanel panelMain1;
JTextArea textAreaDisplay;
JScrollPane scrollPaneDisplay;
JTextField textFieldMessage;
Socket socket;
ObjectInputStream fromServer;
ServerSocket inputServerSocket;
String username123;
public NewClient(String username12)
frameMain1 = new JFrame("Client");
panelMain1 = new JPanel();
textAreaDisplay = new JTextArea(25,50);
scrollPaneDisplay = new JScrollPane(textAreaDisplay);
textAreaDisplay.setLineWrap(true);
panelMain1.add(scrollPaneDisplay);
System.out.println("coming 1");
textFieldMessage = new JTextField(50);
panelMain1.add(textFieldMessage);
textFieldMessage.addKeyListener(new listener());
frameMain1.getContentPane().add(panelMain1);
frameMain1.setSize(200,200);
frameMain1.setVisible(true);
System.out.println("coming 3");
try
socket = new Socket("192.168.16.1",4000);
inputServerSocket = new ServerSocket(4001);
ObjectOutputStream toServer = new ObjectOutputStream(socket.getOutputStream());
toServer.writeObject("� "+username12+" � has joined the conversation");
toServer.flush();
toServer.close();
catch(UnknownHostException e)
JOptionPane.showMessageDialog(frameMain1, new String("Host Not Found "+e));
System.exit(0);
catch(ConnectException e)
JOptionPane.showMessageDialog(frameMain1, new String("Connection Failed Because "+e));
System.exit(0);
catch(BindException e)
JOptionPane.showMessageDialog(frameMain1, new String("Client Application already running or Port in use"));
System.exit(0);
catch(Exception e)
JOptionPane.showMessageDialog(frameMain1, new String("An unexpected Error occured "+e));
System.exit(0);
try
while(true)
Socket listener = inputServerSocket.accept();
ObjectInputStream fromClient = null;
listener.setSoTimeout(1000);
fromServer = new ObjectInputStream(listener.getInputStream());
String input = (String) fromServer.readObject();
textAreaDisplay.append("\n");
textAreaDisplay.append(input);
fromServer.close();
listener.close();
catch(Exception e)
JOptionPane.showMessageDialog(frameMain1, new String("An unexpected Error occured "+e));
class listener implements KeyListener
public void keyTyped(KeyEvent e)
public void keyReleased(KeyEvent e)
public void keyPressed(KeyEvent e)
int code = e.getKeyCode();
if(code == KeyEvent.VK_ENTER)
String message12 = textFieldMessage.getText();
message12.trim();
if(message12.length()==0)
else
try
Socket socket1;
socket1 = new Socket("192.168.16.1",4000);
ObjectOutputStream toServer = new ObjectOutputStream(socket1.getOutputStream());
String messageTyped;
messageTyped = (username123+" says::"+message12);
toServer.writeObject(messageTyped);
toServer.flush();
textFieldMessage.setText("");
toServer.close();
socket1.close();
catch(ConnectException e1)
JOptionPane.showMessageDialog(frameMain1, new String("Server Down"));
System.exit(0);
catch(Exception e2)
JOptionPane.showMessageDialog(frameMain1, new String("Error : "+e2));
System.exit(0);
public static void main(String args[])
new NewClient("Guest_Null");
and this is the program ...thru which i am calling ... Newclient
import java.awt.event.*;
import javax.swing.*;
import java.awt.*;
import java.sql.*;
public class Prashant extends JFrame
//----frameMain objects
JFrame frameMain = new JFrame("");
//----panelMain objects
JPanel panelMain = new JPanel();
CardLayout c1 = new CardLayout();
//----panelAdministrator
JPanel panelAdministrator = new JPanel();
JTable table = new JTable();
//----panelWelcome objects
JPanel panelWelcome = new JPanel();
String stringFirstName2 = new String("User");
JLabel labelFirstName1=new JLabel("");
//----panelLogin objects
JPanel panelLogin = new JPanel();
JLabel labelUsername2 = new JLabel("Username");
JTextField textFieldUsername2 = new JTextField(10);
JLabel labelPassword1 = new JLabel("Password");
JPasswordField passwordFieldPassword1 = new JPasswordField(10);
JButton buttonLogin = new JButton("Login");
JButton buttonNewUser = new JButton("New User, Sign Up");
//----panelInsertData objects
JPanel panelInsertData = new JPanel();
JLabel labelUsername1 = new JLabel("Username");
JTextField textFieldUsername1 = new JTextField(10);
JLabel labelPassword = new JLabel("Password");
JPasswordField passwordFieldPassword = new JPasswordField(10);
JLabel labelReTypePassword = new JLabel("Re-Type Password");
JPasswordField passwordFieldReTypePassword = new JPasswordField(10);
JLabel labelFirstName = new JLabel("First Name");
JTextField textFieldFirstName = new JTextField(10);
JLabel labelLastName = new JLabel("Last Name");
JTextField textFieldLastName = new JTextField(10);
JLabel labelPhoneNumber = new JLabel("Phone Number");
JTextField textFieldPhoneNumber = new JTextField(10);
JLabel labelAddress = new JLabel("Address");
JTextArea textAreaAddress = new JTextArea("",10,10);
JScrollPane scrollPaneAddress = new JScrollPane(textAreaAddress);
ClickListen ClickListener = new ClickListen();
JButton buttonSubmit = new JButton("Submit");
//----panelRetieveData objects
JPanel panelRetieveData = new JPanel();
JButton testButton = new JButton("Retieve Data");
//----panelUsernameSearch
JPanel panelUsernameSearch = new JPanel();
JLabel labelUsername = new JLabel("Username");
JTextField textFieldUsername = new JTextField(10);
JButton buttonCheckForAvailability = new JButton("Check");
public void frameMain()
frameMain.setResizable(true);
public void panelMainClass()
frameMain.getContentPane().add(panelMain);
panelMain.setLayout(c1);
public void panelWelcome()
panelMain.add(panelWelcome, "panelWelcome");
panelWelcome.setLayout(null);
panelWelcome.add(labelFirstName1);
labelFirstName1.setBounds(10,10,200,25);
public void panelAdministrator()
panelMain.add(panelAdministrator,"panelAdministrator");
panelAdministrator.add(table);
public void panelLogin()
frameMain.setSize(195,160);
frameMain.setVisible(true);
panelLogin.setLayout(null);
panelMain.add(panelLogin, "panelLogin");
c1.show(panelMain, "panelLogin");
panelLogin.add(labelUsername2);
labelUsername2.setBounds(10,10,100,25);
panelLogin.add(textFieldUsername2);
textFieldUsername2.setBounds(75,10,100,25);
panelLogin.add(labelPassword1);
labelPassword1.setBounds(10,40,100,25);
panelLogin.add(passwordFieldPassword1);
passwordFieldPassword1.setBounds(75,40,100,25);
panelLogin.add(buttonLogin);
buttonLogin.setBounds(10,70,165,25);
buttonLogin.addActionListener(ClickListener);
panelLogin.add(buttonNewUser);
buttonNewUser.setBounds(10,100,165,25);
buttonNewUser.addActionListener(ClickListener);
public void panelUsernameSearch()
panelMain.add(panelUsernameSearch,"panelUsernameSearch");
panelUsernameSearch.setLayout(null);
panelUsernameSearch.add(labelUsername);
labelUsername.setBounds(10,10,60,25);
panelUsernameSearch.add(textFieldUsername);
textFieldUsername.setBounds(75,10,100,25);
panelUsernameSearch.add(buttonCheckForAvailability);
buttonCheckForAvailability.setBounds(10,40,165,25);
buttonCheckForAvailability.addActionListener(ClickListener);
public void panelInsertDataClass()
panelInsertData.setLayout(null);
panelMain.add(panelInsertData, "panelInsertData");
labelUsername1.setBounds(10,10,100,25);
panelInsertData.add(labelUsername1);
textFieldUsername1.setBounds(115,10,100,25);
textFieldUsername1.setEnabled(false);
textFieldUsername1.setText("Prashant");
panelInsertData.add(textFieldUsername1);
labelPassword.setBounds(10,40,100,25);
panelInsertData.add(labelPassword);
passwordFieldPassword.setBounds(115,40,100,25);
panelInsertData.add(passwordFieldPassword);
labelReTypePassword.setBounds(10,70,100,25);
panelInsertData.add(labelReTypePassword);
passwordFieldReTypePassword.setBounds(115,70,100,25);
panelInsertData.add(passwordFieldReTypePassword);
labelFirstName.setBounds(10,100,100,25);
panelInsertData.add(labelFirstName);
textFieldFirstName.setBounds(115,100,100,25);
panelInsertData.add(textFieldFirstName);
labelLastName.setBounds(10,130,100,25);
panelInsertData.add(labelLastName);
textFieldLastName.setBounds(115,130,100,25);
panelInsertData.add(textFieldLastName);
labelPhoneNumber.setBounds(10,160,100,25);
panelInsertData.add(labelPhoneNumber);
textFieldPhoneNumber.setBounds(115,160,100,25);
panelInsertData.add(textFieldPhoneNumber);
labelAddress.setBounds(10,190,100,25);
panelInsertData.add(labelAddress);
textAreaAddress.setLineWrap(true);
scrollPaneAddress.setBounds(115,190,100,75);
panelInsertData.add(scrollPaneAddress);
panelInsertData.add(buttonSubmit);
buttonSubmit.addActionListener(ClickListener);
buttonSubmit.setBounds(10,270,205,25);
public void panelRetieveDataClass()
panelMain.add(panelRetieveData, "panelRetieveData");
panelRetieveData.add(testButton);
class ClickListen implements ActionListener
public void actionPerformed(ActionEvent evt)
Object obj = evt.getSource();
if(obj==buttonLogin)
String stringUsername2 = new String(textFieldUsername2.getText());
if(stringUsername2.length()==0)
JOptionPane.showMessageDialog(frameMain, new String("Username field cannot be left empty"));
else
String stringPassword1 = new String(passwordFieldPassword1.getPassword());
if(stringPassword1.length()==0)
JOptionPane.showMessageDialog(frameMain,new String("Password field cannot be left empty"));
else
if(stringUsername2.equals("Administrator"))
if(stringPassword1.equals("Prashant"))
JOptionPane.showMessageDialog(frameMain,new String("Welcome Mr.Prashant"));
c1.show(panelMain, "panelAdministrator");
else
JOptionPane.showMessageDialog(frameMain,new String("Invalid Password"));
else
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con2;
con2 = DriverManager.getConnection("jdbc:odbc:prashant","user1","");
PreparedStatement stat2 = con2.prepareStatement("select * from prashant_registration where username = ? AND cpassword = ?");
stat2.setString(1, stringUsername2);
stat2.setString(2, stringPassword1);
ResultSet result;
result = stat2.executeQuery();
if(result.next())
JOptionPane.showMessageDialog(frameMain,new String("Login successful"));
stringFirstName2 = result.getString(3);
labelFirstName1.setText("Welcome "+stringFirstName2);
new NewClient(stringUsername2);
c1.show(panelMain, "panelWelcome");
else
JOptionPane.showMessageDialog(frameMain,new String("Login Failed"));
textFieldUsername2.setText("");
passwordFieldPassword1.setText("");
catch(Exception e)
System.out.println("error" +e);
if(obj==buttonNewUser)
c1.show(panelMain, "panelUsernameSearch");
frameMain.setSize(190,100);
frameMain.setVisible(true);
if(obj==buttonCheckForAvailability)
String stringUsername = textFieldUsername.getText();
if(stringUsername.length()==0)
JOptionPane.showMessageDialog(frameMain,new String("Username cannot be left blank"));
else
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con1;
con1 = DriverManager.getConnection("jdbc:odbc:prashant","user1","");
PreparedStatement stat1 = con1.prepareStatement("select * from prashant_registration where username = ?");
stat1.setString(1, textFieldUsername.getText());
ResultSet result;
result = stat1.executeQuery();
if(result.next())
JOptionPane.showMessageDialog(frameMain,new String("Username is not Avaiable, Click Ok, to choose someother username"));
textFieldUsername.setText("");
else
JOptionPane.showMessageDialog(frameMain, new String("Username is available, Click Ok, to move to the next step"));
textFieldUsername1.setText(textFieldUsername.getText());
frameMain.setSize(230,330);
frameMain.setVisible(true);
c1.show(panelMain, "panelInsertData");
catch(SQLException sqlex)
System.out.println ("SQLState: " + sqlex.getSQLState () + "");
System.out.println ("Message: " + sqlex.getMessage() + "");
System.out.println ("Vendor ErrorCode: " + sqlex.getErrorCode() + "");
catch(Exception ex1)
System.out.println("Error ex1" +ex1);
if(obj==buttonSubmit)
String stringPassword = new String(passwordFieldPassword.getPassword());
if(stringPassword.length()==0)
JOptionPane.showMessageDialog(frameMain, new String("Password field cannot be left empty"));
else
String stringReTypePassword = new String(passwordFieldReTypePassword.getPassword());
if(stringReTypePassword.length()==0)
JOptionPane.showMessageDialog(frameMain, new String("Please ReType the password"));
else
if(stringPassword.equals(stringReTypePassword))
if((new String(textFieldFirstName.getText())).length()==0)
JOptionPane.showMessageDialog(frameMain,new String("FirstName cannot be left blank"));
else
if((new String(textFieldLastName.getText())).length()==0)
JOptionPane.showMessageDialog(frameMain,new String("LastName cannot be left blank"));
else
if((new String(textFieldPhoneNumber.getText())).length()==0)
JOptionPane.showMessageDialog(frameMain,new String("Phone Number cannot be left blank"));
else
if((new String(textAreaAddress.getText())).length()==0)
JOptionPane.showMessageDialog(frameMain,new String("Address Cannot Be Left Blank"));
else
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con;
con = DriverManager.getConnection("jdbc:odbc:prashant","user1","");
PreparedStatement stat2 = con.prepareStatement("insert prashant_registration values(?,?,?,?,?,?, getDate(), getDate())");
stat2.setString(1,textFieldUsername1.getText());
stat2.setString(2,stringPassword);
stat2.setString(3,textFieldFirstName.getText());
stat2.setString(4,textFieldLastName.getText());
stat2.setString(5,textFieldPhoneNumber.getText());
stat2.setString(6,textAreaAddress.getText());
stat2.executeUpdate();
JOptionPane.showMessageDialog(frameMain,new String("Your Details have been registered"));
c1.show(panelMain, "panelRetieveData");
catch(SQLException ex)
System.out.println ("SQLState: " + ex.getSQLState () + "");
System.out.println ("Message: " + ex.getMessage() + "");
System.out.println ("Vendor ErrorCode: " + ex.getErrorCode() + "");
catch(Exception e)
JOptionPane.showMessageDialog(frameMain,new String("Error encountered while entering data in the database: "+e));
else
JOptionPane.showMessageDialog(frameMain,new String("Passwords doesnt match"));
public static void main(String args[])
Prashant prashant = new Prashant();
prashant.frameMain();
prashant.panelMainClass();
prashant.panelLogin();
prashant.panelWelcome();
prashant.panelAdministrator();
prashant.panelUsernameSearch();
prashant.panelInsertDataClass();
prashant.panelRetieveDataClass();
I dont know what the problem is .... the Client program's frame is EMPTY
my faculty and my fellow programmers said ...the program is getting hanged or something is getting overlapped
please try and let me know what could be the possible problem could be .... people in here and myself ..couldnt solve it ... because i am not getting any error message or exception ... so it is a
**Un-Named Problem**
I will be really thankful to you ...if u could help me outWhen you post code, please use [code] and [/code] tags as described in Formatting Help on the message entry page. It makes it much easier to read.
-
I am so fed up with using time machine to restore my files from my previous mini. I have tried several different ways and every time there is some sort of problem. I just want to restore it back to the original setting and manually reinstall my personal software. My question is: Is it better to reinstall osx using the recovery drive or downloaded from the app store. Also if you have already reinstalled from the app store does that effect the recovery drive?
It does not make any difference it you reinstall from recovery partition or app store since in either case the OSX install files are downloaded from Apple servers.
What problems (error message?) are you gettng whenb trying to restore form TM? -
hi, i am using an amendment method to sort named query results, it works fine for the queries that takes no parameters , but when it comes to a parameterized named query it doesn't work, any idea?
hi, thank you for your reply,
1- this is the code of the amendment method:
ReadAllQuery raq =
(ReadAllQuery)descriptor.getDescriptorQueryManager().getQuery("findUsersByCompany");
raq.addDescendingOrdering("name");
2- what do you mean but how do i execute the query?
actually i have wrapped the named query in a session bean method, and i have simply dragged the method from the data control into my web page in a readonly table, i pass the parameter in a static manner in the page definition
3- the result is displayed, no error is showed but it's not ordered correctly
!!! -
MY MACBOOK PRO NEVER LETS ME OPEN AUTOTRADER AND WHEN I TRY TO OPEN IT GETS FROZEN AND IT FREEZES OTHER WINDOWS AS WELL. Please help me to sort this problem out asap. Thanks
To prevent this being accidentally activated in the future go to SystemPreferences>Keyboard>Keyboard Shortcuts>Universal Access and uncheck all the boxes.
-
TestStand sub-sequence naming problem: "Step" column doesn't match "View" menu
Refer to the attached screenshoot; when I rename the sub-sequences in the "Step" column to the left, these names don't show up in the "View" menu pull-down list shown on the right. What's going on here?
All my sequences are in one .seq file.
Attachments:
Sequence Naming Problem.gif 31 KBThey're not supposed to. When you rename a step, that's not the same thing as renaming a sub-sequence. Say you have a sub-sequence called x, you could have steps called "call sequence x_1", "call sequence x_2", "call sequence x_3", etc., all calling the same sub-sequence. It's no different than the different labels you might have every time you call a pass/fail step.
-
Hard drive replacement, now all sorts of problems
A couple weeks ago my hard drive crashed. I confirmed at the Apple store that it was the hard drive, and they gave me instructions on how to put a new one in.
Since I've put the new one in I've had all sorts of problems.
1. My previously totally fine battery doesn't show up at all. Though the battery says it's fully charged, the laptop says that no battery is available.
2. DVDs don't play. The DVD player gets rolling, and then freezes.
3. Photobooth doesn't load "because the camera is in use by another application".
4. My external sound input/output can't be recognized or set up though the driver (also because the IOdirect is "in use").
5. The computer won't completely shut down sometimes and freezes on the blue screen just prior to complete shut down.
I've wiped the hard drive and started over to the same results.
Please, any help?Have you fixed you problem yet?
1. Have you checked to make sure that the drive is plugged in properly and setting on the proper mounts that were on the old drive?
2. How did you go about putting the OS OSX on the newly installed drive? Ex. Did you install OSX and all you applications then then restored you personal data from a backup? Did you use Time Machine to restore OSX and all data to the new drive? Or did you use a previously cloned drive, along with a program such as SuperDuper or Carbon Copy Clone, to restore to the new drive? -
I just upgraded to iTunes 12 and had all sorts of problems. After several restores I seem to be able to sync my iPad with iTunes BUT I can't delete anything off my iPad from iTunes. Any ideas on what to do?
-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....
-
CREATING SUBCLIPS - WITH SOUNDTRACK PROBLEMS
Hello I am creating a series of sub-clips on one of my editing projects, so far the process is really smooth, but with one interview clip that is probably 6 minutes long and that i want to break up on some more specific multi-clips I had a problem with the associated soundtrack, every time that I found some portion of the interview that I wan to isolate I go and mark my IN and OUT points them I go to Modify and Create Sub-clip, everything works just fine, but when I load the new sub-clip on the Viewer and I play it the sound goes perfectly the firs 5 seconds or so, but right that moment the sync is cut off and the sound track stars from the very beginning of the whole master clip.
Does anybody have an idea why this happens and how can you get around and fix it, cause it seems pretty random since the other two interviews that I had upload into FCP work just fine when I have made sub-clips out them.
Thanks
Message was edited by: kuthulHi,
I came across the same problem today. I tried creating the subclip again but this time without special characters (except a period) in my title for naming the subclip and it seems to be working fine.
When I was naming the document i was using something like,
1. How DId Global Ethics Come About?
I got an issue with this, so I dropped the use of the special character (?) and it solved my problem. I'm not sure if this will work for you but I thought I'd stick it up.
Best wishes. -
iTunes requires me to answer to a couple of security questions to authorize me to use it on my new mac book pro, but I don't rimember the answer to them. I can I sort out this problem?
Thank you for helping...
Danila63 Account Security Team (AST)
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team. -
Hello Last night while watching a video on Facebook a pop up window said I had a virus and to clean it click on the link. I did so and followed a prompt or 2 and then I thought this was a scam so I stopped. However I looked at my download file and it shows Mackeeper listed 4 times. Does this mean I have installed MacKeeper and if so does this mean I have installed some sort of malware/spyware or problems for my computer hence for myself.
Thank you for your help
MaureentreCheck version: 2.1.3 (106)
Report generated 17 December, 2014 7:58:37 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
Mac OS X 10.7.5 (11G63) - Uptime: 0:4:21
Disk Information: ℹ️
WDC WD5000BPKT-00PK4T0 disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.76 GB (396.19 GB free)
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Safari Application (/Applications/Safari.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.1
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
8% helpd
3% Safari
2% WindowServer
0% fontd
0% ps
Top Processes by Memory: ℹ️
116 MB Safari
73 MB Finder
71 MB Officejet_Pro_8600
56 MB mds
30 MB WindowServer
Virtual Memory Information: ℹ️
2.72 GB Free RAM
751 MB Active RAM
196 MB Inactive RAM
356 MB Wired RAM
197 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 17, 2014, 07:54:53 AM Self test - passed
Here it is Mike. Let me know !! thanks TONS .. Maureen
Maybe you are looking for
-
What is difference btw project Assignment, Resource Assignment and task Assignment.
Hi, I am new project accounting Module . what is difference btw project Assignment, Resource Assignment and task Assignment.
-
I am a realtor in Washington and have been frustrated that I can not use the MLS on my new macbook. I do have a copy of XP. Can someone tell me how I can tell if it has SP2 on it? The version I have is 2002. If it does not have SP2, is there a way to
-
[BUG] Agilent ESA PSA Series LabVIEW driver for Models E4401B and E4402B
Agilent ESA PSA Series LabVIEW driver are not working with Models E4401B and E4402B. Driver Version 2.1.1 LabVIEW: 2009 Web Link: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=309EBE8FF8BC0E76E0440003BA7CCD... Problem: ID Quer
-
I captured a 12 minutes clip using Capture Now in FCE 3.5 from my PAL camcorder Canon MVX4i (=Optura 600). This is the first time it happens to me: the captured clip has the audio portion out of sync with respect to the video by 5 frames. So, the aud
-
Apple ProRes 422 (HQ) in Adobe Media Encoder
I have Adobe Premiere Pro and Final Cut Pro installed on my mac. I need to export as Apple ProRes 422 (HQ) in Adobe Media Encoder. I have found the Apple ProRes 422 (HQ) in Premiere Pro. But only ProRes 422 and ProRes 422 (LT) are listed in Encoder.